All Stories

  1. Advancements in the Development of Biostable Polyurethanes
  2. Design and characterization of sustainable bio-composites from waste chicken feather keratin and thermoplastic polyurethane
  3. Morphology and surface properties of high strength siloxane poly(urethane-urea)s developed for heart valve application
  4. A Gallium-Based Magnetocaloric Liquid Metal Ferrofluid
  5. Slip-additive migration, surface morphology, and performance on injection moulded high-density polyethylene closures
  6. Thermoplastic starch-nanohybrid films with polyhedral oligomeric silsesquioxane
  7. Development of high strength siloxane poly(urethane-urea) elastomers based on linked macrodiols for heart valve application
  8. Effect of salt on the glass transition of condensed tapioca starch systems
  9. Tocopheryl acetate release from microcapsules of waxy maize starch
  10. Avian keratin fibre-based bio-composites
  11. Flexible starch-polyurethane films: Physiochemical characteristics and hydrophobicity
  12. Mechanism of phase separation in a weakly interacting system with strong dynamic asymmetry
  13. Effect of the glass transition temperature on alpha-amylase activity in a starch matrix
  14. Recent Advances in Polyurethane-Based Nanocomposites: A Review
  15. Recycled synthetic polymer fibers in composites
  16. Viscoelastic characterization of multifunctional composites incorporated with microencapsulated phase change materials
  17. Structure and phase behaviour of microcrystalline cellulose in mixture with condensed systems of potato starch
  18. Creep and Recovery Behaviour of Polyolefin-Rubber Nanocomposites Developed for Additive Manufacturing
  19. Interfacial interactions of thermally reduced graphene in poly(trimethylene terephthalate)-epoxy resin based composites
  20. The Influence of Trisilanolisobutyl POSS on Domain Microstructure of a Polyurethane Hybrid Composite: A Molecular Simulation Approach
  21. Thermophysical properties of multifunctional glass fibre reinforced polymer composites incorporating phase change materials
  22. Imaging the phase of starch–gelatin blends by confocal Raman microscopy
  23. Properties of cementitious mortar and concrete containing micro-encapsulated phase change materials
  24. Calcium chloride effects on the glass transition of condensed systems of potato starch
  25. Functionalised graphene-multiwalled carbon nanotube hybrid poly(styrene- b -butadiene- b -styrene) nanocomposites
  26. Review on the Effects of Process Parameters on Strength, Shrinkage, and Warpage of Injection Molding Plastic Component
  27. Characterization of nanocomposite filaments developed for additive manufacturing
  28. Conductive polyolefin–rubber nanocomposites with carbon nanotubes
  29. Diffusion of nicotinic acid in spray-dried capsules of whey protein isolate
  30. Preparation, characterisation, andin vitroevaluation of electrically conducting poly(ɛ-caprolactone)-based nanocomposite scaffolds using PC12 cells
  31. Micro- and Nanostructured Polymer Systems
  32. Deterioration of polyaramid and polybenzimidazole woven fabrics after ultraviolet irradiation
  33. Mechanical reprocessing of polyolefin waste: A review
  34. Effect of sodium chloride on the glass transition of condensed starch systems
  35. Study of dielectric and mechanical properties of epoxy/SiO2 nanocomposite prepared by different processing techniques
  36. The Effect of Humping Semi-Enclosed Cage Structure on Polymer Chains Characteristics of TSI-POSS/PU Hybrid Composites
  37. Characterization of kenaf fiber composites prepared with tributyl citrate plasticized cellulose acetate
  38. Crystallite Cluster Structure Formation Resulting from Semi-Enclosed Cage Interaction in TSI-POSS/PU Hybrid Composites
  39. Fiber preparation and mechanical properties of recycled polypropylene for reinforcing concrete
  40. Preparation of graphene and inclusion in composites with poly(styrene-b-butadiene-b-styrene)
  41. Purification of avian biological material to refined keratin fibres
  42. Isolation and application of cellulosic fibres in composites
  43. Multiple melting behavior of poly(lactic acid)-hemp-silica composites using modulated-temperature differential scanning calorimetry
  44. Highly-filled hybrid composites prepared using centrifugal deposition
  45. Modification and evaluation of thermal properties of melamine-formaldehyde/n-eicosane microcapsules for thermo-regulation applications
  46. Enzymatic catalysis in a whey protein matrix at temperatures in the vicinity of the glass transition
  47. Epoxy–silica composites replicating wood cell structure
  48. Trisilanolisobutyl POSS/polyurethane hybrid composites: preparation, WAXS and thermal properties
  49. Biomimetic materials: A challenge for nano-scale self-assembly
  50. Effects of Different Purification Methods on Chicken Feather Keratin
  51. Comparative Study between DSC and Two Complementary Performance Evaluation Methods for PCM-Treated Textiles
  52. Elevation of charring level of polyamide-6,6 films via ionic introduction of phosphoric acid and boric acid esters
  53. Cellulose fibre-cellulose acetate hybrid composites with nanosilica
  54. Phase Composition of Starch-Gelatin Blends Studied by FTIR
  55. Properties enhancement in multiwalled carbon nanotube-magnetite hybrid-filled polypropylene natural rubber nanocomposites through functionalization and processing methods
  56. Influence of stereochemistry on the miscibility of polymer blends
  57. Preface
  58. Polymer Blends
  59. Bio-composites based on cellulose acetate and kenaf fibers: Processing and properties
  60. Chemistry and structure of cellulosic fibres as reinforcements in natural fibre composites
  61. Characterization of Nanostructured Materials
  62. Morphology and phase composition of gelatin-starch blends
  63. Plasma polymerised thin films for flexible electronic applications
  64. Processing Cellulose for Cellulose Fiber and Matrix Composites
  65. Cellulose-Based Nanocomposites: Processing Techniques
  66. Phase composition and interface of starch–gelatin blends studied by synchrotron FTIR micro-spectroscopy
  67. Thermoplastic starch films: DOE and O2PLS methodology for optimization and increased understanding of polymer processing
  68. Dynamic and Modulated Mechanical Evaluation of Polymer Structures
  69. Mechanical properties of self-reinforced poly(lactic acid) composites prepared by compression moulding of non-woven precursors
  70. Developing gelatin–starch blends for use as capsule materials
  71. General Purpose Elastomers: Structure, Chemistry, Physics and Performance
  72. CHAPTER 20. Linear and Non-Linear Viscoelastic Behaviour of Natural Rubber Composites from Micro- to Nanoscales
  73. In situ small angle X-ray scattering investigation of the thermal expansion and related structural information of carbon nanotube composites
  74. Multiwalled carbon nanotubes-magnetite reinforced thermoplastic polypropylene-natural rubber blends
  75. Compacted nanosilica-talc /calcium carbonate polyacrylate composites prepared using accelerated sedimentation
  76. Preparation and properties of poly(propylene-g-maleic anhydride) filled with expanded graphite oxide
  77. Novel polyhedral oligomeric silsesquioxane-substituted dendritic polyester tougheners for linear thermoplastic polyurethane
  78. Thermoplastic Starch
  79. Thermoplastic Elastomers
  80. Novel elastomer dye-functionalised POSS nanocomposites: Enhanced colourimetric, thermomechanical and thermal properties
  81. Interlayer self-healing and toughening of carbon fibre/epoxy composites using copolymer films
  82. Thermal and Optical Characterization of Polymer-Dispersed Liquid Crystals
  83. Novel elastomer-dumbbell functionalized POSS composites: Thermomechanical and Morphological Properties
  84. Thermal, Optical, and Static/Dynamic Mechanical Properties of Linear-core Crosslinked Star Polymer Blends
  85. Enthalpy and Volume Relaxation of Core-Crosslinked Star Polystyrene/Poly(methyl methacrylate) Blends
  86. Linear thermal expansion, thermal ageing, relaxations and post-cure of thermoset polymer composites using modulated temperature thermomechanometry
  87. Gelatinization and retrogradation of thermoplastic starch characterized using modulated temperature differential scanning calorimetry
  88. Comparison of reversible melting behaviour of poly(3-hydroxybutyrate) using quasi-isothermal and other modulated temperature differential scanning calorimetry techniques
  89. Thermoplastic starch–silica–polyvinyl alcohol composites by reactive extrusion
  90. Development of high stability catalysts to facilitate CO2 capture into water–An alternative to monoethanolamine and amine solvents
  91. Physically Networked Polymers: Materials that change with their environment
  92. Synthesis, Characterization and Application Polystyrene-Bound Manganese Complexes
  93. Characterization and Thermal Behaviour of Polymer-Dispersed Liquid Crystals
  94. Thermal Relaxations of Polymers Revealed by Reversing and Non-Reversing Coefficient of Thermal Expansion
  95. Poly(styrene-b-butadiene-b-styrene)-Dye-Coupled Polyhedral Oligomeric Silsesquioxanes
  96. Fabrication and Characterization of RF Plasma Polymerized Thin Films from 3,7-Dimethyl-1,6-octadien-3-ol for Electronic and Biomaterial Applications
  97. Ceramifying Fire-Retardant and Fire-Barrier Unsaturated Polyester Composites
  98. Fire-retardant and fire-barrier poly(vinyl acetate) composites for sealant application
  99. Morphology and Structure of Modified Oil Palm Empty Fruit Bunch Cellulose Fibre
  100. Interfacial properties of all-polypropylene composites
  101. Crystallinity and structure of starch using wide angle X-ray scattering
  102. Preparation, structure and mechanical properties of all-hemp cellulose biocomposites
  103. Surface and Chemical Characterization of PolyLA Thin Films Fabricated Using Plasma Polymerization
  104. Biocomposites of Natural Fibers and Poly(3-Hydroxybutyrate) and Copolymers: Improved Mechanical Properties Through Compatibilization at the Interface
  105. Polypropylene–microcrystalline cellulose composites with enhanced compatibility and properties
  106. Fabrication and characterisation of polymer thin-films derived from cineole using radio frequency plasma polymerisation
  107. Biocomposites of Cellulose Acetate Butyrate with Modified Hemp Cellulose Fibres
  108. Modelling of polypropylene fibre-matrix composites using finite element analysis
  109. Miscibility, melting, and crystallization behavior of poly(hydroxybutyrate) and poly(D,L-lactic acid) blends
  110. Poly(4-vinylpyridine)-based hydrogen bonded side-chain liquid crystal polymers
  111. Oxygen barrier property of polypropylene-polyether treated clay nanocomposite
  112. Fire performance of poly(dimethyl siloxane) composites evaluated by cone calorimetry
  113. Creep behaviour of biopolymers and modified flax fibre composites
  114. Thermoplastic polymer‐dispersed liquid crystals prepared from solvent‐induced phase separation with predictions using solubility parameters
  115. Effect of additives on the interfacial strength of poly(l-lactic acid) and poly(3-hydroxy butyric acid)-flax fibre composites
  116. Time-Temperature Creep Behaviour of Poly(propylene) and Polar Ethylene Copolymer Blends
  117. Morphology, Thermal Stability, and Mechanical Behavior of [Poly(propylene)-grafted Maleic Anhydride]-Layered Expanded Graphite Oxide Composites
  118. Structural, mechanical and dielectric properties of poly(ethylene-co-methyl acrylate-co-acrylic acid) graphite oxide nanocomposites
  119. Structural and thermal interpretation of the synergy and interactions between the fire retardants magnesium hydroxide and zinc borate
  120. New Ceramifying Polymer Materials for Passive Fire Protection Applications
  121. Molecular functionality and self-assembled polymer compositions
  122. Mechanical and thermal properties of toughened polypropylene composites
  123. Isothermal crystallization studies of poly(butylene terephthalate) composites
  124. Admicellar polymerization of styrene with divinyl benzene on alumina particles: the synthesis of white reinforcing fillers
  125. Crystallisation, melting, recrystallisation and polymorphism of n-eicosane for application as a phase change material
  126. Isothermal crystallisation kinetics of poly(3-hydroxybutyrate) using step-scan DSC
  127. Solvent and enzyme induced recrystallization of mechanically degraded hemp cellulose
  128. Mechanical and Thermal Properties of Flexible Poly(propylene) Composites
  129. Composites of poly(lactic acid) with flax fibers modified by interstitial polymerization
  130. Poly(caprolactone) thin film preparation, morphology, and surface texture
  131. Properties of hydrophobically modified polyacrylamide with low molecular weight and interaction with surfactant in aqueous solution
  132. Monte Carlo simulations of properties of side-chain liquid-crystal polymers
  133. Acrylic acid level and adhesive performance and peel master-curves of acrylic pressure-sensitive adhesives
  134. Multiple melting behaviour of poly(3-hydroxybutyrate-co-hydroxyvalerate) using step-scan DSC
  135. Composition, structure and thermal degradation of hemp cellulose after chemical treatments
  136. Molecular dynamics simulation of diffusion of O2 and CO2 in blends of amorphous poly(ethylene terephthalate) and related polyesters
  137. Separation and identification of multicomponent mixture by thin-layer chromatography coupled with Fourier transform–infrared microscopy
  138. Melting and thermal history of poly(hydroxybutyrate-co-hydroxyvalerate) using step-scan DSC
  139. Comparison of Styrene with Methyl Methacrylate Copolymers on the Adhesive Performance and Peeling Master Curves of Acrylate Pressure Sensitive Adhesives
  140. The synthesis and thermal properties of polyepichlorohydrin side-chain liquid crystal polymers
  141. Tensile creep behaviour of polypropylene fibre reinforced polypropylene composites
  142. Morphology and Structure of Hemp Fibre after Bioscouring
  143. Cure rate and dry etch patterning of thermoset polymers
  144. Prediction of liquid crystalline properties of poly(1,4-phenylene sebacate-oxybenzoate) by Monte Carlo simulation
  145. Back Cover: Macromol. Mater. Eng. 1/2005
  146. Influence of Different Woven Geometry in Poly(propylene) Woven Composites
  147. Composites of poly(lactic acid) with flax fibers modified by interstitial polymerization
  148. The effect of fiber concentration on mechanical and thermal properties of fiber-reinforced polypropylene composites
  149. Thermal memory of poly(3-hydroxybutyrate) using temperature-modulated differential scanning calorimetry
  150. Rheological and thermal properties of single-site polyethylene blends
  151. Thermal properties of polypropylene post-consumer waste (PP PCW)
  152. Thermal history effects on crystallisation and melting of poly(3-hydroxybutyrate)
  153. The Effect of Chain Transfer Agent Level on Adhesive Performance and Peel Master-Curves for Acrylic Pressure Sensitive Adhesives
  154. Concentration dependence of static and hydrodynamic screening lengths for three different polymers in a variety of solvents
  155. Tensile properties and creep response of polypropylene fibre composites with variation of fibre diameter
  156. Synthesis and characterisation of hydrophobic modified polyacrylamide
  157. Molecular distribution analysis of melt-crystallized ethylene copolymers
  158. Interfacial improvements in poly(3-hydroxybutyrate)-flax fibre composites with hydrogen bonding additives
  159. Structural and Mechanical Properties Changes of Ethylene-α-olefin Copolymer Blends Induced by Thermal Treatments and Composition
  160. Evaluation of polar ethylene copolymers as fire retardant nanocomposite matrices
  161. Mechanical Behavior and Fracture Toughness of Poly(L-lactic acid)-Natural Fiber Composites Modified with Hyperbranched Polymers
  162. Synthesis and Characterisation of Side-Chain Liquid Crystalline Poly[1-({[(4-cyano-4′-biphenyl)oxy]alkyl}oxy)-2,3-epoxypropane]
  163. Morphological and grafting modification of natural cellulose fibers
  164. TMDSC analysis of single-site copolymer blends after thermal fractionation
  165. The effect of varied monomer composition on adhesive performance and peeling master curves for acrylic pressure-sensitive adhesives
  166. Solubility study of polyacrylamide in polar solvents
  167. Dynamic Mechanical Properties of Poly(propylene) Blends with Poly[ethylene-co-(methyl acrylate)]
  168. Crystallization and melting of isotactic rolypropylene in response to temperature modulation
  169. Characterisation of the comonomer composition and distribution of copolymers using chemometric techniques
  170. Alternative solutions: recyclable synthetic fibre–thermoplastic composites
  171. Molecular dynamics simulation of diffusion of O2 and CO2 in amorphous poly(ethylene terephthalate) and related aromatic polyesters
  172. Poly(L-lactic acid) composites with flax fibers modified by plasticizer absorption
  173. Thermal memory of polyethylenes analyzed by temperature modulated differential scanning calorimetry
  174. Morphology, Thermal and Mechanical Properties of Poly(propylene) Fibre-Matrix Composites
  175. Morphology and mechanical properties of polypropylene and poly(ethylene-co-methyl acrylate) blends
  176. Conformation of polyacrylamide in aqueous solution with interactive additives and cosolvents
  177. Thermal behavior and molecular simulation of liquid crystalline polymers containing a pentamethylenic spacer
  178. Molecular Dynamics Simulation of Azobenzene Liquid Crystalline Polymers
  179. Miscibility and crystallization of metallocene polyethylene blends with polypropylene
  180. Thermoplastic biopolyester natural fiber composites
  181. Properties of Poly(3-hydroxybutyric acid) Composites with Flax Fibres Modified by Plasticiser Absorption
  182. Analysis of additives in polymers by thin-layer chromatography coupled with Fourier transform-infrared microscopy
  183. Properties of Poly(3-hydroxybutyric acid) Composites with Flax Fibres Modified by Plasticiser Absorption
  184. Simulation of diffusion of O 2 and CO 2 in amorphous poly(ethylene terephthalate) and related alkylene and isomeric polyesters
  185. Morphological analysis of linear low density polyethylene films by atomic force microscopy
  186. Miscibility behavior of metallocene polyethylene blends
  187. Miscibility and isothermal crystallisation of polypropylene in polyethylene melts
  188. Molecular simulation and experimental characterisation of monotropic and enantiotropic polymers containing azobenzene and diphenyl mesogens
  189. Solution-mediated transformation of photographic coupler
  190. Crystallisation of single-site polyethylene blends investigated by thermal fractionation techniques
  191. Characterization of polyolefin melts using the polymer reference interaction site model integral equation theory with a single-site united atom model
  192. X-ray diffraction studies on reverse-annealed polyethylenes
  193. Processing, crystallization, and dynamic mechanical analysis of high molar mass polysiloxane-modified PP/CaCO3 composites
  194. Miscibility behavior of metallocene polyethylene blends
  195. Isothermal crystallization and spherulite structure of partially miscible polypropylene-linear low-density polyethylene blends
  196. Crystallization and melting of highly filled polypropylene composites prepared with surface-treated fillers
  197. Simulation of the specific interactions between polyamide-6 and a thermoplastic polyurethane
  198. Microscopic study of polymorphism of a photographic coupler
  199. Crystallization and compatibilization of polypropylene–liquid crystalline polyester blends
  200. Crystallisation of blends of LLDPE with branched VLDPE
  201. Mechanical properties and morphology of polyethylene-polypropylene blends with controlled thermal history
  202. Polypropylene–polyethylene blend morphology controlled by time–temperature–miscibility
  203. Dynamic rheology of branched poly(ethylene terephthalate)
  204. Dynamic rheology of branched poly(ethylene terephthalate)
  205. Crystallization of low-density polyethylene- and linear low-density polyethylene-rich blends
  206. Crystallization and compatibilization of polypropylene-liquid crystalline polyester blends
  207. Shear rheology and thermal properties of linear and branched poly(ethylene terephthalate) blends
  208. Molecular simulation of thermophysical properties of aromatic polymers containing oxetane ring in the main chain
  209. Polymorphism and polymorphic transformation of photographic coupler
  210. Molecular simulation of aromatic polyesters containing oxetane rings in the main chain
  211. Brittle-Ductile Transition of PP/Rubber/Filler Hybrids
  212. Miscibility and Co-Continuous Morphology of Polypropylene-Polyethylene Blends
  213. Nucleating agents for thermoplastics
  214. The effect of temperature on the viscoelastic properties of model and industrial dispersions
  215. Synthesis and Characterisation of Branched Poly(ethylene terephthalate)
  216. Liquid crystalline polymers: molecular simulation of some polyethers containing oxetanic rings in the main chain
  217. PP/elastomer/filler hybrids. II. Morphologies and fracture
  218. PP/elastomer/filler hybrids. II. Morphologies and fracture
  219. PP-elastomer-filler hybrids. I. Processing, microstructure, and mechanical properties
  220. Swelling and Mechanical Properties of Crosslinked Hydrogels Containing N-Vinylpyrrolidone
  221. Swelling and Mechanical Properties of Crosslinked Hydrogels Containing N-Vinylpyrrolidone
  222. Evaluation of recycled PP/rubber/talc hybrids
  223. Network characteristics of homopolymer and some copolymers of poly(2-hydroxyethyl methacrylate)
  224. Synthesis and rheological properties of soluble poly(hydroxyethyl methacrylate) and some copolymers
  225. Kinetics of polymer crystallisation
  226. The crystallization kinetics of filled poly(ethylene terephthalate)
  227. Thermal properties of nanocrystalline and amorphous FeB alloys made by mechanical alloying
  228. Formation of titanium silicides by mechanical alloying
  229. APPLICATION OF GaAs, GaSb AND InSb FOR PRESSURE SENSOR DESIGN
  230. Re-amorphization of crystallized metallic glass Co70.3Fe4.7Si15B10 ribbons by mechanical alloying
  231. Thermal Ageing of Filled Polymers
  232. Differential Scanning Calorimetry of Stressed Polymers
  233. Effect of monomer composition on the adhesion of pressure-sensitive adhesives prepared by photoinitiated polymerization
  234. Ultra-violet initiated polymerisation for the preparation of pressure sensitive adhesives
  235. The Influence of Filler Particles on the Mobility of Polymer Molecules
  236. Factors Affecting the Ultraviolet-Initiated Polymerization of Vinyl Monomers
  237. The influence of filler particles and polymer structure on the mobility of polymer molecules
  238. Influence of filler particles on the mobility of polymer molecules. II. Effect of filler type
  239. Influence of sample thickness on ultra-violet initiated polymerisation
  240. Redox initiation of polymerization using 1,3-dioxane-2-hydroperoxides
  241. Redox-Initiated Grafting of Acrylic Monomers onto Poly(vinyl Alcohol)
  242. A Study of Sensitizer Systems for Photoinitiated Polymerization
  243. Hydrogen peroxide oxidation of poly(vinyl alcohol)
  244. Polypropylene Natural Cellulosic Fiber Composites
  245. Miscibility, Morphology, and Properties of Polyethylene Blends
  246. Fire-Retardant Properties Of Polymer Nanocomposites
  247. Specialty Rubber Nanocomposites
  248. Thermal Characterization Of Nanocomposites