All Stories

  1. Unifying the size effect observed in micropillar compression experiments

    Article • The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics, February 2024, Taylor & Francis

    Brian Derby

  2. Graphene-Based Transparent Flexible Strain Gauges with Tunable Sensitivity and Strain Range

    Article • ACS Applied Nano Materials, November 2023, American Chemical Society (ACS)

    Brian Derby

  3. Low Energy Twist Defects in Pentatwinned Silver Nanowires

    Article • Advanced Engineering Materials, August 2023, Wiley

    Brian Derby

  4. Stability Bounds for Micron Scale Ag Conductor Lines Produced by Electrohydrodynamic Inkjet Printing

    Article • ACS Applied Materials & Interfaces, August 2022, American Chemical Society (ACS)

    Brian Derby

  5. Brittle Behavior in Aspirin Crystals: Evidence of Spalling Fracture

    Article • Crystal Growth & Design, January 2021, American Chemical Society (ACS)

    Brian Derby

  6. Stability of Lines with Zero Receding Contact Angle Produced by Inkjet Printing at Small Drop Volume

    Article • Langmuir, January 2021, American Chemical Society (ACS)

    Brian Derby

  7. Probing anisotropic mechanical behaviour in carbamazepine form III

    Article • CrystEngComm, January 2021, Royal Society of Chemistry

    Brian Derby

  8. Impact of polymorphism on mechanical properties of molecular crystals: a study of p-amino and p-nitro benzoic acid with nanoindentation

    Article • CrystEngComm, January 2021, Royal Society of Chemistry

    Brian Derby

  9. Fabrication of microvascular constructs using high resolution electrohydrodynamic inkjet printing

    Article • Biofabrication, December 2020, Institute of Physics Publishing

    Brian Derby

  10. Isomechanical Groups in Molecular Crystals and Role of Aromatic Interactions

    Article • Crystal Growth & Design, October 2020, American Chemical Society (ACS)

    Brian Derby

  11. High-Power Energy Storage from Carbon Electrodes Using Highly Acidic Electrolytes

    Article • The Journal of Physical Chemistry C, September 2020, American Chemical Society (ACS)

    Brian Derby

  12. Fluid/Fiber Interactions and the Conductivity of Inkjet Printed Ag on Textile Substrates

    Article • ACS Applied Materials & Interfaces, September 2020, American Chemical Society (ACS)

    Brian Derby

  13. Nanoindentation of Molecular Crystals: Lessons Learned from Aspirin

    Article • Crystal Growth & Design, August 2020, American Chemical Society (ACS)

    Brian Derby

  14. Water-based highly conductive graphene inks for fully printed humidity sensors

    Article • Journal of Physics D Applied Physics, July 2020, Institute of Physics Publishing

    Brian Derby

  15. Probing Ink-Powder Interactions During 3D Binderjet Printing Using Time Resolved X-Ray Imaging

    Article • ACS Applied Materials & Interfaces, June 2020, American Chemical Society (ACS)

    Brian Derby

  16. The systemic influence of chronic smoking on skin structure and mechanical function

    Article • The Journal of Pathology, June 2020, Wiley

    Brian Derby

  17. Tiled Monolayer Films of 2D Molybdenum Disulphide Nanoflakes Assembled at Liquid/Liquid Interfaces

    Article • ACS Applied Materials & Interfaces, May 2020, American Chemical Society (ACS)

    Brian Derby

  18. Fatigue and the electrical resistance of silver nanowire networks

    Article • Scripta Materialia, May 2020, Elsevier

    Brian Derby

  19. Oil-in-water separation with graphene-based nanocomposite membranes for produced water treatment

    Article • Journal of Membrane Science, May 2020, Elsevier

    Brian Derby

  20. Patterned, morphing composites via maskless photo-click lithography

    Article • Soft Matter, January 2020, Royal Society of Chemistry

    Brian Derby

  21. The formation mechanism of hexagonal Mo2C defects in CVD graphene grown on liquid copper

    Article • Physical Chemistry Chemical Physics, January 2020, Royal Society of Chemistry

    Brian Derby

  22. Direct 3D printing of graphene using capillary suspensions

    Article • Nanoscale, January 2020, Royal Society of Chemistry

    Brian Derby

  23. Chemical vapour deposition of graphene on copper–nickel alloys: the simulation of a thermodynamic and kinetic approach

    Article • Nanoscale, January 2020, Royal Society of Chemistry

    Brian Derby

  24. Acoustic Poration and Dynamic Healing of Mammalian Cell Membranes during Inkjet Printing

    Article • ACS Biomaterials Science & Engineering, December 2019, American Chemical Society (ACS)

    Brian Derby

  25. Geometrical Constraints on the Bending Deformation of Penta-Twinned Silver Nanowires

    Article • Acta Materialia, November 2019, Elsevier

    Brian Derby, Chris Race

  26. Light-Induced Molecular Adsorption of Proteins Using the PRIMO System for Micro-Patterning to Study Cell Responses to Extracellular Matrix Proteins

    Article • Journal of Visualized Experiments, October 2019, MyJove Corporation

    Brian Derby

  27. Screen-Printing of a Highly Conductive Graphene Ink for Flexible Printed Electronics

    Article • ACS Applied Materials & Interfaces, August 2019, American Chemical Society (ACS)

    Brian Derby

  28. Estrogen mediates acute elastic fibre homeostasis in skin

    Article • August 2019, Cold Spring Harbor Laboratory Press

    Brian Derby

  29. The size dependent strength of Fe, Nb and V micropillars at room and low temperature

    Article • Materialia, August 2019, Elsevier

    Brian Derby

  30. Angiogenesis and tissue formation driven by an arteriovenous loop in the mouse

    Article • Scientific Reports, July 2019, Springer Science + Business Media

    Brian Derby

  31. Distinct matrix composition and mechanics in aged and estrogen-deficient mouse skin

    Article • March 2019, Cold Spring Harbor Laboratory Press

    Brian Derby

  32. Experimental study of the parameters for stable drop-on-demand inkjet performance

    Article • Physics of Fluids, March 2019, American Institute of Physics

    Brian Derby, YUANYUAN LIU

  33. Synthetic 2-D lead tin sulfide nanosheets with tuneable optoelectronic properties from a potentially scalable reaction pathway

    Article • Chemical Science, January 2019, Royal Society of Chemistry

    Brian Derby

  34. A definition of bioinks and their distinction from biomaterial inks

    Article • Biofabrication, October 2018, Institute of Physics Publishing

    Brian Derby, Professor Tim B. F. Woodfield

  35. 3D printing of materials with spatially non-linearly varying properties

    Article • Materials & Design, October 2018, Elsevier

    Brian Derby

  36. Structural, Mechanical, Imaging and in Vitro Evaluation of the Combined Effect of Gd3+ and Dy3+ in the ZrO2–SiO2 Binary System

    Article • Inorganic Chemistry, April 2018, American Chemical Society (ACS)

    Brian Derby

  37. Biofabrication: A Guide to Technology and Terminology

    Article • Trends in Biotechnology, April 2018, Elsevier

    Professor Tim B. F. Woodfield , Brian Derby

  38. Supercapacitor Electrodes from the in Situ Reaction between Two-Dimensional Sheets of Black Phosphorus and Graphene Oxide

    Article • ACS Applied Materials & Interfaces, March 2018, American Chemical Society (ACS)

    Brian Derby

  39. Interdependence of Resistance and Optical Transmission in Conductive Nanowire Networks

    Article • Advanced Theory and Simulations, January 2018, Wiley

    Brian Derby

  40. Fully printed high performance humidity sensors based on two-dimensional materials

    Article • Nanoscale, January 2018, Royal Society of Chemistry

    Brian Derby

  41. Black phosphorus with near-superhydrophobic properties and long-term stability in aqueous media

    Article • Chemical Communications, January 2018, Royal Society of Chemistry

    Brian Derby, Andrew Thomas

  42. Two-Step Electrochemical Intercalation and Oxidation of Graphite for the Mass Production of Graphene Oxide

    Article • Journal of the American Chemical Society, November 2017, American Chemical Society (ACS)

    Brian Derby

  43. Implication of Free Fatty Acids in Thrombin Generation and Fibrinolysis in Vascular Inflammation in Zucker Rats and Evolution with Aging

    Article • Frontiers in Physiology, November 2017, Frontiers

    Brian Derby

  44. Controlling Coffee Ring Formation during Drying of Inkjet Printed 2D Inks

    Article • Advanced Materials Interfaces, September 2017, Wiley

    Brian Derby

  45. Rising to the challenge: applying biofabrication approaches for better drug and chemical product development

    Article • Biofabrication, July 2017, Institute of Physics Publishing

    Brian Derby

  46. Inkjet printing ultra-large graphene oxide flakes

    Article • 2D Materials, March 2017, Institute of Physics Publishing

    Brian Derby

  47. Tetragonal to Cubic Transformation of SiO2-Stabilized ZrO2 Polymorph through Dysprosium Substitutions

    Article • Inorganic Chemistry, January 2017, American Chemical Society (ACS)

    Brian Derby

  48. Stabilization of a t-ZrO2 polymorph in a glassy SiO2 matrix at elevated temperatures accomplished by ceria additions

    Article • Dalton Transactions, January 2017, Royal Society of Chemistry

    Brian Derby

  49. Integrating Cell Sheets for Organ-on-a-chip Applications

    Article • Procedia CIRP, January 2017, Elsevier

    Brian Derby

  50. Solution processing of two-dimensional black phosphorus

    Article • Chemical Communications, January 2017, Royal Society of Chemistry

    Brian Derby

  51. Peptide hydrogelin vitronon-inflammatory potential

    Article • Journal of Peptide Science, December 2016, Wiley

    Brian Derby, Professor Iain Alexander Bruce

  52. Frequency-modulated atomic force microscopy localises viscoelastic remodelling in the ageing sheep aorta

    Article • Journal of the Mechanical Behavior of Biomedical Materials, December 2016, Elsevier

    Brian Derby

  53. An ex vivo porcine skin model to evaluate pressure-reducing devices of different mechanical properties used for pressure ulcer prevention

    Article • Wound Repair and Regeneration, October 2016, Wiley

    Brian Derby

  54. Pristine Graphene Aerogels by Room-Temperature Freeze Gelation

    Article • Advanced Materials, July 2016, Wiley

    Brian Derby

  55. A pilot study of scanning acoustic microscopy as a tool for measuring arterial stiffness in aortic biopsies

    Article • Artery Research, March 2016, Elsevier

    Brian Derby

  56. Biofabrication: reappraising the definition of an evolving field

    Article • Biofabrication, January 2016, Institute of Physics Publishing

    Professor Tim B. F. Woodfield , Brian Derby

  57. Tin(II) Sulfide (SnS) Nanosheets by Liquid-Phase Exfoliation of Herzenbergite: IV–VI Main Group Two-Dimensional Atomic Crystals

    Article • Journal of the American Chemical Society, October 2015, American Chemical Society (ACS)

    Brian Derby

  58. Mechanical properties of porous ceramic scaffolds: Influence of internal dimensions

    Article • Ceramics International, August 2015, Elsevier

    Brian Derby

  59. Biomechanical Changes of Collagen Cross-Linking on Human Keratoconic Corneas Using Scanning Acoustic Microscopy

    Article • Current Eye Research, June 2015, Taylor & Francis

    Brian Derby

  60. Additive Manufacture of Ceramics Components by Inkjet Printing

    Article • Engineering, March 2015, Elsevier

    Brian Derby

  61. High throughput cryopreservation of cells by rapid freezing of sub-μl drops using inkjet printing – cryoprinting

    Article • Lab on a Chip, January 2015, Royal Society of Chemistry

    Brian Derby

  62. Localized micro- and nano-scale remodelling in the diabetic aorta

    Article • Acta Biomaterialia, November 2014, Elsevier

    Brian Derby

  63. Combining AFM and Acoustic Probes to Reveal Changes in the Elastic Stiffness Tensor of Living Cells

    Article • Biophysical Journal, October 2014, Elsevier

    Brian Derby

  64. Inkjet printing biomaterials for tissue engineering: bioprinting

    Article • International Materials Reviews, July 2014, Taylor & Francis

    Brian Derby

  65. Influence of specimen thickness on the nanoindentation of hydrogels: Measuring the mechanical properties of soft contact lenses

    Article • Journal of the Mechanical Behavior of Biomedical Materials, July 2014, Elsevier

    Brian Derby

  66. When the Drop Hits the Substrate

    Article • May 2014, Wiley

    Brian Derby

  67. Biomechanical Changes After Repeated Collagen Cross-Linking on Human Corneas Assessed In Vitro Using Scanning Acoustic Microscopy

    Article • Investigative Ophthalmology & Visual Science, March 2014, Association for Research in Vision and Ophthalmology (ARVO)

    Brian Derby

  68. Wide-Area Strain Sensors based upon Graphene-Polymer Composite Coatings Probed by Raman Spectroscopy

    Article • Advanced Functional Materials, February 2014, Wiley

    Brian Derby

  69. Growth differentiation factor 6 and transforming growth factor-beta differentially mediate mesenchymal stem cell differentiation, composition, and micromechanical properties of nucleus pulposus constructs

    Article • Arthritis Research & Therapy, January 2014, Springer Science + Business Media

    Brian Derby

  70. Scanning acoustic microscopy of biological cryosections: the effect of local thickness on apparent acoustic wave speed

    Article • MRS Proceedings, January 2014, Cambridge University Press

    Brian Derby

  71. Inkjet Printing Graphene-Based Transparent Conductive Films

    Article • MRS Proceedings, January 2014, Cambridge University Press

    Brian Derby

  72. Biomechanical Properties of Human Corneas Following Low- and High-Intensity Collagen Cross-Linking Determined With Scanning Acoustic Microscopy

    Article • Investigative Ophthalmology & Visual Science, August 2013, Association for Research in Vision and Ophthalmology (ARVO)

    Brian Derby

  73. Influence of Gas Phase Equilibria on the Chemical Vapor Deposition of Graphene

    Article • ACS Nano, April 2013, American Chemical Society (ACS)

    Brian Derby

  74. Scanning Acoustic Microscopy for Mapping the Microelastic Properties of Human Corneal Tissue

    Article • Current Eye Research, February 2013, Informa Healthcare

    Brian Derby

  75. Vinculin Regulates the Recruitment and Release of Core Focal Adhesion Proteins in a Force-Dependent Manner

    Article • Current Biology, February 2013, Elsevier

    Brian Derby

  76. Current concepts and advances in the application of tissue engineering in otorhinolaryngology and head and neck surgery

    Article • The Journal of Laryngology & Otology, December 2012, Cambridge University Press

    Brian Derby

  77. Printing and Prototyping of Tissues and Scaffolds

    Article • Science, November 2012, American Association for the Advancement of Science

    Brian Derby

  78. Gel-cast glass-ceramic tissue scaffolds of controlled architecture produced via stereolithography of moulds

    Article • Biofabrication, September 2012, Institute of Physics Publishing

    Brian Derby

  79. Inkjet printed carbon nanotube networks: the influence of drop spacing and drying on electrical properties

    Article • Journal of Physics D Applied Physics, July 2012, Institute of Physics Publishing

    Brian Derby

  80. Multi-layer phase analysis: quantifying the elastic properties of soft tissues and live cells with ultra-high-frequency scanning acoustic microscopy

    Article • IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, April 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Brian Derby

  81. Formation of Coffee Stains on Porous Surfaces

    Article • Langmuir, March 2012, American Chemical Society (ACS)

    Brian Derby

  82. Continuous Deposition of a Liquid Thread onto a Moving Substrate. Numerical Analysis and Comparison With Experiments

    Article • Journal of Fluids Engineering, January 2012, ASME International

    Brian Derby

  83. Inkjet printing ceramics: From drops to solid

    Article • Journal of the European Ceramic Society, November 2011, Elsevier

    Brian Derby

  84. Localised micro-mechanical stiffening in the ageing aorta

    Article • Mechanisms of Ageing and Development, October 2011, Elsevier

    Brian Derby, Professor Andrew Trafford

  85. Ink-Jet Printing of Zirconia: Coffee Staining and Line Stability

    Article • Journal of the American Ceramic Society, July 2011, Wiley

    Brian Derby

  86. Characterizing the elastic properties of tissues

    Article • Materials Today, March 2011, Elsevier

    Brian Derby

  87. Deformation mechanisms in gold nanowires and nanoporous gold

    Article • The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics, March 2011, Taylor & Francis

    Brian Derby

  88. The mechanical properties of float glass surfaces measured by nanoindentation and acoustic microscopy

    Article • Acta Materialia, February 2011, Elsevier

    Brian Derby

  89. Inkjet printing and cell seeding thermoreversible photocurable gel structures

    Article • Soft Matter, January 2011, Royal Society of Chemistry

    Brian Derby

  90. Photopolymerization of Pluronic F127 diacrylate: a colloid-templated polymerization

    Article • Soft Matter, January 2011, Royal Society of Chemistry

    Brian Derby

  91. Quantifying Micro-mechanical Properties of Soft Biological Tissues with Scanning Acoustic Microscopy

    Article • MRS Proceedings, January 2011, Cambridge University Press

    Brian Derby

  92. High-strength nanoporous silver produced by inkjet printing

    Article • Scripta Materialia, August 2010, Elsevier

    Brian Derby

  93. Inkjet Printing of Catalyst-Inks on Si Wafers and the Subsequent Synthesis of Carbon Nanotubes by Chemical Vapour Deposition

    Article • Key Engineering Materials, June 2010, Trans Tech Publications

    Brian Derby

  94. Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution

    Article • Annual Review of Materials Science, June 2010, Annual Reviews

    Brian Derby

  95. Formation and Stability of Lines Produced by Inkjet Printing

    Article • Langmuir, May 2010, American Chemical Society (ACS)

    Brian Derby

  96. Bioprinting, Inkjet Deposition

    Article • April 2010, Wiley

    Brian Derby

  97. Strain gradients and the strength of nanoporous gold

    Article • Journal of Materials Research, April 2010, Cambridge University Press

    Brian Derby

  98. Inkjet delivery of glucose oxidase

    Article • Chemical Communications, January 2010, Royal Society of Chemistry

    Brian Derby

  99. The Effect of Type 1 Diabetes on the Structure and Function of Fibrillin Microfibrils

    Article • MRS Proceedings, January 2010, Cambridge University Press

    Brian Derby

  100. Piezoelectric Inkjet Printing of Cells and Biomaterials

    Article • January 2010, Springer Science + Business Media

    Brian Derby

  101. Pyrolysis of aluminium loaded polymethylsiloxanes: the influence of Al/PMS ratio on mullite formation

    Article • Journal of Materials Science, October 2009, Springer Science + Business Media

    Brian Derby

  102. A universal scaling law for the strength of metal micropillars and nanowires

    Article • Scripta Materialia, September 2009, Elsevier

    Brian Derby

  103. Conical tungsten stamps for the replication of pore arrays in anodic aluminium oxide films

    Article • Nanotechnology, May 2009, Institute of Physics Publishing

    Brian Derby

  104. Diversity of funding sources and topics is key to survival

    Article • Nature, March 2009, Springer Science + Business Media

    Brian Derby

  105. Limits to feature size and resolution in ink jet printing

    Article • Journal of the European Ceramic Society, March 2009, Elsevier

    Brian Derby

  106. Nanoindentation of histological specimens: Mapping the elastic properties of soft tissues

    Article • Journal of Materials Research, March 2009, Cambridge University Press

    Brian Derby, Professor Andrew Trafford

  107. Novel Gelation System For Fabricating 3-D Structures via Ink Jet Printing

    Article • MRS Proceedings, January 2009, Cambridge University Press

    Brian Derby

  108. Inkjet Printing of Enzymes for Glucose Sensors

    Article • MRS Proceedings, January 2009, Springer Science + Business Media

    Brian Derby

  109. The Micromechanisms of Deformation in Nanoporous Gold

    Article • MRS Proceedings, January 2009, Springer Science + Business Media

    Brian Derby

  110. Universal Scaled Strength Behaviour for Micropillars and Nanoporous Materials

    Article • MRS Proceedings, January 2009, Springer Science + Business Media

    Brian Derby

  111. Inkjet Printing Glucose Oxidase for Biosensor Applications

    Article • ECS Transactions, October 2008, The Electrochemical Society

    Brian Derby

  112. The strength of gold nanowire forests

    Article • Scripta Materialia, July 2008, Elsevier

    Brian Derby

  113. Duplication and plagiarism increasing among students

    Article • Nature, March 2008, Springer Science + Business Media

    Brian Derby

  114. Manufacture of 3-dimensional objects by reactive inkjet printing

    Article • Soft Matter, January 2008, Royal Society of Chemistry

    Brian Derby

  115. Bioprinting: inkjet printing proteins and hybrid cell-containing materials and structures

    Article • Journal of Materials Chemistry, January 2008, Royal Society of Chemistry

    Brian Derby

  116. Nanoindentation of Histological Specimens using an Extension of the Oliver and Pharr Method

    Article • MRS Proceedings, January 2008, Cambridge University Press

    Professor Paul M Mummery, Brian Derby

  117. The Strength of Gold Nanowires and Nanoporous Gold

    Article • MRS Proceedings, January 2008, Springer Science + Business Media

    Brian Derby

  118. Mapping the Micromechanical Properties of Cryo-sectioned Aortic Tissue with Scanning Acoustic Microscopy

    Article • MRS Proceedings, January 2008, Cambridge University Press

    Brian Derby

  119. Delivery of human fibroblast cells by piezoelectric drop-on-demand inkjet printing

    Article • Biomaterials, January 2008, Elsevier

    Brian Derby

  120. Residual stress distributions around indentations and scratches in polycrystalline Al2O3 and Al2O3/SiC nanocomposites measured using fluorescence probes

    Article • Acta Materialia, January 2008, Elsevier

    Brian Derby

  121. The Growth and Mechanical Properties of Gold Nanowires

    Article • MRS Proceedings, January 2008, Springer Science + Business Media

    Brian Derby

  122. The Strength of Nanoporous Gold: Strain Gradient and Intrinsic Size Effects

    Article • January 2008, Springer Science + Business Media

    Brian Derby

  123. Correlations for single-crystal elastic constants of compound semiconductors and their representation in isomechanical groups

    Article • Physical Review B, August 2007, American Physical Society (APS)

    Brian Derby

  124. Direct ink-jet printing and low temperature conversion of conductive silver patterns

    Article • Journal of Materials Science, May 2006, Springer Science + Business Media

    Brian Derby

  125. Review: Bioprinting: A Beginning

    Article • Tissue Engineering, April 2006, Mary Ann Liebert Inc

    Brian Derby

  126. The effect of focused ion beam machining on residual stress and crack morphologies in alumina

    Article • Journal of Physics Conference Series, February 2006, Institute of Physics Publishing

    Brian Derby

  127. Mullite formation from the pyrolysis of aluminium-loaded polymethylsiloxanes: The influence of aluminium powder characteristics

    Article • Journal of the European Ceramic Society, January 2006, Elsevier

    Brian Derby

  128. Ink-Jet Printing and Sintering of PZT

    Article • Journal of the American Ceramic Society, May 2005, Wiley

    Brian Derby

  129. Intermediate Phases in Mullite Synthesis Via Aluminum- and Alumina-Filled Polymethylsiloxane

    Article • Journal of the American Ceramic Society, May 2005, Wiley

    Brian Derby

  130. Ink-jet delivery of particle suspensions by piezoelectric droplet ejectors

    Article • Journal of Applied Physics, May 2005, American Institute of Physics

    Brian Derby

  131. Viscosity and Acoustic Behavior of Ceramic Suspensions Optimized for Phase-Change Ink-Jet Printing

    Article • Journal of the American Ceramic Society, April 2005, Wiley

    Brian Derby

  132. A Low Curing Temperature Silver Ink for Use in Ink-Jet Printing and Subsequent Production of Conductive Tracks

    Article • Macromolecular Rapid Communications, February 2005, Wiley

    Brian Derby

  133. Oscillatory Incompressible Fluid Flow in a Tapered Tube With a Free Surface in an Inkjet Print Head

    Article • Journal of Fluids Engineering, January 2005, ASME International

    Brian Derby

  134. Ink-Jet Printing of Wax-Based PZT Suspensions

    Article • Key Engineering Materials, May 2004, Trans Tech Publications

    Brian Derby

  135. Thermal stress induced microcracking in alumina–20% SiCp composites

    Article • Acta Materialia, April 2004, Elsevier

    Brian Derby

  136. In SituCharacterization of Interfaces between Liquid Tin-Vanadium Alloys and Alumina by Neutron Reflection Spectroscopy

    Article • Journal of the American Ceramic Society, February 2004, Wiley

    Brian Derby

  137. Numerical and experimental comparisons of mass transport rate in a piezoelectric drop-on-demand inkjet print head

    Article • International Journal of Mechanical Sciences, February 2004, Elsevier

    Brian Derby

  138. Preparation of PZT suspensions for direct ink jet printing

    Article • Journal of the European Ceramic Society, January 2004, Elsevier

    Brian Derby

  139. Ink Jet printing of mammalian primary cells for tissue engineering applications

    Article • MRS Proceedings, January 2004, Cambridge University Press

    Brian Derby

  140. The Development and Manufacture of Aluminium Mokumé Gane (Wood-Grain Metal) Decorative Alloy

    Article • MRS Proceedings, January 2004, Cambridge University Press

    Brian Derby

  141. Modelling of R-curve behaviour in ceramic–metal laminates

    Article • Materials Science and Engineering A, January 2004, Elsevier

    Brian Derby

  142. Characterisation of Interfaces Between Liquid Tin and Alumina in the Presence of Titanium Alloy Additions

    Article • Interface Science, January 2004, Springer Science + Business Media

    Brian Derby

  143. Droplet Behaviour in Inkjet Printing

    Article • MRS Proceedings, January 2004, Springer Science + Business Media

    Brian Derby

  144. Inkjet Printing of Highly Loaded Particulate Suspensions

    Article • MRS Bulletin, November 2003, Springer Science + Business Media

    Brian Derby

  145. Oscillatory limited compressible fluid flow induced by the radial motion of a thick-walled piezoelectric tube

    Article • The Journal of the Acoustical Society of America, September 2003, Acoustical Society of America (ASA)

    Brian Derby

  146. Yttrium Silicate Powders Produced by the Sol-Gel Method, Structural and Thermal Characterization

    Article • Journal of the American Ceramic Society, September 2003, Wiley

    Brian Derby

  147. Characterisation of void and reinforcement distributions in a metal matrix composite by X-ray edge-contrast microtomography

    Article • Scripta Materialia, May 2003, Elsevier

    Brian Derby

  148. Novel collagen scaffolds with predefined internal morphology made by solid freeform fabrication

    Article • Biomaterials, April 2003, Elsevier

    Brian Derby

  149. Multilayer nitride coatings by closed field unbalanced magnetron sputter ion plating

    Article • Surface and Coatings Technology, January 2003, Elsevier

    Brian Derby

  150. Article • Journal of Materials Science Materials in Medicine, January 2002, Springer Science + Business Media

    Brian Derby

  151. Article • Journal of Materials Science, January 2002, Springer Science + Business Media

    Brian Derby

  152. Article • Journal of Materials Science, January 2002, Springer Science + Business Media

    Brian Derby

  153. Accurate determination of Young's modulus and Poisson's ratio of thin films by a combination of acoustic microscopy and nanoindentation

    Article • Thin Solid Films, November 2001, Elsevier

    Brian Derby

  154. Ink-Jet Printing of Wax-Based Alumina Suspensions

    Article • Journal of the American Ceramic Society, November 2001, Wiley

    Brian Derby

  155. Residual stress and subsurface damage in machined alumina and alumina/silicon carbide nanocomposite ceramics

    Article • Acta Materialia, February 2001, Elsevier

    Brian Derby

  156. Matrix flow and densification during the consolidation of matrix coated fibres

    Article • Acta Materialia, April 2000, Elsevier

    Brian Derby

  157. High-temperature neutron reflectometry of liquid metal-ceramic interfaces

    Article • Journal of Physics D Applied Physics, September 1999, Institute of Physics Publishing

    Brian Derby

  158. Article • Journal of Materials Science Letters, January 1999, Springer Science + Business Media

    Brian Derby

  159. Perspectives on the European Patent System

    Article • The Journal of World Intellectual Property, November 1998, Wiley

    Brian Derby

  160. High temperature neutron reflection spectroscopy of liquid metal/ceramic interfaces

    Article • Physica B Condensed Matter, June 1998, Elsevier

    Brian Derby

  161. Characterisation of liquid metal/solid ceramic interfaces by neutron reflection

    Article • Acta Materialia, April 1998, Elsevier

    Brian Derby

  162. Characterization of Alumina/Silicon Carbide Ceramic Nanocomposites

    Article • January 1998, Springer Science + Business Media

    Brian Derby

  163. Silicon carbide particle size effects in alumina-based nanocomposites

    Article • Acta Materialia, November 1996, Elsevier

    Brian Derby

  164. Wetting of titanium nitride and titanium carbide by liquid metals

    Article • Acta Materialia, January 1996, Elsevier

    Brian Derby

  165. The wetting of silicon nitride by chromium-containing alloys

    Article • Journal of Materials Science, December 1995, Springer Science + Business Media

    Brian Derby

  166. Finite-difference modelling of self-propagating high-temperature synthesis of materials

    Article • Acta Metallurgica et Materialia, October 1995, Elsevier

    Brian Derby

  167. Liquid phase bonding of siliconized silicon carbide

    Article • Journal of Materials Science, January 1995, Springer Science + Business Media

    Brian Derby

  168. Differential thermal analysis of ignition temperatures in a self-propagating high-temperature synthesis reaction

    Article • Journal of Thermal Analysis and Calorimetry, October 1994, Springer Science + Business Media

    Brian Derby

  169. Alumina/Aluminum Composites Formed by the Directed Oxidation of Aluminum Using Sodium Hydroxide as a Surface Dopant

    Article • Journal of the American Ceramic Society, July 1994, Wiley

    Brian Derby

  170. Characterization of glass-ceramic to metal bonds

    Article • Journal of Materials Science, January 1994, Springer Science + Business Media

    Brian Derby

  171. Evaluation of the efficiency of TiB2 and TiC as protective coatings for SiC monofilament in titanium-based composites

    Article • Journal of Materials Science, January 1994, Springer Science + Business Media

    Brian Derby

  172. In situ scanning electron microscope studies of fracture in particulate-reinforced metal-matrix composites

    Article • Journal of Materials Science, January 1994, Springer Science + Business Media

    Brian Derby

  173. Diffusion bonding of a nickel (chromium) alloy to zirconia: Mechanical properties and interface microstructures

    Article • Journal of Materials Science, January 1993, Springer Science + Business Media

    Brian Derby

  174. Adhesion testing of glass-ceramic thick films on metal substrates

    Article • Journal of Materials Science, January 1993, Springer Science + Business Media

    Brian Derby

  175. Creep and Thermal Cycling

    Article • January 1993, Elsevier

    Brian Derby

  176. Metal-ceramic interfaces: Sources and sinks for mass transfer

    Article • Acta Metallurgica et Materialia, January 1992, Elsevier

    Brian Derby

  177. TEM study of silicon carbide whisker microstructures

    Article • Journal of Materials Science, January 1991, Springer Science + Business Media

    Brian Derby

  178. Thermodynamic predictions for the formation of ceramic-metal composite by self-propagating high-temperature synthesis

    Article • Journal of Materials Science Letters, January 1991, Springer Science + Business Media

    Brian Derby

  179. Compressive Stresses, Buckling and Spalling of Tungsten LPD Films

    Article • MRS Proceedings, January 1990, Springer Science + Business Media

    Brian Derby

  180. Dynamic recrystallization and grain size

    Article • January 1990, Springer Science + Business Media

    Brian Derby

  181. On dynamic recrystallisation

    Article • Scripta Metallurgica, June 1987, Elsevier

    Brian Derby

  182. Diffusion bonds in copper

    Article • Journal of Materials Science, October 1984, Springer Science + Business Media

    Brian Derby

  183. Diffusion bonds in iron and a low-alloy steel

    Article • Journal of Materials Science, October 1984, Springer Science + Business Media

    Brian Derby

  184. Non-destructive testing and acoustic microscopy of diffusion bonds

    Article • Journal of Materials Science, August 1983, Springer Science + Business Media

    Brian Derby

  185. Theoretical model for diffusion bonding

    Article • Metal Science, January 1982, Maney Publishing

    Brian Derby