All Stories

  1. Dual-function valorization of low-grade fly ash via zeolitization for environmental remediation and concrete enhancement
  2. Hydraulic conductivity of CFBC fly ash-based geopolymer: Toward sustainable liner materials
  3. Enhancing low-quality fly ash geopolymer paste with polyvinyl alcohol (PVA) fiber under steam curing: Toward improved mechanical performance and future applications of fibrous paste
  4. High strength and highly permeable 3D-printed plastic gyroid TPMS structures for pervious pavement applications
  5. Capillary Imbibition of Concrete Containing Cold Bonded Fly Ash-Based Lightweight Aggregate in a Salt Environment
  6. Shear Behavior of Small-Scale Continuous Hidden Beams Using Tied and Spiral Stirrups
  7. Managing Biofouling from Ships in Indonesia: Regulation versus Implementation
  8. Transforming Sidoarjo Volcanic Mud as Nano Filler to Improve Mechanical Properties of Hydrogel-Based Self-Healing Mortar
  9. Synthesis of nanoclay from Sidoarjo mud volcano by sonication method: particle breakage kinetics and mechanism
  10. Valorization of bauxite residue for sustainable construction materials: Chemical, thermal, and mechanical properties
  11. Potential use of fly ash based nano silica as mineral additive to improve the mechanical properties of self-healing mortar
  12. Run-of-mine bauxite processing residue recovery from the mining industry for the production of artificial aggregate geopolymer paste
  13. Flocculant Assisted Treatment of Suspended Sidoarjo Mud
  14. Innovative cement replacement using calcined bauxite residue: enhancing environmental sustainability in the construction sector
  15. Life cycle environmental impact of flexural steel reinforced concrete beams under the coupled degradation of crack development and steel corrosion attack using a stochastic approach
  16. Effects of HVFA with the addition of bottom ash, NaOH, and CaCO3 on self-compacting concrete (SCC) in tidal environments
  17. The Influence of Precursor to Activator Ratio and Curing Temperature on Geopolymer Paste with One-Part Method
  18. Biogrouting with microbial-induced carbonate precipitation (MICP) for improving the physical and mechanical properties of granular soils potential liquefaction
  19. Utilization of Soil Microbial Community to Enhance Mechanical Properties of Geopolymer Paste for Sustainable Construction Materials
  20. Dynamic Analysis of MICP-Stabilized Soil and Liquefiable Soil With Varying Salinity Levels
  21. Short-Term Performance of HVFA-SCC Incorporating Bottom Ash, Sodium Hydroxide, and Calcium Carbonate: Physical and Mechanical Properties
  22. Effect of Iron Removal for Quality Improvement of Low-Grade Fly Ash on its Application in Green Concrete
  23. Geometry-Dominated Potassium Release from Porous Metakaolin-Based Geopolymers for Sustainable Fertilization
  24. Run-of-Mine Bauxite Processing Residue Recovery from the Mining Industry for the Production of Artificial Aggregate Geopolymer Paste
  25. The Effect of Biofouling on Cement based Concrete Substrate: Insights from Microfouling and Macrofouling Growth
  26. One Part Method for Making Geopolymer Paste using Flocculated Sidoarjo Mud
  27. Sustainable construction materials: a bibliometric analysis of research on bauxite residues utilization in artificial aggregate production
  28. Effect of Mixing Sequence on Green Concrete Using Artificial Coarse Aggregate
  29. The Potential of Seawater in Geopolymer Mixtures – Effect of Alkaline Activator, Seawater, and Steam Curing on the Strength of Geopolymer Paste
  30. The Effect of Fiber on the Green Strength and Buildability of High-Strength 3D Printing Concrete
  31. A review of aluminosilicate sources from inorganic waste for geopolymer production: Sustainable approach for hydrocarbon waste disposal
  32. The influence of variations in salinity levels on the biocementing process on soil improvement of liquefaction potential
  33. Utilization Of Buton Asphalt Solid Waste (ASW) Waste Bitumen Extraction In Concrete
  34. Porous pot to protect mangrove propagules
  35. Bacteria Isolation of Kerosene Contaminated Asphalt Waste (Asbuton)
  36. Durability of high-volume fly ash concrete incorporating microbes and bottom ash under accelerated chloride attack
  37. The effect of acid attack on CFBC fly ash-based geopolymer paste with different alkaline activator
  38. Biocementing process to improve the physical and mechanical properties of saline soils that have the potential for liquefaction
  39. Green Protective Layer from Geopolymer Mortars for Portland Concrete Exposed to Real Marine Environment
  40. Utilization Of Soil Microbial Communities To Enhance Mechanical Properties of Geopolymer Paste for Sustainable Construction Materials
  41. Performance of Artificial Coarse Aggregates from a Mixture of Hampangen Clay and Palm Shell Charcoal by Geopolymerization Method
  42. Effect of Borax on Very High Calcium Geopolymer Concrete
  43. External Shear Strengthening of RC Beams with Anchored Geopolymer Fiber Mortar Panel: An Experimental Study
  44. Study of Self Compacting Geopolymer Concrete (SCGC) haunch beams at monotonic loading and loading-unloading scheme
  45. The characteristic of very high-performance concrete (VHPC)
  46. Geopolymer Haunch Beam‒Column Connection Behavior
  47. The effect of NaOH molarity on the performance of geopolymer concrete using fly ash from North Sumatera and Aceh
  48. Corrosion Rate and Weight Loss of Geopolymer Mortar Coated Concrete Specimens with Different Thicknesses
  49. The Application of Microbes to the Fly Ash-Based Alkali-Activated Material Performance Containing Slag
  50. The Effect of GGBFS and Additional Cement, Water, and Superplasticizer on the Mechanical Properties of Workable Geopolymer Concrete
  51. The Effect of Replacing Natural Aggregate with Geopolymer Artificial Aggregates on Air Voids of Hot Mix Asphalt
  52. Utilization of High-Volume Fly Ash in Pervious Concrete Mixtures for Mangrove Conservation
  53. The effect of reinforcement ratio on the flexural performance of alkali-activated fly ash-based geopolymer concrete beam
  54. Experimental and analytical study for shear strengthening of reinforced-concrete beams using a prefabricated geopolymer–mortar panel
  55. Mix Design Formulation and Stress-Strain Relationship of Fly Ash-Based Workable Geopolymer Concrete: an Experimental Study
  56. THE EFFECT OF RE-CALCINATION FLY ASH ON GEOPOLYMER PERFORMANCE
  57. Autoclaved Aerated Concrete (AAC) made from Sidoarjo mud (Lusi mud)
  58. Circular Economy of Coal Fly Ash and Silica Geothermal for Green Geopolymer: Characteristic and Kinetic Study
  59. Corrigendum to Green geopolymer cement with dry activator from geothermal sludge and sodium hydroxide [J. Clean. Prod., vol. 293, 15 April 2021, 126143]
  60. Shear-bond behavior of self-compacting geopolymer concrete to conventional concrete
  61. Texture and Skid Resistance of Asphalt Concrete Surface Course Incorporating Geopolymer Artificial Aggregates
  62. Influence of Fly Ash-Based Geopolymers on Treated-Contaminated Soil Properties
  63. Nonlinear finite element study on element size effects in alkali-activated fly ash based reinforced geopolymer concrete beam
  64. Self-Compacting-Geopolymer-Concrete (SCGC) Retrofitted Haunch
  65. Pengaruh Penambahan Mikroba untuk Meningkatkan Kepadatan Pasta Berbahan Fly Ash
  66. ASPHALT CONCRETE MIXTURE PRODUCED USING RECLAIMED ASPHALT PAVEMENT AND FLY ASH AS ARTIFICIAL AGGREGATE AND FILLER
  67. Deflection Function Formulation for Simply Supported thin Plate Using Variational Approach
  68. Improving Geopolymer Characteristics with Addition of Poly-Vinyl Alcohol (PVA) Fibers
  69. Full-Genome Sequence of Bacillus safensis Strain IDN1, Isolated from Commercially Available Natto in Indonesia
  70. Green geopolymer cement with dry activator from geothermal sludge and sodium hydroxide
  71. The comparison of regulations on fly ash as a hazardous waste in Indonesia and several countries
  72. Effect of microbes addition on the properties and surface morphology of fly ash-based geopolymer paste
  73. THE IMPACT OF OPEN DUMPING METHOD IN NGIPIK LANDFILL INVESTIGATED WITH ELECTRICAL RESISTIVITY TOMOGRAPHY (ERT) AND VERY LOW-FREQUENCY ELECTROMAGNETIC (VLF-EM)
  74. Effect of Chloride Ions on Concrete with Geopolymer Coatings in Coastal Area
  75. Combination of precipitated-calcium carbonate substitution and dilute-alkali fly ash treatment in a very high-volume fly ash cement paste
  76. Effect of embedment length on bond strength of geopolymer concrete
  77. Compressive strength of medium calcium fly ash based geopolymer paste
  78. CRACKED SOILS BEHAVIOR DUE TO DRYING CONDITIONS USING A FUZZY C-MEANS METHOD
  79. The effect of alkali concentration on chloride penetration in geopolymer concrete
  80. Low heat concrete hydration thermal reduction with bioconc
  81. The Effects of Na2SiO3/NaOH Ratios on the Volumetric Properties of Fly Ash Geopolymer Artificial Aggregates
  82. Assessment to Mechanical Material Properties of Natural and Metakaolin based Geopolymer Stabilized Soil
  83. Bond Behaviour Between Reinforcing Bars and Geopolymer Concrete By Using Pull-out Test
  84. Methods to Characterize Fly Ash Quality in the Field
  85. Characterization of Reclaimed Asphalt Pavement (RAP) as a road pavement material (National Road Waru, Sidoarjo)
  86. Mechanical properties of concrete composed of sintered fly ash lightweight aggregate
  87. The influence of molarity variations to the mechanical behavior of geopolymer concrete
  88. The effect of additional aluminium to the strength of geopolymer paste
  89. Effects of microbial agents to the properties of fly ash-based paste
  90. Characterization and compressive strength of fly ash based-geopolymer paste
  91. Physical and Chemical Character of Fly Ash of Coal Fired Power Plant in Java
  92. Study on The Geopolymer Concrete Properties Reinforced with Hooked Steel Fiber
  93. Effect of Activators on Strength of Hybrid Alkaline Cement
  94. The Influence of Salt Water on Chloride Penetration in Geopolymer Concrete
  95. The Effect of Temperature Curing on Geopolymer Concrete
  96. The Effect of High Temperature on Compression Strength of Geopolymer Paste
  97. Optimizing High Performance Self Compacting Concrete
  98. Properties of Mn0.4Zn0.6Fe2O4 and Mn0.6Zn0.4Fe2O4 as Nanocatalyst for Ammonia Production
  99. Chemical and Physical Characterization of Fly Ash as Geopolymer Material
  100. An approximate deflection function for simply supported quadrilateral thin plate by variational approach
  101. The effect of sintering temperature on the properties of metakaolin artificial lightweight aggregate
  102. Factors influencing strength and setting time of fly ash based-geopolymer paste
  103. An Investigation of Damage Factors in Industrial Scale of Light-Weight Bricks Production
  104. The effect of steam curing on chloride penetration in geopolymer concrete
  105. The Application of PVA Fiber to Improve the Mechanical Properties of Geopolymer Concrete
  106. Mechanical Properties of Geopolymer Concrete Exposed to Combustion
  107. Damage Process of Concrete Around Anchor Frame Inside Footing for Steel Pier
  108. Effect of Curing Temperature and Fiber on Metakaolin-based Geopolymer
  109. Modeling the Cyclic Response of Perfobond-rib Shear Connectors
  110. Performance of Headed Stud on Steel-concrete Composite Bridge Deck as Shear Connector Subjected to Normal Force
  111. The influence of plain bar on bond strength of geopolymer concrete
  112. The relationship between Vickers microhardness and compressive strength of functional surface geopolymers
  113. The relationship between vickers microhardness and compressive strength of functional surface geopolymers
  114. Experimental Study on Internal RH of BFS Mortars at Early Age
  115. Properties of Y3Fe5O12 (YIG) as Nanocatalyst for Ammonia Formation Produced from Magnetic Induction Method (MIM)
  116. Mechanical Properties of Volcanic Ash Based Geopolymer Concrete
  117. Synthesis and Characterization of Ni<sub>0.8</sub>Zn<sub>0.2</sub>Fe<sub>2</sub>O<sub>4 </sub> Nanoparticles by Self-Combustion Technique
  118. Pemanfaatan Mikrobakteri Terhadap Beton Mutu Tinggi dengan Tambahan Silica Fume
  119. Properties and Application of Geopolymers
  120. Effect of Silica Fume and Glass Powder on High-Strength Paste
  121. Increasing Mechanical Strength with PVA Fiber and Glass Powder in Concrete
  122. An Application of Rice Husk Ash (RHA) and Calcium Carbonate (CaCo3) as Materal for Self-Healing Cement
  123. Geopolymer Grout Material
  124. Characterization of Fly Ash on Geopolymer Paste
  125. Lightweight Geopolymer Binder with Abaca Fiber in Different Curing
  126. Fly Ash Based Geopolymer Concrete
  127. Application of Pozzolan as Materials of Geopolymer Paste
  128. Analysis of Coal Waste Solidification as an Alternative Filler Material in Asphalt Concrete Mixture
  129. The Influence of Si:Al and Na:Al on the Physical and Microstructure Characters of Geopolymers Based on Metakaolin
  130. Effect of Microwave Curing to the Compressive Strength of Fly Ash Based Geopolymer Mortar
  131. Oil Palm Clinker Potentility for Producing Lightweight Concrete: Compressive Strength, Tensile and Modulus of Elasticity Analysis
  132. A Review on the Manufacturing of Lightweight Aggregates Using Industrial By-Product
  133. Correlation between Na2SiO3/NaOH and NaOH Molarity to Flexural Strength of Geopolymer Ceramic
  134. Sidoarjo Mud-Based Lightweight Mortar Using Foaming Agent and Aluminum Powder
  135. Effect of Sodium Hydroxide (NaOH) Concentration on Compressive Strength of Alkali-Activated Slag (AAS) Mortars
  136. Multiscale Coupled-Hygromechanistic Approach to the Life-Cycle Performance Assessment of Structural Concrete
  137. The Influence of Alkali Activator Concentration to Mechanical Properties of Geopolymer Concrete with Trass as a Filler
  138. Lightweight Geopolymer Binder Base on Sidoarjo Mud
  139. Mechanical Properties of MIRHA-Fly Ash Geopolymer Concrete
  140. The Influence of Si:Al and Na:Al On The Physical and MicrostructureCharacters of Geopolymers
  141. Residual Fatigue Life Assessment of Damaged RC Bridge Slabs Based on Site-Inspection for Cracking: A Quantitative Discussion
  142. Identifiable Stress State of Wind Turbine Tower-foundation System Based on Field Measurement and FE Analysis
  143. Influence of Coarse Aggregates on the Shear Resistance of Perfobond Rib Shear Connector
  144. Mechanical Properties of Saturated Concrete Depending on the Strain Rate
  145. Rate‐dependent model of structural concrete incorporating kinematics of ambient water subjected to high‐cycle loads
  146. Crack Water Interaction and Fatigue Life Assessment of RC Bridge Decks
  147. Sodium sebagai Aktivator Fly Ash, Trass dan Lumpur Sidoarjo dalam Beton Geopolimer
  148. Pseudo-Cracking Approach to Fatigue life Assessment of RC Bridge Decks in Service
  149. A Computational Simulation for the Damage Mechanism of Steel-Concrete Composite Slabs under High Cycle Fatigue Loads
  150. Fatigue Life Simulation of RC Bridge Slab with Initial Defects under Water
  151. FATIGUE LIFE SIMULATION AND FAILURE MODE FOR STEEL-CONCRETE COMPOSITE BRIDGE DECK BASED UPON A DIRECT PATH-INTEGRAL SCHEME
  152. Shear Fatigue Simulation of RC Beams Subjected to Fixed Pulsating and Moving Loads
  153. LEACHABLE BORON FROM FLY ASH