All Stories

  1. Effect of ultrasonic melt treatment on intermetallic phase formation in a manganese-modified Al-17Si-2Fe alloy

    Article • Journal of Materials Processing Technology, September 2019, Elsevier

    Professor Mark A Easton

  2. Solidification path and microstructure evolution of Mg-3Al-14La alloy: Implications for the Mg-rich corner of the Mg-Al-La phase diagram

    Article • Journal of Alloys and Compounds, May 2019, Elsevier

    Professor Mark A Easton

  3. Effect of building direction on porosity and fatigue life of selective laser melted AlSi12Mg alloy

    Article • Materials Science and Engineering A, June 2018, Elsevier

    Professor Mark A Easton

  4. Influence of macrosegregation on solidification cracking in laser clad ultra-high strength steels

    Article • Surface and Coatings Technology, April 2018, Elsevier

    Professor Mark A Easton

  5. Refining As-cast β-Ti Grains Through ZrN Inoculation

    Article • Metallurgical and Materials Transactions A, March 2018, Springer Science + Business Media

    Professor Mark A Easton

  6. Metal Alloys for Fusion-Based Additive Manufacturing

    Article • Advanced Engineering Materials, February 2018, Wiley

    Professor Mark A Easton

  7. Development of Magnesium-Rare Earth Die-Casting Alloys

    Article • January 2018, Springer Science + Business Media

    Professor Mark A Easton

  8. Experimental Study of the Solidification Microstructure in the Mg-Rich Corner of Mg–Al–Ce System

    Article • January 2018, Springer Science + Business Media

    Professor Mark A Easton

  9. In-situ quench and tempering for microstructure control and enhanced mechanical properties of laser cladded AISI 420 stainless steel powder on 300M steel substrates

    Article • Surface and Coatings Technology, January 2018, Elsevier

    Professor Mark A Easton

  10. Anelasticity of die-cast magnesium-aluminium based alloys under different strain rates

    Article • Materials Science and Engineering A, November 2017, Elsevier

    Professor Mark A Easton

  11. The Effect of Ultrasonic Melt Treatment on Macro-Segregation and Peritectic Transformation in an Al-19Si-4Fe Alloy

    Article • Metallurgical and Materials Transactions A, September 2017, Springer Science + Business Media

    Professor Mark A Easton

  12. Role of ultrasonic treatment, inoculation and solute in the grain refinement of commercial purity aluminium

    Article • Scientific Reports, August 2017, Nature

    Professor Dmitry G Eskin, Professor Mark A Easton

  13. Strain-rate sensitivity of die-cast magnesium-aluminium based alloys

    Article • Materials Science and Engineering A, June 2017, Elsevier

    Professor Mark A Easton

  14. Modeling and simulation of microstructural evolution in Zr based Bulk Metallic Glass Matrix Composites during solidification

    Article • MRS Advances, January 2017, Cambridge University Press

    Muhammad Musaddique Ali Rafique, Professor Mark A Easton, Dr. Muhammad Musaddique Ali Rafique

  15. Performance Evaluation of High-Pressure Die-Cast Magnesium Alloys

    Article • January 2017, Springer Science + Business Media

    Professor Mark A Easton

  16. The influence of minor Mn additions on creep resistance of die-cast Mg–Al–RE alloys

    Article • Materials Science and Engineering A, January 2017, Elsevier

    Professor Mark A Easton

  17. Effect of Strain Rate on Mechanical Behaviour of Commercial Die-Cast Magnesium Alloys

    Article • January 2017, The Minerals, Metals and Materials Society

    Professor Mark A Easton

  18. Proof stress measurement of die-cast magnesium alloys

    Article • Materials & Design, December 2016, Elsevier

    Professor Mark A Easton

  19. On the microstructural factors affecting creep resistance of die-cast Mg–La-rare earth (Nd, Y or Gd) alloys

    Article • Materials Science and Engineering A, October 2016, Elsevier

    Professor Mark A Easton

  20. Microstructure and hardness characterisation of laser coatings produced with a mixture of AISI 420 stainless steel and Fe-C-Cr-Nb-B-Mo steel alloy powders

    Article • Surface and Coatings Technology, June 2016, Elsevier

    Professor Mark A Easton

  21. Selective laser melting (SLM) of AlSi12Mg lattice structures

    Article • Materials & Design, May 2016, Elsevier

    Professor Mark A Easton

  22. The effect of the melt thermal gradient on the size of the constitutionally supercooled zone

    Article • IOP Conference Series Materials Science and Engineering, March 2016, Institute of Physics Publishing

    Professor Mark A Easton

  23. Age hardening in die-cast Mg–Al–RE alloys due to minor Mn additions

    Article • Materials Science and Engineering A, February 2016, Elsevier

    Professor Mark A Easton

  24. Recent advances in grain refinement of light metals and alloys

    Article • Current Opinion in Solid State and Materials Science, February 2016, Elsevier

    Professor Mark A Easton

  25. The Influence of Individual Rare Earth Elements (La, Ce, or Nd) on Creep Resistance of Die-Cast Magnesium Alloy AE44 

    Article • February 2016, Wiley

    Professor Mark A Easton

  26. Effects of quench rate and natural ageing on the age hardening behaviour of aluminium alloy AA6060

    Article • Materials Characterization, January 2016, Elsevier

    Professor Mark A Easton

  27. An Initial Assessment of the Effects of Increased Ni and V Content in A356 and AA6063 Alloys

    Article • January 2016, Springer Science + Business Media

    Professor Mark A Easton

  28. Evaluation of Magnesium Die-Casting Alloys for Elevated Temperature Applications: Castability 

    Article • November 2015, Wiley

    Professor Mark A Easton

  29. Achievements in Magnesium Alloy Research

    Article • Materials Science Forum, August 2015, Trans Tech Publications

    Professor Mark A Easton

  30. On the Solute Diffusion Length in the Interdependence Model: Dendritic versus Non-Dendritic Interface

    Article • Materials Science Forum, August 2015, Trans Tech Publications

    Professor Peter D Lee, David StJohn, Professor Mark A Easton

  31. The Contribution of Constitutional Supercooling to Nucleation and Grain Formation

    Article • Metallurgical and Materials Transactions A, May 2015, Springer Science + Business Media

    Professor Mark A Easton

  32. Characterization and Formation of Rod-Shaped (Al,Si)3Ti Particles in an Al-7Si-0.35Mg-0.12Ti (Wt Pct) Alloy

    Article • Metallurgical and Materials Transactions A, May 2015, Springer Science + Business Media

    Professor Mark A Easton

  33. Evaluation of Magnesium Die-Casting Alloys for Elevated Temperature Applications: Microstructure, Tensile Properties, and Creep Resistance

    Article • Metallurgical and Materials Transactions A, May 2015, Springer Science + Business Media

    Professor Mark A Easton

  34. The Influence of Iron, Manganese, and Zirconium on the Corrosion of Magnesium: An Artificial Neural Network Approach

    Article • CORROSION, February 2015, NACE International

    Professor Mark A Easton

  35. The Influence of the Effect of Solute on the Thermodynamic Driving Force on Grain Refinement of Al Alloys

    Article • Metallurgical and Materials Transactions A, October 2014, Springer Science + Business Media

    Professor Mark A Easton

  36. Deformation Behavior of the Percolating Eutectic Intermetallic in HPDC and Squeeze-Cast Mg Alloys

    Article • JOM, September 2014, Springer Science + Business Media

    Professor Mark A Easton

  37. Effects of Cooling Rate and Solute Content on the Grain Refinement of Mg-Gd-Y Alloys by Aluminum

    Article • Metallurgical and Materials Transactions A, July 2014, Springer Science + Business Media

    Professor Mark A Easton

  38. Crystallographic study of Al3Zr and Al3Nb as grain refiners for Al alloys

    Article • Transactions of Nonferrous Metals Society of China, July 2014, Elsevier

    Professor Mark A Easton

  39. The Strength of the Spatially Interconnected Eutectic Network in HPDC Mg-La, Mg-Nd, and Mg-La-Nd Alloys

    Article • Metallurgical and Materials Transactions A, June 2014, Springer Science + Business Media

    Professor Mark A Easton

  40. The Grain Refinement of Al-Si Alloys and the Cause of Si Poisoning: Insights Revealed by the Interdependence Model

    Article • Materials Science Forum, June 2014, Trans Tech Publications

    Professor Mark A Easton

  41. Microstructure and property evaluation of high-pressure die-cast Mg–La–rare earth (Nd, Y or Gd) alloys

    Article • Journal of Alloys and Compounds, June 2014, Elsevier

    Professor Mark A Easton

  42. Strengthening Micromechanisms in Cold-Chamber High-Pressure Die-Cast Mg-Al Alloys

    Article • Metallurgical and Materials Transactions A, May 2014, Springer Science + Business Media

    Professor Mark A Easton

  43. An A Priori Hot-Tearing Indicator Applied to Die-Cast Magnesium-Rare Earth Alloys

    Article • Metallurgical and Materials Transactions A, April 2014, Springer Science + Business Media

    Professor Mark A Easton

  44. Strengthening by the percolating intergranular eutectic in an HPDC Mg–Ce alloy

    Article • Materials Science and Engineering A, April 2014, Elsevier

    Professor Mark A Easton

  45. On the unexpected formation of rare earth hydrides in magnesium–rare earth casting alloys

    Article • Scripta Materialia, April 2014, Elsevier

    Professor Mark A Easton

  46. The influence of zirconium additions on the corrosion of magnesium

    Article • Corrosion Science, April 2014, Elsevier

    Professor Mark A Easton

  47. Crystallographic study of grain refinement of Al by Nb addition

    Article • Journal of Applied Crystallography, March 2014, International Union of Crystallography

    Professor Mark A Easton

  48. Controlling initial biodegradation of magnesium by a biocompatible strontium phosphate conversion coating

    Article • Acta Biomaterialia, March 2014, Elsevier

    Professor Mark A Easton

  49. Magnesium for Crashworthy Components

    Article • February 2014, Wiley

    Professor Mark A Easton

  50. The Effect of Trace Levels of Ni and V on the Microstructure and Properties of Four Common Aluminum Alloys

    Article • February 2014, Wiley

    Professor Mark A Easton

  51. Grain Refinement of Aluminium Alloys: Recent Developments in Predicting the As-Cast Grain Size of Alloys Refined by Al-Ti-B Master Alloys

    Article • February 2014, Wiley

    Professor Mark A Easton

  52. Precipitation process in a Mg–Gd–Y alloy grain-refined by Al addition

    Article • Materials Characterization, February 2014, Elsevier

    Professor Mark A Easton

  53. CALPHAD simulation of the Mg–(Mn, Zr)–Fe system and experimental comparison with as-cast alloy microstructures as relevant to impurity driven corrosion of Mg-alloys

    Article • Materials Chemistry and Physics, February 2014, Elsevier

    Professor Mark A Easton

  54. Corrosion protection of magnesium and its alloys by metal phosphate conversion coatings

    Article • Surface Engineering, December 2013, Taylor & Francis

    Xiaobo Chen, Professor Mark A Easton

  55. Heat treatment of vacuum high pressure die cast magnesium alloy AZ91

    Article • International Journal of Cast Metals Research, December 2013, Maney Publishing

    Professor Mark A Easton

  56. Optimising the Cost of Grain Refinement by Separate TiB2and Ti Additions to Wrought Aluminium Alloys

    Article • October 2013, Wiley

    Professor Mark A Easton

  57. The grain refinement mechanism of cast aluminium by zirconium

    Article • Acta Materialia, September 2013, Elsevier

    Professor Mark A Easton

  58. A microplasticity-based definition of the skin in HPDC Mg–Al alloys

    Article • Materials Science and Engineering A, September 2013, Elsevier

    Professor Mark A Easton

  59. The development of the skin in HPDC Mg–Al alloys

    Article • Materials Science and Engineering A, September 2013, Elsevier

    Professor Mark A Easton

  60. Heat treatment, microstructure and mechanical properties of a Mg–Gd–Y alloy grain-refined by Al additions

    Article • Materials Science and Engineering A, August 2013, Elsevier

    Professor Mark A Easton

  61. Analysis of the creep behaviour of die-cast Mg–3Al–1Si alloy

    Article • Materials Science and Engineering A, August 2013, Elsevier

    Professor Mark A Easton

  62. Influence of Mn and Zr on the Corrosion of Al-Free Mg Alloys: Part 2—Impact of Mn and Zr on Mg Alloy Electrochemistry and Corrosion

    Article • CORROSION, August 2013, NACE International

    Professor Mark A Easton

  63. A Brief History of the Grain Refinement of Cast Light Alloys

    Article • Materials Science Forum, July 2013, Trans Tech Publications

    Professor Mark A Easton

  64. Modelling Eutectic Growth in Unmodified and Modified Near-Eutectic Al-Si Alloy

    Article • Materials Science Forum, July 2013, Trans Tech Publications

    Professor Mark A Easton

  65. Practical Considerations on the Application of Ultrasonic Treatment to Mg-Al Shape Castings

    Article • Materials Science Forum, July 2013, Trans Tech Publications

    Professor Mark A Easton

  66. Influence of Mn and Zr on the Corrosion of Al-Free Mg Alloys: Part 1—Electrochemical Behavior of Mn and Zr

    Article • CORROSION, July 2013, NACE International

    Professor Mark A Easton

  67. The role of Al2Y in grain refinement in Mg–Al–Y alloy system

    Article • Journal of Magnesium and Alloys, June 2013, Elsevier

    Professor Mark A Easton

  68. A new multi-zone model for porosity distribution in Al–Si alloy castings

    Article • Acta Materialia, May 2013, Elsevier

    Professor Mark A Easton

  69. The Effect of Alloy Content on the Grain Refinement of Aluminium Alloys

    Article • April 2013, Wiley

    Professor Mark A Easton

  70. An Initial Assessment of the Effects of Increased Ni and V Content in A356 and AA6063 Alloys

    Article • February 2013, Wiley

    Professor Mark A Easton

  71. Influences of Nickel and Vanadium Impurities on Microstructure of Aluminum Alloys

    Article • JOM, February 2013, Springer Science + Business Media

    Professor Mark A Easton

  72. Thermodynamics of Phase Formation in Mg-La-Ce-Nd Alloys

    Article • February 2013, Wiley

    Professor Mark A Easton

  73. Double-layered manganese phosphate conversion coating on magnesium alloy AZ91D: Insights into coating formation, growth and corrosion resistance

    Article • Surface and Coatings Technology, February 2013, Elsevier

    Professor Mark A Easton

  74. Revisiting the role of peritectics in grain refinement of Al alloys

    Article • Acta Materialia, January 2013, Elsevier

    Professor Mark A Easton

  75. Corrosion-resistant coatings for magnesium (Mg) alloys

    Article • January 2013, Elsevier

    Professor Mark A Easton

  76. Corrosion-resistant electrochemical plating of magnesium (Mg) alloys

    Article • January 2013, Elsevier

    Professor Mark A Easton

  77. Grain Refinement of Magnesium Alloys by Mg-Zr Master Alloys: The Role of Alloy Chemistry and Zr Particle Number Density

    Article • Advanced Engineering Materials, December 2012, Wiley

    Professor Mark A Easton

  78. Hot Tear Susceptibility of Al-Mg-Si-Fe Alloys with Varying Iron Contents

    Article • Metallurgical and Materials Transactions A, December 2012, Springer Science + Business Media

    Professor Mark A Easton

  79. The Effect of Solidification Dynamics on the Formation of the Skin in Die Cast Mg-Al and Mg-RE Alloys

    Article • Advanced Engineering Materials, November 2012, Wiley

    Professor Mark A Easton

  80. Grain Refinement of Magnesium Alloys: A Review of Recent Research, Theoretical Developments, and Their Application

    Article • Metallurgical and Materials Transactions A, November 2012, Springer Science + Business Media

    Professor Mark A Easton

  81. Grain refinement of Mg–10Gd alloy by Al additions

    Article • Journal of Materials Research, October 2012, Cambridge University Press

    Professor Mark A Easton

  82. The Interdependence Model: An Improved Predictor of Grain Size

    Article • September 2012, Wiley

    Professor Mark A Easton

  83. The Effect of Natural Aging on Quench Sensitivity in Al-Mg-Si Alloys

    Article • September 2012, Wiley

    Professor Mark A Easton

  84. Phase analysis of Mg–La–Nd and Mg–La–Ce alloys

    Article • Intermetallics, September 2012, Elsevier

    Professor Mark A Easton

  85. Feeding and Distribution of Porosity in Cast Al-Si Alloys as Function of Alloy Composition and Modification

    Article • Metallurgical and Materials Transactions A, July 2012, Springer Science + Business Media

    Professor Mark A Easton

  86. Microstructure and Creep Behavior of High-Pressure Die-Cast Magnesium Alloy AE44

    Article • Metallurgical and Materials Transactions A, June 2012, Springer Science + Business Media

    Professor Mark A Easton

  87. Corrosion-Resistant Electrochemical Platings on Magnesium Alloys: A State-of-the-Art Review

    Article • CORROSION, June 2012, NACE International

    Professor Mark A Easton

  88. Magnesium: Engineering the Surface

    Article • JOM, June 2012, Springer Science + Business Media

    Professor Mark A Easton

  89. The role of crystallography and thermodynamics on phase selection in binary magnesium–rare earth (Ce or Nd) alloys

    Article • Acta Materialia, June 2012, Elsevier

    Professor Mark A Easton

  90. Observation and Prediction of the Hot Tear Susceptibility of Ternary Al-Si-Mg Alloys

    Article • Metallurgical and Materials Transactions A, May 2012, Springer Science + Business Media

    Professor Mark A Easton

  91. The skin effect and the yielding behavior of cold chamber high pressure die cast Mg–Al alloys

    Article • Materials Science and Engineering A, April 2012, Elsevier

    Professor Mark A Easton

  92. Microstructural characterization of high pressure die cast Mg-Zn-Al-RE alloys

    Article • Materials Characterization, March 2012, Elsevier

    Professor Mark A Easton

  93. The influence of Zn additions on the microstructure and creep resistance of high pressure die cast magnesium alloy AE44

    Article • Materials Science and Engineering A, March 2012, Elsevier

    Professor Mark A Easton

  94. Low-strain plasticity in a high pressure die cast Mg–Al alloy

    Article • Modelling and Simulation in Materials Science and Engineering, February 2012, Institute of Physics Publishing

    Professor Mark A Easton

  95. A solidification model for unmodified, Na-modified and Sr-modified Al-Si alloys

    Article • IOP Conference Series Materials Science and Engineering, January 2012, Institute of Physics Publishing

    Professor Mark A Easton

  96. The Application of Magnesium Alloys to the Lightweighting of Automotive Structures

    Article • January 2012, Springer Science + Business Media

    Professor Mark A Easton

  97. Casting Defects and Mechanical Properties of High Pressure Die Cast Mg-Zn-Al-RE Alloys

    Article • Advanced Engineering Materials, September 2011, Wiley

    Professor Mark A Easton

  98. Control and Removal of Impurities from Al Melts: A Review

    Article • Materials Science Forum, July 2011, Trans Tech Publications

    Professor Mark A Easton

  99. Hot Tearing in Al-Mg-Si Alloys with Minor Additions of Cu or Mn

    Article • Materials Science Forum, July 2011, Trans Tech Publications

    Professor Mark A Easton

  100. The Interdependence Theory: The relationship between grain formation and nucleant selection

    Article • Acta Materialia, July 2011, Elsevier

    Professor Mark A Easton

  101. Castability of some Magnesium Alloys in a Novel Castability Die

    Article • Materials Science Forum, June 2011, Trans Tech Publications

    Professor Mark A Easton

  102. Effects of Heat Treatment on a High-Pressure Die-Cast Mg-La-Y Alloy

    Article • Materials Science Forum, June 2011, Trans Tech Publications

    Professor Mark A Easton

  103. Introduction to the Interdependence Theory of Grain Formation and its Application to Aluminium, Magnesium and Titanium Alloys

    Article • Materials Science Forum, June 2011, Trans Tech Publications

    Professor Mark A Easton

  104. Thermodynamic Analysis of As-cast and Heat Treated Microstructures of Mg-Ce-Nd Alloys

    Article • April 2011, Wiley

    Professor Mark A Easton

  105. The Effect of Iron Content on the Iron-Containing Intermetallic Phases in a Cast 6060 Aluminum Alloy

    Article • Metallurgical and Materials Transactions A, January 2011, Springer Science + Business Media

    Professor Mark A Easton

  106. Grain Morphology of As-Cast Wrought Aluminium Alloys

    Article • MATERIALS TRANSACTIONS, January 2011, Japan Institute of Metals

    Professor Mark A Easton

  107. Relating Quench Sensitivity to Microstructure in 6000 Series Aluminium Alloys

    Article • MATERIALS TRANSACTIONS, January 2011, Japan Institute of Metals

    Professor Mark A Easton

  108. Thermodynamic analysis of as-cast and heat-treated microstructures of Mg–Ce–Nd alloys

    Article • Acta Materialia, January 2011, Elsevier

    Professor Mark A Easton

  109. A combined neural network and mechanistic approach for the prediction of corrosion rate and yield strength of magnesium-rare earth alloys

    Article • Corrosion Science, January 2011, Elsevier

    Professor Mark A Easton

  110. The skin effect in a high pressure die cast Mg-RE alloy

    Article • Kovove Materialy-Metallic Materials, January 2011, AEPress, s.r.o.

    Professor Mark A Easton

  111. Case studies in aluminium casting alloys

    Article • January 2011, Elsevier

    Professor Mark A Easton

  112. Failure modes during uniaxial deformation of magnesium alloy AZ31B tubes

    Article • International Journal of Mechanical Sciences, December 2010, Elsevier

    Professor Mark A Easton

  113. The relationship between microstructure and creep resistance in die-cast magnesium–rare earth alloys

    Article • Scripta Materialia, October 2010, Elsevier

    Professor Mark A Easton

  114. Dispersoid Phases in 6xxx Series Aluminium Alloys

    Article • Materials Science Forum, June 2010, Trans Tech Publications

    Professor Mark A Easton

  115. The Skin Effect in an Mg-RE High Pressure Die Cast Alloy

    Article • Materials Science Forum, June 2010, Trans Tech Publications

    Professor Mark A Easton

  116. The Influence of Eutectic Morphology on the Impact Properties of High Pressure Die Cast Mg-Rare-Earth Alloys

    Article • Materials Science Forum, June 2010, Trans Tech Publications

    Professor Mark A Easton

  117. An analytical model for constitutional supercooling-driven grain formation and grain size prediction

    Article • Acta Materialia, May 2010, Elsevier

    Professor Mark A Easton

  118. Evaluation of castability of high pressure die cast magnesium based alloys

    Article • International Journal of Cast Metals Research, April 2010, Maney Publishing

    Professor Mark A Easton

  119. Effect of Alloy Composition on the Dendrite Arm Spacing of Multicomponent Aluminum Alloys

    Article • Metallurgical and Materials Transactions A, February 2010, Springer Science + Business Media

    Professor Mark A Easton

  120. Cross-Sectional Geometry and the Intermetallics Structure in a High Pressure Die Cast Mg-Al Alloy

    Article • Materials Science Forum, January 2010, Trans Tech Publications

    Professor Mark A Easton

  121. Solute Content and the Grain Microstructure of High Pressure Diecast Magnesium–Aluminium Alloys

    Article • Advanced Engineering Materials, November 2009, Wiley

    Professor Mark A Easton

  122. Grain Refinement and Hot Tearing of Aluminium Alloys - How to Optimise and Minimise

    Article • Materials Science Forum, October 2009, Trans Tech Publications

    Professor Mark A Easton

  123. Elevated temperature mechanical properties and microstructures of high pressure die cast magnesium AZ91 alloy cast with different section thicknesses

    Article • Materials Science and Engineering A, October 2009, Elsevier

    Professor Mark A Easton

  124. Performance of wrought aluminium and magnesium alloy tubes in three-point bending

    Article • Materials & Design (1980-2015), August 2009, Elsevier

    Professor Mark A Easton

  125. The effect of alloy composition on the microstructure and tensile properties of binary Mg-rare earth alloys

    Article • Intermetallics, July 2009, Elsevier

    Professor Mark A Easton

  126. Primary Creep of Die-Cast Magnesium–Rare Earth Based Alloys

    Article • Metallurgical and Materials Transactions A, June 2009, Springer Science + Business Media

    Professor Mark A Easton

  127. Influence of SiC Particles on the Grain Refinement of an Mg-Al Alloy

    Article • Materials Science Forum, April 2009, Trans Tech Publications

    Professor Mark A Easton

  128. On the Creep Resistance of HPDC Mg-RE Based Alloys

    Article • Materials Science Forum, April 2009, Trans Tech Publications

    Professor Mark A Easton

  129. Role of Solute Content on the Intermetallic Structure Development in HPDC Mg-Al Binary Alloys

    Article • Materials Science Forum, April 2009, Trans Tech Publications

    Professor Mark A Easton

  130. Compressive strain-rate sensitivity of magnesium–aluminum die casting alloys

    Article • Materials & Design (1980-2015), March 2009, Elsevier

    Professor Mark A Easton

  131. Calculated phase diagrams and the corrosion of die-cast Mg–Al alloys

    Article • Corrosion Science, March 2009, Elsevier

    Professor Mark A Easton, Andrej Atrens

  132. On the corrosion of binary magnesium-rare earth alloys

    Article • Corrosion Science, March 2009, Elsevier

    Professor Mark A Easton

  133. Magnesium alloy applications in automotive structures

    Article • JOM, November 2008, Springer Science + Business Media

    Professor Mark A Easton

  134. Controlling the Semisolid Grain Size during Solidification

    Article • Solid State Phenomena, July 2008, Trans Tech Publications

    Professor Mark A Easton

  135. Improved prediction of the grain size of aluminum alloys that includes the effect of cooling rate

    Article • Materials Science and Engineering A, July 2008, Elsevier

    Professor Mark A Easton

  136. Microstructural analysis of the creep resistance of die-cast Mg–4Al–2RE alloy

    Article • Scripta Materialia, March 2008, Elsevier

    Professor Mark A Easton

  137. A New Analytical Approach to Reveal the Mechanisms of Grain Refinement

    Article • Advanced Engineering Materials, September 2007, Wiley

    Professor Mark A Easton

  138. New approach to analysis of grain refinement

    Article • International Journal of Cast Metals Research, June 2007, Maney Publishing

    Professor Mark A Easton

  139. Effect of Solidification Grain Refinement on the Development of Wrought Mg Alloys

    Article • March 2007, CrossRef Test Account

    Professor Mark A Easton

  140. Effect of Solidification Grain Refinement on the Development of Wrought Mg Alloys

    Article • Materials Science Forum, March 2007, Trans Tech Publications

    Professor Mark A Easton

  141. Grain refinement of Mg–Al(–Mn) alloys by SiC additions

    Article • Scripta Materialia, August 2006, Elsevier

    Professor Mark A Easton

  142. The Effect of Grain Refinement and Cooling Rate on the Hot Tearing of Wrought Aluminium Alloys

    Article • Materials Science Forum, July 2006, Trans Tech Publications

    Professor Mark A Easton

  143. The effect of chemical grain refinement and low superheat pouring on the structure of NRC castings of aluminium alloy Al–7Si–0.4Mg

    Article • Materials Science and Engineering A, March 2006, Elsevier

    Professor Mark A Easton

  144. A comparison of the deformation of magnesium alloys with aluminium and steel in tension, bending and buckling

    Article • Materials & Design (1980-2015), January 2006, Elsevier

    Professor Mark A Easton

  145. Grain refinement of magnesium alloys

    Article • Metallurgical and Materials Transactions A, July 2005, Springer Science + Business Media

    Professor Mark A Easton

  146. An analysis of the relationship between grain size, solute content, and the potency and number density of nucleant particles

    Article • Metallurgical and Materials Transactions A, July 2005, Springer Science + Business Media

    Professor Mark A Easton

  147. Crystallographic study of grain refinement in aluminum alloys using the edge-to-edge matching model

    Article • Acta Materialia, March 2005, Elsevier

    Professor Mark A Easton

  148. Designing with Magnesium

    Article • November 2003, Taylor & Francis

    Professor Mark A Easton

  149. Mechanical Behaviour of Cast Magnesium Alloys

    Article • Materials Science Forum, March 2003, Trans Tech Publications

    Professor Mark A Easton

  150. The Effect of Microstructural Features and Defects on the Ductility of High Pressure Die Cast AS21, AM60 and AZ91

    Article • Materials Science Forum, March 2003, Trans Tech Publications

    Professor Mark A Easton

  151. A model of grain refinement incorporating alloy constitution and potency of heterogeneous nucleant particles

    Article • Acta Materialia, June 2001, Elsevier

    Professor Mark A Easton

  152. Partitioning of titanium during solidification of aluminium alloys

    Article • Materials Science and Technology, September 2000, Taylor & Francis

    Professor Mark A Easton

  153. The effect of grain refinement on the formation of casting defects in alloy 356 castings

    Article • International Journal of Cast Metals Research, May 2000, Taylor & Francis

    Professor Mark A Easton

  154. Grain refinement of aluminum alloys: Part II. Confirmation of, and a mechanism for, the solute paradigm

    Article • Metallurgical and Materials Transactions A, June 1999, Springer Science + Business Media

    Professor Mark A Easton

  155. Grain refinement of aluminum alloys: Part I. the nucleant and solute paradigms—a review of the literature

    Article • Metallurgical and Materials Transactions A, June 1999, Springer Science + Business Media

    Professor Mark A Easton

  156. 10.4028/0-87849-408-1.1675

    Article • CrossRef Test Account

    Professor Mark A Easton