All Stories

  1. Electrochemical impedance spectroscopy to characterise plain and fibre-reinforced cementitious mixes.
  2. Effect of static and dynamic tensile stress changes on carbon steel passivation in alkaline environment
  3. High-frequency impedance measurements on cement paste loaded with steel fibres
  4. Preparation and characterization of phosphate coatings developed on 316 L by a cathodic treatment
  5. Mechanical, microstructural and electrical characterization of Portland cement mortars with foundry slags as sand replacement
  6. Corrosion protection of carbon steel by water-borne resin modified by reduced-graphene oxide
  7. Investigation of the electrochemical behaviour of Fe-28Mn-6Si-5Cr shape memory alloy in alkaline media
  8. Electrochemical synthesis and carbon doping of nanostructured iron fluorides from the selection of metal current collectors in lithium-ion batteries
  9. Zn-phosphate conversion coatings developed on high-strength steels at reduced processing temperature
  10. Effect of substrate microstructure on corrosion resistance of cast and forged anodised 6082 Al alloy
  11. On the preparation of multifunctional conversion coatings of FePO4/LiFePO4
  12. A comprehensive structural and electrochemical study on the performance of Mn-phosphate layers
  13. Effect of Stress on the Critical Chloride Content of Steel Bar in Simulated Concrete Pore Solution
  14. The use of smart coatings for metal corrosion control
  15. A combined experimental and theoretical approach effect of Curcuma. L extract as a corrosion inhibitor on iron in acidic solution
  16. Influence of pH and temperature in the performance of Zn phosphate conversion coatings
  17. Influence of the temperature on the reduction mechanism of concentrated nitric acid on a silicon-enriched austenitic stainless steel
  18. Electrochemical characterization of a Fe-based shape memory alloy in an alkaline medium and the behaviour in aggressive conditions
  19. Two- and Four-Electrode Configurations for Contactless Reinforced Concrete Corrosion Monitoring
  20. Electrochemical Impedance Spectroscropy Study on the Behavior of Reinforced Concrete Elements under Loading
  21. Corrosion resistance of a water-borne resin doped with graphene derivatives applied on galvanized steel
  22. Synergistic Interaction of Clusters of Iron Oxide Nanoparticles and Reduced Graphene Oxide for High Supercapacitor Performance
  23. Characterisation of Commercial Li‐Ion Batteries Using Electrochemical Impedance Spectroscopy
  24. Influence of Graphene Oxide Additions on the Corrosion Resistance of a Rust Converter Primer
  25. Effect of Laser Speed and Hatch Spacing on the Corrosion Behavior of 316L Stainless Steel Produced by Selective Laser Melting
  26. Conductivity assessment of multifunctional cement pastes by impedance spectroscopy
  27. Electrochemical Characterization and Modeling of Fe-28Mn-6Si-5Cr Shape Memory Steel in Alkaline Medium
  28. Characterization of Zinc Phosphate Coatings: Influence of pH and Temperature on Morphology and Corrosion Resistance
  29. Corrosion inhibition of iron in chloride media by the aqueous extract of Curcuma longa rhizome powder
  30. Laser‐Guided Corrosion Control: A New Approach to Tailor the Degradation of Mg‐Alloys
  31. Characterization of Phosphate Coatings: Influence of the Acid Pickling Conditions
  32. Corrosion protection properties of anodized AA2024T3 alloy sealing with organic-based species
  33. Analysis of the microstructure of carbon fibre reinforced cement pastes by impedance spectroscopy
  34. The corrosion protection afforded by a commercial rust converter doped with graphene oxide
  35. The effect of chlorides on the corrosion behaviour of weathered reinforcing bars
  36. Corrosion inhibition of steel by Prickly Pear: extraction, characterization and electrochemical studies
  37. Effect of nano-ZnO on mechanical and thermal properties of geopolymer
  38. Enhanced Corrosion Resistance of Recycled Aluminum Alloy 6061 Chips Using Hot Extrusion Followed by ECAP
  39. Electrochemical study of the surface metal matrix composite developed on AA 2024-T351 by the friction stir process
  40. The Effect of Loading on the Diffusivity of Chlorides in Mortar
  41. Development of conversion coatings on iron via corrosion in LiPF6 solution
  42. Inhibition of Carbon Steel Corrosion in Neutral Calcareous Synthetic Water by Eruca sativa Extract
  43. Hydrophobic surface treatments for improving the corrosion resistance of anodized AA2024-T3 alloys
  44. Evolution of corrosion behavior for AA7075 aluminum alloy implanted with nitrogen
  45. New Double Electrode System for the Electrochemical Desalination of Building Stones
  46. The effect of Zn2+ ions on the corrosion behavior of tinplate immersed in food-simulating solutions
  47. The effect of long-term atmospheric aging and temperature on the electrochemical behaviour of steel rebars in mortar
  48. Enhancing the efficiency of electrochemical desalination of stones: a proton pump approach
  49. EIS study of epoxy resin applied on carbon steel using double-cylinder electrolyte cell
  50. Electrokinetic treatment to increase bearing capacity and durability of a granite
  51. Electrochemical Impedance Spectroscopy (EIS 2016) Foreword
  52. In situ desalination of a granitic column by the electrokinetic method
  53. An improved electrokinetic method to consolidate porous materials
  54. An interfacial adhesive analysis of repairing composite patches by electrochemical impedance spectroscopy
  55. Light controlled resistive switching and photovoltaic effects in ferroelectric 0.5Ba(Zr 0.2 Ti 0.8 )O 3 -0.5(Ba 0.7 Ca 0.3 )TiO 3 thin films
  56. Electro-Chemical Impedance Spectral (EIS) Study of Patinated Bronze Corrosion in Sulfate Media: Experimental Design Approach
  57. Inhibition effect of some trees cultivated in arid regions against the corrosion of steel reinforcement in alkaline chloride solution
  58. Electrokinetic desalination of protruded areas of stone avoiding the direct contact with electrodes
  59. (Invited) An Impedance Study of the Factors Affecting the Passivity of Steel in Concrete
  60. Corrosion of electrodeposited Sn in 0.01 M NaCl solution. A EQCM and EIS study
  61. Effect of carbon on the corrosion and wear performance of Zn-phosphate layers
  62. Thermogalvanic Currents in Steel Reinforced Concrete
  63. Electrochemical aspects of the steel‐concrete system. A review
  64. Electrodeposition of tin from a sulphate bath. An EQCM study
  65. Chloride and CO2 transport in cement paste containing red mud
  66. Optimization of conversion coatings based on zinc phosphate on high strength steels, with enhanced barrier properties
  67. Electrochemical behavior of organic/inorganic films applied on tinplate in different aggressive media
  68. Characterization of adsorbates by transient measurements in Scanning Electrochemical Microscopy
  69. The anticorrosive properties of sol-gel films doped with hydrotalcite nanoparticles applied on tinplate
  70. The electrochemical behaviour of steel rebars in concrete: an Electrochemical Impedance Spectroscopy study of the effect of temperature
  71. Macro and micro aspects of the transport of chlorides in cementitious membranes
  72. The role of Mg2+ ions in the corrosion behaviour of AA2024-T3 aluminium alloys immersed in chloride-containing environments
  73. Electrolyte Uptake Kinetics in Doped and Undoped sol-gel Films Using a High Resolution EQCM Oscillator Sensor
  74. On the growth of nanostructured iron hydroxy-fluorides for Li-ion batteries
  75. Granite desalination using electromigration. Influence of type of granite and saline contaminant
  76. Chloride transport through cementitious membranes using pulsed current
  77. Effect of inhibitors on the corrosion of galvanized steel and on mortar properties
  78. Oxide Film Growth by CSV on AISI 316L: a Combined Electrochemical and Analytical Characterization
  79. The corrosion potential of stainless steel rebars in concrete: Temperature effect
  80. Corrosion protection performance of sol–gel coatings doped with red mud applied on AA2024-T3
  81. Current distribution in double-cylinder electrolyte cells: Application to the study of corrosion properties of organic coatings
  82. Impedance based method for non-contact determination of the corrosion rate in buried metallic structures
  83. Effect of the addition of thermally activated hydrotalcite on the protective features of sol–gel coatings applied on AA2024 aluminium alloys
  84. Electrochemical Impedance Spectroscopy as a tool for materials selection: Water for haemodialysis
  85. Alternating-Current Measurements in Scanning Electrochemical Microscopy, Part 1: Principle and Theory
  86. Alternating Current Measurements in Scanning Electrochemical Microscopy, Part 2: Detection of Adsorbates
  87. Electrochemical Mass Transfer Measurements of CO2 in MDEA Solutions
  88. Ingress of water into organic coatings: Real-time monitoring of the capacitance and increase in mass
  89. Resistivity of cementitious materials measured in diaphragm migration cells: The effect of the experimental set-up
  90. The electrochemical behaviour of sol–gel hybrid coatings applied on AA2024-T3 alloy: Effect of the metallic surface treatment
  91. The corrosion protection mechanism of rust converters: An electrochemical impedance spectroscopy study
  92. Characterization of hybrid sol–gel coatings doped with hydrotalcite-like compounds to improve corrosion resistance of AA2024-T3 alloys
  93. Surface modification of 2017-T4 aluminium alloy by high power diode laser melting
  94. Water uptake kinetics in anti-corrosion organic films with a high resolution microbalance oscillator sensor
  95. Corrosion Protective Properties of Hydrotalcites Doped Hybrid Sol-Gel Coatings on Aluminium Substrates
  96. Influence of Surface Finishing on Corrosion Behaviour of Mg-Al Hydrotalcite Doped Hybrid Sol-Gel Coatings on Al Alloy in Saline Environment
  97. Electrochemical behaviour of high strength steel wires in the presence of chlorides
  98. The concept of floating electrode for contact-less electrochemical measurements: Application to reinforcing steel-bar corrosion in concrete
  99. Experimental confirmation of some aspects of the microstructural model of the impedance spectra of porous materials
  100. Microstructure of the Passive Layer Formed on Different Austenitic Stainless Steels Implanted with Molybdenum
  101. Quartz crystal oscillator sensor for QCM monitoring of water absorption in anticorrosion cataphoretic paintings
  102. Study of passive films formed on mild steel in alkaline media by the application of anodic potentials
  103. Estudio comparativo del comportamiento electroquímico del hierro en medio alcalino en presencia de lodos rojos y lodos grises. Efecto del Al3+
  104. Monitoring of water uptake in anti-corrosion organic coatings using a quartz crystal oscillator sensor
  105. On the corrosion mechanism of AISI 204Cu stainless steel in chlorinated alkaline media
  106. EIS study of the rust converter effectiveness under different conditions
  107. Effect of the experimental setup in the behaviour of sol–gel coatings
  108. Impedance spectroscopy study of saturated mortar samples
  109. Electrochemical behaviour of an AISI 304L stainless steel implanted with nitrogen
  110. Microstructural modifications in Portland cement concrete due to forced ionic migration tests. Study by impedance spectroscopy
  111. Microstructural changes in a cementitious membrane due to the application of a DC electric field
  112. Effect of chromium and nitrogen co-implantation on the characteristics of the passive layer developed on austenitic and duplex stainless steels
  113. Microstructure of the passive layer formed on AA2024-T3 aluminum alloy surface implanted with nitrogen
  114. Local mass transfer measurements in a bubble column using an electrochemical technique
  115. Surface treatment of carbon steel substrates to prevent cathodic delamination
  116. On the possibility of using embedded electrodes for the measurement of dielectric properties in organic coatings
  117. Use of impedance spectroscopy to determine the displacement of water in cement paste under small loads
  118. Influence of galvanised surface state on the duplex systems behaviour
  119. The corrosion of nickel?titanium rotary endodontic instruments in sodium hypochlorite
  120. Characterization of Waterproofness in Ready-to-Wear Professional Garments
  121. The effect of Ni in the electrochemical properties of oxide layers grown on stainless steels
  122. Study of the chloride diffusion in mortar: A new method of determining diffusion coefficients based on impedance measurements
  123. An insight on the role of Nickel in the passive films generated on different stainless steels
  124. Effect of surface preparation on the evolution of the passive films formed on AISI 304L
  125. Impedance spectroscopy to characterize the pore structure during the hardening process of Portland cement paste
  126. Long-term behaviour of AISI 304L passive layer in chloride containing medium
  127. Modifications in the electrochemical behaviour of SAF 2205 in alkaline media induced by Cl– ions
  128. The effect of Al3+ in the passivity of iron in alkaline media containing chlorides
  129. The effect of the Cerium ion implantation in the passive films properties of a duplex stainless steel
  130. XPS study of passive films generated on AISI 430 ferritic stainless steel implanted with nitrogen and chromium plus nitrogen
  131. Evaluation of red mud as surface treatment for carbon steel prior painting
  132. High frequency impedance spectroscopy study of passive films formed on AISI 316 stainless steel in alkaline medium
  133. Comparative study of passive films of different stainless steels developed on alkaline medium
  134. Influence of chromium and cerium implantation in the electrochemical development of passive layers on AISI 304L
  135. Passivity of iron in red mud’s water solutions
  136. Electrical effects generated by mechanical loading of hardened Portland cement paste
  137. Characterisation of barrier properties of organic paints: the zinc phosphate effectiveness
  138. Modifications of the stainless steels passive film induced by cerium implantation
  139. Impedance spectroscopy study of hardened Portland cement paste
  140. Characterisation of the electrochemical behaviour of cerium implanted stainless steels
  141. Galvanic coupling between carbon steel and austenitic stainless steel in alkaline media
  142. Influence of lanthanum oxide as quality promoter on cathodes for MCFC
  143. Comparative study between galvanised steel and three duplex systems submitted to a weathering cyclic test
  144. Use of EIS, ring-disk electrode, EQCM and Raman spectroscopy to study the film of oxides formed on iron in 1 M NaOH
  145. Study of a Li–Ni oxide mixture as a novel cathode for molten carbonate fuel cells
  146. Electrochemical behaviour of steel rebars in concrete: influence of environmental factors and cement chemistry
  147. Electrochemical Impedance Spectroscopy Study of the Corrosion Process on Coated Galvanized Steel in a Salt Spray Fog Chamber
  148. Characterisation of the barrier properties of different paint systems
  149. A New Approach to the Determination of the Cathodic Protection Period in Zinc-Rich Paints
  150. Cement paste hardening process studied by impedance spectroscopy
  151. Corrosion behaviour of cermet coatings in artificial seawater
  152. Influencia de distintos medios agresivos en la acción protectora de las pinturas ricas en zinc
  153. Characterisation of the barrier properties of different paint systems
  154. Characterization of porous aluminium oxide films from a.c. impedance measurements
  155. Effect of protective oxide scales in the macrogalvanic behaviour of concrete reinforcements
  156. Influence of Ageing and Concrete Humidity in the Properties of Rebar Oxides Layer and Macrocell Activity
  157. Study of the Dielectric Characteristics of Cement Paste
  158. Estudio de la entrada de agua en pinturas de base agua: Comparación entre pintura aplicada y libre
  159. Impedance measurements on cement paste
  160. Electrochemical behaviour of zinc-rich epoxy paints in 3% NaCl solution
  161. Time resolved rrde applied to pitting of FeCr alloy and 304 stainless steel
  162. The importance of geometrical considerations in the measurement of steel corrosion in concrete by means of AC impedance
  163. Advances in Electrochemical Impedance Measurements in Reinforced Concrete
  164. Galvanic Corrosion of Steel in Concrete
  165. Passivation of Reinforcing Steel in Concrete
  166. Time Resolved RRDE Applied to Pitting of Fe-Cr Alloy and 304 Stainless Steel
  167. An equivalent electrical circuit of macrocell activity in facing electrodes embedded in cement mortar
  168. Frequency and Time Resolved Measurements at Rotating Ring‐Disk Electrodes for Studying Localized Corrosion
  169. Intergranular corrosion susceptibility of austenitic–ferritic duplex stainless steels: application of potentiokinetic reactivation tests
  170. Electrochemical Impedance Spectroscopy and Zero Resistance Ammeters (ZRA) as Tools for Studying the Behaviour of Zinc-Rich Inorganic Coatings
  171. Influence of pollutants (nitrate anions) on the corrosivity of sea water
  172. Corrosivity of the N.W. Spanish sea water