All Stories

  1. Development of Smart Clothing to Prevent Pressure Injuries in Bedridden Persons and/or with Severely Impaired Mobility: 4NoPressure Research Protocol
  2. Switchable Polyacrylic Acid Polyelectrolyte Brushes for Surface Plasmon Resonance Applications
  3. Comparative Thermoelectric Properties of Polypropylene Composites Melt-Processed Using Pyrograf® III Carbon Nanofibers
  4. Thermoelectric and Structural Properties of Transparent Sb-Doped ZnO Thin Films Sputtered in a Confocal Geometry
  5. Thermoelectric and Structural Properties of Sputtered AZO Thin Films with Varying Al Doping Ratios
  6. Surface Atomic Arrangement of Aluminum Ultra-Thin Layers Grown on Si(111)
  7. Nano-SnO2/polyaniline composite films for surface plasmon resonance
  8. The effect of Bi doping on the thermal conductivity of ZnO and ZnO:Al thin films
  9. HR MAS NMR, dielectric impedance and XRD characterization of polyethylene oxide films for structural phase transitions
  10. Effect of AlNPs distribution on the optical and electrical properties of PANI/AlNPs nanocomposite films
  11. Size Effect in Hybrid TiO2:Au Nanostars for Photocatalytic Water Remediation Applications
  12. Nanoparticles positioning effect on properties of (PS‐PANI/NiNPs) nanocomposite films
  13. Effect of gallium doping on structural and transport properties of the topological insulator Bi2Se3 grown by molecular beam epitaxy
  14. Physical and chemical characterization of polyaniline (PANI)/Indium tin oxide nanoparticles (ITONPs) nanocomposite films
  15. Effect of hydrogen-related shallow donor on the physical and chemical properties of Ag-doped ZnO nanostructures
  16. PMMA Microcapsules for the Inactivation of SARS-CoV-2
  17. UV-light assisted synthesis of high silica faujasite-type zeolite
  18. XPS , UV–Vis , XRD, and PL spectroscopies for studying nickel nanoparticle positioning effect on nanocomposite film properties
  19. Microencapsulation of Essential Oils: A Review
  20. Multifunctional hybrid membranes for photocatalytic and adsorptive removal of water contaminants of emerging concern
  21. Photoisomerization kinetics of a novel photoswitchable film based on methyl red doped with sodium hexachloroplatinate hosted in polyethylene oxide
  22. Joining of Zirconia to Ti6Al4V Using Ag-Cu Sputter-Coated Ti Brazing Filler
  23. Biodegradable Polymers for Microencapsulation Systems
  24. Optical, electrical and morphological properties of (PANI/CSA-PEO)/(AgNPs-AgNO3) nanocomposite films
  25. Optical and structural properties of ZnO NPs and ZnO–Bi2O3 nanocomposites
  26. Transparent niobium-doped titanium dioxide thin films with high Seebeck coefficient for thermoelectric applications
  27. Use and misuse of the Kubelka-Munk function to obtain the band gap energy from diffuse reflectance measurements
  28. Effect of Cu-In-Ga Target Composition on Hybrid-Sputtered Cu(In,Ga)Se2 Solar Cells
  29. Development of Photocatalytic 3D-Printed Cementitious Mortars: Influence of the Curing, Spraying Time Gaps and TiO2 Coating Rates
  30. The role of Ga and Bi doping on the local structure of transparent zinc oxide thin films
  31. Is Poly(methyl methacrylate) (PMMA) a Suitable Substrate for ALD?: A Review
  32. Dielectric relaxation, XPS and structural studies of polyethylene oxide/iodine complex composite films
  33. Joining Alumina to Titanium Alloys Using Ag-Cu Sputter-Coated Ti Brazing Filler
  34. Influence of Nb-doping on the local structure and thermoelectric properties of transparent TiO2:Nb thin films
  35. Corrigendum to “Compositional analysis by RBS, XPS and EDX of ZnO:Al,Bi and ZnO:Ga,Bi thin films deposited by d.c. magnetron sputtering” [Vacuum 161 (2019) 268–275]
  36. Photocatalytic and antimicrobial multifunctional nanocomposite membranes for emerging pollutants water treatment applications
  37. Photocatalytic Bi2O3/TiO2:N Thin Films with Enhanced Surface Area and Visible Light Activity
  38. Chemical preparation, crystal structure, Hirshfeld surface analysis, spectroscopy, DFT studies, thermal decomposition and magnetic measurements of (C4H12N2)[FeCl3(H2O)3]Cl2
  39. Self-assembly modification of polyamide membrane by coating titanium dioxide nanoparticles for water treatment applications
  40. Selected contributions from the 4th Photocatalytic and Superhydrophilic Surfaces Workshop, PSS2017
  41. Ultrasonic synthesis of Oct. trans-Br2Cu(N ∩ N)2 Jahn-Teller distortion complex: XRD-properties, solvatochromism, thermal, kinetic and DNA-binding evaluations
  42. Nb-doped Ti2O3 Films Deposited Through Grid-Assisted Magnetron Sputtering on Glass Substrate: Electrical and Optical Analysis
  43. Comprehensive design analysis of ZnO anti-reflection nanostructures for Si solar cells
  44. Compositional analysis by RBS, XPS and EDX of ZnO:Al,Bi and ZnO:Ga,Bi thin films deposited by d.c. magnetron sputtering
  45. Synthesis of Bi2O3/TiO2 nanostructured films for photocatalytic applications
  46. Joining of TiAl Alloy Using Novel Ag–Cu Sputtered Coated Ti Brazing Filler
  47. Combined in-depth X-ray Photoelectron Spectroscopy and Time-of-Flight Secondary Ion Mass Spectroscopy study of the effect of deposition pressure and substrate bias on the electrical properties and composition of Ga-doped ZnO thin films grown by magnetr...
  48. XPS analysis of ZnO:Ga films deposited by magnetron sputtering: Substrate bias effect
  49. Joining of γ-TiAl Alloy to Ni-Based Superalloy Using Ag-Cu Sputtered Coated Ti Brazing Filler Foil
  50. Synthesis and characterization of photocatalytic polyurethane and poly(methyl methacrylate) microcapsules for the controlled release of methotrexate
  51. A new route for the synthesis of highly-active N-doped TiO2 nanoparticles for visible light photocatalysis using urea as nitrogen precursor
  52. Corrigendum to Effect on the electrical and morphological properties of Bi incorporation into ZnO:Ga and ZnO:Al thin films deposited by confocal magnetron sputtering [Vacuum 152 (2018) 252–260]
  53. Effect on the electrical and morphological properties of Bi incorporation into ZnO:Ga and ZnO:Al thin films deposited by confocal magnetron sputtering
  54. Synthesis, solvatochromism and crystal structure of trans -[Cu(Et 2 NCH 2 CH 2 NH 2 ) 2 .H 2 O](NO 3 ) 2 complex: Experimental with DFT combination
  55. Development of stable current collectors for large area dye-sensitized solar cells
  56. Optical and structural analysis of solar selective absorbing coatings based on AlSiOx:W cermets
  57. Microencapsulation of citronella oil for solar-activated controlled release as an insect repellent
  58. Diethylenetriamine/diamines/copper (II) complexes [Cu(dien)(NN)]Br2: Synthesis, solvatochromism, thermal, electrochemistry, single crystal, Hirshfeld surface analysis and antibacterial activity
  59. Comparative efficiency of TiO2 nanoparticles in suspension vs. immobilization into P(VDF–TrFE) porous membranes
  60. Multifunctional Ti–Me (Me=Al, Cu) thin film systems for biomedical sensing devices
  61. Solar selective absorbing coatings based on AlSiN/AlSiON/AlSiO y layers
  62. Development of electrospun photocatalytic TiO2-polyamide-12 nanocomposites
  63. Dependence of Ga-doped ZnO thin film properties on different sputtering process parameters: Substrate temperature, sputtering pressure and bias voltage
  64. Preparation of robust polyamide microcapsules by interfacial polycondensation ofp-phenylenediamine and sebacoyl chloride and plasticization with oleic acid
  65. Deposition of Pd–Ag thin film membranes on ceramic supports for hydrogen purification/separation
  66. Improving Photocatalytic Performance and Recyclability by Development of Er-Doped and Er/Pr-Codoped TiO2/Poly(vinylidene difluoride)–Trifluoroethylene Composite Membranes
  67. Influence of hydrogen plasma thermal treatment on the properties of ZnO:Al thin films prepared by dc magnetron sputtering
  68. Study of the effect of the silver content on the structural and mechanical behavior of Ag–ZrCN coatings for orthopedic prostheses
  69. Synthesis of iron-doped TiO2 nanoparticles by ball-milling process: the influence of process parameters on the structural, optical, magnetic, and photocatalytic properties
  70. Optimisation of surface treatments of TiO2:Nb transparent conductive coatings by a post-hot-wire annealing in a reducing H2 atmosphere
  71. Photocatalytic thin films coupled with polymeric microcapsules for the controlled-release of volatile agents upon solar activation
  72. Food contact surfaces coated with nitrogen-doped titanium dioxide: effect on Listeria monocytogenes survival under different light sources
  73. Release of Volatile Compounds from Polymeric Microcapsules Mediated by Photocatalytic Nanoparticles
  74. Influence of Substrate Temperature and Post-Annealing Treatment on the Microstructure and Electric Properties of ZnO:Al Thin Films Deposited by Sputtering
  75. Electron backscatter diffraction analysis of ZnO:Al thin films
  76. Effect of hot-filament annealing in a hydrogen atmosphere on the electrical and structural properties of Nb-doped TiO2 sputtered thin films
  77. Drinking water treatment in a gravimetric flow system with TiO2 coated membranes
  78. Nucleation of the Electroactive γ Phase and Enhancement of the Optical Transparency in Low Filler Content Poly(vinylidene)/Clay Nanocomposites
  79. Micro and nanofilms of poly(vinylidene fluoride) with controlled thickness, morphology and electroactive crystalline phase for sensor and actuator applications
  80. Mn-doped ZnO nanocrystals embedded in Al 2 O 3 : structural and electrical properties
  81. Photocatalytic degradation of C.I. Reactive Blue 19 with nitrogen-doped TiO2 catalysts thin films under UV/visible light
  82. X-ray scattering experiments on sputtered titanium dioxide coatings onto PVDF polymers for self-cleaning applications
  83. Strain dependence electrical resistance and cohesive strength of ITO thin films deposited on electroactive polymer
  84. Erratum: “Enhancement of the photocatalytic nature of nitrogen-doped PVD-grown titanium dioxide thin films” [J. Appl. Phys. 106, 113535 (2009)]
  85. N-Doped Photocatalytic Titania Thin Films on Active Polymer Substrates
  86. Enhancement in the photocatalytic nature of nitrogen-doped PVD-grown titanium dioxide thin films
  87. The role of composition, morphology and crystalline structure in the electrochemical behaviour of TiNx thin films for dry electrode sensor materials
  88. Structural and electrical properties of Al doped ZnO thin films deposited at room temperature on poly(vinilidene fluoride) substrates
  89. Structural evolution of Ti–Al–Si–N nanocomposite coatings
  90. PVD-Grown photocatalytic TiO2 thin films on PVDF substrates for sensors and actuators applications
  91. XRD and FTIR analysis of Ti–Si–C–ON coatings for biomedical applications
  92. Transmission electron microscopy analysis of the interfaces of TiAlN/Mo multilayers
  93. Study of Nd-doping effect and mechanical cracking on photoreactivity of TiO2 thin films
  94. Strain analysis of photocatalytic TiO2 thin films on polymer substrates
  95. Iron-doped photocatalytic TiO2 sputtered coatings on plastics for self-cleaning applications
  96. Reactive sputtering deposition of photocatalytic TiO2 thin films on glass substrates
  97. Optimization and thermal stability of TiAlN/Mo multilayers
  98. Hard ZrO2/Al2O3 nanolaminated PVD coatings evaluated by nanoindentation
  99. Structural, electrical, optical, and mechanical characterizations of decorative ZrOxNy thin films
  100. Atomic environment and interfacial structural order of TiAlN/Mo multilayers
  101. Microstructure, mechanical properties and cutting performance of superhard (Ti,Si,Al)N nanocomposite films grown by d.c. reactive magnetron sputtering
  102. Solving SAT with a Context-Switching Virtual Clause Pipeline and an FPGA Embedded Processor
  103. HRTEM interfacial analysis on superhard TiAlN/Mo multilayers
  104. PVD grown (Ti,Si,Al)N nanocomposite coatings and (Ti,Al)N/(Ti,Si)N multilayers: structural and mechanical properties
  105. Nanometer-Scale Multilayered Mo/Ti0.4Al0.6N Hard Coatings
  106. Study of roughness in Ti0.4Al0.6N/Mo multilayer structures
  107. Microstructure of superhard (Ti,Al)N/Mo multilayers
  108. Mechanical and surface analysis of Ti0.4Al0.6N/Mo multilayers
  109. A structural and mechanical analysis on PVD-grown (Ti,Al)N/Mo multilayers
  110. Hard nanocomposite Ti–Si–N coatings prepared by DC reactive magnetron sputtering
  111. Structure determination of (Ti,Al)N/Mo multilayers
  112. Friction and adhesion behavior of polycrystalline diamond films deposited on metals
  113. Mechanical characterisation of TiN/ZrN multi-layered coatings
  114. Deposition and characterization of multilayered TiN/ZrN coatings
  115. Structural characterization of multilayered sputtered TiN/ZrN coatings
  116. Interfacial roughness of multilayered coatings
  117. Autler-townes splittings of photo-excited point defects
  118. Autler-Townes modulation of coherent transients in photoexcited color centers
  119. Iodinated phospholipids and the in vitro iodination of proteins of dog thyroid gland