All Stories

  1. Effect of Soil Characteristics on the Physico-mechanical Properties of Non-stabilized Compressed Earth Blocks
  2. Self-Compacting Cementitious Composites with Heavy Fuel Fly Ash Replacement
  3. Micro-destructive evaluation of the mechanical properties of lime-based mortars
  4. An experimental approach for the investigation of the performance of non-stabilized Compressed Earth Blocks (CEBs) against water-mediated weathering
  5. Engineered Cementitious Composites for the Conservation of 20<sup>th</sup> Century Concrete Architectural Heritage
  6. Improving the carbonation of air lime mortars at ambient conditions via the incorporation of ball-milled quarry waste
  7. State of Conservation of Concrete Heritage Buildings: A European Screening
  8. Influence of microencapsulated Phase Change Materials (PCMs) on the properties of polymer modified cementitious repair mortar
  9. Durability performance of non-stabilized Compressed Earth Blocks with optimized granular composition
  10. Iron-Stimulated Production and Antimicrobial Potential of a Novel Biosurfactant Produced by a Drilling Waste-Degrading Pseudomonas citronellolis Strain
  11. The influence of ophiolitic crushed fine aggregate properties on the performance of cement mortars
  12. Assessing the quality of concrete – reinforcement interface in Self Compacting Concrete
  13. Physico-mechanical characterization of non-stabilized Compressed Earth Blocks
  14. Use of Ultrafine Mafic Rocks for the Enhancement of Carbonation Reaction in Lime Renders
  15. Comparative evaluation of a novel environmentally responsive modular wall system based on integrated quantitative and qualitative criteria
  16. Correlations between the Properties of Crushed Fine Aggregates
  17. Earth masonry
  18. Sustainable exploitation of mafic rock quarry waste for carbon sequestration following ball milling
  19. Ball Milling Effect on the CO2 Uptake of Mafic and Ultramafic Rocks: A Review
  20. Thermal performance and embodied energy of standard and retrofitted wall systems encountered in Southern Europe
  21. Effect of ball milling on the carbon sequestration efficiency of serpentinized peridotites
  22. Carbon sequestration via enhanced weathering of peridotites and basalts in seawater
  23. Towards a more effective and reliable salt crystallization test for porous building materials: state of the art
  24. Validation of the repair effectiveness of clay-based grout injections by lateral load testing of an adobe model building
  25. The temperature variation of the water sorptivity of construction materials
  26. Comparison of adobes from pre-history to-date
  27. On the potential use of quarry waste material for CO2 sequestration
  28. Effect of fly ash chemical composition on the reinforcement corrosion, thermal diffusion and strength of blended cement concretes
  29. Amelioration of crushed brick - lime composites using nano-additives
  30. Enhancing the rate of ex situ mineral carbonation in dunites via ball milling
  31. Cradle to site Life Cycle Assessment (LCA) of adobe bricks
  32. Mechanical properties and durability performance of reinforced concrete containing fly ash
  33. Micro-destructive mapping of the salt crystallization front in limestone
  34. Micro-destructive cutting techniques for the characterization of natural limestone
  35. A method to enhance the CO2 storage capacity of pyroxenitic rocks
  36. Carbon dioxide storage in olivine basalts: Effect of ball milling process
  37. Laboratory testing and finite element simulation of the structural response of an adobe masonry building under horizontal loading
  38. A Study of Fine Aggregate Properties and Their Effect on the Quality of Cementitious Composite Materials
  39. Adobe bricks under compression: Experimental investigation and derivation of stress–strain equation
  40. New evidence of early use of artificial pozzolanic material in mortars
  41. Testing the soundness of aggregates using different methodologies
  42. Overview of the Pathology, Repair and Strengthening of Adobe Structures
  43. Durability performance of self-compacting concrete
  44. In-situ measurement of liquid phase moisture in cement mortar
  45. A study of the mechanical behaviour of adobe masonry
  46. Crushed limestone as an aggregate in concrete production: the Cyprus case
  47. Adobe: an environmentally friendly construction material
  48. Towards more sustainable and environmentally-friendly concretes: the use of silica fume
  49. Use of crushed fired clay ceramics in the production of mortars
  50. Application of the Sharp Front Model to capillary absorption in a vuggy limestone
  51. Capillary absorption of water and n-decane by autoclaved aerated concrete
  52. Water repellent influence on salt crystallisation in masonry
  53. Synchrotron radiation energy-dispersive X-ray diffraction analysis of salt distribution in Lépine limestone
  54. On the role of organic adlayers in the anomalous water sorptivity of Lépine limestone
  55. Direct measurement of the wetting front capillary pressure in a clay brick ceramic
  56. Finite Element Analysis of Adobe Masonry using Experimentally Derived Material Data