All Stories

  1. Thermal treatment of MgO refractories in a pilot furnace heated with microwave plasma burner
  2. Recyclate-containing magnesia-carbon refractories – Influence on the non-metallic inclusions in steel
  3. Studies on the use of two different magnesia-carbon recyclates as secondary raw material for MgO–C refractories
  4. Utilization of Recycled Material for Producing Magnesia–Carbon Refractories
  5. Influence of processing parameters on the surface quality of electrophoretically deposited alumina coatings on foam ceramics
  6. Magnesia‐carbon refractories from recycled materials
  7. Porous alumina coatings on carbon-bonded foam filters by electrophoretic deposition
  8. Nano-functionalization of carbon-bonded alumina using graphene oxide and MWCNTs
  9. Electroacoustic investigation of aqueous suspensions of raw materials for Al2O3-C refractories
  10. Untersuchungen zum Druckschlickerguss von kohlenstoffgebundenem Aluminiumoxid
  11. Pressure slip casting of coarse-grained alumina-carbon materials
  12. Investigation on Pressure Slip Casting of Carbon Bonded Alumina
  13. Activated reaction synthesis of silicon oxynitride from silica and silicon nitride
  14. Comparative Phenomenological Study of Fracture Behavior of Ceramic and Glass Foams under Compressive Stress Using In Situ X-Ray Microtomography
  15. Enhancing the thermal shock resistance of alumina-rich magnesium aluminate spinel refractories by an aluminum titanate phase
  16. Oxide ceramics with unidirectional pore channels by electrophoretic deposition
  17. Electrophoretic Method for Fabricating Porous Ceramics – Application to Different Oxide Materials
  18. Electrophoretic deposition of yttria-stabilised zirconia powder from aqueous suspensions for fabricating ceramics with channel-like pores
  19. Ceramics with Regularly Arranged Tubular Pores by Electrophoretic Deposition at Gauze Electrodes
  20. ZrO2 ceramics with aligned pore structure by EPD and their characterisation by X-ray computed tomography
  21. Development of mullite and mullite/Al2O3 precursor sols for electrophoretic deposition of oxidation protection coatings
  22. Electrophoretically Deposited Porous Ceramics and their Characterisation by X-Ray Computer Tomography
  23. Oxidation protection of C/C–SiC composites by an electrophoretically deposited mullite precursor: Cyclic thermogravimetric analysis
  24. Investigation of the electrophoretic deposition behaviour of non-aqueous ceramic suspensions
  25. Electrophoretic deposition applied to ceramic dental crowns and bridges
  26. Synthesis and Electrophoretic Deposition of Mullite Precursor Sols for the Oxidation Protection of Carbon Fibre Reinforced Composites
  27. Anwendung der Elektrophorese zur Herstellung von CMCs
  28. Electrophoretic Deposition of Mullite Based Oxygen Diffusion Systems on C/C-Si-SiC Composites
  29. Electrophoretic Deposition of Ceramic Powders-Influence of Suspension and Processing Parameters
  30. Electrophoretic Deposition of Mullite Based Oxygen Diffusion Systems on C/C-Si-SiC Composites
  31. Electrophoretic Deposition of Ceramic Powders-Influence of Suspension and Processing Parameters
  32. Studies on a Novel Route to C/SiC
  33. Electrophoretic Infiltration of Woven Carbon Fibre Mats with SiC Powder Suspensions