All Stories

  1. Microstructural Characterization of a Component Manufactured by Hybrid Casting of Two Different Ferrous Alloys

    Article • Materials Research, January 2023, FapUNIFESP (SciELO)

    Dr Milton SF LIMA

  2. Microstructure and Corrosion Behavior of AISI 316 Steel Layers Deposited on AISI 347 Steel Substrate by Laser Metal Deposition

    Article • Metals, December 2022, MDPI AG

    Dr Milton SF LIMA

  3. Laser Beam Welding of CubeSat 1U Structure Parts Obtained by Powder Bed Fusion

    Article • Metals, November 2022, MDPI AG

    Dr Milton SF LIMA

  4. Effect of the initial substrate temperature on heat transfer and related phenomena in austenitic stainless steel parts fabricated by additive manufacturing using direct energy deposition

    Article • Journal of Materials Research and Technology, May 2022, Elsevier

    Dr Milton SF LIMA

  5. Fatigue Performance of Laser Welds in Heavy-Gage Press Hardening Steels

    Article • Metals, March 2022, MDPI AG

    Dr Milton SF LIMA

  6. Reduced Coefficient of Friction of Laser Surface Hardened AISI 4130 Steel Substrates

    Article • Material Design & Processing Communications, March 2022, Hindawi Publishing Corporation

    Dr Milton SF LIMA

  7. Investigation of Laser Treatment as a Method for Fatigue Crack Growth Retardation in Aluminum Alloy 2198-T851

    Article • Metals, December 2021, MDPI AG

    Dr Milton SF LIMA

  8. Influence of laser-hardening on microstructure and hardness of plasma-nitrided compacted graphite iron

    Article • Optics & Laser Technology, December 2021, Elsevier

    Dr Milton SF LIMA

  9. Effect of laser welding on microstructure and mechanical behaviour of dual phase 600 steel sheets

    Article • Heliyon, December 2021, Elsevier

    Dr Milton SF LIMA

  10. Pulsed laser damage threshold evaluation of a carbon fiber composite skin and its effects on internal substrates

    Article • Optics & Laser Technology, November 2021, Elsevier

    Dr Milton SF LIMA

  11. Improvement weldability of dissimilar joints (Ti6Al4V/Al6013) for aerospace industry by laser beam welding

    Article • The International Journal of Advanced Manufacturing Technology, June 2021, Springer Science + Business Media

    Dr Milton SF LIMA

  12. Influence of Laser Beam Power and Scanning Speed on the Macrostructural Characteristics of AISI 316L and AISI 431 Stainless Steel Depositions Produced by Laser Cladding Process

    Article • Journal of Materials Engineering and Performance, April 2021, Springer Science + Business Media

    Dr Milton SF LIMA

  13. Heat treatment effects on the hardness and wear behavior of laser-welded AISI40 martensitic steel plates

    Article • The International Journal of Advanced Manufacturing Technology, March 2021, Springer Science + Business Media

    Dr Milton SF LIMA

  14. Experimental and Simulation Analysis of Effects of Laser Bending on Microstructures Applied to Advanced Metallic Alloys

    Article • Metals, February 2021, MDPI AG

    Dr Milton SF LIMA

  15. Evaluation of laser polishing as post-processing of Inconel 625 produced by Directed Energy Deposition

    Article • Procedia Manufacturing, January 2021, Elsevier

    Dr Milton SF LIMA

  16. Determination of Tensile Shear Strength and Corrosion Behavior of Circular Bead Produced by a Laser Beam for Overlapped AISI 304 Steel Sheets

    Article • Soldagem & Inspeção, January 2021, FapUNIFESP (SciELO)

    Dr Milton SF LIMA

  17. Fiber laser welding of hot stamping steel: effect of in situ annealing on the microstructure and mechanical properties

    Article • Welding in the World, September 2020, Springer Science + Business Media

    Dr Milton SF LIMA

  18. Laser beam welding of DP980 dual phase steel at high temperatures

    Article • Optics & Laser Technology, April 2020, Elsevier

    Dr Milton SF LIMA

  19. Scratch resistances of compacted graphite iron with plasma nitriding, laser hardening, and duplex surface treatments

    Article • Tribology International, March 2020, Elsevier

    Giuseppe Pintaude, Dr Milton SF LIMA

  20. Weldability and mechanical behavior of laser-welded TRIP 750 steel sheets

    Article • The International Journal of Advanced Manufacturing Technology, March 2020, Springer Science + Business Media

    Dr Milton SF LIMA

  21. A Comparative Study of Abbreviated Heat Treatments for SAE 4130 Steel After Laser Weldinga

    Article • Materials Research, January 2020, FapUNIFESP (SciELO)

    Dr Milton SF LIMA

  22. Comparing the weldability of AA6013-T4 aluminium alloy on DP600 dual-phase steel with laser welding and resistance spot welding

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, January 2020, Springer Science + Business Media

    Dr Milton SF LIMA

  23. Corrosion Susceptibility and Functionally Graded Properties of Ti-35Nb-4Sn Alloy Processed by Laser Remelting

    Article • Materials Research, January 2020, FapUNIFESP (SciELO)

    Dr Milton SF LIMA

  24. Study of Mechanical Properties in AISI 1020 Steel Used in Diaphragms in Wind Tunnels

    Article • January 2020, Optical Society of America (OSA)

    Dr Milton SF LIMA

  25. Fiber Laser Surface Melting of a NiTi Superelastic Alloy: Influence on Structural and Mechanical Properties

    Article • Metals, November 2019, MDPI AG

    Dr Milton SF LIMA

  26. Phase Separation and Development of the Microstructure for Stainless Steel to Copper Alloy Weld Joints Using a Fiber Laser

    Article • Journal of Aerospace Technology and Management, October 2019, Institute of Aeronautics and Space

    Dr Milton SF LIMA

  27. Effect of Different Forms of Application of a Laser Surface Treatment on Fatigue Crack Growth of an AA6013-T4 Aluminum Alloy

    Article • Journal of Materials Engineering and Performance, September 2019, Springer Science + Business Media

    Dr Milton SF LIMA

  28. Weldability of a zirconium alloy comparing resistance and pulsed laser methods

    Article • Nuclear Materials and Energy, August 2019, Elsevier

    Dr Milton SF LIMA

  29. Mechanical behavior and microstructure of a fiber laser–welded TWIP steel

    Article • The International Journal of Advanced Manufacturing Technology, July 2019, Springer Science + Business Media

    Dr Milton SF LIMA

  30. Assessment of the Fatigue Behavior of Ti-6Al-4V ELI Alloy with Surface Treated by Nd:YAG Laser Irradiation

    Article • Materials Research, January 2019, FapUNIFESP (SciELO)

    Dr Milton SF LIMA

  31. Fatigue crack growth behavior of laser-shock processed aluminum alloy 2024-T3

    Article • Procedia Structural Integrity, January 2019, Elsevier

    Dr Milton SF LIMA

  32. Laser-induced heating for enhanced fatigue life of aerospace aluminum alloys

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, October 2018, Springer Science + Business Media

    Dr Milton SF LIMA

  33. Comparative study about the welding of NiTi shape memory alloys by GTAW, PAW and LBW processes.

    Article • Materials Science Forum, September 2018, Trans Tech Publications

    Dr. Raphael Melo, Theophilo Maciel, Dr Milton SF LIMA

  34. Formability of in-situ Austempered Transformation-induced Plasticity Steels After Laser Beam Welding

    Article • Soldagem & Inspeção, September 2018, FapUNIFESP (SciELO)

    Dr Milton SF LIMA

  35. Characterization of Phase Transformations and Microstructural Changes in an API 5CT L80 Steel Grade During Ni Alloy Laser Cladding

    Article • Materials Research, July 2018, FapUNIFESP (SciELO)

    Dr Milton SF LIMA

  36. A Comparative Study of the Heat Input During Laser Welding of Aeronautical Aluminum Alloy AA6013-T4

    Article • Journal of Aerospace Technology and Management, June 2018, FapUNIFESP (SciELO)

    Dr Milton SF LIMA

  37. Laser beam welding of dual-phase DP1000 steel

    Article • Journal of Materials Processing Technology, February 2018, Elsevier

    Dr Milton SF LIMA

  38. Microstructure and wear behaviour of laser hardened SAE 4130 steels

    Article • International Journal of Surface Science and Engineering, January 2018, Inderscience Publishers

    Dr Milton SF LIMA

  39. The influence of laser surface treatment on the fatigue crack growth of AA 2024-T3 aluminum alloy alclad sheet

    Article • Surface and Coatings Technology, November 2017, Elsevier

    Dr Milton SF LIMA

  40. Surface Modification of Ti6Al4V Alloy by Pulsed Lasers: Microstructure and Hydrophobic Behavior

    Article • Materials Research, September 2017, FapUNIFESP (SciELO)

    Dr Milton SF LIMA

  41. Fracture Resistance of Flash Welded and Laser Welded Butt Joints in a Microalloyed HSLA Steel

    Article • Key Engineering Materials, September 2017, Trans Tech Publications

    Dr Milton SF LIMA

  42. Laser surface treatment for enhanced titanium to carbon fiber-reinforced polymer adhesion

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, June 2017, Springer Science + Business Media

    Dr Milton SF LIMA

  43. Evaluation of hydrogen-Induced cracking resistance of the In625 laser coating system on a C-Mn steel substrate

    Article • REM - International Engineering Journal, June 2017, FapUNIFESP (SciELO)

    Dr Milton SF LIMA

  44. Discontinuity Detection in the Shield Metal Arc Welding Process

    Article • Sensors, May 2017, MDPI AG

    Dr Milton SF LIMA

  45. A crack propagation study on T-joints of AA6013-T4 aluminum alloy welded by an Yb:fiber laser

    Article • The International Journal of Advanced Manufacturing Technology, April 2017, Springer Science + Business Media

    Dr Milton SF LIMA

  46. A multi-objective green UAV routing problem

    Article • Computers & Operations Research, April 2017, Elsevier

    Dr Milton SF LIMA

  47. ITO Obtained by Spray Pyrolysis and Coating on Glass Substrate

    Article • Journal of the Brazilian Chemical Society, January 2017, Sociedade Brasileira de Quimica (SBQ)

    Dr Milton SF LIMA

  48. Fatigue in laser welded titanium tubes intended for use in aircraft pneumatic systems

    Article • International Journal of Fatigue, September 2016, Elsevier

    Dr Milton SF LIMA

  49. Experimental Development of Dual Phase Steel Laser-arc Hybrid Welding and its Comparison to Laser and Gas Metal Arc Welding

    Article • Soldagem & Inspeção, September 2016, FapUNIFESP (SciELO)

    Dr Milton SF LIMA

  50. Non-contact sheet forming using lasers applied to a high strength aluminum alloy

    Article • Journal of Materials Research and Technology, July 2016, Elsevier

    Dr Milton SF LIMA

  51. Surface stiffness gradient in Ti parts obtained by laser surface alloying with Cu and Nb

    Article • Surface and Coatings Technology, July 2016, Elsevier

    Dr Milton SF LIMA

  52. Comparing mechanical behaviour of aluminium welds produced by laser beam welding (LBW), friction stir welding (FSW), and riveting for aeronautical structures

    Article • Welding International, February 2016, Taylor & Francis

    Dr Milton SF LIMA

  53. Why not nitriding when doing a heat treatment?

    Article • Advanced Materials Research, January 2016, Trans Tech Publications

    doctor Antonio Jorge A.J. Abdalla, Dr Milton SF LIMA

  54. Phase Transformations during Laser Processing of Aerospace Metallic Materials

    Article • Advanced Materials Research, January 2016, Trans Tech Publications

    Dr Milton SF LIMA

  55. Development of laser beam welding of advanced high-strength steels

    Article • The International Journal of Advanced Manufacturing Technology, August 2015, Springer Science + Business Media

    Dr Milton SF LIMA

  56. Mechanical and Corrosion Properties of a Duplex Steel Welded using Micro-Arc or Laser

    Article • August 2015, FapUNIFESP (SciELO)

    Msc Viviane V Teleginski, Dr Milton SF LIMA

  57. Laser texturing of substrate of coated tools — Performance during machining and in adhesion tests

    Article • Surface and Coatings Technology, August 2015, Elsevier

    Dr Milton SF LIMA

  58. One-sided laser beam welding of autogenous T-joints for 6013-T4 aluminium alloy

    Article • Materials & Design (1980-2015), January 2015, Elsevier

    Dr Milton SF LIMA

  59. Comparison of Mechanical and Microstructural Characteristics in Maraging 300 Steel Welded by three Different Processes: LASER, PLASMA and TIG

    Article • Procedia Engineering, January 2015, Elsevier

    Dr Milton SF LIMA

  60. An Analysis of the Mechanical Behavior of AISI 4130 Steel after TIG and Laser Welding Process

    Article • Procedia Engineering, January 2015, Elsevier

    Dr Milton SF LIMA

  61. Surface Characterization in a 300 M Bainitic Steel Laser Carburizing

    Article • Procedia Engineering, January 2015, Elsevier

    Dr Milton SF LIMA

  62. Mechanical and microstructural characterization of laser-welded joints of 6013-T4 aluminum alloy

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, April 2014, Springer Science + Business Media

    Dr Milton SF LIMA

  63. Microstructure and mechanical behavior of laser additive manufactured AISI 316 stainless steel stringers

    Article • Materials & Design (1980-2015), March 2014, Elsevier

    Dr Milton SF LIMA

  64. Comparison of High Cycle Fatigue in 4340 and 300M Steel Welded with Fiber Laser

    Article • Advanced Materials Research, March 2014, Trans Tech Publications

    Dr Milton SF LIMA

  65. High Cycle Fatigue Behavior and Microstructural Characterization of 6013-T4 Aluminum Alloy Laser Welded Joints

    Article • Advanced Materials Research, March 2014, Trans Tech Publications

    Dr Milton SF LIMA

  66. Study of Laser Welding and Heat Treatments Done in Different High Strength Steels: 4340, 300M, Maraging 300

    Article • October 2013, SAE International

    Dr Milton SF LIMA

  67. Microstructural analyses and wear behavior of the cemented carbide tools after laser surface treatment and PVD coating

    Article • Applied Surface Science, October 2013, Elsevier

    Dr Milton SF LIMA

  68. Soldagem do aço inoxidável AISI 316 com laser à fibra de alta potência: influência dos parâmetros operacionais na micro dureza e na susceptibilidade à corrosão eletrolítica dos cordões de solda

    Article • Matéria (Rio de Janeiro), September 2013, FapUNIFESP (SciELO)

    Dr Milton SF LIMA

  69. A novel proposal to manipulate the properties of titanium parts by laser surface alloying

    Article • Scripta Materialia, April 2013, Elsevier

    Dr Milton SF LIMA

  70. Laser Processing of Carbon Fiber Reinforced Polymer Composite for Optical Fiber Guidelines

    Article • Physics Procedia, January 2013, Elsevier

    Dr Milton SF LIMA

  71. Coated Steel Surfaces with WC by Lasers Action

    Article • Materials Science Forum, August 2012, Trans Tech Publications

    Dr Milton SF LIMA

  72. Phase transformations in an AISI 410S stainless steel observed in directional and laser-induced cooling regimes

    Article • Materials Research, February 2012, FapUNIFESP (SciELO)

    Dr Milton SF LIMA

  73. Occurrence of defects in laser beam welded Al-Cu-Li sheets with t-joint configuration

    Article • Journal of Aerospace Technology and Management, January 2012, Institute of Aeronautics and Space

    Dr Milton SF LIMA

  74. Surface Hardening of an AISI D6 Cold Work Steel Using a Fiber Laser

    Article • Journal of ASTM International, January 2011, ASTM International

    Dr Milton SF LIMA

  75. Surface Hardening of an AISI D6 Cold Work Steel Using a Fiber Laser

    Article • January 2011, ASTM International

    Dr Milton SF LIMA

  76. Surface Hardening of an AISI D6 Cold Work Steel Using a Fiber Laser

    Article • January 2011, ASTM International

    Dr Milton SF LIMA

  77. Simulating the damage accumulation in aircraft bleed system ducts joined by laser and arc welding processes

    Article • Procedia Engineering, January 2011, Elsevier

    Dr Milton SF LIMA

  78. Machining performance of laser surface micro-textured drilling tools

    Article • International Journal of Surface Science and Engineering, January 2011, Inderscience Publishers

    Dr Milton SF LIMA

  79. Wear performance of laser precoating treated cemented carbide milling tools

    Article • Wear, May 2010, Elsevier

    Dr Milton SF LIMA

  80. Cemented carbide surface modifications using laser treatment and its effects on hard coating adhesion

    Article • Surface and Coatings Technology, April 2010, Elsevier

    Dr Milton SF LIMA

  81. Numerical Simulation and Experimental Analysis of Laser Surface Remelting of AISI 304 Stainless Steel Samples

    Article • Materials Science Forum, January 2010, Trans Tech Publications

    Dr Milton SF LIMA, Dr. Noé Cheung

  82. Influence of laser surface texturing on surface microstructure and mechanical properties of adhesive joined steel sheets

    Article • Surface Engineering, April 2009, Taylor & Francis

    Dr Milton SF LIMA

  83. Characterization of a laser-soldered avionic component using lead-free paste

    Article • Optics & Laser Technology, March 2009, Elsevier

    Dr Milton SF LIMA

  84. Laser beam welding aerospace aluminum using fiber lasers

    Article • October 2008, SPIE

    Dr Milton SF LIMA

  85. Laser surface remelting and hardening of an automotive shaft sing a high-power fiber laser

    Article • Materials Research, December 2007, FapUNIFESP (SciELO)

    Dr Milton SF LIMA

  86. Efficiency of the laser texturing on the adhesion of the coated twist drills

    Article • Journal of Materials Processing Technology, October 2006, Elsevier

    Dr Milton SF LIMA

  87. Optimization of titanium cutting by factorial analysis of the pulsed Nd:YAG laser parameters

    Article • Journal of Materials Processing Technology, October 2006, Elsevier

    Dr Milton SF LIMA

  88. Microstructural analyses of the nanoparticles obtained after laser irradiation of Ti and W in ethanol

    Article • Applied Surface Science, April 2006, Elsevier

    Dr Milton SF LIMA

  89. Laser beam welding of titanium nitride coated titanium using pulse-shaping

    Article • Materials Research, September 2005, FapUNIFESP (SciELO)

    Dr Milton SF LIMA

  90. Microstructure and surface properties of laser-remelted titanium nitride coatings on titanium

    Article • Surface and Coatings Technology, September 2005, Elsevier

    Dr Milton SF LIMA

  91. Cracking susceptibility of aluminum alloys during laser welding

    Article • Materials Research, June 2003, FapUNIFESP (SciELO)

    Dr Milton SF LIMA

  92. Microstructural changes due to laser ablation of oxidized surfaces on an AISI M2 tool steel

    Article • Materials Science and Engineering A, March 2003, Elsevier

    Dr Milton SF LIMA

  93. Massive transformation and absolute stability

    Article • Metallurgical and Materials Transactions A, August 2002, Springer Science + Business Media

    Dr Milton SF LIMA

  94. Elimination of Lubricants from Aluminum Cold Rolled Products Using Short Laser Pulses

    Article • Materials Research, June 2002, FapUNIFESP (SciELO)

    Dr Milton SF LIMA

  95. Structure of laser remelted surface of cast irons

    Article • Surface Engineering, April 2000, Taylor & Francis

    Dr Milton SF LIMA

  96. Morphological instability of the austenite growth front in a laser remelted iron–carbon–silicon alloy

    Article • Journal of Crystal Growth, January 2000, Elsevier

    Dr Milton SF LIMA

  97. Article • Journal of Materials Science Letters, January 2000, Springer Science + Business Media

    Dr Milton SF LIMA

  98. Determinación de la absorción de haz láser en ensayos de refusión en régimen continuo

    Article • Revista de Metalurgia, April 1998, Departmento de Publicaciones del CSIC

    Dr Milton SF LIMA

  99. Microstructure and mechanical properties of NiAl and NiAlB alloys produced by rapid solidification technique

    Article • Intermetallics, January 1996, Elsevier

    Dr Milton SF LIMA