What is it about?
In this study, with the objective of strengthening NR without compromising its compliance, we investigate the reinforcement efficiency of a series of cellulose nanofibers (CNF) with variations in residual hemicellulose, lignin and therefore surface chemistry. Different types of high aspect ratio CNF isolated from Triodia pungens (T. pungens), an Australian arid grass commonly known as spinifex, were added at 0.1–2 wt% loadings into a pre-vulcanized NR latex. CNF/NR nanocomposites then were benchmarked against NR nanocomposites incorporating a well-known wood-derived CNF.
Why is it important?
Reinforcement of natural rubber (NR) using nanofillers often results in an enhancement of the tensile strength, but at the expense of elongation at break and toughness. Incorporation of 0.5 and 0.1 wt% of the sodium hydroxide treated spinifex CNF and choline chloride/urea treated CNF into the NR latex showed respectively 11 and 17% enhancement in tensile stress, and importantly without compromising viscoelastic properties; while addition of 0.1 wt% wood-derived CNF resulted in 18% decrease in both tensile stress and strain coupled with more pronounced latex stiffening.
Read the Original
This page is a summary of: Reinforcement of natural rubber latex using lignocellulosic nanofibers isolated from spinifex grass, Nanoscale, January 2017, Royal Society of Chemistry, DOI: 10.1039/c7nr02632c.
You can read the full text:
The following have contributed to this page