All Stories

  1. Rheological and tribological properties of waste cooking oil-derived bio-lubricants through multiple chemical routes

    Article • Biomass and Bioenergy, January 2027, Elsevier

    Enrico Ciulli

  2. Influence of Assembly on the Performance of a Tilting Pad Journal Bearing and Comparison with Predictions

    Article • September 2026, Springer Science + Business Media

    Enrico Ciulli

  3. Enhancing Fastening of Threaded Joints With Sustainable Lubricants From Waste Cooking Oil

    Article • Journal of Tribology, September 2026, Wiley

    Enrico Ciulli

  4. Coating materials for journal bearings

    Article • Tribology International, July 2026, Elsevier

    Enrico Ciulli

  5. Computer-Aided Development and Experimental Testing of a Multi-Sensor System for a Tilting Pad Journal Bearing

    Article • Lubricants, March 2026, MDPI AG

    Enrico Ciulli

  6. An extension of Hertz’s formula for the stiffness of conformal spherical contacts

    Article • Friction, January 2026, Tsinghua University Press

    Enrico Ciulli

  7. Sensitivity Analysis of a Statistical Method for the Dynamic Coefficients Computations of a Tilting Pad Journal Bearing

    Article • Machines, August 2025, MDPI AG

    Enrico Ciulli

  8. Characterization of rolling bearing rotation and local defects exploiting their magnetic remanence

    Article • Measurement, January 2025, Elsevier

    Enrico Ciulli

  9. Contact Pressure Evolution in Classic Pin-on-Disc Tests

    Article • January 2025, Springer Science + Business Media

    Enrico Ciulli

  10. Investigation of Thermal Influences on Wear Behavior in Geared Transmissions

    Article • September 2024, SAE International

    Enrico Ciulli

  11. Vastness of Tribology Research Fields and Their Contribution to Sustainable Development

    Article • Lubricants, January 2024, MDPI AG

    Enrico Ciulli

  12. Proceedings of ITS-IFToMM 2024

    Article • January 2024, Springer Science + Business Media

    Professor Alessandro Ruggiero, Enrico Ciulli

  13. Pin-on-Disk Wear Investigation on Bronze Coating – Part 1: Definition of the Test Methodology

    Article • January 2024, Springer Science + Business Media

    Enrico Ciulli

  14. Pin-on-Disk Wear Investigation on Bronze Coating – Part 2: Analysis of the Experimental Results

    Article • January 2024, Springer Science + Business Media

    Enrico Ciulli

  15. Comparison Between Numerical and Experimental Static Performance and Sensitivity Study on a Tilting Pad Journal Bearing in a Load on Pad Configuration

    Article • January 2024, Springer Science + Business Media

    Enrico Ciulli

  16. A Statistical Method to Compute the Dynamic Coefficients of a Tilting Pad Journal Bearing

    Article • January 2024, Springer Science + Business Media

    Enrico Ciulli

  17. Pivot Rolling Motion Effect in Rocker Back Tilting Pad Journal Bearings: First Comparison Between Experiment and Simulation

    Article • November 2023, Springer Science + Business Media

    Enrico Ciulli

  18. Exploration of trade-offs between NVH and efficiency in bevel gear design

    Article • Forschung im Ingenieurwesen, August 2023, Springer Science + Business Media

    Enrico Ciulli

  19. Investigation on Pivot Rolling Motion Effect on the Behavior of Rocker Back Tilting Pad Journal Bearings

    Article • Applied Sciences, April 2023, MDPI AG

    Enrico Ciulli

  20. Friction Models for a Sustainable Design: Friction Coefficient in Lubricated Conformal Pairs

    Article • January 2023, Springer Science + Business Media

    Enrico Ciulli

  21. The Applicability of the Hertzian Formulas to Point Contacts of Spheres and Spherical Caps

    Article • Lubricants, September 2022, MDPI AG

    Enrico Ciulli

  22. Friction-Induced Efficiency Losses and Wear Evolution in Hypoid Gears

    Article • Machines, August 2022, MDPI AG

    Enrico Ciulli

  23. Turbulence Effects in Tilting Pad Journal Bearings: A Review

    Article • Lubricants, July 2022, MDPI AG

    Enrico Ciulli

  24. Tilting Pad Journal Bearing Ball and Socket Pivots: Experimental Determination of Stiffness

    Article • Machines, January 2022, MDPI AG

    Enrico Ciulli

  25. Tribology Within AIMETA

    Article • January 2022, Springer Science + Business Media

    Enrico Ciulli

  26. A Model for the Prediction of Frictional Power Losses in Hypoid Gears

    Article • January 2022, Springer Science + Business Media

    Enrico Ciulli

  27. Combination of musculoskeletal and wear models to investigate the effect of daily living activities on wear of hip prostheses

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, November 2021, SAGE Publications

    Enrico Ciulli

  28. Experimental Characterization of Large Turbomachinery Tilting Pad Journal Bearings

    Article • Machines, November 2021, MDPI AG

    Enrico Ciulli

  29. Tribology and Sustainable Development Goals

    Article • October 2021, Springer Science + Business Media

    Enrico Ciulli

  30. Contact Force Measurements in Cam and Follower Lubricated Contacts

    Article • Frontiers in Mechanical Engineering, November 2020, Frontiers

    Enrico Ciulli

  31. Dynamic Identification of 280mm Diameter Tilting Pad Journal Bearings: Test Results and Measurement Uncertainties Assessment of Different Designs

    Article • September 2020, ASME International

    Enrico Ciulli

  32. A Simple Modular Test Rig for Measuring Static and Dynamic Friction

    Article • August 2020, Springer Science + Business Media

    Enrico Ciulli

  33. Experimental investigation on wear map evolution of ceramic-on-UHMWPE hip prosthesis

    Article • Tribology International, March 2020, Elsevier

    Enrico Ciulli

  34. Tribology and Industry: From the Origins to 4.0

    Article • Frontiers in Mechanical Engineering, September 2019, Frontiers

    Enrico Ciulli

  35. Nonlinear Response of Tilting Pad Journal Bearings to Harmonic Excitation

    Article • Machines, June 2019, MDPI AG

    Enrico Ciulli

  36. Film Thickness and Shape Evaluation in a Cam-Follower Line Contact with Digital Image Processing

    Article • Lubricants, March 2019, MDPI AG

    Enrico Ciulli

  37. Error analysis in the determination of the dynamic coefficients of tilting pad journal bearings

    Article • Procedia Structural Integrity, January 2019, Elsevier

    Enrico Ciulli

  38. Experimental aspects of a cam-follower contact

    Article • January 2019, Springer Science + Business Media

    Enrico Ciulli

  39. Experimental tests on large size tiltingpad journal bearings for turbomachinery

    Article • Proccedings of International Scientific Conference "BALTTRIB 2019", January 2019, Vytautas Magnus University

    Enrico Ciulli

  40. Advances in Italian Mechanism Science

    Article • January 2019, Springer Science + Business Media

    Enrico Ciulli

  41. Set-up of a novel test plant for high power turbomachinery tilting pad journal bearings

    Article • Tribology International, November 2018, Elsevier

    Enrico Ciulli

  42. Nonlinear Effects in the Dynamic Characterization of Tilting Pad Journal Bearings

    Article • October 2018, Springer Science + Business Media

    Enrico Ciulli

  43. Experimental rigs for testing tilting pad journal bearings, gears and complete gearboxes

    Article • Friction, April 2018, Tsinghua University Press

    Enrico Ciulli

  44. First Results Obtained on a Novel Test Bench for Tilting Pad Journal Bearings

    Article • Lubricants, January 2018, MDPI AG

    Enrico Ciulli

  45. Commissioning of a Novel Test Apparatus for the Identification of the Dynamic Coefficients of Large Tilting Pad Journal Bearings

    Article • Procedia Structural Integrity, January 2018, Elsevier

    Enrico Ciulli

  46. Vibration Testing Procedures for Bone Stiffness Assessment in Fractures Treated with External Fixation

    Article • Annals of Biomedical Engineering, December 2016, Springer Science + Business Media

    Enrico Ciulli

  47. Prediction model for tilting pad journal bearings based on a general-purpose CFD software.

    Article • November 2016, Springer Science + Business Media

    Enrico Ciulli

  48. A novel test rig for the dynamic characterization of large size tilting pad journal bearings

    Article • Journal of Physics Conference Series, September 2016, Institute of Physics Publishing

    Enrico Ciulli

  49. Effect of size and dimensional tolerance of reverse total shoulder arthroplasty on wear: An in-silico study

    Article • Journal of the Mechanical Behavior of Biomedical Materials, August 2016, Elsevier

    Enrico Ciulli

  50. Numerical and experimental investigations for the evaluation of the wear coefficient of reverse total shoulder prostheses

    Article • Journal of the Mechanical Behavior of Biomedical Materials, March 2016, Elsevier

    Enrico Ciulli

  51. Theoretical and Experimental Investigation on Friction in Lubricated Line Contacts with Different Materials and Textures in Presence of Wear

    Article • Key Engineering Materials, February 2016, Trans Tech Publications

    Enrico Ciulli, Francesca Di Puccio

  52. Tribological Behaviour of Ceramic Hip Replacements

    Article • Advances in Science and Technology, October 2014, Trans Tech Publications

    Enrico Ciulli

  53. A New Methodology for the Experimental Study of Scuffing on Gears for Advanced Applications

    Article • July 2014, ASME International

    Enrico Ciulli

  54. Experimental study on circular eccentric cam–follower pairs

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, April 2014, SAGE Publications

    Enrico Ciulli

  55. A comparative study of wear laws for soft-on-hard hip implants using a mathematical wear model

    Article • Tribology International, July 2013, Elsevier

    Enrico Ciulli

  56. Thermal effects of different kind influencing lubricated non-conformal contacts

    Article • Tribology International, March 2013, Elsevier

    Enrico Ciulli

  57. PERMANENT MAGNET BEARINGS: ANALYSIS OF PLANE AND AXISYMMETRIC V-SHAPED ELEMENT DESIGN

    Article • Progress In Electromagnetics Research M, January 2012, EMW Publishing

    Enrico Ciulli

  58. Discussion

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, June 2011, SAGE Publications

    Professor Andreas Almqvist, Enrico Ciulli

  59. Investigation on cam–follower lubricated contacts

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, June 2011, SAGE Publications

    Enrico Ciulli

  60. Lubrication and wear modelling of artificial hip joints: A review

    Article • Tribology International, May 2011, Elsevier

    Enrico Ciulli

  61. Special issue on asperity contacts and lubrication aspects

    Article • Meccanica, February 2011, Springer Science + Business Media

    Enrico Ciulli

  62. Tribology research trends in Italy

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, May 2009, SAGE Publications

    Enrico Ciulli

  63. The influence of the slide-to-roll ratio on the friction coefficient and film thickness of EHD point contacts under steady state and transient conditions

    Article • Tribology International, April 2009, Elsevier

    Enrico Ciulli

  64. Thermal point contact EHL analysis of rolling/sliding contacts with experimental comparison showing anomalous film shapes

    Article • Tribology International, April 2009, Elsevier

    Enrico Ciulli

  65. Non-steady state non-conformal contacts: friction and film thickness studies

    Article • Meccanica, October 2008, Springer Science + Business Media

    Enrico Ciulli

  66. Rough contacts between actual engineering surfaces

    Article • Wear, May 2008, Elsevier

    Professor Luis A Ferreira, Enrico Ciulli

  67. Rough contacts between actual engineering surfaces

    Article • Wear, May 2008, Elsevier

    Professor Luis A Ferreira, Enrico Ciulli

  68. Film Thickness Analysis for EHL Contacts under Steady-State and Transient Conditions by Automatic Digital Image Processing

    Article • Advances in Tribology, January 2008, Hindawi Publishing Corporation

    Enrico Ciulli

  69. Experimental investigation of transient and thermal effects on lubricated non‐conformal contacts

    Article • Tribotest, October 2007, Wiley

    Enrico Ciulli

  70. Investigation on load-dependent roughness variations

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, March 2007, SAGE Publications

    Enrico Ciulli

  71. Hydrostatic lubrication with cryogenic fluids

    Article • Tribology International, August 2006, Elsevier

    Enrico Ciulli

  72. Comparison of two sealing coupling geometries for a direct fuel injector

    Article • Tribology International, August 2006, Elsevier

    Enrico Ciulli

  73. Influence of vibrations and noise on experimental results of lubricated non-conformal contacts

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, March 2006, SAGE Publications

    Enrico Ciulli

  74. Experimental Study on Wear and Fracture in Aeronautical Gear Transmissions

    Article • January 2006, ASME International

    Enrico Ciulli

  75. Formulas for Entraining Velocity in Lubricated Line Contacts

    Article • Journal of Tribology, January 2002, ASME International

    Enrico Ciulli

  76. Article • Meccanica, January 2001, Springer Science + Business Media

    Enrico Ciulli

  77. Numerical and Experimental Study of Friction on a Single Cylinder CFR Engine

    Article • February 1996, SAE International

    Enrico Ciulli

  78. Pneumatic stability of the integral aerostatic bearing: comparison with other types of bearing

    Article • Tribology International, December 1989, Elsevier

    Enrico Ciulli

  79. Static behaviour of an integral externally pressurized gas bearing — comparison with other types of bearing

    Article • Tribology International, June 1989, Elsevier

    Enrico Ciulli

  80. Investigation on Thermal Distress and Scuffing Failure Under Micro EHL Conditions

    Article • Springer Science + Business Media

    Enrico Ciulli