All Stories

  1. Surface decoration of commercial micro-sized TiO2 by means of high energy ultrasound: A way to enhance its photocatalytic activity under visible light
  2. Temperature-programmed C18O2 SSITKA for powders of fast oxide-ion conductors: Estimation of oxygen self-diffusion coefficients
  3. Sonochemistry in the service of SOFC research
  4. Οxygen tracer diffusion in single crystalline yttrium silicate
  5. Interaction mechanism of hydrogen storage materials with layer-by-layer applied protective polyelectrolyte coatings
  6. Oxygen self-diffusion and conductivity measurements in apatite type electrolyte materials for SOFCs
  7. The influence of protecting polyelectrolyte layers on the temperature behavior of NaBD4
  8. A study of barium ultra-thin films on the SrTiO3(100) surface by soft X-ray photoelectron spectroscopy
  9. Fundamental studies of sonoelectrochemical nanomaterials preparation
  10. The interaction of CO2 and CO with Fe-doped SrTiO3(100) surfaces
  11. Apatite type lanthanum silicate and composite anode half cells
  12. Study of the oxygen incorporation and diffusion in Sr(Ti0.65Fe0.35)O3 ceramics
  13. Water as a source for oxygen incorporation into acceptor doped SrTiO3 single crystals
  14. Studies of oxygen transport mechanism in electrolytes based on doped lanthanum silicate with apatite structure using techniques of oxygen isotopic heteroexchange and impedance spectroscopy
  15. Preparation and conductivity of ternary scandia-stabilised zirconia
  16. The interaction of H2O with Fe-doped SrTiO3(100) surfaces
  17. Development of a precursor sol for the electric field assisted sol–gel deposition of yttrium silicate
  18. Impedance study of the electrophoretic deposition of yttrium silicate from a polymeric precursor sol
  19. Mechanochemical Synthesis of Fe‐Doped Apatite‐Type Lanthanum Silicates
  20. Electrochemical Quartz Crystal Microbalance Technique in Sonoelectrochemistry
  21. Development of mullite and mullite/Al2O3 precursor sols for electrophoretic deposition of oxidation protection coatings
  22. Catalytic properties and coking stability of new anode materials for internal methane reforming in the intermediate temperature solid oxide fuel cells
  23. Oxygen diffusion in SrZrO3
  24. Fe- and Al-doped apatite-type lanthanum silicates: Structure and property characterization
  25. Application of Ionic Liquids in the Electrophoretic Deposition of Oxide Layers
  26. Deposition of Sonochemically Derived Nano Particles
  27. Electrophoretic Deposition as Preparation Method for Intermediate Temperature SOFC Half Cells
  28. Galvanostatic Electrophoretic Deposition of Yttriumsilicate on C/C-Si-SiC Composites
  29. Preparation and Electrophoretic Deposition of an Yttrium Silicate Precursor Sol
  30. Preparation of Thin Proton Conducting Membranes by Means of EPD
  31. Structure and Transport Properties of Doped Apatite-type Lanthanum Silicates Prepared via Mechanochemical Route
  32. Oxygen incorporation into strontium titanate single crystals from CO2 dissociation
  33. Sonoelectrochemical Deposition of Functional Composite Layers
  34. Electrochemical Characterization of a La
  35. An EQCM study of ultrasonically assisted electrodeposition of Co/CeO2and Ni/CeO2composites for fuel cell applications
  36. Creep in scandia stabilized zirconia
  37. Application of the electrochemical quartz crystal microbalance technique to copper sonoelectrochemistry
  38. Al‐Doped Apatite‐Type Nanocrystalline Lanthanum Silicates Prepared by Mechanochemical Synthesis: Phase, Structural and Microstructural Study
  39. Doped Apatite Type Lanthanum Silicates: Structure and Property Characterization
  40. Anode Composites Based on NiO and Apatite-Type Lanthanum Silicate for Intermediate Temperature Solid Oxide Fuel Cells
  41. Low-Temperature Synthesis Methods of Doped Apatite-Type Lanthanum Silicates
  42. A Simple Model for Prediction of Polarization Loss Phenomena in a SOFC Stack
  43. Yttrium silicate coating system for oxidation protection of C/C–Si–SiC composites: Electrophoretic deposition and oxygen self-diffusion measurements
  44. Perovskite and Composite Materials for Intermediate Temperatures Solid Oxide Fuel Cells
  45. Oxidation protection of C/C–SiC composites by an electrophoretically deposited mullite precursor: Cyclic thermogravimetric analysis
  46. An impedance study of the electrophoretic deposition from yttrium silicate suspensions
  47. Enhancement of oxygen surface kinetics of SrTiO3 by alkaline earth metal oxides
  48. Diffusion Study of Cerium and Gadolinium in Single- and Polycrystalline Yttria-Stabilized Zirconia
  49. Synthesis and Electrophoretic Deposition of Mullite Precursor Sols for the Oxidation Protection of Carbon Fibre Reinforced Composites
  50. Synthesis and Electrophoretic Deposition of Mullite Precursor Sols for the Oxidation Protection of Carbon Fibre Reinforced Composites
  51. Diffusion Study of Cerium and Gadolinium in Single- and Polycrystalline Yttria-Stabilized Zirconia
  52. Preparation of SOFC Cells by Means of Electrophoretic Deposition
  53. Electrophoretic Deposition of Mullite Based Oxygen Diffusion Systems on C/C-Si-SiC Composites
  54. Preparation of SOFC Cells by Means of Electrophoretic Deposition
  55. Electrophoretic Deposition of Mullite Based Oxygen Diffusion Systems on C/C-Si-SiC Composites
  56. Synthesis and Characterization of Strontium Titanate Nanoparticles as Potential High Temperature Oxygen Sensor Material
  57. Lattice and grain boundary diffusion of cations in 3YTZ analyzed using SIMS
  58. Synthesis and Electrophoretic Deposition of an Yttrium Silicate Coating System for Oxidation Protection of C/C-Si-SiC Composites
  59. Modelling and Experimental Verification of the Oxidation Protection of C/C-Si-SiC Composites with Mullite
  60. Synthesis and Electrophoretic Deposition of an Yttrium Silicate Coating System for Oxidation Protection of C/C-Si-SiC Composites
  61. Modelling and Experimental Verification of the Oxidation Protection of C/C-Si-SiC Composites with Mullite
  62. Nitrogen Tracer Diffusion in Yttria Doped Zirconium Oxonitride
  63. Oxidation protection of C/C–SiC composites by an electrophoretically deposited mullite precursor
  64. Adsorption of oxygen on a nickel covered SrTiO 3 (100) surface studied by means of Auger electron spectroscopy and work function measurements
  65. Enhancement of oxygen surface exchange kinetics of SrTiO3 by alkaline earth metal oxides
  66. Nitrogen Diffusion in Nitrogen-Doped Yttria Stabilized Zirconia.
  67. Correlation between ionic radius and cation diffusion in stabilised zirconia
  68. Lanthanide transport in stabilized zirconias: Interrelation between ionic radius and diffusion coefficient
  69. THE DEVELOPMENT OF NICKEL ULTRA-THIN FILMS AND THE INTERACTION WITH OXYGEN ON THE SrTiO 3 (100) SURFACE STUDIED BY SOFT X-RAYS PHOTOELECTRON SPECTROSCOPY
  70. Electrophoretic Deposition of Thin SOFC-Electrolyte Films on Porous La0,75Sr0,2MnO3-δ Cathodes
  71. Sol-Gel Route for Electrophoretic Deposition of Mullite Diffusion Barriers on C/C-SiC Composites
  72. Ni ultrathin film development on SrTiO3(100) surface
  73. Nitrogen diffusion in nitrogen-doped yttria stabilised zirconia
  74. SIMS study of transition metal transport in single crystalline yttria stabilised zirconia
  75. Oxygen diffusion in yttria stabilised zirconia—experimental results and molecular dynamics calculations
  76. Cation tracer diffusion of138La,84Sr and25Mg in polycrystalline La0.9Sr0.1Ga0.9Mg0.1O2.9
  77. Cation self-diffusion of [sup 44]Ca, [sup 88]Y, and [sup 96]Zr in single-crystalline calcia- and yttria-doped zirconia
  78. Experimental and theoretical investigation of oxygen diffusion in stabilised zirconia