Professor Dmitry G Eskin

All Stories

1. 
   Structure refinement, mechanical properties and feasibility of deformation of hypereutectic Al–Fe–Zr and Al–Ni–Zr alloys subjected to ultrasonic melt processing

   Article • Materials Science and Engineering A, June 2020, Elsevier

   Professor Dmitry G Eskin

2. 
   Structure Modification upon Ultrasonic Processing of an AA4032 Piston Alloy: Comparison of Permanent Mold and Direct-Chill Casting

   Article • Metallurgical and Materials Transactions A, December 2019, Springer Science + Business Media

   Professor Dmitry G Eskin

3. 
   Constitutive Behavior of an AA4032 Piston Alloy with Cu and Er Additions upon High-Temperature Compressive Deformation

   Article • Metallurgical and Materials Transactions A, October 2019, Springer Science + Business Media

   Professor Dmitry G Eskin

4. 
   Numerical Modelling of the Ultrasonic Treatment of Aluminium Melts: An Overview of Recent Advances

   Article • Materials, October 2019, MDPI AG

   Professor Dmitry G Eskin

5. 
   Influence of Titanium Diboride Particle Size on Structure and Mechanical Properties of an Al-Mg Alloy

   Article • Metals, September 2019, MDPI AG

   Professor Dmitry G Eskin

6. 
   Microstructure evolution in an Al-Si piston alloy under ultrasonic melt processing

   Article • IOP Conference Series Materials Science and Engineering, May 2019, Institute of Physics Publishing

   Professor Dmitry G Eskin

7. 
   Optimization of ultrasonic cavitation processing in the liquid melt flow

   Article • IOP Conference Series Materials Science and Engineering, May 2019, Institute of Physics Publishing

   Professor Dmitry G Eskin

8. 
   Optimizing the Conditions of Metal Solidification with Vibration

   Article • Metals, March 2019, MDPI AG

   Professor Dmitry G Eskin

9. 
   Numerical modelling of acoustic streaming during the ultrasonic melt treatment of direct-chill (DC) casting

   Article • Ultrasonics Sonochemistry, February 2019, Elsevier

   Professor Dmitry G Eskin

10. 
    Joint Effect of Ultrasonic Vibrations and Solid Metal Addition on the Grain Refinement of an Aluminium Alloy

    Article • Metals, February 2019, MDPI AG

    Professor Dmitry G Eskin

11. 
    Ultrasonic liquid metal processing: The essential role of cavitation bubbles in controlling acoustic streaming

    Article • Ultrasonics Sonochemistry, January 2019, Elsevier

    Professor Dmitry G Eskin

12. 
    Acoustic Cavitation Measurements and Modeling in Liquid Aluminum

    Article • January 2019, Springer Science + Business Media

    Professor Dmitry G Eskin

13. 
    Altering the Microstructure Morphology by Ultrasound Melt Processing During 6XXX Aluminium DC-Casting

    Article • January 2019, Springer Science + Business Media

    Professor Dmitry G Eskin

14. 
    Effect of Cu Addition on the Microstructure, Mechanical and Thermal Properties of a Piston Al-Si Alloy

    Article • January 2019, Springer Science + Business Media

    Professor Dmitry G Eskin

15. 
    Optimal Stator Design for Oxide Films Shearing Found by Physical Modelling

    Article • January 2019, Springer Science + Business Media

    Professor Dmitry G Eskin

16. 
    The formation of Fe Cu composite based on bimetallic nanoparticles

    Article • Vacuum, January 2019, Elsevier

    Professor Dmitry G Eskin

17. 
    Understanding the Highly Dynamic Phenomena in Ultrasonic Melt Processing by Ultrafast Synchrotron X-ray Imaging

    Article • January 2019, Springer Science + Business Media

    Professor Dmitry G Eskin

18. 
    Fundamental studies of ultrasonic melt processing

    Article • Ultrasonics Sonochemistry, December 2018, Elsevier

    Professor Dmitry G Eskin

19. 
    Microstructure and elevated temperature mechanical properties of a direct-chill cast AA4032 alloy with copper and erbium additions

    Article • Journal of Alloys and Compounds, December 2018, Elsevier

    Professor Dmitry G Eskin

20. 
    Validation of the Physical Simulations of a Stirred Molten Metal Using Particle Image Velocimetry Data

    Article • JOM, May 2018, Springer Science + Business Media

    Professor Dmitry G Eskin

21. 
    Experimental and numerical investigation of acoustic pressures in different liquids

    Article • Ultrasonics Sonochemistry, April 2018, Elsevier

    Koulis Pericleous, Professor Dmitry G Eskin

22. 
    Data and videos for ultrafast synchrotron X-ray imaging studies of metal solidification under ultrasound

    Article • Data in Brief, April 2018, Elsevier

    Professor Dmitry G Eskin

23. 
    3D characterisation of the Fe-rich intermetallic phases in recycled Al alloys by synchrotron X-ray microtomography and skeletonisation

    Article • Scripta Materialia, March 2018, Elsevier

    Dr Christian M Schlepuetz, Professor Dmitry G Eskin

24. 
    New insights into solidification and phase equilibria in the Al-Al 3 Zr system: Theoretical and experimental investigations

    Article • Journal of Alloys and Compounds, February 2018, Elsevier

    Professor Dmitry G Eskin

25. 
    In-situ synchrotron X-ray radiography observation of primary Al 2 Cu intermetallic growth on fragments of aluminium oxide film

    Article • Materials Letters, February 2018, Elsevier

    Professor Dmitry G Eskin

26. 
    Ultrafast synchrotron X-ray imaging studies of microstructure fragmentation in solidification under ultrasound

    Article • Acta Materialia, February 2018, Elsevier

    Professor Dmitry G Eskin

27. 
    Influence of scandium fluoride on the structure and phase composition of Al-Si alloy

    Article • MATEC Web of Conferences, January 2018, EDP Sciences

    Professor Dmitry G Eskin

28. 
    Basics of Solidification Processing of Metallic Alloys

    Article • January 2018, Springer Science + Business Media

    Professor Dmitry G Eskin

29. 
    High-Frequency Vibration and Ultrasonic Processing

    Article • January 2018, Springer Science + Business Media

    Professor Dmitry G Eskin

30. 
    Sc Applications in Aluminum Alloys: Overview of Russian Research in the 20th Century

    Article • January 2018, Springer Science + Business Media

    Professor Dmitry G Eskin

31. 
    Thermal Melt Processing of Metallic Alloys

    Article • January 2018, Springer Science + Business Media

    Professor Dmitry G Eskin

32. 
    A synchrotron X-radiography study of the fragmentation and refinement of primary intermetallic particles in an Al-35 Cu alloy induced by ultrasonic melt processing

    Article • Acta Materialia, December 2017, Elsevier

    Professor Dmitry G Eskin

33. 
    In situ observation of ultrasonic cavitation-induced fragmentation of the primary crystals formed in Al alloys

    Article • Ultrasonics Sonochemistry, November 2017, Elsevier

    Professor Dmitry G Eskin

34. 
    On the microstructural refinement in commercial purity Al and Al-10 wt% Cu alloy under ultrasonication during solidification

    Article • Materials & Design, October 2017, Elsevier

    Professor Dmitry G Eskin

35. 
    Role of ultrasonic treatment, inoculation and solute in the grain refinement of commercial purity aluminium

    Article • Scientific Reports, August 2017, Nature

    Professor Dmitry G Eskin, Professor Mark A Easton

36. 
    Prospects of In-Situ α-Al2O3 as an Inoculant in Aluminum: A Feasibility Study

    Article • Journal of Materials Engineering and Performance, August 2017, Springer Science + Business Media

    Professor Dmitry G Eskin

37. 
    Advanced Aluminum Alloys Containing Scandium

    Article • July 2017, Taylor & Francis

    Professor Dmitry G Eskin

38. 
    Numerical modelling of ultrasonic waves in a bubbly Newtonian liquid using a high-order acoustic cavitation model

    Article • Ultrasonics Sonochemistry, July 2017, Elsevier

    Koulis Pericleous, Professor Dmitry G Eskin

39. 
    Ultrasonic effect on the penetration of the metallic melt into submicron particles and their agglomerates

    Article • Russian Journal of Non-Ferrous Metals, July 2017, Allerton Press

    Professor Dmitry G Eskin

40. 
    Identifying the Stages during Ultrasonic Processing that Reduce the Grain Size of Aluminum with Added Al3Ti1B Master Alloy

    Article • Advanced Engineering Materials, May 2017, Wiley

    Professor Dmitry G Eskin

41. 
    On the occurrence of a eutectic-type structure in solidification of Al-Zr alloys

    Article • Scripta Materialia, May 2017, Elsevier

    Professor Dmitry G Eskin

42. 
    Influence of ultrasonic treatment on formation of primary Al 3 Zr in Al–0.4Zr alloy

    Article • Transactions of Nonferrous Metals Society of China, May 2017, Elsevier

    Professor Dmitry G Eskin

43. 
    Evaluation of Cavitation Erosion Behavior of Commercial Steel Grades Used in the Design of Fluid Machinery

    Article • Metallurgical and Materials Transactions A, March 2017, Springer Science + Business Media

    Professor Dmitry G Eskin

44. 
    Evaluation of Shearing Time Sufficient for Effective Liquid Metal Processing

    Article • JOM, March 2017, Springer Science + Business Media

    Professor Dmitry G Eskin

45. 
    Shaping and Forming Comes in All Shapes and Forms

    Article • JOM, February 2017, Springer Science + Business Media

    Professor Dmitry G Eskin

46. 
    Particle-induced morphological modification of Al alloy equiaxed dendrites revealed by sub-second in situ microtomography

    Article • Acta Materialia, February 2017, Elsevier

    Professor Dmitry G Eskin

47. 
    Characterizing the cavitation development and acoustic spectrum in various liquids

    Article • Ultrasonics Sonochemistry, January 2017, Elsevier

    Koulis Pericleous, Professor Dmitry G Eskin

48. 
    Effect of Ultrasonic Processing on a Direct Chill Cast AA6082 Aluminium Alloy

    Article • January 2017, Springer Science + Business Media

    Professor Dmitry G Eskin

49. 
    In Situ Observation of Fragmentation of Primary Crystals by Ultrasonic Cavitation in Water

    Article • January 2017, Springer Science + Business Media

    Professor Dmitry G Eskin

50. 
    Overview of Ultrasonic Degassing Development

    Article • January 2017, Springer Science + Business Media

    Professor Dmitry G Eskin

51. 
    Tensile mechanical properties, constitutive parameters and fracture characteristics of an as-cast AA7050 alloy in the near-solidus temperature regime

    Article • Materials Science and Engineering A, January 2017, Elsevier

    Professor Dmitry G Eskin

52. 
    Potential of an Al-Ti-MgAl2O4 Master Alloy and Ultrasonic Cavitation in the Grain Refinement of a Cast Aluminum Alloy

    Article • Metallurgical and Materials Transactions B, October 2016, Springer Science + Business Media

    Professor Dmitry G Eskin

53. 
    A New Al-Zr-Ti Master Alloy for Ultrasonic Grain Refinement of Wrought and Foundry Aluminum Alloys

    Article • JOM, October 2016, Springer Science + Business Media

    Professor Dmitry G Eskin

54. 
    A refining mechanism of primary Al 3 Ti intermetallic particles by ultrasonic treatment in the liquid state

    Article • Acta Materialia, September 2016, Elsevier

    Professor Dmitry G Eskin

55. 
    Synchrotron quantification of ultrasound cavitation and bubble dynamics in Al–10Cu melts

    Article • Ultrasonics Sonochemistry, July 2016, Elsevier

    Professor Dmitry G Eskin

56. 
    A model of cavitation for the treatment of a moving liquid metal volume

    Article • International Journal of Cast Metals Research, May 2016, Taylor & Francis

    Koulis Pericleous, Professor Dmitry G Eskin

57. 
    Fundamental studies on cavitation melt processing

    Article • IOP Conference Series Materials Science and Engineering, May 2016, Institute of Physics Publishing

    Koulis Pericleous, Professor Dmitry G Eskin

58. 
    Calibration and performance assessment of an innovative high-temperature cavitometer

    Article • Sensors and Actuators A Physical, April 2016, Elsevier

    Professor Dmitry G Eskin

59. 
    Ultrasonic processing of molten and solidifying aluminium alloys: overview and outlook

    Article • Materials Science and Technology, March 2016, Taylor & Francis

    Professor Dmitry G Eskin

60. 
    Characterisation of the ultrasonic acoustic spectrum and pressure field in aluminium melt with an advanced cavitometer

    Article • Journal of Materials Processing Technology, March 2016, Elsevier

    Koulis Pericleous, Professor Dmitry G Eskin

61. 
    Grain Refinement of an Al-2 wt%Cu Alloy by Al3Ti1B Master Alloy and Ultrasonic Treatment

    Article • IOP Conference Series Materials Science and Engineering, March 2016, Institute of Physics Publishing

    Professor Dmitry G Eskin

62. 
    Effect of ultrasonic melt treatment on the refinement of primary Al3Ti intermetallic in an Al–0.4Ti alloy

    Article • Journal of Crystal Growth, February 2016, Elsevier

    Professor Dmitry G Eskin

63. 
    Synchrotron radiographic studies of ultrasonic melt processing of metal matrix nano composites

    Article • Materials Letters, February 2016, Elsevier

    Professor Dmitry G Eskin

64. 
    Essential Readings in Light Metals

    Article • January 2016, Springer Science + Business Media

    Professor Dmitry G Eskin

65. 
    Investigation of the factors influencing cavitation intensity during the ultrasonic treatment of molten aluminium

    Article • Materials & Design, January 2016, Elsevier

    Koulis Pericleous, Professor Dmitry G Eskin

66. 
    A High-Order Acoustic Cavitation Model for the Treatment of a Moving Liquid Metal Volume

    Article • January 2016, Springer Science + Business Media

    Professor Dmitry G Eskin

67. 
    Kinetics of Ultrasonic Degassing of Aluminum Alloys

    Article • January 2016, Springer Science + Business Media

    Professor Dmitry G Eskin

68. 
    Comparison between low-order and high-order acoustic pressure solvers for bubbly media computations

    Article • Journal of Physics Conference Series, December 2015, Institute of Physics Publishing

    Koulis Pericleous, Professor Dmitry G Eskin

69. 
    Comparison of cavitation intensity in water and in molten aluminium using a high-temperature cavitometer

    Article • Journal of Physics Conference Series, December 2015, Institute of Physics Publishing

    Koulis Pericleous, Professor Dmitry G Eskin

70. 
    Effect of electroceramic particles on damping behaviour of aluminium hybrid composites produced by ultrasonic cavitation and mechanical stirring

    Article • Materials & Design, November 2015, Elsevier

    Professor Dmitry G Eskin

71. 
    In situ observation and analysis of ultrasonic capillary effect in molten aluminium

    Article • Ultrasonics Sonochemistry, November 2015, Elsevier

    Professor Dmitry G Eskin

72. 
    Dynamics of two interacting hydrogen bubbles in liquid aluminum under the influence of a strong acoustic field

    Article • Physical Review E, October 2015, American Physical Society (APS)

    Professor Dmitry G Eskin, Koulis Pericleous

73. 
    Effect of Input Power and Temperature on the Cavitation Intensity During the Ultrasonic Treatment of Molten Aluminium

    Article • Transactions of the Indian Institute of Metals, September 2015, Springer Science + Business Media

    Koulis Pericleous, Professor Dmitry G Eskin

74. 
    Effect of Zr additions and annealing temperature on electrical conductivity and hardness of hot rolled Al sheets

    Article • Transactions of Nonferrous Metals Society of China, September 2015, Elsevier

    Professor Dmitry G Eskin

75. 
    Ultrasonic Melt Processing: Achievements and Challenges

    Article • Materials Science Forum, August 2015, Trans Tech Publications

    Professor Dmitry G Eskin

76. 
    Development of New Oxide Based Master Alloys and their Grain Refinement Potency in Aluminium Alloys

    Article • Materials Science Forum, August 2015, Trans Tech Publications

    Professor Dmitry G Eskin

77. 
    Twin-Roll Casting after Intensive Melt Shearing and Subsequent Rolling of an AM30 Magnesium Alloy with Addition of CaO and SiC

    Article • Materials Science Forum, August 2015, Trans Tech Publications

    Professor Karl Ulrich Kainer, Professor Dmitry G Eskin, Dr Chamini L Mendis

78. 
    Application of a plate sonotrode to ultrasonic degassing of aluminum melt: Acoustic measurements and feasibility study

    Article • Journal of Materials Processing Technology, August 2015, Elsevier

    Professor Dmitry G Eskin

79. 
    Foreword

    Article • Metallurgical and Materials Transactions A, May 2015, Springer Science + Business Media

    Professor Dmitry G Eskin

80. 
    Development of Al-B-C Master Alloy Under External Fields

    Article • Metallurgical and Materials Transactions A, April 2015, Springer Science + Business Media

    Professor Dmitry G Eskin

81. 
    The Application of External Fields to the Manufacturing of Novel Dense Composite Master Alloys and Aluminum-Based Nanocomposites

    Article • Metallurgical and Materials Transactions A, March 2015, Springer Science + Business Media

    Professor Dmitry G Eskin

82. 
    Fabrication of a novel hybrid AlMg5/SiC/PLZT metal matrix composite produced by hot extrusion

    Article • Materials & Design (1980-2015), March 2015, Elsevier

    Professor Dmitry G Eskin

83. 
    Structure–property analysis of in-situ Al–MgAl2O4 metal matrix composites synthesized using ultrasonic cavitation

    Article • Materials Science and Engineering A, March 2015, Elsevier

    Professor Dmitry G Eskin

84. 
    The Physical-Mechanical and Electrical Properties of Cast Aluminum-Based Alloys Reinforced with Diamond Nanoparticles

    Article • Russian Physics Journal, March 2015, Springer Science + Business Media

    Professor Dmitry G Eskin

85. 
    In Situ Synchrotron Radiography of Ultrasound Cavitation in a Molten Al-10Cu Alloy

    Article • February 2015, Wiley

    Professor Dmitry G Eskin

86. 
    The Use of Alumina and Zirconia Nanopowders for Optimization of the Al-Based Light Alloys

    Article • February 2015, Wiley

    Professor Dmitry G Eskin

87. 
    Application of External Fields to the Development of Aluminum-Based Nanocomposite and Master Alloys

    Article • February 2015, Wiley

    Professor Dmitry G Eskin

88. 
    Structure and Casting Defects of Aluminum Billets Produced by Direct-Chill Casting

    Article • February 2015, Wiley

    Professor Dmitry G Eskin

89. 
    A Model of Cavitation for the Treatment of a Moving Liquid Metal Volume

    Article • February 2015, Wiley

    Professor Dmitry G Eskin

90. 
    Application of the "Full Cavitation Model" to the fundamental study of cavitation in liquid metal processing

    Article • IOP Conference Series Materials Science and Engineering, January 2015, Institute of Physics Publishing

    Professor Dmitry G Eskin, Koulis Pericleous

91. 
    Ultrasonic degassing of liquids

    Article • January 2015, Elsevier

    Professor Dmitry G Eskin

92. 
    Synthesis of Micro- and Nanoparticles of Metal Oxides and Their Application for Reinforcement of Al-Based Alloys

    Article • Advances in Materials Science and Engineering, January 2015, Hindawi Publishing Corporation

    Professor Dmitry G Eskin

93. 
    In Situ Synchrotron Radiography and Spectrum Analysis of Transient Cavitation Bubbles in Molten Aluminium Alloy

    Article • Physics Procedia, January 2015, Elsevier

    Koulis Pericleous, Professor Dmitry G Eskin

94. 
    Evaluation of effect of ultrasonic degassing on components produced by low pressure die casting

    Article • International Journal of Cast Metals Research, December 2014, Maney Publishing

    Professor Dmitry G Eskin

95. 
    The role of ultrasonic treatment in refining the as-cast grain structure during the solidification of an Al–2Cu alloy

    Article • Journal of Crystal Growth, December 2014, Elsevier

    Professor Dmitry G Eskin

96. 
    Ultrasonic Treatment of Light Alloy Melts

    Article • August 2014, Taylor & Francis

    Professor Dmitry G Eskin

97. 
    Ultrasonic degassing of aluminium alloys: basic studies and practical implementation

    Article • Materials Science and Technology, June 2014, Taylor & Francis

    Professor Dmitry G Eskin

98. 
    Ultrasonic Melt Processing: Opportunities and Misconceptions

    Article • Materials Science Forum, June 2014, Trans Tech Publications

    Professor Dmitry G Eskin

99. 
    Grain Refinement Efficiency of a New Oxide-Containing Master Alloy for Aluminium Casting Alloys

    Article • Materials Science Forum, June 2014, Trans Tech Publications

    Professor Dmitry G Eskin

100. 
     Incubation pit analysis and calculation of the hydrodynamic impact pressure from the implosion of an acoustic cavitation bubble

     Article • Ultrasonics Sonochemistry, March 2014, Elsevier

     Professor Dmitry G Eskin

101. 
     Formation of Hot Tear Under Controlled Solidification Conditions

     Article • Metallurgical and Materials Transactions A, February 2014, Springer Science + Business Media

     Professor Dmitry G Eskin

102. 
     Mechanisms and Control of Macrosegregation in DC Casting

     Article • February 2014, Wiley

     Professor Dmitry G Eskin

103. 
     Nanoparticles Distribution and Mechanical Properties of Aluminum-Matrix Nano-Composites Treated with External Fields

     Article • February 2014, Wiley

     Professor Dmitry G Eskin

104. 
     Processing of Metal Matrix Composites under External Fields and Their Application as Grain Refiner

     Article • February 2014, Wiley

     Professor Dmitry G Eskin

105. 
     Mechanisms and Control of Macrosegregation in Dc Casting

     Article • January 2014, Springer Science + Business Media

     Professor Dmitry G Eskin

106. 
     Linear Contraction Behavior of Low-Carbon, Low-Alloy Steels During and After Solidification Using Real-Time Measurements

     Article • Metallurgical and Materials Transactions A, November 2013, Springer Science + Business Media

     Professor Dmitry G Eskin

107. 
     Experimental Description and Process Simulation of Direct Chill (DC) Casting of Aluminum Alloys

     Article • October 2013, Wiley

     Professor Dmitry G Eskin

108. 
     Direct-Chill Casting of Light Alloys

     Article • July 2013, Wiley

     Professor Dmitry G Eskin

109. 
     Effect of Ultrasonic Melt Treatment on Degassing and Structure of Aluminium Alloys

     Article • Materials Science Forum, July 2013, Trans Tech Publications

     Professor Dmitry G Eskin

110. 
     Study of Mechanical Properties of an LM24 Composite Alloy Reinforced with Cu-CNT Nanofillers, Processed Using Ultrasonic Cavitation

     Article • Materials Science Forum, July 2013, Trans Tech Publications

     Professor Dmitry G Eskin

111. 
     Relationship Between Solidification Microstructure and Hot Cracking Susceptibility for Continuous Casting of Low-Carbon and High-Strength Low-Alloyed Steels: A Phase-Field Study

     Article • Metallurgical and Materials Transactions A, April 2013, Springer Science + Business Media

     Professor Dmitry G Eskin

112. 
     Cold Cracking during Direct-Chill Casting

     Article • April 2013, Wiley

     Professor Dmitry G Eskin

113. 
     On the Mechanism of Grain Refinement by Ultrasonic Melt Treatment in the Presence of Transition Metals

     Article • April 2013, Wiley

     Professor Dmitry G Eskin

114. 
     Effect of Grain Refining on Defect Formation in DC Cast Al-Zn-Mg-Cu Alloy Billet

     Article • April 2013, Wiley

     Professor Dmitry G Eskin

115. 
     Essential Readings in Light Metals

     Article • March 2013, Wiley

     Professor Dmitry G Eskin

116. 
     Application of External Fields to Technology of Metal-Matrix Composite Materials

     Article • February 2013, Wiley

     Professor Dmitry G Eskin

117. 
     Kinetics of Ultrasonic Degassing of Aluminum Alloys

     Article • February 2013, Wiley

     Professor Dmitry G Eskin

118. 
     PIV quantification of the flow induced by an ultrasonic horn and numerical modeling of the flow and related processing times

     Article • Ultrasonics Sonochemistry, January 2013, Elsevier

     Professor Dmitry G Eskin

119. 
     Solidification behaviour of an AA5754 Al alloy ingot cast with high impurity content

     Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), October 2012, Carl Hanser Verlag

     Professor Dmitry G Eskin

120. 
     Role of Solute and Transition Metals in Grain Refinement of Aluminum Alloys under Ultrasonic Melt Treatment

     Article • September 2012, Wiley

     Professor Dmitry G Eskin

121. 
     Influence of Melt Feeding Scheme and Casting Parameters During Direct-Chill Casting on Microstructure of an AA7050 Billet

     Article • Metallurgical and Materials Transactions B, August 2012, Springer Science + Business Media

     Professor Dmitry G Eskin

122. 
     High-Temperature Mechanical Behavior and Fracture Analysis of a Low-Carbon Steel Related to Cracking

     Article • Metallurgical and Materials Transactions A, August 2012, Springer Science + Business Media

     Professor Dmitry G Eskin

123. 
     Effect of inlet geometry on macrosegregation during the direct chill casting of 7050 alloy billets: experiments and computer modelling

     Article • IOP Conference Series Materials Science and Engineering, July 2012, Institute of Physics Publishing

     Professor Dmitry G Eskin

124. 
     Phase-field modelling of microstructure formation during the solidification of continuously cast low carbon and HSLA steels

     Article • IOP Conference Series Materials Science and Engineering, July 2012, Institute of Physics Publishing

     Professor Dmitry G Eskin

125. 
     Semi-quantitative predictions of hot tearing and cold cracking in aluminum DC casting using numerical process simulator

     Article • IOP Conference Series Materials Science and Engineering, July 2012, Institute of Physics Publishing

     Professor Dmitry G Eskin

126. 
     Formation of Microstructure in Al-Si Alloys under Ultrasonic Melt Treatment

     Article • May 2012, Wiley

     Professor Dmitry G Eskin

127. 
     Constitutive behaviour of an as-cast AA7050 alloy in the sub-solidus temperature range

     Article • IOP Conference Series Materials Science and Engineering, January 2012, Institute of Physics Publishing

     Professor Dmitry G Eskin

128. 
     Effect of V and N on the microstructure evolution during continuous casting of steel

     Article • IOP Conference Series Materials Science and Engineering, January 2012, Institute of Physics Publishing

     Professor Dmitry G Eskin

129. 
     Modeling of primary dendrite arm spacing variations in thin-slab casting of low carbon and low alloy steels

     Article • IOP Conference Series Materials Science and Engineering, January 2012, Institute of Physics Publishing

     Professor Dmitry G Eskin

130. 
     On the mechanism of the formation of primary intermetallics under ultrasonic melt treatment in an Al-Zr-Ti alloy

     Article • IOP Conference Series Materials Science and Engineering, January 2012, Institute of Physics Publishing

     Professor Dmitry G Eskin

131. 
     Structure and Defect Formation during DC Casting of Aluminium Alloys

     Article • Materials Science Forum, January 2012, Trans Tech Publications

     Professor Dmitry G Eskin

132. 
     International conference on aluminum alloys ICAA12

     Article • Metal Science and Heat Treatment, January 2012, Springer Science + Business Media

     Professor Dmitry G Eskin

133. 
     Recent trends in the science and technology of crystallization of aluminum alloys

     Article • Metal Science and Heat Treatment, January 2012, Springer Science + Business Media

     Professor Dmitry G Eskin

134. 
     Thermal expansion/contraction behavior of AA7050 alloy in the as-cast condition relevant to thermomechanical simulation of residual thermal stresses

     Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), October 2011, Carl Hanser Verlag

     Professor Dmitry G Eskin

135. 
     Cold Cracking during Direct-chill Casting

     Article • May 2011, Wiley

     Professor Dmitry G Eskin

136. 
     Contribution of forced centreline convection during direct chill casting of round billets to macrosegregation and structure of binary Al–Cu aluminium alloy

     Article • Materials Science and Technology, May 2011, Taylor & Francis

     Professor Dmitry G Eskin

137. 
     Influence of ultrasonic melt treatment on the formation of primary intermetallics and related grain refinement in aluminum alloys

     Article • Journal of Materials Science, March 2011, Springer Science + Business Media

     Professor Dmitry G Eskin

138. 
     Cold cracking in DC-cast high strength aluminum alloy ingots: An intrinsic problem intensified by casting process parameters

     Article • Materials Science and Engineering A, March 2011, Elsevier

     Professor Dmitry G Eskin

139. 
     On the mechanism of grain refinement in Al–Zr–Ti alloys

     Article • Journal of Alloys and Compounds, January 2011, Elsevier

     Professor Dmitry G Eskin

140. 
     Cold Cracking Development in AA7050 Direct Chill–Cast Billets under Various Casting Conditions

     Article • Metallurgical and Materials Transactions A, June 2010, Springer Science + Business Media

     Professor Dmitry G Eskin

141. 
     Application of a Criterion for Cold Cracking to Casting High Strength Aluminium Alloys

     Article • Materials Science Forum, June 2010, Trans Tech Publications

     Professor Dmitry G Eskin

142. 
     Criteria of Grain Refinement Induced by Ultrasonic Melt Treatment of Aluminum Alloys Containing Zr and Ti

     Article • Metallurgical and Materials Transactions A, May 2010, Springer Science + Business Media

     Professor Dmitry G Eskin

143. 
     Factors affecting thermal contraction behavior of an AA7050 alloy

     Article • Materials Science and Engineering A, May 2010, Elsevier

     Professor Dmitry G Eskin

144. 
     Microstructural features of intergranular brittle fracture and cold cracking in high strength aluminum alloys

     Article • Materials Science and Engineering A, March 2010, Elsevier

     Professor Dmitry G Eskin

145. 
     Numerical Simulation of Residual Thermal Stresses in AA7050 Alloy during DC-Casting Using ALSIM5

     Article • Advanced Materials Research, January 2010, Trans Tech Publications

     Professor Dmitry G Eskin

146. 
     Cold-Cracking Assessment in AA7050 Billets during Direct-Chill Casting by Thermomechanical Simulation of Residual Thermal Stresses and Application of Fracture Mechanics

     Article • Metallurgical and Materials Transactions A, October 2009, Springer Science + Business Media

     Professor Dmitry G Eskin

147. 
     Different grain morphologies in grain-refined 7075 billet

     Article • Materials Science and Technology, October 2009, Taylor & Francis

     Professor Dmitry G Eskin

148. 
     Grain refinement of an Al–10% Mg alloy by intensive shearing in the liquid state

     Article • Journal of Alloys and Compounds, October 2009, Elsevier

     Professor Dmitry G Eskin

149. 
     Macrosegregation Mechanisms in Direct-Chill Casting of Aluminium Alloys

     Article • Materials Science Forum, October 2009, Trans Tech Publications

     Professor Dmitry G Eskin

150. 
     Numerical issues in modelling macrosegregation during DC casting of a multi‐component aluminium alloy

     Article • International Journal of Numerical Methods for Heat &amp Fluid Flow, September 2009, Emerald

     Professor Dmitry G Eskin

151. 
     Solidification phenomena related to direct chill casting of aluminium alloys: fundamental studies and future challenges

     Article • Materials Technology, September 2009, Taylor & Francis

     Professor Dmitry G Eskin

152. 
     Effect of controlled forced convection on macrosegregation and structure in direct-chill casting of an aluminium alloy

     Article • International Journal of Cast Metals Research, August 2009, Maney Publishing

     Professor Dmitry G Eskin

153. 
     Influence of dendrite arrangement on coarsening during solidification of high-solute Al alloys

     Article • International Journal of Cast Metals Research, August 2009, Maney Publishing

     Professor Dmitry G Eskin

154. 
     Temperature effects in aluminium melts due to cavitation induced by high power ultrasound

     Article • International Journal of Cast Metals Research, August 2009, Maney Publishing

     Professor Dmitry G Eskin

155. 
     Fracture behavior and mechanical properties of high strength aluminum alloys in the as-cast condition

     Article • Materials Science and Engineering A, December 2008, Elsevier

     Professor Dmitry G Eskin

156. 
     Structural factors of dendritic segregation in aluminum alloys

     Article • Russian Journal of Non-Ferrous Metals, October 2008, Allerton Press

     Professor Dmitry G Eskin

157. 
     An efficient technique for describing a multi-component open system solidification path

     Article • Calphad, September 2008, Elsevier

     Professor Dmitry G Eskin

158. 
     In-Situ Analysis of Coarsening during Directional Solidification Experiments in High-Solute Aluminum Alloys

     Article • Metallurgical and Materials Transactions B, August 2008, Springer Science + Business Media

     Professor Dmitry G Eskin

159. 
     Physical Metallurgy of Direct Chill Casting of Aluminum Alloys

     Article • April 2008

     Professor Dmitry G Eskin

160. 
     Effect of different grain structures on centerline macrosegregation during direct-chill casting

     Article • Acta Materialia, April 2008, Elsevier

     Professor Dmitry G Eskin

161. 
     Scale Rules for Macrosegregation during Direct-Chill Casting of Aluminum Alloys

     Article • Metallurgical and Materials Transactions A, March 2008, Springer Science + Business Media

     Professor Dmitry G Eskin

162. 
     Macrosegregation in direct-chill casting of aluminium alloys

     Article • Progress in Materials Science, March 2008, Elsevier

     Professor Dmitry G Eskin

163. 
     Numerical Evaluation of Cyclone Application for Impurities Removal from Molten Aluminum

     Article • Metallurgical and Materials Transactions B, February 2008, Springer Science + Business Media

     Professor Dmitry G Eskin

164. 
     Solute transport and phase composition in an Al–Mg–Si alloy solidified under conditions of forced flow

     Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), January 2008, Carl Hanser Verlag

     Professor Dmitry G Eskin

165. 
     Effect of Grain Refinement on Structure Evolution, “Floating” Grains, and Centerline Macrosegregation in Direct-Chill Cast AA2024 Alloy Billets

     Article • Metallurgical and Materials Transactions A, December 2007, Springer Science + Business Media

     Professor Dmitry G Eskin

166. 
     Role of grain refining in hot cracking and macrosegregation in direct chill cast AA 7075 billets

     Article • Materials Science and Technology, November 2007, Taylor & Francis

     Professor Dmitry G Eskin

167. 
     Unsteady-State Solidification under Forced Flow Conditions

     Article • October 2007, CrossRef Test Account

     Professor Dmitry G Eskin

168. 
     Effect of Structure on Hot Tearing Properties of Aluminum Alloys

     Article • October 2007, CrossRef Test Account

     Professor Dmitry G Eskin

169. 
     3D Microstructure Development during Unconstrained Solidification of Aluminum Alloys

     Article • October 2007, CrossRef Test Account

     Professor Dmitry G Eskin

170. 
     Experimental Study of Grain Growth in Aluminium Melts under the Influence of Ultrasonic Melt Treatment

     Article • October 2007, CrossRef Test Account

     Professor Dmitry G Eskin

171. 
     Unsteady-State Solidification under Forced Flow Conditions

     Article • Materials Science Forum, October 2007, Trans Tech Publications

     Professor Dmitry G Eskin

172. 
     Effect of Structure on Hot Tearing Properties of Aluminum Alloys

     Article • Materials Science Forum, October 2007, Trans Tech Publications

     Professor Dmitry G Eskin

173. 
     3D Microstructure Development during Unconstrained Solidification of Aluminum Alloys

     Article • Materials Science Forum, October 2007, Trans Tech Publications

     Professor Dmitry G Eskin

174. 
     Experimental Study of Grain Growth in Aluminium Melts under the Influence of Ultrasonic Melt Treatment

     Article • Materials Science Forum, October 2007, Trans Tech Publications

     Professor Dmitry G Eskin

175. 
     In situ observations of dendritic fragmentation due to local solute-enrichment during directional solidification of an aluminum alloy

     Article • Acta Materialia, August 2007, Elsevier

     Professor Dmitry G Eskin

176. 
     Solidification under Forced-Flow Conditions in a Shallow Cavity

     Article • Metallurgical and Materials Transactions A, June 2007, Springer Science + Business Media

     Professor Dmitry G Eskin

177. 
     Feathery grain growth during solidification under forced flow conditions

     Article • Acta Materialia, June 2007, Elsevier

     Professor Dmitry G Eskin

178. 
     A Quest for a New Hot Tearing Criterion

     Article • Metallurgical and Materials Transactions A, May 2007, Springer Science + Business Media

     Professor Dmitry G Eskin

179. 
     Two-dimensional modelling and experimental study on microsegregation during solidification of an Al–Cu binary alloy

     Article • Acta Materialia, March 2007, Elsevier

     Professor Dmitry G Eskin

180. 
     Modeling Macrosegregation during Direct-Chill Casting of Multicomponent Aluminum Alloys

     Article • Metallurgical and Materials Transactions A, January 2007, Springer Science + Business Media

     Professor Dmitry G Eskin

181. 
     Relationship between shrinkage-induced macrosegregation and the sump profile upon direct-chill casting

     Article • Scripta Materialia, October 2006, Elsevier

     Professor Dmitry G Eskin

182. 
     Effect of Al3Ni and Mg2Si Eutectic Phases on Casting Properties and Hardening of an Al-7% Zn-3% Mg Alloy

     Article • July 2006, CrossRef Test Account

     Professor Dmitry G Eskin

183. 
     Optimization of hardening of Al–Zr–Sc cast alloys

     Article • Journal of Materials Science, July 2006, Springer Science + Business Media

     Professor Dmitry G Eskin

184. 
     Thermal Contraction during Solidification of Aluminium Alloys

     Article • Materials Science Forum, July 2006, Trans Tech Publications

     Professor Dmitry G Eskin

185. 
     3D Microstructure Reconstruction of Aluminium Alloys Quenched during Solidification

     Article • Materials Science Forum, July 2006, Trans Tech Publications

     Professor Dmitry G Eskin

186. 
     Thermal strain in the mushy zone for aluminum alloys

     Article • Metallurgical and Materials Transactions A, July 2006, Springer Science + Business Media

     Professor Dmitry G Eskin

187. 
     Role of Grain Refining in Macrosegregation upon Direct Chill Casting of AA 2024 Round Billet

     Article • Materials Science Forum, July 2006, Trans Tech Publications

     Professor Dmitry G Eskin

188. 
     Effects of Solidification Range on the Structure of Aluminium Alloys Obtained under Conditions of Constant Melt Flow

     Article • Materials Science Forum, July 2006, Trans Tech Publications

     Professor Dmitry G Eskin

189. 
     Effect of Al3Ni and Mg2Si Eutectic Phases on Casting Properties and Hardening of an Al-7% Zn-3% Mg Alloy

     Article • Materials Science Forum, July 2006, Trans Tech Publications

     Professor Dmitry G Eskin

190. 
     Experimental Study of Linear Shrinkage during Solidification of Binary and Commercial Aluminum Alloys

     Article • April 2006, Wiley

     Professor Dmitry G Eskin

191. 
     Thermal Contraction of AA5182 for Prediction of Ingot Distortions

     Article • March 2006, CrossRef Test Account

     Professor Dmitry G Eskin

192. 
     Constitutive Equation for Thermal Strain in the Mushy Zone during Solidification of Aluminium Alloys

     Article • March 2006, CrossRef Test Account

     Professor Dmitry G Eskin

193. 
     Structure observations related to hot tearing of Al–Cu billets produced by direct-chill casting

     Article • Materials Science and Engineering A, March 2006, Elsevier

     Professor Dmitry G Eskin

194. 
     Thermal Contraction of AA5182 for Prediction of Ingot Distortions

     Article • Key Engineering Materials, March 2006, Trans Tech Publications

     Professor Dmitry G Eskin

195. 
     Constitutive Equation for Thermal Strain in the Mushy Zone during Solidification of Aluminium Alloys

     Article • Materials Science Forum, March 2006, Trans Tech Publications

     Professor Dmitry G Eskin

196. 
     Effect of melt flow on macro- and microstructure evolution during solidification of an Al–4.5% Cu alloy

     Article • Materials Science and Engineering A, December 2005, Elsevier

     Professor Dmitry G Eskin

197. 
     The effect of ramping casting speed and casting temperature on temperature distribution and melt flow patterns in the sump of a DC cast billet

     Article • Materials Science and Engineering A, December 2005, Elsevier

     Professor Dmitry G Eskin

198. 
     Constituent phase diagrams of the Al–Cu–Fe–Mg–Ni–Si system and their application to the analysis of aluminium piston alloys

     Article • Acta Materialia, October 2005, Elsevier

     Professor Dmitry G Eskin

199. 
     Experimental study of structure formation in binary Al–Cu alloys at different cooling rates

     Article • Materials Science and Engineering A, September 2005, Elsevier

     Professor Dmitry G Eskin

200. 
     Alloys with Nickel

     Article • January 2005, Elsevier

     Professor Dmitry G Eskin

201. 
     Alloys with Lithium

     Article • January 2005, Elsevier

     Professor Dmitry G Eskin

202. 
     Alloys with Transition Metals

     Article • January 2005, Elsevier

     Professor Dmitry G Eskin

203. 
     Alloys of the Al–Fe–Mn–Si System

     Article • January 2005, Elsevier

     Professor Dmitry G Eskin

204. 
     Alloys of the Al–Mg–Mn–Si–Fe System

     Article • January 2005, Elsevier

     Professor Dmitry G Eskin

205. 
     Alloys of the Al–Cu–Mn–(Mg, Fe, Si) System

     Article • January 2005, Elsevier

     Professor Dmitry G Eskin

206. 
     Alloys with a High Content of Zinc

     Article • January 2005, Elsevier

     Professor Dmitry G Eskin

207. 
     Composite Materials with SiC, Al2O3, and SiO2

     Article • January 2005, Elsevier

     Professor Dmitry G Eskin

208. 
     Alloys of the Al–Mg–Si–Fe System

     Article • January 2005, Elsevier

     Professor Dmitry G Eskin

209. 
     Alloys of the Al–Cu–Si–(Mg, Fe) System

     Article • January 2005, Elsevier

     Professor Dmitry G Eskin

210. 
     Structure formation and macrosegregation under different process conditions during DC casting

     Article • Materials Science and Engineering A, October 2004, Elsevier

     Professor Dmitry G Eskin

211. 
     Development of thermal strain in the coherent mushy zone during solidification of aluminum alloys

     Article • Metallurgical and Materials Transactions A, September 2004, Springer Science + Business Media

     Professor Dmitry G Eskin

212. 
     Some control mechanisms of spatial solidification in light alloys

     Article • Zeitschrift für Metallkunde, August 2004, Carl Hanser Verlag

     Professor Dmitry G Eskin

213. 
     Mechanical properties in the semi-solid state and hot tearing of aluminium alloys

     Article • Progress in Materials Science, January 2004, Elsevier

     Professor Dmitry G Eskin

214. 
     Improving the properties of cold-rolled Al–6%Ni sheets by alloying and heat treatment

     Article • Scripta Materialia, January 2004, Elsevier

     Professor Dmitry G Eskin

215. 
     First stages of grain coarsening in semi-solid Al?Cu alloys

     Article • Scripta Materialia, October 2003, Elsevier

     Professor Dmitry G Eskin

216. 
     Production of natural and synthesized aluminum-based composite materials with the aid of ultrasonic (cavitation) treatment of the melt

     Article • Ultrasonics Sonochemistry, July 2003, Elsevier

     Professor Dmitry G Eskin

217. 
     Article • Journal of Materials Science, January 2003, Springer Science + Business Media

     Professor Dmitry G Eskin

218. 
     Effects of Ultrasonic (Cavitation) Melt Processing on the Structure Refinement and Property Improvement of Cast and Worked Aluminum Alloys

     Article • Materials Science Forum, July 2002, Trans Tech Publications

     Professor Dmitry G Eskin

219. 
     Hardening and Precipitation in the Al-Cu-Mg-Si Alloying System

     Article • Materials Science Forum, July 2002, Trans Tech Publications

     Professor Dmitry G Eskin

220. 
     The Al-Cu-Fe-Mg-Si Phase Diagram in the Range of Al-Cu Alloys

     Article • Materials Science Forum, July 2002, Trans Tech Publications

     Professor Dmitry G Eskin

221. 
     Primary Solidification in Aluminum Alloys under Melt Overheating

     Article • Materials Science Forum, May 2000, Trans Tech Publications

     Professor Dmitry G Eskin

222. 
     Casting alloys of the Al–Ce–Ni system: microstructural approach to alloy design

     Article • Materials Science and Engineering A, November 1999, Elsevier

     Professor Dmitry G Eskin

223. 
     Article • Journal of Materials Science, January 1999, Springer Science + Business Media

     Professor Dmitry G Eskin

224. 
     Precipitation hardening in ternary alloys of the AlScCu and AlScSi systems

     Article • Acta Metallurgica et Materialia, July 1994, Elsevier

     Professor Dmitry G Eskin

225. 
     In Search of the Prediction of Hot Cracking in Aluminium Alloys

     Article • Springer Science + Business Media

     Professor Dmitry G Eskin

226. 
     10.4028/0-87849-408-1.1681

     Article • CrossRef Test Account

     Professor Dmitry G Eskin

227. 
     10.4028/0-87849-408-1.1707

     Article • CrossRef Test Account

     Professor Dmitry G Eskin

228. 
     10.4028/0-87849-408-1.1789

     Article • CrossRef Test Account

     Professor Dmitry G Eskin

229. 
     10.4028/0-87849-408-1.1841

     Article • CrossRef Test Account

     Professor Dmitry G Eskin