All Stories

  1. Analysis of tensile strength, hardness, and fracture surface of aluminum silicone (Al-Si) with various copper (Cu) percentages using stir casting method
  2. Effect of sintering time on porosity and compressibility of calcium carbonate from Amusium pleuronectes (scallop shell)
  3. Mechanical properties of Al-Si alloys with snail shell powder as reinforced agent
  4. Simulation of hidroxyapatite-coated titanium implant in knee joint using finite element method
  5. ZnO/Ag thin film and reuse for Malachite Green degradation based on solar simulator
  6. Mechanical properties of aluminium silicon (Al-Si) alloys reinforced with 0.015 % nickel oxide nanoparticles with variations of stir casting pouring temperature
  7. Synthesis and characterisation of cobalt oxide (Co3O4) using sol-gel auto combustion method with stirring time variations
  8. Resilience, microstructure, and fracture morphology analysis of aluminum silicone (Al-Si) with various copper (Cu) percentages using stir casting method
  9. Hardness and microstructure of 44%Cu-27% Zn-23%Nb brass with various holding time during the precipitation hardening process
  10. Analysis of corrosion rate, surface roughness, and microstructure of 48Cu-30Zn-18Nb brass alloy in sea water
  11. Heat transfer characteristics of NiO nanofluid in heat exchanger
  12. Synthesis and characterization of cobalt oxide nanoparticles using sol-gel method
  13. High saturation superparamagnetic properties of low-temperature sintering of nickel oxide
  14. Mechanical properties of Al-Si alloy with nanoreinforced manganese oxide by stir casting method
  15. Optimization of the mastication strength of hydroxyapatite as an eggshell-based tooth filler
  16. Properties of soft magnetic material SmCo5 synthesized using low-temperature sol-gel method
  17. The effect of ZnO addition against crystallinity and water absorption capacity of biofoam based cassava starch reinforced bacterial cellulose
  18. Synthesis and characterization of CaO/CaCO3 from quail eggshell waste by solid state reaction process
  19. Convective heat transfer characteristics of TiO2-EG nanofluid as coolant fluid in heat exchanger
  20. Heat transfer enhancement using nanofluids (MnFe2O4-ethylene glycol) in mini heat exchanger shell and tube
  21. Multistage artificial aging optimization for tensile properties of Duralium using Response Surface Method (RSM)
  22. Mechanical and physical properties of aluminium-silicon (Al-Si) casting alloys reinforced by Zinc Oxide (ZnO)
  23. Properties of Mn0.4Zn0.6Fe2O4 and Mn0.6Zn0.4Fe2O4 as Nanocatalyst for Ammonia Production
  24. Hardness improvement on low carbon steel using pack carbonitriding method with holding time variation
  25. Properties of Y3Fe5O12 (YIG) as Nanocatalyst for Ammonia Formation Produced from Magnetic Induction Method (MIM)
  26. Mechanical Properties of Volcanic Ash Based Geopolymer Concrete
  27. ZnO
  28. CNT
  29. Synthesis ZnO
  30. Ammonia
  31. ZnO for Dental Amalgam
  32. Hardness of ZnO and Alumina
  33. YIG for Ammonia
  34. Ammonia Synthesis
  35. YIG nanocatalyst
  36. Ammonia synthesis
  37. ammonia synthesis
  38. ZnO for Detector
  39. Ammonia Synthesis
  40. EM Transmitter
  41. Synthesis ZnO