All Stories

  1. A Living Lab of Stone: 35 Years of Science and Preservation at Santa Maria della Croce (Italy)
  2. On the use of 3D printing to enhance the thermal performance of building envelope – A review
  3. Artwork diagnostics tools in your pocket
  4. 3D printing and nature-inspired design for energy efficiency in buildings
  5. A Proposal for A Human-in-the-Loop Daylight Control System—Preliminary Experimental Results
  6. A pilot project for energy retrofit of educational buildings - The engineering campus of the University of L’Aquila
  7. Experimental analysis of insulating materials using Guarded Hot Box - Preliminary results
  8. Monitoring of heritage buildings and dynamic simulation models
  9. BIM to BEM for Building Energy Analysis: A Review of Interoperability Strategies
  10. Simple smartphone-based artworks diagnostics by Moiré method and a diffractive optical element
  11. Thermal optimization of 3D-printed block – Hot Box and heat flow meter experimental analysis
  12. Hidden Grid Background Oriented Schlieren in studying convective flows
  13. On the Use of Waste Materials for Thermal Improvement of 3D-Printed Block—An Experimental Comparison
  14. Quantitative flow visualization by hidden grid background oriented schlieren
  15. The 3D Printing Potential for Heat Flow Optimization: Influence of Block Geometries on Heat Transfer Processes
  16. Comparative Examples of the Evolution of Thermal Cameras in Artwork Diagnostics: An Experimental Perspective
  17. How Do Temperature Differences and Stable Thermal Conditions Affect the Heat Flux Meter (HFM) Measurements of Walls? Laboratory Experimental Analysis
  18. On the influence of environmental boundary conditions on surface thermal resistance of walls: Experimental evaluation through a Guarded Hot Box
  19. Comparative examples of the evolution of thermal cameras in artwork diagnostics: an experimental perspective
  20. Focus-stacking system for 3D acquisition of sculptures and archaeological manufacts
  21. Dual mode imaging in mid infrared with thermal signal reconstruction for innovative diagnostics of the “Monocromo” by Leonardo da Vinci
  22. Building energy performance analysis at urban scale: A supporting tool for energy strategies and urban building energy rating identification
  23. Thermal Characterization of Different Insulating Materials via Experimental Analysis in a Guarded Hot Box
  24. Thermal imaging in the 3-5 micron range for precise localization of defects: application on frescoes at the Sforza Castle
  25. An optical method to simply measure in-plane and out-of-plane motion
  26. A Multidisciplinary Approach to Retrofitting Historic Buildings: The Case of the Former San Salvatore Hospital, L’Aquila
  27. Energy optimization analysis of archetype public buildings – Results from SHERPA European Project
  28. Influence of environmental boundary conditions on convective heat transfer coefficients of wall internal surface
  29. Learning lighting models for optimal control of lighting system via experimental and numerical approach
  30. Sensitivity of heating performance of an energy self-sufficient building to climate zone, climate change and HVAC system solutions
  31. A simple and cheap system to perform 3D thermography from drones
  32. Influence of the convective coefficient on the determination of thermal transmittance through outdoor infrared thermography
  33. Fast and robust method for flow analysis using GPU assisted diffractive optical element based background oriented schlieren (BOS)
  34. On Field Infrared Thermography Sensing for PV System Efficiency Assessment: Results and Comparison with Electrical Models
  35. A First Approach to Universal Daylight and Occupancy Control System for Any Lamps: Simulated Case in an Academic Classroom
  36. Spice Model of Photovoltaic Panel for Electronic System Design
  37. Special Issue on ‘Novel Ideas for Infrared Thermography and Its Application to Integrated Approaches’
  38. Effects of energy efficiency measures on building performance: an analysis in seven European cities
  39. How smartphones could help saving artworks
  40. The Potential of Optical Profilometry in the Study of Cultural Stone Weathering
  41. Sensor monitoring system for PV plant with active load
  42. Laboratory experiments for thermal analysis of buildings components
  43. On the use of phase change materials applied on cork-coconut-cork panels
  44. Influence of insulation defects on the thermal performance of walls. An experimental and numerical investigation
  45. Quantification of heat energy losses through the building envelope: A state-of-the-art analysis with critical and comprehensive review on infrared thermography
  46. Influence of insulation defects on the thermal performance of walls. An experimental and numerical investigation
  47. Multi-scale approach for analyzing convective heat transfer flow in background-oriented Schlieren technique
  48. Data-driven model predictive control using random forests for building energy optimization and climate control
  49. Room and window geometry influence for daylight harvesting maximization – Effects on energy savings in an academic classroom
  50. Combined experimental and computational approach for defect detection in precious walls built in indoor environments
  51. Effect of noise on measurements of diffusivity in transparent liquid mixtures by digital speckle photography
  52. A versatile system for in-situ speckle and thermography-based diagnostics of artifacts
  53. Is a self-sufficient building energy efficient? Lesson learned from a case study in Mediterranean climate
  54. Multipurpose, dual-mode imaging in the 3–5 µm range (MWIR) for artwork diagnostics: A systematic approach
  55. Here, there and everywhere: The art and science of optics at work
  56. Active thermography testing and data analysis for the state of conservation of panel paintings
  57. The thermophysical behaviour of cork supports doped with an innovative thermal insulation and protective coating: A numerical analysis based on in situ experimental data
  58. A proposal of a new material for greenhouses on the basis of numerical, optical, thermal and mechanical approaches
  59. Energetic performance analysis of a commercial water-based photovoltaic thermal system (PV/T) under summer conditions
  60. A first approach to universal daylight and occupancy control system for any lamps: Simulated case in an academic classroom
  61. The energy efficiency challenge for a historical building undergone to seismic and energy refurbishment
  62. The hybrid thermography approach applied to architectural structures
  63. IR thermography as a preliminary tool in acoustical inspection of ancient historical structures
  64. Multi-year consumption analysis and innovative energy perspectives: The case study of Leonardo da Vinci International Airport of Rome
  65. Modeling and Optimization of the Thermal Performance of a Wood-Cement Block in a Low-Energy House Construction
  66. Infrared exploration of the architectural heritage: from passive infrared thermography to hybrid infrared thermography (HIRT) approach
  67. U-value assessment by infrared thermography: A comparison of different calculation methods in a Guarded Hot Box
  68. A comparison between thermographic and flow-meter methods for the evaluation of thermal transmittance of different wall constructions
  69. 33rd UIT (Italian Union of Thermo-fluid dynamics) Heat Transfer Conference
  70. Validation of quantitative IR thermography for estimating the U-value by a hot box apparatus
  71. How to Retrieve Information Inherent to Old Restorations Made on Frescoes of Particular Artistic Value Using Infrared Vision?
  72. Ceramics and defects
  73. Role of the masonry in paintings during a seismic event analyzed by infrared vision
  74. Santa Maria di Collemaggio Church (L’Aquila, Italy): Historical Reconstruction by Non-Destructive Testing Techniques
  75. Quantitative thermography for the estimation of the U-value: state of the art and a case study
  76. Evaluating Mitigation Effects of Urban Heat Islands in a Historical Small Center with the ENVI-Met® Climate Model
  77. Diffusion Measurements Using DOE Schardin’s Schlieren #2 Technique
  78. Non-Destructive Testing Techniques to Help the Restoration of Frescoes
  79. A qualitative method for combining thermal imprints to emerging weak points of ancient wall structures by passive infrared thermography – A case study
  80. Discovering the Defects in Paintings Using Non-destructive Testing (NDT) Techniques and Passing Through Measurements of Deformation
  81. Holographic Interferometry (HI), Infrared Vision and X-Ray Fluorescence (XRF) spectroscopy for the assessment of painted wooden statues: a new integrated approach
  82. Defects detection and non-destructive testing (NDT) techniques in paintings: a unified approach through measurements of deformation
  83. Thermal Quasi-Reflectography (TQR): current research and potential applications
  84. Preventive thermographic diagnosis of historical buildings for consolidation
  85. Eco-Friendly Laminates: From the Indentation to Non-Destructive Evaluation by Optical and Infrared Monitoring Techniques
  86. Mid-infrared reflectography for the analysis of pictorial surface layers in artworks
  87. Role of data processing in measuring temperature gradients with DOE Schardin's schlieren #2
  88. Thermal quasi-reflectography: a new imaging tool in art conservation
  89. NDT inspection of plastered mosaics by means of transient thermography and holographic interferometry
  90. Flow visualization and beyond
  91. The use of optical and infrared techniques for the restoration of the frescoes damaged by earthquake: a case study–the fresco of Giacomo Farelli in the Church of Santa Maria della Croce di Roio (L’Aquila, Italy)
  92. Wide-band IR imaging in the NIR-MIR-FIR regions for in situ analysis of frescoes
  93. Integrated approach between pulsed thermography, near-infrared reflectography and sandwich holography for wooden panel paintings advanced monitoring
  94. Speckle-Based Deflection Techniques in Diffusivity Measurements
  95. Quantitative Infrared Thermography (IRT) and Holographic Interferometry (HI): Nondestructive Testing (NDT) for Defects Detection in the Silicate Ceramics Industry
  96. Diagnostics of panel paintings using holographic interferometry and pulsed thermography
  97. White-light speckle photography technique applied for free convection heat transfer problems
  98. Comparative study for the nondestructive testing of advanced ceramic materials by infrared thermography and holographic interferometry
  99. Integrated reflectography and thermography for wooden paintings diagnostics
  100. A comparative investigation for the nondestructive testing of honeycomb structures by holographic interferometry and infrared thermography
  101. Sandwich holography for studying convective fields: performance analysis
  102. Imaging data integration for painting diagnostics
  103. Subsurface defect characterization in artworks by quantitative pulsed phase thermography and holographic interferometry
  104. Diffusion measurements by optical methods: Recent advances and applications
  105. Overview of diffusion measurements by optical techniques
  106. Heat transfer measurement by a diffractive optical element fringe projection
  107. NDT methods in artwork corrosion monitoring
  108. Optical methods in heat transfer and fluid flow
  109. Unusual Optical Techniques in Diffusivity Measurements
  110. Comparative measurements of natural convection heat transfer in channels by holographic interferometry and schlieren
  111. Destructive interference from three partially coherent point sources
  112. Holographic and speckle methods for the analysis of panel paintings. Developments since the early 1970s
  113. Liquid diffusion coefficients by digital moire´
  114. Low-Cost Optoelectronic System for Three-Dimensional Artwork Texture Measurement
  115. INVESTIGATION OF NATURAL CONVECTION IN VERTICAL CHANNELS BY SCHLIEREN AND HOLOGRAPHIC INTERFEROMETRY
  116. Variable resolution profilometer for artwork surface topography
  117. Diffractive optical element based sensor to measure small diffusion coefficients
  118. An NDT electro-optic system for mosaics investigations
  119. Study of free-convective onset on a horizontal wire using speckle pattern interferometry
  120. Digital moir  by a diffractive optical element for deformation analysis of ancient paintings
  121. Vibration analysis of layered structures by digital local correlation of laser speckle
  122. Displacement measurement using the Talbot effect with a Ronchi grating
  123. Diffractive optical element based sensor for roughness measurement
  124. ESPI for mosaics diagnostics
  125. Vibration analysis of layered structures by optoelectronics methods
  126. Speckle decorrelation study of liquid diffusion
  127. White-light digital speckle photography in free convection
  128. Comparative study on the efficiency of some optical methods for artwork diagnostics
  129. Sandwich holography for simultaneous temperature visualization and heat-transfer coefficient measurement
  130. Diffractive optical element-based profilometer for surface inspection
  131. The propagator for a particle in a well
  132. Surface contouring by diffractive optical element-based fringe projection
  133. Fibre optic projected fringes for monitoring marble surface status
  134. Three-dimensional optical profilometry for artwork inspection
  135. Contouring of artwork surface by fringe projection and FFT analysis
  136. Artwork Profilometry Using a Diffractive Element for Fringe Projection
  137. Sandwich holography for determining the convective heat transfer coefficient
  138. Talbot effect application: measurement of distance with a Fourier-transform method
  139. High-precision digital automated measurement of degree of coherence in the Thompson and Wolf experiment
  140. Measurement of vibration amplitude by an optical fiber-based moiré interferometer
  141. Image decorrelation for in situ diagnostics of wooden artifacts
  142. Electro-optic correlation forin situdiagnostics in mural frescoes
  143. An elementary approach to spinors
  144. Bouncing light beams and the Hamiltonian analogy
  145. Vibration monitoring by fiber optic fringe projection and Fourier transform analysis
  146. Roughness measurement by electronic speckle correlation and mechanical profilometry
  147. Successful pinhole photography
  148. A Simple Method of Determining Diffusion Coefficient by Digital Laser Speckle Correlation
  149. Propagation of axially symmetric flattened Gaussian beams
  150. Evaluation of diffusion in liquids by digital speckle pattern interferometry: computer simulation and experiments
  151. Studying heat transfer with TV-holography
  152. Twisted Gaussian Schell-model Beams: A Superposition Model
  153. Field correlations within a homogeneous and isotropic source
  154. Fourier transform evaluation of digital interferograms for diffusivity measurement
  155. A Novel Method For Daylight Harvesting Optimization Based On Lighting Simulation And Data-Driven Optimal Control