All Stories

  1. Films of Poly(Hydroxybutyrate) (PHB) and Copper with Antibacterial Activity
  2. Vinasse: from a residue to a high added value biopolymer
  3. Glycerol-based additives of poly(3-hydroxybutyrate) films
  4. Direct 3D Printing of Poly(lactic acid) on Cotton Fibers: Characterization of Materials and Study of Adhesion Properties of the Resulting Composites
  5. Preparation and Characterization of an Immobilized Enological Pectinase on Agar‐Alginate Beads
  6. Composite coatings based on linear and branched block copolymers for hydroxyapatite deposition in simulated body-fluid
  7. Design and optimization of poly(hydroxyalkanoate)s production plants using alternative substrates
  8. Starch/Poly(ε-caprolactone) Graft Copolymers Synthetized by γ-Radiation and Their Application as Compatibilizer in Polymer Blends
  9. Composite films with UV barrier capacity to minimize flavored waters degradation
  10. Microscopic State of Polymer Network Chains upon Swelling and Deformation
  11. Crystalline morphology of thermoplastic starch/talc nanocomposites induced by thermal processing
  12. Immobilization of enological pectinase in calcium alginate hydrogels: A potential biocatalyst for winemaking
  13. Photopolymerization-assisted self-assembly as a strategy to obtain a dispersion of very high aspect ratio nanostructures in a polystyrene matrix
  14. Effects of Branches on the Isothermal Crystallization of Copolymers Based on Poly(ϵ‐caprolactone)
  15. Improvement in poly(ε-caprolactone) bio-activity. Structural characterization and in vitro assessment
  16. Facile one-pot synthesis and solution behavior of poly(acrylic acid)-block-polycaprolactone copolymers
  17. Biocomposites Based on Thermoplastic Starch and Granite Sand Quarry Waste
  18. Oxidative Degradation of Thermoplastic Starch Induced by UV Radiation
  19. Tailor-Made, Linear, and “Comb-Like” Polyester-Based Copolymers: Synthesis, Characterization, and Thermal Behavior of Potential 3D-Printing/Electrospinning Candidates
  20. Película biodegradable de almidón de maíz termoplástico y quitosano con actividad antimicrobiana empleada como envase activo
  21. Efecto de la adición de bentonita sobre las propiedades ópticas de diferentes materiales compuestos poliméricos
  22. Fabricación de recubrimientos compuestos de Bioglass®/poli(ɛ-capro-lactona) obtenidos por co-deposición electroforética sobre acero inoxidable
  23. Improved intracellular PHA determinations with novel spectrophotometric quantification methodologies based on Sudan black dye
  24. Modeling the bioconversion of starch to P(HB-co-HV) optimized by experimental design using Bacillus megaterium BBST4 strain
  25. A Straightforward Methodology for the Synthesis of α,ω-Telechelic Poly(dimethylsiloxane)s
  26. Active films based on thermoplastic corn starch and chitosan oligomer for food packaging applications
  27. Novel spectrophotometric technique for rapid determination of extractable PHA using Sudan black dye
  28. Enhancement of mechanical and optical performance of commercial polystyrenes by blending with siloxane-based copolymers
  29. Contribution of Entanglements to Polymer Network Elasticity
  30. Mild microwave-assisted synthesis of aluminum-pillared bentonites
  31. Bioconversion of glycerol to poly(HB-co-HV) copolymer in an inexpensive medium by a Bacillus megaterium strain isolated from marine sediments
  32. Anionic Ring Opening Polymerization of ε-Caprolactone Initiated by Lithium Silanolates
  33. Optimal Design of Poly (3-hydroxybutyrate) Production using alternative Carbon Sources
  34. Thermal Characterization of “Comb‐Like” Block Copolymers Based on PCL Obtained by Combining ROP and RAFT Polymerizations
  35. Lithium naphthalenides in non-polar or in low-polarity media: some insights regarding their use as initiators in anionic polymerizations
  36. Processing-properties-applications relationship of nanocomposites based on thermoplastic corn starch and talc
  37. Contribution of Linear Guest and Structural Pendant Chains to Relaxational Dynamics in Model Polymer Networks Probed by Time-Domain 1H NMR
  38. Agro-industrial residue from starch extraction of Pachyrhizus ahipa as filler of thermoplastic corn starch films
  39. Enhancement of thermoplastic starch final properties by blending with poly(ɛ-caprolactone)
  40. Thermoplastic starch/talc bionanocomposites. Influence of particle morphology on final properties
  41. Thermoplastic starch plasticized with alginate–glycerol mixtures: Melt-processing evaluation and film properties
  42. Thermoresponsive hydrogels based on alginate-g-poly(N-isopropylacrylamide) copolymers obtained by low doses of gamma radiation
  43. A new way of quantifying the production of poly(hydroxyalkanoate)s using FTIR
  44. Viscoelastic response of linear defects trapped in polymer networks
  45. Assessment of alternative sources of seaweed polysaccharides in Argentina: potentials of the agarophyte Gelidium crinale (Hare ex Turner) Gaillon (Rhodophyta, Gelidiales)
  46. Phase behavior of model poly(butadiene 1,3)-block-(dimethylsiloxane) copolymers
  47. Food packaging bags based on thermoplastic corn starch reinforced with talc nanoparticles
  48. Thermoresponsive hydrogels from alginate-based graft copolymers
  49. Electrical response of bivalent modifier cations into a vanadium–tellurite glassy matrix
  50. Dynamic response of transiently trapped entanglements in polymer networks
  51. Controlled One-Pot Synthesis of Polystyrene-block -Polycaprolactone Copolymers by Simultaneous RAFT and ROP
  52. Thermoplastic starch films reinforced with talc nanoparticles
  53. Evaluation of by-products from the biodiesel industry as fermentation feedstock for poly(3-hydroxybutyrate-co-3-hydroxyvalerate) production by Cupriavidus necator
  54. Recent Studies on Alginates Based Blends, Composites, and Nanocomposites
  55. Influence of amorphous block on the thermal behavior of well-defined block copolymers based on ε-caprolactone
  56. Production of Fermentation Feedstock from Jerusalem Artichoke Tubers and its Potential for Polyhydroxybutyrate Synthesis
  57. Macroporous poly(EGDMA-co-HEMA) networks: Morphological characterization from their behaviour in the swelling process
  58. Biosynthesis of PHB from a new isolated Bacillus megaterium strain: Outlook on future developments with endospore forming bacteria
  59. Dynamics of dislocations in a two-dimensional block copolymer system with hexagonal symmetry
  60. Structure of Micelles Formed by Highly Asymmetric Polystyrene- b -Polydimethylsiloxane and Polystyrene- b -poly[5-( N , N -diethylamino)isoprene] Diblock Copolymers
  61. Synthesis and morphology of model PS‐b‐PDMS copolymers
  62. Thermogelling behaviour of starches to be used in ceramic consolidation processes
  63. Application of Dynamic Optimization Techniques for Poly(β-hydroxybutyrate) Production in a Fed-Batch Bioreactor
  64. Defect formation during a continuous phase transition
  65. Controlled synthesis of poly(dimethylsiloxane) homopolymers using high-vacuum anionic polymerization techniques
  66. Transiently Trapped Entanglements in Model Polymer Networks
  67. Influence of the extraction–purification conditions on final properties of alginates obtained from brown algae (Macrocystis pyrifera)
  68. Synthesis and physicochemical characterization of a well-defined poly(butadiene 1,3)-block-poly(dimethylsiloxane) copolymer
  69. Oxidation of sodium alginate and characterization of the oxidized derivatives
  70. Synthesis and characterization of model polybutadiene-1,4-b-polydimethylsiloxane-b-polybutadiene-1,4 copolymers
  71. Synthesis and characterization of a β-CD-alginate conjugate
  72. Double Quantum NMR Applied to Polymer Networks with Low Concentration of Pendant Chains
  73. Synthesis and characterization of model diblock copolymers of poly(dimethylsiloxane) with poly(1,4-butadiene) or poly(ethylene)
  74. Arm Retraction Potential of Branched Polymers in the Absence of Dynamic Dilution
  75. Viscoelastic properties of networks with low concentration of pendant chains
  76. Synthesis of polybutadiene‐graft‐poly(dimethylsiloxane) and polyethylene‐graft‐poly(dimethylsiloxane) copolymers with hydrosilylation reactions
  77. Novel synthesis of polyethylene-poly(dimethylsiloxane) copolymers with a metallocene catalyst
  78. Thermal and mechanical characterization of linear low-density polyethylene/wood flour composites
  79. Bulk hydrosilylation reaction of poly(dimethylsiloxane) chains catalyzed by a platinum salt: Effect of the initial concentration of reactive groups on the final extent of reaction
  80. Study of oriented block copolymers films obtained by roll-casting
  81. Novel synthesis of cyclic methylvinylsiloxanes by the reaction of methylvinyl diethoxysilane with phosphorous pentachloride
  82. Linear viscoelastic relaxation modulus of polydisperse poly(dimethylsiloxane) melts containing unentangled chains
  83. Rheological characterization of molten ethylene–α-olefin copolymers synthesized with Et[Ind]2ZrCl2/MAO catalyst
  84. Optical properties of CaCO3-filled poly(ethylene-co-vinyl acetate) films
  85. Terminal Relaxation of Model Poly(dimethylsiloxane) Networks with Pendant Chains
  86. FTIR, 13C NMR, and GPC analysis of high‐propylene content co‐ and terpolymers with ethylene and higher α‐olefins synthesized with EtInd2ZrCl2/MAO
  87. Synthesis and rheological characterization of linear and star-shaped polydimethylsiloxanes
  88. Influence of polydispersity on the viscoelastic properties of linear polydimethylsiloxanes and their binary blends
  89. Model polydimethylsiloxanes subjected to thermal weathering: effect on molecular weight distributions
  90. Rouse's dynamics of networks with pendant chains
  91. VIBRATION MODES IN A STRING OF THREE BRANCHES
  92. Relaxation modes of molten polydimethylsiloxane
  93. Modification of propylene-ethylene copolymers by reactive extrusion
  94. Thermogravimetric analysis of starch-based biodegradable blends
  95. Irradiation-modification of starch-containing thermoplastic blends. II. Rheological studies
  96. Irradiation‐modification of starch‐containing thermoplastic blends. I. Modification of properties and microstructure
  97. Irradiation-modification of starch-containing thermoplastic blends. I. Modification of properties and microstructure
  98. Influence of Pendant Chains on Mechanical Properties of Model Poly(dimethylsiloxane) Networks. 1. Analysis of the Molecular Structure of the Network
  99. Influence of Pendant Chains on Mechanical Properties of Model Poly(dimethylsiloxane) Networks. 2. Viscoelastic Properties
  100. Permeability and diffusional studies on silicone polymer networks with controlled dangling chains
  101. Influence of the final extent of reaction on the structure of model polydimethylsiloxane networks obtained by the end-linking hydrosilation reaction
  102. Rheological properties of thermoplastic starch and starch/poly(ethylene-co-vinyl alcohol) blends
  103. Synthesis and Characterization of Monodisperse α,ω-Divinylpolydimethylsiloxane and ω-Vinylpolydimethylsiloxane
  104. Block copolymers: synthesis, properties and application
  105. Block copolymers: synthesis, properties and application