All Stories

  1. Infrared Defect Detection in Wind Turbine Blades

    Article • e-Journal of Nondestructive Testing, February 2026, NDT.net

    Dr. Clemente Ibarra-Castanedo

  2. Experimental and numerical research of debonding defects detection in fiber metal laminates using low-power ultrasonic-induced thermography

    Article • Composites Part B Engineering, January 2026, Elsevier

    Dr. Clemente Ibarra-Castanedo

  3. Thermal diffusivity characterization of impacted composites using evaporative cryocooling excitation and inverse physics-informed neural networks

    Article • IEEE Transactions on Instrumentation and Measurement, January 2026, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Clemente Ibarra-Castanedo

  4. Thermal Diffusivity Measurement Based on Thermal/Cooling Excitation: Theory and Experiments

    Article • IEEE Transactions on Instrumentation and Measurement, January 2026, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Clemente Ibarra-Castanedo

  5. Defect Detection in Wind Turbine Blades Using Infrared Thermography, Image Processing, and U-Net

    Article • September 2025, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  6. A comprehensive evaluation of the low-velocity impact behaviour of intraply hybrid flax/basalt composites using infrared thermography and terahertz time-domain spectroscopy techniques

    Article • NDT & E International, September 2025, Elsevier

    Dr. Clemente Ibarra-Castanedo

  7. Multi-modal analysis of barely visible impact damage in carbon fibre composites through the fusion of Pulsed Thermography and Phased Array Ultrasonic Testing

    Article • Quantitative InfraRed Thermography Journal, July 2025, Taylor & Francis

    Dr. Clemente Ibarra-Castanedo

  8. Non-Destructive Testing and Evaluation of Hybrid and Advanced Structures: A Comprehensive Review of Methods, Applications, and Emerging Trends

    Article • Sensors, June 2025, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  9. High-quality, low-quantity: A data-centric approach to deep learning performance optimization in digital X-Ray radiography

    Article • NDT & E International, June 2025, Elsevier

    Dr. Clemente Ibarra-Castanedo

  10. Non-Destructive Testing and Evaluation of Hybrid and Advanced Structures: A Comprehensive Review of Methods, Applications, and Emerging Trends

    Article • May 2025, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  11. Advanced Diagnostics of Aircraft Structures Using Automated Non-Invasive Imaging Techniques: A Comprehensive Review

    Article • Applied Sciences, March 2025, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  12. Integration of thermographic inspection data with BIM for enhanced concrete infrastructure assessment

    Article • Automation in Construction, March 2025, Elsevier

    Dr. Clemente Ibarra-Castanedo

  13. Frequency multiplexed photothermal correlation tomography for non-destructive evaluation of manufactured materials

    Article • International Journal of Extreme Manufacturing, January 2025, Tsinghua University Press

    Hai Zhang, Dr. Clemente Ibarra-Castanedo

  14. Real-Time Super-Resolution Imaging System Based on Zero-Shot Learning for Infrared Non-Destructive Testing

    Article • IEEE Transactions on Instrumentation and Measurement, January 2025, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Clemente Ibarra-Castanedo

  15. Advanced Defect Detection on Curved Aeronautical Surfaces Through Infrared Imaging and Deep Learning

    Article • NDT, December 2024, MDPI AG

    Sreedhar Unnikrishnakurup, Dr. Clemente Ibarra-Castanedo

  16. Automated Defect Detection through Flaw Grading in Non-Destructive Testing Digital X-ray Radiography

    Article • NDT, October 2024, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  17. Methods for Corrosion Detection in Pipes Using Thermography: A Case Study on Synthetic Datasets

    Article • Algorithms, October 2024, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  18. Enhancing concrete defect segmentation using multimodal data and Siamese Neural Networks

    Article • Automation in Construction, October 2024, Elsevier

    Dr. Clemente Ibarra-Castanedo

  19. An Autonomous Monitoring System with Microwatt Technology for Exploring the Lives of Arctic Subnivean Animals

    Article • Electronics, August 2024, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  20. Advancements in and Research on Coplanar Capacitive Sensing Techniques for Non-Destructive Testing and Evaluation: A State-of-the-Art Review

    Article • Sensors, August 2024, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  21. A Complementary Fusion-Based Multimodal Non-Destructive Testing and Evaluation Using Phased-Array Ultrasonic and Pulsed Thermography on a Composite Structure

    Article • Materials, July 2024, MDPI AG

    Dr. Clemente Ibarra-Castanedo, Dr Argyrios C Zolotas

  22. Advancements and Research in Coplanar Capacitive Sensing Techniques for Non-Destructive Testing and Evaluation: A State-of-the-Art Review

    Article • July 2024, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  23. Robust Multi-Modal Image Registration for Image Fusion Enhancement in Infrastructure Inspection

    Article • Sensors, June 2024, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  24. Deep Learning-Based Superpixel Texture Analysis for Crack Detection in Multi-Modal Infrastructure Images

    Article • NDT, June 2024, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  25. Advanced Image Stitching Method for Dual-Sensor Inspection

    Article • Sensors, June 2024, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  26. Enhancing resistance to low-velocity impact of electrospun-manufactured interlayer-strengthened CFRP by using infrared thermography

    Article • NDT & E International, June 2024, Elsevier

    Dr. Clemente Ibarra-Castanedo

  27. Enhancing Moisture-Induced Defect Detection in Insulated Steel Pipes through Infrared Thermography and Hybrid Dataset

    Article • Electronics, May 2024, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  28. Passive infrared thermography for subsurface delamination detection in concrete infrastructure: Capabilities

    Article • Construction and Building Materials, March 2024, Elsevier

    Dr. Clemente Ibarra-Castanedo

  29. Towards Enhancing Automated Defect Recognition (ADR) in Digital X-ray Radiography Applications: Synthesizing Training Data through X-ray Intensity Distribution Modeling for Deep Learning Algorithms

    Article • Information, December 2023, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  30. Towards Enhancing Automated Defect Detection (ADR) in Digital X-ray Radiography Applications: Synthesizing Training Data Through X-ray Intensity Distribution Modeling for Deep Learning Algorithms

    Article • December 2023, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  31. A reliability study on automated defect assessment in optical pulsed thermography

    Article • Infrared Physics & Technology, November 2023, Elsevier

    Dr. Clemente Ibarra-Castanedo

  32. Thermal Data Augmentation Approach for the Detection of Corrosion in Pipes Using Deep Learning and Finite Element Modelling

    Article • October 2023, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  33. Enhancing the Thermal Inspection of Buildings Using Texture Analysis

    Article • October 2023, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  34. Detection and Characterization of Artificial Porosity and Impact Damage in Aerospace Carbon Fiber Composites by Pulsed and Line Scan Thermography

    Article • Applied Sciences, May 2023, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  35. Automatic Detection and Identification of Defects by Deep Learning Algorithms from Pulsed Thermography Data

    Article • Sensors, May 2023, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  36. Deep Learning Neural Network Performance on NDT Digital X-ray Radiography Images: Analyzing the Impact of Image Quality Parameters—An Experimental Study

    Article • Sensors, April 2023, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  37. Defect Detection and Depth Estimation in Composite Materials for Pulsed Thermography Images by Nonuniform Heating Correction and Oriented Gradient Information

    Article • Materials, April 2023, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  38. Deep Learning Neural Network Performance on NDT Digital X-ray Radiography Images: Analyzing the Impact of Image Quality Parameters - An Experimental Study

    Article • April 2023, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  39. Texture Analysis to Enhance Drone-Based Multi-Modal Inspection of Structures

    Article • Drones, December 2022, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  40. Autonomous dynamic line-scan continuous-wave terahertz non-destructive inspection system combined with unsupervised exposure fusion

    Article • NDT & E International, December 2022, Elsevier

    Dr. Clemente Ibarra-Castanedo

  41. Automated Impact Damage Detection Technique for Composites Based on Thermographic Image Processing and Machine Learning Classification

    Article • Sensors, November 2022, MDPI AG

    Dr. Clemente Ibarra-Castanedo, Dr Argyrios C Zolotas

  42. Multi-label classification algorithms for composite materials under infrared thermography testing

    Article • Quantitative InfraRed Thermography Journal, October 2022, Taylor & Francis

    Dr. Clemente Ibarra-Castanedo, Dr Argyrios C Zolotas

  43. Experimental Study and FEM Simulations for Detection of Rebars in Concrete Slabs by Coplanar Capacitive Sensing Technique

    Article • Sensors, July 2022, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  44. Development of a thermal excitation source used in an active thermographic UAV platform

    Article • Quantitative InfraRed Thermography Journal, June 2022, Taylor & Francis

    Dr. Clemente Ibarra-Castanedo, Dr Argyrios C Zolotas

  45. Machine learning on thermographic images for the detection and classification of damage on composites

    Article • May 2022, SPIE

    Dr. Clemente Ibarra-Castanedo

  46. Latent Low Rank Representation Applied to Pulsed Thermography Data For Carbon Fibre Reinforced Polymer Inspection

    Article • Quantitative InfraRed Thermography Journal, May 2022, Taylor & Francis

    Dr. Clemente Ibarra-Castanedo

  47. Application of blind image quality assessment metrics to pulsed thermography

    Article • Quantitative InfraRed Thermography Journal, May 2022, Taylor & Francis

    Dr. Clemente Ibarra-Castanedo

  48. Multi-Electrode Coplanar Capacitive Probe With Various Arrangements for Non-Destructive Testing of Materials

    Article • IEEE Sensors Journal, April 2022, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Clemente Ibarra-Castanedo

  49. Influence of different design parameters on a coplanar capacitive sensor performance

    Article • NDT & E International, March 2022, Elsevier

    Dr. Clemente Ibarra-Castanedo

  50. On the use of pulsed thermography signal reconstruction based on linear support vector regression for carbon fiber reinforced polymer inspection

    Article • Quantitative InfraRed Thermography Journal, February 2022, Taylor & Francis

    Dr. Clemente Ibarra-Castanedo

  51. Automated Defect Detection in Non-planar Objects Using Deep Learning Algorithms

    Article • Journal of Nondestructive Evaluation, January 2022, Springer Science + Business Media

    Dr. Clemente Ibarra-Castanedo

  52. Convex Factorization Embedding Thermography for Breast Cancer Diagnostic

    Article • IEEE Open Journal of Instrumentation and Measurement, January 2022, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Clemente Ibarra-Castanedo

  53. University Laval Infrared Thermography Databases for Deep Learning Multiple Types of Defect Detections Training

    Article • December 2021, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  54. Defect Enhancement and Image Noise Reduction Analysis Using Partial Least Square-Generative Adversarial Networks (PLS-GANs) in Thermographic Nondestructive Evaluation

    Article • Journal of Nondestructive Evaluation, November 2021, Springer Science + Business Media

    Dr. Clemente Ibarra-Castanedo

  55. Data Enhancement via Low-Rank Matrix Reconstruction in Pulsed Thermography for Carbon-Fibre-Reinforced Polymers

    Article • Sensors, October 2021, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  56. Drone-Based Non-Destructive Inspection of Industrial Sites: A Review and Case Studies

    Article • Drones, September 2021, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  57. Data Enhancement via Low-Rank Matrix Reconstruction in Pulsed Thermography for Carbon-fiber-Reinforced Polymers

    Article • August 2021, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  58. Unsupervised Identification of Targeted Spectra Applying Rank1-NMF and FCC Algorithms in Long-Wave Hyperspectral Infrared Imagery

    Article • Remote Sensing, May 2021, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  59. Independent Component Analysis Applied on Pulsed Thermographic Data for Carbon Fiber Reinforced Plastic Inspection: A Comparative Study

    Article • Applied Sciences, May 2021, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  60. Numerical Simulation and Experimental Study of Capacitive Imaging Technique as a Nondestructive Testing Method

    Article • Applied Sciences, April 2021, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  61. Multiscale Analysis of Solar Loading Thermographic Signals for Wall Structure Inspection

    Article • Sensors, April 2021, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  62. Diagnosis of composite materials in aircraft applications: towards a UAV active thermography inspection approach

    Article • April 2021, SPIE

    Dr. Clemente Ibarra-Castanedo, Dr Argyrios C Zolotas

  63. Robust Principal Component Thermography for Defect Detection in Composites

    Article • Sensors, April 2021, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  64. SPAER: Sparse Deep Convolutional Autoencoder Model to Extract Low Dimensional Imaging Biomarkers for Early Detection of Breast Cancer Using Dynamic Thermography

    Article • Applied Sciences, April 2021, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  65. Numerical Simulation and Experimental Study of Capacitive Imaging Technique as a Non-Destructive Testing Method

    Article • March 2021, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  66. Automatic Defects Segmentation and Identification by Deep Learning Algorithm with Pulsed Thermography: Synthetic and Experimental Data

    Article • Big Data and Cognitive Computing, February 2021, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  67. Evaluation and Selection of Video Stabilization Techniques for UAV-Based Active Infrared Thermography Application

    Article • Sensors, February 2021, MDPI AG

    Dr. Clemente Ibarra-Castanedo, Dr Argyrios C Zolotas

  68. Introduction of Deep Learning in Thermographic Monitoring of Cultural Heritage and Improvement by Automatic Thermogram Pre-Processing Algorithms

    Article • Sensors, January 2021, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  69. Measuring Heterogeneous Thermal Patterns in Infrared-Based Diagnostic Systems Using Sparse Low-Rank Matrix Approximation: Comparative Study

    Article • IEEE Transactions on Instrumentation and Measurement, January 2021, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Clemente Ibarra-Castanedo

  70. Enhanced Infrared Sparse Pattern Extraction and Usage for Impact Evaluation of Basalt-Carbon Hybrid Composites by Pulsed Thermography

    Article • Sensors, December 2020, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  71. Thermal imaging dataset from composite material academic samples inspected by pulsed thermography

    Article • Data in Brief, October 2020, Elsevier

    Dr. Clemente Ibarra-Castanedo

  72. Assessing the reliability of an automated system for mineral identification using LWIR Hyperspectral Infrared imagery

    Article • Minerals Engineering, August 2020, Elsevier

    Dr. Clemente Ibarra-Castanedo

  73. Thermal stresses applied on helicopter blades useful to retrieve defects by means of infrared thermography and speckle patterns

    Article • Thermal Science and Engineering Progress, August 2020, Elsevier

    Dr. Clemente Ibarra-Castanedo

  74. Comparison of Cooled and Uncooled IR Sensors by Means of Signal-to-Noise Ratio for NDT Diagnostics of Aerospace Grade Composites

    Article • Sensors, June 2020, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  75. Autonomous high resolution inspection of kiss-bonds skins of carbon nanotube reinforced nanocomposites using novel dynamic line-scan thermography approach

    Article • Composites Science and Technology, May 2020, Elsevier

    Dr. Clemente Ibarra-Castanedo

  76. Reflectivity detection and reduction of thermographic images using image stitching technique and its applications on remote inspection

    Article • April 2020, SPIE

    Shakeb Deane, Dr. Clemente Ibarra-Castanedo

  77. Defects detection in infrared thermography by deep learning algorithm

    Article • April 2020, SPIE

    Dr. Clemente Ibarra-Castanedo

  78. Inspecting historical vaulted ceilings by means of physical and chemical analyses: an integrated approach combining active infrared thermography and reflectance spectroscopy

    Article • Insight - Non-Destructive Testing and Condition Monitoring, March 2020, British Institute of Non-Destructive Testing (BINDT)

    Dr. Clemente Ibarra-Castanedo

  79. Using through-transmission mid-wave infrared vision and air-coupled ultrasound for artwork inspection: a case study on mock-ups of Portrait of the Painter's Mother

    Article • Insight - Non-Destructive Testing and Condition Monitoring, March 2020, British Institute of Non-Destructive Testing (BINDT)

    Dr. Clemente Ibarra-Castanedo

  80. Evaluating quality of marquetries by applying active IR thermography and advanced signal processing

    Article • Journal of Thermal Analysis and Calorimetry, January 2020, Springer Science + Business Media

    Dr. Clemente Ibarra-Castanedo

  81. Incremental Low Rank Noise Reduction for Robust Infrared Tracking of Body Temperature during Medical Imaging

    Article • Electronics, November 2019, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  82. LSTM-RNN-based defect classification in honeycomb structures using infrared thermography

    Article • Infrared Physics & Technology, November 2019, Elsevier

    Dr. Clemente Ibarra-Castanedo

  83. Evaluation of Impact of Hot-Mix Asphalt Density Differentials on Thermal Streak Phenomenon by Passive Infrared Thermography

    Article • Journal of Materials in Civil Engineering, October 2019, American Society of Civil Engineers (ASCE)

    Dr. Clemente Ibarra-Castanedo

  84. Automated defect classification in infrared thermography based on a neural network

    Article • NDT & E International, October 2019, Elsevier

    Dr. Clemente Ibarra-Castanedo

  85. Dynamic Line-Scan Thermography for the Inspection of Paper-Based Materials: A Case Study Focused on an Ancient Book Cover

    Article • September 2019, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  86. On the Use of Infrared Thermography and Acousto—Ultrasonics NDT Techniques for Ceramic-Coated Sandwich Structures

    Article • Energies, July 2019, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  87. Defect detection based on monogenic signal processing

    Article • May 2019, SPIE

    Dr. Clemente Ibarra-Castanedo

  88. Autonomous systems thermographic NDT of composite structures

    Article • May 2019, SPIE

    Dr. Clemente Ibarra-Castanedo

  89. Low-rank sparse principal component thermography (sparse-PCT): Comparative assessment on detection of subsurface defects

    Article • Infrared Physics & Technology, May 2019, Elsevier

    Dr. Clemente Ibarra-Castanedo

  90. Application of NDT thermographic imaging of aerospace structures

    Article • Infrared Physics & Technology, March 2019, Elsevier

    Dr. Clemente Ibarra-Castanedo

  91. Reliability assessment of pulsed thermography and ultrasonic testing for impact damage of CFRP panels

    Article • NDT & E International, March 2019, Elsevier

    Dr. Clemente Ibarra-Castanedo

  92. Improving the detection of thermal bridges in buildings via on-site infrared thermography: The potentialities of innovative mathematical tools

    Article • Energy and Buildings, January 2019, Elsevier

    Dr. Clemente Ibarra-Castanedo

  93. Mineral identification in LWIR hyperspectral imagery applying sparse-based clustering

    Article • Quantitative InfraRed Thermography Journal, December 2018, Taylor & Francis

    Dr. Clemente Ibarra-Castanedo

  94. Automated Dynamic Inspection Using Active Infrared Thermography

    Article • IEEE Transactions on Industrial Informatics, December 2018, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Clemente Ibarra-Castanedo

  95. Nondestructive evaluation of low-velocity impact-induced damage in basalt-carbon hybrid composite laminates using eddy current-pulsed thermography

    Article • Optical Engineering, October 2018, SPIE

    Dr. Clemente Ibarra-Castanedo

  96. A Comparative Study of Enhanced Infrared Image Processing for Foreign Object Detection in Lightweight Composite Honeycomb Structures

    Article • International Journal of Thermophysics, October 2018, Springer Science + Business Media

    Dr. Clemente Ibarra-Castanedo

  97. Thermography data fusion and nonnegative matrix factorization for the evaluation of cultural heritage objects and buildings

    Article • Journal of Thermal Analysis and Calorimetry, August 2018, Springer Science + Business Media

    Dr. Clemente Ibarra-Castanedo

  98. Continuum removal for ground-based LWIR hyperspectral infrared imagery applying non-negative matrix factorization

    Article • Applied Optics, July 2018, Optical Society of America (OSA)

    Dr. Clemente Ibarra-Castanedo

  99. Comparison Assessment of Low Rank Sparse-PCA Based- Clustering/Classification for Automatic Mineral Identification in Long Wave Infrared Hyperspectral Imagery

    Article • Infrared Physics & Technology, July 2018, Elsevier

    Dr. Clemente Ibarra-Castanedo

  100. A novel optical air-coupled ultrasound NDE sensing technique compared with infrared thermographic NDT on impacted composite materials

    Article • May 2018, SPIE

    Dr. Clemente Ibarra-Castanedo

  101. Eddy current pulsed thermography for ballistic impact evaluation in basalt-carbon hybrid composite panels

    Article • Applied Optics, April 2018, Optical Society of America (OSA)

    Dr. Clemente Ibarra-Castanedo

  102. Active thermography testing and data analysis for the state of conservation of panel paintings

    Article • International Journal of Thermal Sciences, April 2018, Elsevier

    Prof. Dario Ambrosini, Dr. Clemente Ibarra-Castanedo

  103. Optical excitation thermography for twill/plain weaves and stitched fabric dry carbon fibre preform inspection

    Article • Composites Part A Applied Science and Manufacturing, April 2018, Elsevier

    Dr. Clemente Ibarra-Castanedo

  104. Nondestructive evaluation using eddy current pulsed thermographic imaging of basalt-carbon hybrid fiber-reinforced composite laminates subjected to low-velocity impact loadings

    Article • March 2018, SPIE

    Dr. Clemente Ibarra-Castanedo

  105. More than Fifty Shades of Grey: Quantitative Characterization of Defects and Interpretation Using SNR and CNR

    Article • Journal of Nondestructive Evaluation, March 2018, Springer Science + Business Media

    Dr. Clemente Ibarra-Castanedo

  106. Comparison and evaluation of geometric calibration methods for infrared cameras to perform metric measurements on a plane

    Article • Applied Optics, February 2018, Optical Society of America (OSA)

    Dr. Clemente Ibarra-Castanedo

  107. Thermographic Non-Destructive Evaluation for Natural Fiber-Reinforced Composite Laminates

    Article • Applied Sciences, February 2018, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  108. Optical and Mechanical Excitation Thermography for Impact Response in Basalt-Carbon Hybrid Fiber-Reinforced Composite Laminates

    Article • IEEE Transactions on Industrial Informatics, February 2018, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Clemente Ibarra-Castanedo

  109. Machine Learning and Infrared Thermography for Fiber Orientation Assessment on Randomly-Oriented Strands Parts

    Article • Sensors, January 2018, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  110. Impact Modelling and A Posteriori Non-destructive Evaluation of Homogeneous Particleboards of Sugarcane Bagasse

    Article • Journal of Nondestructive Evaluation, January 2018, Springer Science + Business Media

    Dr. Clemente Ibarra-Castanedo

  111. Parameter Optimization of Robotize Line Scan Thermography for CFRP Composite Inspection

    Article • Journal of Nondestructive Evaluation, January 2018, Springer Science + Business Media

    Dr. Clemente Ibarra-Castanedo

  112. IR Reflectography and Active Thermography on Artworks: The Added Value of the 1.5–3 µm Band

    Article • Applied Sciences, January 2018, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  113. Application of Deep Learning in Infrared Non-Destructive Testing

    Article • January 2018, QIRT Council

    Dr. Clemente Ibarra-Castanedo

  114. Comparative study of Line Scan and Flying Line Active IR Thermography operated with a 6-axis robot

    Article • January 2018, QIRT Council

    Dr. Clemente Ibarra-Castanedo

  115. Optimised dynamic line scan thermographic detection of CFRP inserts using FE updating and POD analysis

    Article • NDT & E International, January 2018, Elsevier

    Dr. Clemente Ibarra-Castanedo

  116. Thermal Diffusivity Measurements With Flash Method at Different Depths In a Burned Composite Material

    Article • January 2018, QIRT Council

    Dr. Clemente Ibarra-Castanedo

  117. Enhanced Infrared Image Processing for Impacted Carbon/Glass Fiber-Reinforced Composite Evaluation

    Article • Sensors, December 2017, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  118. Highly accurate geometric calibration for infrared cameras using inexpensive calibration targets

    Article • Measurement, December 2017, Elsevier

    Dr. Clemente Ibarra-Castanedo

  119. Qualitative Assessments via Infrared Vision of Sub-surface Defects Present Beneath Decorative Surface Coatings

    Article • International Journal of Thermophysics, November 2017, Springer Science + Business Media

    Dr. Clemente Ibarra-Castanedo

  120. Nondestructive Evaluation of Carbon Fiber Bicycle Frames Using Infrared Thermography

    Article • Sensors, November 2017, MDPI AG

    Dr. Clemente Ibarra-Castanedo

  121. Artificial Neural Networks and Infrared Thermography for Fiber Orientation Assessment

    Article • October 2017, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Clemente Ibarra-Castanedo

  122. Comparative analysis on thermal non-destructive testing imagery applying Candid Covariance-Free Incremental Principal Component Thermography (CCIPCT)

    Article • Infrared Physics & Technology, September 2017, Elsevier

    Dr. Clemente Ibarra-Castanedo

  123. Evaluation of the state of conservation of mosaics: Simulations and thermographic signal processing

    Article • International Journal of Thermal Sciences, July 2017, Elsevier

    Dr. Clemente Ibarra-Castanedo

  124. Analysis of Damage in Hybrid Composites Subjected to Ballistic Impacts: An Integrated Non‐Destructive Approach

    Article • June 2017, Wiley

    Dr. Clemente Ibarra-Castanedo

  125. Modified algorithm for mineral identification in LWIR hyperspectral imagery

    Article • May 2017, SPIE

    Dr. Clemente Ibarra-Castanedo

  126. The role of the continuous wavelet transform in mineral identification using hyperspectral imaging in the long-wave infrared by using SVM classifier

    Article • May 2017, SPIE

    Dr. Clemente Ibarra-Castanedo

  127. Thermal NDT applying Candid Covariance-Free Incremental Principal Component Thermography (CCIPCT)

    Article • May 2017, SPIE

    Dr. Clemente Ibarra-Castanedo

  128. Solar loading thermography: Time-lapsed thermographic survey and advanced thermographic signal processing for the inspection of civil engineering and cultural heritage structures

    Article • Infrared Physics & Technology, May 2017, Elsevier

    Dr. Clemente Ibarra-Castanedo

  129. Infrared vision for artwork and cultural heritage NDE studies: principles and case studies

    Article • Insight - Non-Destructive Testing and Condition Monitoring, May 2017, British Institute of Non-Destructive Testing (BINDT)

    Dr. Clemente Ibarra-Castanedo

  130. Non-destructive Investigation of Paintings on Canvas by Continuous Wave Terahertz Imaging and Flash Thermography

    Article • Journal of Nondestructive Evaluation, April 2017, Springer Science + Business Media

    Dr. Clemente Ibarra-Castanedo

  131. Optimization of the Inspection of Large Composite Materials Using Robotized Line Scan Thermography

    Article • Journal of Nondestructive Evaluation, April 2017, Springer Science + Business Media

    Dr. Clemente Ibarra-Castanedo

  132. Robust quantitative depth estimation on CFRP samples using active thermography inspection and numerical simulation updating

    Article • NDT & E International, April 2017, Elsevier

    Dr. Clemente Ibarra-Castanedo

  133. Automatic IRNDT inspection applying sparse PCA-based clustering

    Article • April 2017, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Clemente Ibarra-Castanedo

  134. Implementation of advanced signal processing techniques on Line-Scan Thermography data

    Article • April 2017, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Clemente Ibarra-Castanedo

  135. The multi-dimensional ensemble empirical mode decomposition (MEEMD)

    Article • Journal of Thermal Analysis and Calorimetry, January 2017, Springer Science + Business Media

    Dr. Clemente Ibarra-Castanedo

  136. Three-dimensional thermography for non-destructive testing and evaluation

    Article • Quantitative InfraRed Thermography Journal, December 2016, Taylor & Francis

    Dr. Clemente Ibarra-Castanedo

  137. Comparative study of microlaser excitation thermography and microultrasonic excitation thermography on submillimeter porosity in carbon fiber reinforced polymer composites

    Article • Optical Engineering, September 2016, SPIE

    Hai Zhang, Dr. Clemente Ibarra-Castanedo

  138. Carbon fiber composite inspection and defect characterization using active infrared thermography: numerical simulations and experimental results

    Article • Applied Optics, September 2016, Optical Society of America (OSA)

    Hai Zhang, Dr. Clemente Ibarra-Castanedo

  139. Pulsed micro-laser line thermography on submillimeter porosity in carbon fiber reinforced polymer composites: experimental and numerical analyses for the capability of detection

    Article • Applied Optics, September 2016, Optical Society of America (OSA)

    Hai Zhang, Dr. Clemente Ibarra-Castanedo

  140. Fracture behavior of reinforced aluminum alloy matrix composites using thermal imaging tools

    Article • May 2016, SPIE

    Dr. Clemente Ibarra-Castanedo

  141. Emissivity retrieval from indoor hyperspectral imaging of mineral grains

    Article • May 2016, SPIE

    Dr. Clemente Ibarra-Castanedo

  142. http://dx.doi.org/10.1117/12.2223782

    Article • May 2016, SPIE

    Dr. Clemente Ibarra-Castanedo

  143. Infrared thermography for CFRP inspection: computational model and experimental results

    Article • May 2016, SPIE

    Dr. Clemente Ibarra-Castanedo, Hai Zhang, Jose Tarpani

  144. Diagnostics of wall paintings: A smart and reliable approach

    Article • Journal of Cultural Heritage, March 2016, Elsevier

    Dr. Clemente Ibarra-Castanedo

  145. Basalt fibre laminates non-destructively inspected after low-velocity impacts

    Article • FME Transaction, January 2016, Centre for Evaluation in Education and Science (CEON/CEES)

    Dr. Clemente Ibarra-Castanedo

  146. Robotic Eddy Current Thermography: Simulations and experiments

    Article • January 2016, QIRT Council

    Dr. Clemente Ibarra-Castanedo

  147. Fiber orientation assessment on randomly-oriented strand composites by means of infrared thermography

    Article • Composites Science and Technology, December 2015, Elsevier

    Dr. Clemente Ibarra-Castanedo, Hai Zhang

  148. Comparative study on submillimeter flaws in stitched T-joint carbon fiber reinforced polymer by infrared thermography, microcomputed tomography, ultrasonic c-scan and microscopic inspection

    Article • Optical Engineering, October 2015, SPIE

    Dr. Clemente Ibarra-Castanedo, Hai Zhang

  149. Thermographic Non-destructive Evaluation of Carbon Fiber-Reinforced Polymer Plates After Tensile Testing

    Article • Journal of Nondestructive Evaluation, September 2015, Springer Science + Business Media

    Dr. Clemente Ibarra-Castanedo, Hai Zhang

  150. How to Retrieve Information Inherent to Old Restorations Made on Frescoes of Particular Artistic Value Using Infrared Vision?

    Article • International Journal of Thermophysics, August 2015, Springer Science + Business Media

    Dr. Clemente Ibarra-Castanedo, Prof. Dario Ambrosini

  151. Role of the masonry in paintings during a seismic event analyzed by infrared vision

    Article • July 2015, SPIE

    Dr. Clemente Ibarra-Castanedo, Prof. Dario Ambrosini

  152. Three-dimensional non-destructive testing (NDT) in the infrared spectrum

    Article • May 2015, SPIE

    Dr. Clemente Ibarra-Castanedo

  153. Integration of infrared and optical imaging techniques for the nondestructive inspection of aeronautic parts

    Article • May 2015, SPIE

    Dr. Clemente Ibarra-Castanedo

  154. Review of pulse phase thermography

    Article • May 2015, SPIE

    Dr. Clemente Ibarra-Castanedo

  155. Santa Maria di Collemaggio Church (L’Aquila, Italy): Historical Reconstruction by Non-Destructive Testing Techniques

    Article • International Journal of Architectural Heritage, January 2015, Taylor & Francis

    Dr. Clemente Ibarra-Castanedo, Prof. Dario Ambrosini

  156. Infrared Vision: Visual Inspection Beyond the Visible Spectrum

    Article • January 2015, Springer Science + Business Media

    Dr. Clemente Ibarra-Castanedo

  157. COMPARISON OF ACTIVE THERMOGRAPHY TECHNIQUES FOR THE INSPECTION AND DEFECT CHARACTERISATION OF CARBON FIBER COMPOSITES

    Article • January 2015, SWGE Sistemas

    Dr. Clemente Ibarra-Castanedo

  158. Subsurface imaging for panel paintings inspection: A comparative study of the ultraviolet, the visible, the infrared and the terahertz spectra

    Article • Opto-Electronics Review, January 2015, Elsevier

    Dr. Clemente Ibarra-Castanedo, Dr. Stefano Sfarra

  159. Thermal–numerical model and computational simulation of pulsed thermography inspection of carbon fiber-reinforced composites

    Article • International Journal of Thermal Sciences, December 2014, Elsevier

    Dr. Clemente Ibarra-Castanedo

  160. Optimization of pulsed thermography inspection by partial least-squares regression

    Article • NDT & E International, September 2014, Elsevier

    Dr. Clemente Ibarra-Castanedo

  161. Pulsed thermographic inspection of CFRP structures: experimental results and image analysis tools

    Article • March 2014, SPIE

    Dr. Clemente Ibarra-Castanedo

  162. Non-Destructive Testing Techniques to Help the Restoration of Frescoes

    Article • Arabian Journal for Science and Engineering, March 2014, Springer Science + Business Media

    Dr. Clemente Ibarra-Castanedo, Prof. Dario Ambrosini

  163. Monitoring of jute/hemp fiber hybrid laminates by nondestructive testing techniques

    Article • Science and Engineering of Composite Materials, January 2014, De Gruyter

    Dr. Clemente Ibarra-Castanedo, Dr. Stefano Sfarra

  164. Discovering the Defects in Paintings Using Non-destructive Testing (NDT) Techniques and Passing Through Measurements of Deformation

    Article • Journal of Nondestructive Evaluation, January 2014, Springer Science + Business Media

    Dr. Clemente Ibarra-Castanedo, Prof. Dario Ambrosini

  165. Inverse model for defect characterisation of externally glued CFRP on reinforced concrete structures: comparative study of square pulsed and pulsed thermography

    Article • Quantitative InfraRed Thermography Journal, January 2014, Taylor & Francis

    Dr. Clemente Ibarra-Castanedo

  166. Enhanced image processing for infrared non-destructive testing

    Article • Opto-Electronics Review, January 2014, Elsevier

    Dr. Clemente Ibarra-Castanedo

  167. Compression After Impact and Fatigue of Reconsolidated Fiber-reinforced Thermoplastic Matrix Solid Composite Laminate

    Article • Procedia Materials Science, January 2014, Elsevier

    Dr. Clemente Ibarra-Castanedo, Jose Tarpani

  168. Nondestructive testing with thermography

    Article • European Journal of Physics, October 2013, Institute of Physics Publishing

    Dr. Clemente Ibarra-Castanedo, Jose Tarpani

  169. Holographic Interferometry (HI), Infrared Vision and X-Ray Fluorescence (XRF) spectroscopy for the assessment of painted wooden statues: a new integrated approach

    Article • Applied Physics A, September 2013, Springer Science + Business Media

    Dr. Clemente Ibarra-Castanedo, Prof. Dario Ambrosini

  170. Quantitative evaluation of optical lock-in and pulsed thermography for aluminum foam material

    Article • Infrared Physics & Technology, September 2013, Elsevier

    Dr. Clemente Ibarra-Castanedo

  171. How to reveal subsurface defects in Kevlar® composite materials after an impact loading using infrared vision and optical NDT techniques?

    Article • Engineering Fracture Mechanics, August 2013, Elsevier

    Dr. Clemente Ibarra-Castanedo

  172. Defects detection and non-destructive testing (NDT) techniques in paintings: a unified approach through measurements of deformation

    Article • May 2013, SPIE

    Dr. Clemente Ibarra-Castanedo, Prof. Dario Ambrosini

  173. Nondestructive testing of externally reinforced structures for seismic retrofitting using flax fiber reinforced polymer (FFRP) composites

    Article • May 2013, SPIE

    Dr. Clemente Ibarra-Castanedo

  174. Analysis of signal processing techniques in pulsed thermography

    Article • May 2013, SPIE

    Dr. Clemente Ibarra-Castanedo

  175. Infrared thermography inspection of glass reinforced plastic (GRP) wind turbine blades and the concept of an automated scanning device

    Article • May 2013, SPIE

    Dr. Clemente Ibarra-Castanedo

  176. Eco-Friendly Laminates: From the Indentation to Non-Destructive Evaluation by Optical and Infrared Monitoring Techniques

    Article • Strain, February 2013, Wiley

    Dr. Clemente Ibarra-Castanedo, Prof. Dario Ambrosini

  177. Falling weight impacted glass and basalt fibre woven composites inspected using non-destructive techniques

    Article • Composites Part B Engineering, February 2013, Elsevier

    Dr. Clemente Ibarra-Castanedo

  178. Infrared Thermography

    Article • January 2013, Springer Science + Business Media

    Dr. Clemente Ibarra-Castanedo

  179. From the experimental simulation to integrated non-destructive analysis by means of optical and infrared techniques: results compared

    Article • Measurement Science and Technology, October 2012, Institute of Physics Publishing

    Dr. Clemente Ibarra-Castanedo

  180. ThermoPoD: A reliability study on active infrared thermography for the inspection of composite materials

    Article • Journal of Mechanical Science and Technology, July 2012, Springer Science + Business Media

    Dr. Clemente Ibarra-Castanedo

  181. Water ingress detection in honeycomb sandwich panels by passive infrared thermography using a high-resolution thermal imaging camera

    Article • May 2012, SPIE

    Dr. Clemente Ibarra-Castanedo

  182. NDT inspection of plastered mosaics by means of transient thermography and holographic interferometry

    Article • NDT & E International, April 2012, Elsevier

    Dr. Clemente Ibarra-Castanedo, Prof. Dario Ambrosini

  183. Nondestructive Assessment of Glass Fibre Composites by Mid-Wave and Near Infrared Vision

    Article • MATERIALS TRANSACTIONS, January 2012, Japan Institute of Metals

    Dr. Clemente Ibarra-Castanedo

  184. Evaluation of defects in panel paintings using infrared, optical and ultrasonic techniques

    Article • Insight - Non-Destructive Testing and Condition Monitoring, January 2012, British Institute of Non-Destructive Testing (BINDT)

    Dr. Clemente Ibarra-Castanedo

  185. The use of optical and infrared techniques for the restoration of the frescoes damaged by earthquake: a case study–the fresco of Giacomo Farelli in the Church of Santa Maria della Croce di Roio (L’Aquila, Italy)

    Article • September 2011, WITPRESS LTD.

    Dr. Clemente Ibarra-Castanedo, Prof. Dario Ambrosini

  186. Importance of integrated results of different non-destructive techniques in order to evaluate defects in panel paintings: the contribution of infrared, optical and ultrasonic techniques

    Article • June 2011, SPIE

    Dr. Clemente Ibarra-Castanedo

  187. Infrared thermography as a nondestructive tool for materials characterisation and assessment

    Article • May 2011, SPIE

    Dr. Clemente Ibarra-Castanedo

  188. Automated transient thermography for the inspection of CFRP structures: experimental results and developed procedures

    Article • May 2011, SPIE

    Dr. Clemente Ibarra-Castanedo

  189. Integrated approach between pulsed thermography, near-infrared reflectography and sandwich holography for wooden panel paintings advanced monitoring

    Article • Russian Journal of Nondestructive Testing, April 2011, Pleiades Publishing Ltd

    Dr. Clemente Ibarra-Castanedo, Prof. Dario Ambrosini

  190. Delamination detection and impact damage assessment of GLARE by active thermography

    Article • International Journal of Materials and Product Technology, January 2011, Inderscience Publishers

    Dr. Clemente Ibarra-Castanedo

  191. Infrared thermography processing based on higher-order statistics

    Article • NDT & E International, November 2010, Elsevier

    Dr. Clemente Ibarra-Castanedo

  192. Active infrared thermography applied to defect detection and characterization on asphalt pavement samples: comparison between experiments and numerical simulations

    Article • Journal of Modern Optics, October 2010, Taylor & Francis

    Dr. Clemente Ibarra-Castanedo

  193. Quantitative Infrared Thermography (IRT) and Holographic Interferometry (HI): Nondestructive Testing (NDT) for Defects Detection in the Silicate Ceramics Industry

    Article • Advances in Science and Technology, October 2010, Trans Tech Publications

    Dr. Clemente Ibarra-Castanedo, Prof. Dario Ambrosini

  194. Diagnostics of panel paintings using holographic interferometry and pulsed thermography

    Article • Quantitative InfraRed Thermography Journal, June 2010, Taylor & Francis

    Dr. Clemente Ibarra-Castanedo, Prof. Dario Ambrosini

  195. Nondestructive testing of plastered mosaics with the use of active thermography approaches

    Article • April 2010, SPIE

    Dr. Clemente Ibarra-Castanedo

  196. Active thermography signal processing techniques for defect detection and characterization on composite materials

    Article • April 2010, SPIE

    Dr. Clemente Ibarra-Castanedo

  197. Comparative study for the nondestructive testing of advanced ceramic materials by infrared thermography and holographic interferometry

    Article • April 2010, SPIE

    Dr. Clemente Ibarra-Castanedo, Prof. Dario Ambrosini

  198. A comparative investigation for the nondestructive testing of honeycomb structures by holographic interferometry and infrared thermography

    Article • Journal of Physics Conference Series, March 2010, Institute of Physics Publishing

    Dr. Clemente Ibarra-Castanedo, Prof. Dario Ambrosini

  199. DEVELOPMENT OF A FIELD CONCENTRATOR COIL BY FINITE ELEMENT MODELING FOR POWER EFFICIENCY OPTIMIZATION IN EDDY CURRENT THERMOGRAPHY INSPECTION

    Article • January 2010, American Institute of Physics

    Dr. Clemente Ibarra-Castanedo

  200. Defect characterization in infrared non-destructive testing with learning machines

    Article • NDT & E International, October 2009, Elsevier

    Dr. Clemente Ibarra-Castanedo

  201. Heat-stimulus correction for pulsed-infrared thermography

    Article • May 2009, SPIE

    Dr. Clemente Ibarra-Castanedo

  202. Enhanced contrast detection of subsurface defects by pulsed infrared thermography based on the fourth order statistic moment, kurtosis

    Article • May 2009, SPIE

    Dr. Clemente Ibarra-Castanedo

  203. Comparative Study of Active Thermography Techniques for the Nondestructive Evaluation of Honeycomb Structures

    Article • Research in Nondestructive Evaluation, January 2009, Taylor & Francis

    Dr. Clemente Ibarra-Castanedo

  204. Subsurface defect characterization in artworks by quantitative pulsed phase thermography and holographic interferometry

    Article • Quantitative InfraRed Thermography Journal, December 2008, Taylor & Francis

    Dr. Clemente Ibarra-Castanedo, Prof. Dario Ambrosini

  205. A straightforward graphical user interface for basic and advanced signal processing of thermographic infrared sequences

    Article • March 2008, SPIE

    Dr. Clemente Ibarra-Castanedo

  206. Thermographic signal processing through correlation operators in pulsed thermography

    Article • March 2008, SPIE

    Dr. Clemente Ibarra-Castanedo

  207. A study of active thermography approaches for the non-destructive testing and evaluation of aerospace structures

    Article • March 2008, SPIE

    Dr. Clemente Ibarra-Castanedo

  208. Localization of wood floor structure by infrared thermography

    Article • March 2008, SPIE

    Dr. Clemente Ibarra-Castanedo

  209. Definition of a new thermal contrast and pulse correction for defect quantification in pulsed thermography

    Article • Infrared Physics & Technology, January 2008, Elsevier

    Dr. Clemente Ibarra-Castanedo

  210. A combined integral transform asymptotic expansion method for the characterization of interface flaws through pulsed infrared thermography

    Article • Quantitative InfraRed Thermography Journal, June 2007, Taylor & Francis

    Dr. Clemente Ibarra-Castanedo

  211. Qualitative and quantitative assessment of aerospace structures by pulsed thermography

    Article • Nondestructive Testing And Evaluation, June 2007, Taylor & Francis

    Dr. Clemente Ibarra-Castanedo

  212. ACTIVE INFRARED THERMOGRAPHY TECHNIQUES FOR THE NONDESTRUCTIVE TESTING OF MATERIALS

    Article • May 2007, World Scientific Pub Co Pte Lt

    Dr. Clemente Ibarra-Castanedo

  213. Images processing and flow measurement applied to the thermographic analysis of heat-losses in boilers' isolation

    Article • April 2007, SPIE

    Dr. Clemente Ibarra-Castanedo

  214. Defect quantification with reference-free thermal contrast and artificial neural networks

    Article • April 2007, SPIE

    Dr. Clemente Ibarra-Castanedo

  215. Inspection of aerospace materials by pulsed thermography, lock-in thermography, and vibrothermography: a comparative study

    Article • April 2007, SPIE

    Dr. Clemente Ibarra-Castanedo

  216. Thermographic studies of plastered mosaics

    Article • Infrared Physics & Technology, January 2007, Elsevier

    Dr. Clemente Ibarra-Castanedo

  217. Phase contrast using a differentiated absolute contrast method

    Article • Quantitative InfraRed Thermography Journal, December 2006, Taylor & Francis

    Dr. Clemente Ibarra-Castanedo

  218. New algorithm based on the Hough transform for the analysis of pulsed thermographic sequences

    Article • NDT & E International, December 2006, Elsevier

    Dr. Clemente Ibarra-Castanedo

  219. Quantitative inspection of non-planar composite specimens by pulsed phase thermography

    Article • Quantitative InfraRed Thermography Journal, June 2006, Taylor & Francis

    Dr. Clemente Ibarra-Castanedo

  220. Analysis of pulsed thermographic sequences based on radon transform

    Article • April 2006, SPIE

    Dr. Clemente Ibarra-Castanedo

  221. Quality control on radiant heaters manufacture

    Article • April 2006, SPIE

    Dr. Clemente Ibarra-Castanedo

  222. Discrete signal transforms as a tool for processing and analyzing pulsed thermographic data

    Article • April 2006, SPIE

    Dr. Clemente Ibarra-Castanedo

  223. Differentiated absolute phase contrast algorithm for the analysis of pulsed thermographic sequences

    Article • Infrared Physics & Technology, April 2006, Elsevier

    Dr. Clemente Ibarra-Castanedo

  224. Modified Differential Absolute Contrast using Thermal Quadrupoles for the Nondestructive Testing of Finite Thickness Specimens by Infrared Thermography

    Article • January 2006, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Clemente Ibarra-Castanedo

  225. Interactive Methodology for Optimized Defect Characterization by Quantitative Pulsed Phase Thermography

    Article • Research in Nondestructive Evaluation, October 2005, Taylor & Francis

    Dr. Clemente Ibarra-Castanedo

  226. Pulsed phase thermography inversion procedure using normalized parameters to account for defect size variations

    Article • March 2005, SPIE

    Dr. Clemente Ibarra-Castanedo

  227. Quantitative pulsed phase thermography applied to steel plates

    Article • March 2005, SPIE

    Dr. Clemente Ibarra-Castanedo

  228. Infrared image processing and data analysis

    Article • Infrared Physics & Technology, December 2004, Elsevier

    Dr. Clemente Ibarra-Castanedo

  229. A thermographic comparison study for the assessment of composite patches

    Article • Infrared Physics & Technology, July 2004, Elsevier

    Dr. Clemente Ibarra-Castanedo

  230. Pulsed phase thermography reviewed

    Article • Quantitative InfraRed Thermography Journal, June 2004, Taylor & Francis

    Dr. Clemente Ibarra-Castanedo

  231. Defect depth retrieval from pulsed phase thermographic data on Plexiglas and aluminum samples

    Article • April 2004, SPIE

    Dr. Clemente Ibarra-Castanedo

  232. Thermal transient thermographic NDT and E of composites

    Article • April 2004, SPIE

    Dr. Clemente Ibarra-Castanedo

  233. Advanced surveillance systems: combining video and thermal imagery for pedestrian detection

    Article • April 2004, SPIE

    Dr. Clemente Ibarra-Castanedo

  234. Aircraft composites assessment by means of transient thermal NDT

    Article • Progress in Aerospace Sciences, April 2004, Elsevier

    Dr. Clemente Ibarra-Castanedo

  235. Thermographic nondestructive evaluation: overview of recent progress

    Article • April 2003, SPIE

    Dr. Clemente Ibarra-Castanedo

  236. Digital treatment of thermal data by quantitative pulsed phase thermography for the non-destructive evaluation of materials

    Article • Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Clemente Ibarra-Castanedo