All Stories

  1. Matrix-particle interactions in catalyzed and uncatalyzed copper-filled epoxy matrix composites

    Article • Journal of Applied Polymer Science, January 2019, Wiley

    Dr Walter Salgueiro

  2. Crystallization in PHB/DGEBA blends

    Article • Journal of Polymer Science Part B Polymer Physics, April 2014, Wiley

    Dr Walter Salgueiro

  3. Evolution of the free volume and glass transition temperature with the degree of cure of polybutadiene rubbers

    Article • Polymer Testing, June 2013, Elsevier

    Dr Walter Salgueiro

  4. Effect of the nano-cellulose content on the properties of reinforced polyurethanes. A study using mechanical tests and positron anihilation spectroscopy

    Article • Polymer Testing, February 2013, Elsevier

    Dr Walter Salgueiro, Prof. Norma Esther Marcovich

  5. Study of the water absorption and its influence on the Young's modulus in a commercial polyamide

    Article • Polymer Testing, February 2013, Elsevier

    Dr Walter Salgueiro

  6. Miscibility in crystalline/amorphous blends of poly(3-hydroxybutyrate)/DGEBA

    Article • Journal of Polymer Science Part B Polymer Physics, January 2013, Wiley

    Dr Walter Salgueiro

  7. Separación de fases y cristalinidad en mezclas epoxy/poli-3-hidroxibutirato

    Article • Polímeros, January 2013, FapUNIFESP (SciELO)

    Dr Walter Salgueiro

  8. Physical Phenomena Related to Free Volumes in Rubber and Blends

    Article • January 2013, Springer Science + Business Media

    Dr Walter Salgueiro

  9. A study about the structure of vulcanized natural rubber/styrene butadiene rubber blends and the glass transition behavior

    Article • Journal of Applied Polymer Science, December 2011, Wiley

    Dr Walter Salgueiro

  10. Temperature dependence on free volume in cured natural rubber and styrene-butadiene rubber blends

    Article • Physical Review E, May 2011, American Physical Society (APS)

    Dr Walter Salgueiro

  11. Measurement of the Young's modulus in particulate epoxy composites using the impulse excitation technique

    Article • Materials Science and Engineering A, July 2010, Elsevier

    Dr Walter Salgueiro

  12. On the matrix-particle interphase in epoxy-based composites

    Article • Journal of Alloys and Compounds, April 2010, Elsevier

    Dr Walter Salgueiro

  13. On the cure process in an epoxy-anhydride system

    Article • physica status solidi c, November 2009, Wiley

    Dr Walter Salgueiro

  14. Influence of the cure temperature and the accelerator content on the free volume in a DGEBA epoxy-anhydride-imidazole system

    Article • physica status solidi c, November 2009, Wiley

    Dr Walter Salgueiro

  15. A SAXS and swelling study of cured natural rubber/styrene-butadiene rubber blends

    Article • Journal of Polymer Science Part B Polymer Physics, October 2009, Wiley

    Dr Walter Salgueiro

  16. Influence of the filler content on the thermal expansion behavior of an epoxy matrix particulate composite

    Article • Materials Science and Engineering B, February 2009, Elsevier

    Dr Walter Salgueiro

  17. Correlation between nanohole volume and mechanical properties of amine-cured epoxy resin blended with poly(ethylene oxide)

    Article • Polymers for Advanced Technologies, October 2008, Wiley

    Dr Walter Salgueiro

  18. PALS study of epoxy matrices: self-assembly of block copolymers and its capability for nanostructuring thermosetting systems

    Article • physica status solidi c, September 2007, Wiley

    Dr Walter Salgueiro

  19. A PALS and DSC study on SBR/NR blends

    Article • physica status solidi c, September 2007, Wiley

    Dr Walter Salgueiro

  20. Electron paramagnetic resonance and positron annihilation study of the compensation mechanisms in donor-doped ceramics

    Article • Journal of Physics and Chemistry of Solids, July 2007, Elsevier

    Dr Walter Salgueiro

  21. Evolution of the crosslink structure in the elastomers NR and SBR

    Article • Radiation Physics and Chemistry, February 2007, Elsevier

    Dr Walter Salgueiro

  22. Volume changes at macro- and nano-scale in epoxy resins studied by PALS and PVT experimental techniques

    Article • Radiation Physics and Chemistry, February 2007, Elsevier

    Dr Walter Salgueiro

  23. Influencia del proceso de curado y del contenido de carga sobre la Tg y el volumen libre en compuestos particulados de matriz epoxi

    Article • Matéria (Rio de Janeiro), January 2007, FapUNIFESP (SciELO)

    Dr Walter Salgueiro

  24. Cure temperature influence on natural rubber—A small angle X-ray scattering study

    Article • Journal of Polymer Science Part B Polymer Physics, January 2007, Wiley

    Dr Walter Salgueiro

  25. On defects at nanoscale formed in Al–Cu matrix composites fabricated by pressure infiltration

    Article • Materials Science and Engineering A, November 2006, Elsevier

    Dr Walter Salgueiro

  26. Nanohole volume dependence on the cure schedule in epoxy thermosetting networks: A PALS study

    Article • Polymer, June 2006, Elsevier

    Dr Walter Salgueiro

  27. On the free volume evolution in a deformed epoxy composite. A positron annihilation study

    Article • Polymer, October 2005, Elsevier

    Dr Walter Salgueiro

  28. Direct relationships between volume variations at macro and nanoscale in epoxy systems. PALS/PVT measurements

    Article • Polymer, September 2004, Elsevier

    Dr Walter Salgueiro

  29. Dependence of the network structure of cured styrene butadiene rubber on the sulphur content

    Article • Polymer, August 2004, Elsevier

    Dr Walter Salgueiro, Dr. Silvina Cerveny

  30. Porosity study on free mineral addition cement paste

    Article • Cement and Concrete Research, January 2004, Elsevier

    Dr Walter Salgueiro

  31. Yield and internal stresses in aluminum filled epoxy resin. A compression test and positron annihilation analysis

    Article • Polymer, May 2003, Elsevier

    Dr Walter Salgueiro

  32. Characterization of free volume in particulate-filled epoxy resin by means of dynamic mechanical analysis and positron annihilation lifetime spectroscopy

    Article • Polymer International, November 2002, Wiley

    Dr Walter Salgueiro

  33. Characterization of free volume during vulcanization of styrene butadiene rubber by means of positron annihilation lifetime spectroscopy and dynamic mechanical test

    Article • January 2002, American Physical Society (APS)

    Dr Walter Salgueiro, Dr. Silvina Cerveny

  34. On the Microstructural Information of the Short-Lived Positron Lifetime Component in Polymer Metallic Composites

    Article • phys stat sol (a), July 2001, Wiley

    Dr Walter Salgueiro

  35. Filler Content Influence on the Positron Annihilation Response in an Epoxy Resin Composite

    Article • Materials Science Forum, April 2001, Trans Tech Publications

    Dr Walter Salgueiro

  36. The post-quench vacancy behavior in β-CuZnAl alloy

    Article • phys stat sol (a), July 1993, Wiley

    Dr Walter Salgueiro

  37. Positron Lifetime Spectroscopy in Quenched β-CuZnAL

    Article • phys stat sol (a), October 1992, Wiley

    Dr Walter Salgueiro