All Stories

  1. EIS study of the development of passive layers on Ferrous shape memory alloys in alkaline conditions
  2. Electrochemical Characterisation and Galvanic Coupling Behaviour of Carbon Steel and Shape Memory Steel
  3. Mechanical, microstructural and electrical characterization of Portland cement mortars with foundry slags as sand replacement
  4. Thermal Characterization and Heat Capacities of Seven Polyphenols
  5. Zn-phosphate conversion coatings developed on high-strength steels at reduced processing temperature
  6. (Invited) High-Frequency Impedance Measurements on Cement Paste Loaded with Steel Fibres
  7. The use of smart coatings for metal corrosion control
  8. Electrochemical characterization of a Fe-based shape memory alloy in an alkaline medium and the behaviour in aggressive conditions
  9. Two- and Four-Electrode Configurations for Contactless Reinforced Concrete Corrosion Monitoring
  10. Electrochemical Impedance Spectroscropy Study on the Behavior of Reinforced Concrete Elements under Loading
  11. Corrosion resistance of a water-borne resin doped with graphene derivatives applied on galvanized steel
  12. Influence of Graphene Oxide Additions on the Corrosion Resistance of a Rust Converter Primer
  13. Effect of Laser Speed and Hatch Spacing on the Corrosion Behavior of 316L Stainless Steel Produced by Selective Laser Melting
  14. Conductivity assessment of multifunctional cement pastes by impedance spectroscopy
  15. Electrochemical Characterization and Modeling of Fe-28Mn-6Si-5Cr Shape Memory Steel in Alkaline Medium
  16. Microstructure and Thermomechanical Characterization of Fe-28Mn-6Si-5Cr Shape Memory Alloy
  17. Characterization of Phosphate Coatings: Influence of the Acid Pickling Conditions
  18. Corrosion protection properties of anodized AA2024T3 alloy sealing with organic-based species
  19. Analysis of the microstructure of carbon fibre reinforced cement pastes by impedance spectroscopy
  20. The corrosion protection afforded by a commercial rust converter doped with graphene oxide
  21. The Effect of Loading on the Diffusivity of Chlorides in Mortar
  22. Hydrophobic surface treatments for improving the corrosion resistance of anodized AA2024-T3 alloys
  23. The effect of Zn2+ ions on the corrosion behavior of tinplate immersed in food-simulating solutions
  24. EIS study of epoxy resin applied on carbon steel using double-cylinder electrolyte cell
  25. Electrochemical Impedance Spectroscopy (EIS 2016) Foreword
  26. Structural characterization and barrier properties of hybrid sol-gel films applied on tinplate
  27. An interfacial adhesive analysis of repairing composite patches by electrochemical impedance spectroscopy
  28. Assessment of ZnO nanoparticles as anticorrosive pigment in hybrid sol–gel films
  29. Corrosion of electrodeposited Sn in 0.01 M NaCl solution. A EQCM and EIS study
  30. Thermogalvanic Currents in Steel Reinforced Concrete
  31. Electrodeposition of tin from a sulphate bath. An EQCM study
  32. Electrochemical behavior of organic/inorganic films applied on tinplate in different aggressive media
  33. The anticorrosive properties of sol-gel films doped with hydrotalcite nanoparticles applied on tinplate
  34. The role of Mg2+ ions in the corrosion behaviour of AA2024-T3 aluminium alloys immersed in chloride-containing environments
  35. Characterisation and comparison of biomass ashes with different thermal histories using TG-DSC
  36. Electrolyte Uptake Kinetics in Doped and Undoped sol-gel Films Using a High Resolution EQCM Oscillator Sensor
  37. The use of sol–gel film as pre-treatment for tinplate used in the canning industry
  38. Characterization of Hybrid Sol-gel Coatings Applied over Tinplate
  39. Corrosion protection performance of sol–gel coatings doped with red mud applied on AA2024-T3
  40. Current distribution in double-cylinder electrolyte cells: Application to the study of corrosion properties of organic coatings
  41. Characterization of hybrid sol-gel films doped with red mud particles
  42. Effect of the addition of thermally activated hydrotalcite on the protective features of sol–gel coatings applied on AA2024 aluminium alloys
  43. Ingress of water into organic coatings: Real-time monitoring of the capacitance and increase in mass
  44. The electrochemical behaviour of sol–gel hybrid coatings applied on AA2024-T3 alloy: Effect of the metallic surface treatment
  45. The corrosion protection mechanism of rust converters: An electrochemical impedance spectroscopy study
  46. Characterization of hybrid sol–gel coatings doped with hydrotalcite-like compounds to improve corrosion resistance of AA2024-T3 alloys
  47. Water uptake kinetics in anti-corrosion organic films with a high resolution microbalance oscillator sensor
  48. Characterization of hybrid sol–gel coatings doped with hydrotalcite-like compounds to improve corrosion resistance of AA2024-T3 alloys
  49. Structural transformation of silane-based zirconium-modified sol-gel coatings
  50. Corrosion Protective Properties of Hydrotalcites Doped Hybrid Sol-Gel Coatings on Aluminium Substrates
  51. Influence of Surface Finishing on Corrosion Behaviour of Mg-Al Hydrotalcite Doped Hybrid Sol-Gel Coatings on Al Alloy in Saline Environment
  52. Quartz crystal oscillator sensor for QCM monitoring of water absorption in anticorrosion cataphoretic paintings
  53. Monitoring of water uptake in anti-corrosion organic coatings using a quartz crystal oscillator sensor
  54. EIS study of the rust converter effectiveness under different conditions
  55. Effect of the experimental setup in the behaviour of sol–gel coatings
  56. Workshop on Application of Electrochemical Techniques to Organic Coating, AETOC’07, Baiona, Spain, 18–21 April 2007
  57. Surface treatment of carbon steel substrates to prevent cathodic delamination
  58. On the possibility of using embedded electrodes for the measurement of dielectric properties in organic coatings
  59. Influence of galvanised surface state on the duplex systems behaviour
  60. Evaluation of red mud as surface treatment for carbon steel prior painting
  61. Evaluation of environmentally friendly paints over weathering galvanised steel
  62. Characterisation of barrier properties of organic paints: the zinc phosphate effectiveness
  63. Comparative study between galvanised steel and three duplex systems submitted to a weathering cyclic test
  64. Electrochemical Impedance Spectroscopy Study of the Corrosion Process on Coated Galvanized Steel in a Salt Spray Fog Chamber
  65. Characterisation of the barrier properties of different paint systems
  66. A New Approach to the Determination of the Cathodic Protection Period in Zinc-Rich Paints
  67. Influencia de distintos medios agresivos en la acción protectora de las pinturas ricas en zinc
  68. Characterisation of the barrier properties of different paint systems
  69. Estudio de la entrada de agua en pinturas de base agua: Comparación entre pintura aplicada y libre