What is it about?
The dry wear of polytetrafluoroethylene (PTFE)-based composites, including bronze-filled composites (B60), glass-filled composites (G15), and carbon-filled composites (C25), produced by the mold casting method were investigated under different sliding conditions. The Taguchi L27 method and the analysis of variance were used to identify the effect of process parameters on the wear of tested materials. Experimental results showed that the wear resistance of G15 polymer composites was better than those of C25 and B60 ones. The specific wear rate decreased with increasing sliding distance and load, but partly decreased with increasing tensile strength.
Featured Image
Why is it important?
The Taguchi L27 method and the analysis of variance were used to identify the effect of process parameters on the wear of tested materials. Experimental results showed that the wear resistance of G15 polymer composites was better than those of C25 and B60 ones. The specific wear rate decreased with increasing sliding distance and load, but partly decreased with increasing tensile strength.
Read the Original
This page is a summary of: Wear Characteristics of Polymer -Based Composites, Mechanics of Composite Materials, November 2015, Springer Science + Business Media,
DOI: 10.1007/s11029-015-9525-4.
You can read the full text:
Contributors
The following have contributed to this page
