All Stories

  1. Insight into porous fin microchannel heat sinks with improved thermo-hydraulic performance
  2. Holistic Characterization of MgO-Al2O3, MgO-CaZrO3, and Y2O3-ZrO2 Ceramic Composites for Aerospace Propulsion Systems
  3. Numerical modeling of magnetohydrodynamic non‐Newtonian flow in a cross‐slot
  4. Plasma Actuators Based on Alumina Ceramics for Active Flow Control Applications
  5. Numerical analysis and optimization of heat transfer enhancement on a flat plate by an EHD jet
  6. On modal decomposition as surrogate for charge-conservative EHD modelling of Taylor Cone jets
  7. Plasma Actuators for Cycloidal Rotor Thrust Vectoring Enhancement in Airships
  8. Control of the flame and flow characteristics of a non-premixed bluff body burner using dielectric barrier discharge plasma actuators
  9. A parametric numerical study on the performance of polymer electrolyte membrane fuel cell with intermediate‐blocked interdigitated flow field designs
  10. Optimization of painting efficiency applying unique techniques of high-voltage conductors and nitrotherm spray: Developing deep learning models using computational fluid dynamics dataset
  11. The effect of the dielectric barrier discharge plasma actuator in the control of non-reactive flow in a non-premixed bluff body burner
  12. Dynamics of three-dimensional electrohydrodynamic instabilities on Taylor cone jets using a numerical approach
  13. Long-lasting ceramic composites for surface dielectric barrier discharge plasma actuators
  14. Catalytic wall effects for hypersonic nozzle flow in thermochemical non-equilibrium
  15. Enhancement of a cycloidal self-pitch vertical axis wind turbine performance through DBD plasma actuators at low tip speed ratio
  16. Development of a Background-Oriented Schlieren (BOS) System for Thermal Characterization of Flow Induced by Plasma Actuators
  17. Exergy, ecology and democracy - concepts of a vital society or a proposal for an exergy tax 30 years after - Part 1: Generalities
  18. Exergy, ecology and democracy - concepts of a vital society or a proposal for an exergy tax 30 years after - Part 2: Exergy and UN sustainable development goals
  19. Recent Developments on Dielectric Barrier Discharge (DBD) Plasma Actuators for Icing Mitigation
  20. Comparison of PEMFC performance with parallel serpentine and parallel serpentine-baffled flow fields under various operating and geometrical conditions; a parametric study
  21. The Role of Porous Carbon Inserts on the Performance of Polymer Electrolyte Membrane Fuel Cells: A Parametric Numerical Study
  22. Higher performance micro-channel heat sink design and analysis
  23. Review of coating and curing processes: Evaluation in automotive industry
  24. Electrostatic Painting Process: Impact of Using Connected High-Voltage Embodiments With Rotary Bell Atomizers on Droplets Transport and Deposition
  25. Numerical Simulation of Anti-Icing Effect With Dielectric Barrier Discharge Plasma Actuators on a Surface of an Airfoil
  26. Numerical Investigation of Automotive Paint Oven for Improving the Thermal Efficiency
  27. Numerical simulation of the polymer electrolyte membrane fuel cells with intermediate blocked interdigitated flow fields
  28. Numerical Investigation of Plasma Actuator Effects on Flow Control Over a Three-Dimensional Airfoil With a Sinusoidal Leading Edge
  29. Parametric optimization of surface dielectric barrier discharge actuators for ice sensing application
  30. Response to comment on: “A critical review on heat and mass transfer modelling of viral infection and virion evolution the case of SARS-COV2”
  31. Improved performance of polyimide Cirlex‐based dielectric barrier discharge plasma actuators for flow control
  32. Active control assessments towards optimizing the performance of a cycloidal rotor at hover
  33. Coupled Active Control Technique for Oscillating Blades in a Cycloidal Rotor Using CFD and ANN Analysis by Including 3D End Wall Effects
  34. Fluence As an Instrument Towards a Unified Representation of Fluiddynamic Related Phenomena
  35. Numerical Simulation of Electrified Liquid Jets Using a Geometrical VoF Method
  36. Sociotechnical design a review and future interdisciplinary perspectives involving thermodynamics in today societal contest
  37. Analysis and Implementation of Dielectric Barrier Discharge Plasma Actuators for Ground Vehicles Wake Reduction
  38. Comparative Evaluation of Dielectric Materials for Plasma Actuators Active Flow Control and Heat Transfer Applications
  39. Influence of Exposed Electrode Thickness on Plasma Actuators Performance for Coupled Deicing and Flow Control Applications
  40. Performance improvement and start-up characteristics of a cyclorotor using multiple plasma actuators
  41. Performance Optimization of Forward-Flight and Lift-Up Phases in a Cycloidal Rotor Using an Active Control Mechanism
  42. Could thermodynamics and heat and mass transfer research produce a fundamental step advance toward and significant reduction of SARS-COV-2 spread?
  43. Numerical Simulation of the Electrostatic Coating Process: the Effect of Applied Voltage, Droplet Charge and Size on the Coating Efficiency
  44. Study of the Plasma Actuator Effect on the Flow Characteristics of an Airfoil: An LES Investigation
  45. Numerical analysis of charged droplets size distribution in the electrostatic coating process: Effect of different operational conditions
  46. Cycloidal rotor coupled with DBD plasma actuators for performance improvement
  47. A critical review on heat and mass transfer modelling of viral infection and virion evolution: The case of SARS-CoV2
  48. Numerical Analysis on the Stability Conditions of an Electrohydrodynamic Jet
  49. Atomization and spray characteristics around an ERBS using various operational models and conditions: numerical investigation
  50. Comments on “New insight into the definitions of the Bejan number”
  51. Simultaneous ice detection and removal based on dielectric barrier discharge actuators
  52. An Experimental Study on Segmented-Encapsulated Electrode Dielectric-Barrier-Discharge Plasma Actuator for Mapping Ice Formation on a Surface: A Conceptual Analysis
  53. An explicit CFD model for the DBD plasma actuators using wall-jet similarity approach
  54. Implementation of Stair-Shaped Dielectric Layers in Micro- and Macroplasma Actuators for Increased Efficiency and Lifetime
  55. Thermoelectric and solar heat pump use toward self sufficient buildings: The case of a container house
  56. Numerical modeling of the distribution of virus carrying saliva droplets during sneeze and cough
  57. Dielectric Barrier Discharge Plasma Actuators for Active Flow Control, Ice Formation Detection and Ice Accumulation Prevention
  58. Novel Propulsion System for VTOL Aircraft Based on Cycloidal Rotors Coupled With Wings
  59. Accounting Thermal Exchanges in Coanda Effect
  60. The influence of convective exchanges on Coandã effect
  61. ANN assisted flow modeling and analysis for a cyclorotor in ground effect
  62. Numerical modeling of electrostatic spray painting transfer processes in rotary bell cup for automotive painting
  63. CFD Analysis of Flow Structures in a Mixing Chamber
  64. Flow Modelling of Propulsion Nozzles for Nano-Satellites
  65. Plasma Actuators Optimization Using Stair Shaped Dielectric Layers
  66. Hypersonic Flow Simulation towards Space Propulsion Geometries
  67. Numerical Analysis of a Cycloidal Rotor under Diverse Operating Conditions and Altitudes
  68. Numerical Investigation of Electrostatic Spray Painting Transfer Processes for Vehicle Coating
  69. Modeling Fluid dynamics and Aerodynamics by Second Law and Bejan Number (Part 1 - Theory)
  70. Analysis and Comparison of Different Chemistry Models for the Computation of Reacting Flows on Re-entry and Hypersonic Vehicles
  71. A new plasma actuator configuration for improved efficiency: the stair-shaped dielectric barrier discharge actuator
  72. A plasma-fluid model for EHD flow in DBD actuators and experimental validation
  73. Diffusive Bejan number and second law of thermodynamics toward a new dimensionless formulation of fluid dynamics laws
  74. A new dimensionless approach to general fluid dynamics problems that accounts both the first and the second law of thermodynamics
  75. Can constructal law and exergy analysis produce a robust design method that couples with industry 4.0 paradigms? The case of a container house
  76. A Review of Propulsion Systems for CubeSats
  77. Effects of Harmonic Vibration on Cycloidal Rotor Performance
  78. Experimental Analysis of Alternative Dielectric Materials for DBD Plasma Actuators
  79. Numerical Analysis of a Multi-Species MHD Model for Plasma Layer Control of Re-Entry Vehicles
  80. Disc Turbine for Energy Harvesting
  81. Safety Analysis of an Airship Which Loses Lifting Gas from the Hull
  82. Aeroelastic Analysis of a Cycloidal Rotor Under Various Operating Conditions
  83. Comparison of DBD plasma actuators flow control authority in different modes of actuation
  84. Development of the Concept vs Prototyping: Implementation of a real scale Water-Energy Integrated System
  85. Study of a Water-Energy Integrated System: Challenges of Prototyping
  86. Numerical Modeling of Stall and Poststall Events of a Single Pitching Blade of a Cycloidal Rotor
  87. Experimental Analysis of Dielectric Barrier Discharge Plasma Actuators Thermal Characteristics Under External Flow Influence
  88. Heat generation mechanisms of DBD plasma actuators
  89. Assessment of RANS turbulence models for numerical study of laminar-turbulent transition in convection heat transfer
  90. Experimental Thermal Characterization of DBD Plasma Actuators
  91. A New VTOL Propelled Wing for Flying Cars: Critical Bibliographic Analysis
  92. Control, Propulsion and Energy Assessment of a Spherical UAS for Low Speed Operations
  93. Low-power smart sensing in energy and water systems integration
  94. An Insight into the Coanda Flow Through Mathematical Modeling
  95. Nascent Entrepreneurs' Motivations in European Economies: A Gender Approach Using GEM Data
  96. A New Propelled Wing Aircraft Configuration
  97. Analysis of Innovative Plasma Actuator Geometries for Boundary Layer Control
  98. Optimized Modular Design for Energy Efficiency: The Case of an Innovative Electric Hybrid Vehicle Design
  99. Design of an Innovative Off Road Hybrid Vehicle by Energy Efficiency Criteria
  100. Thermodynamic Analysis and Preliminary Design of the Cooling System of a Pulsejet for Aeronautic Propulsion
  101. Temperature Oscillations in the Wall of a Cooled Multi Pulsejet Propeller for Aeronautic Propulsion
  102. Parametric Analysis of a Large-Scale Cycloidal Rotor in Hovering Conditions
  103. A comparison of post-stall models extended for propeller performance prediction
  104. XFOIL vs CFD performance predictions for high lift low Reynolds number airfoils
  105. Constructal Design of an Entropic Wall With Circulating Water Inside
  106. Implementation of the classical plasma–fluid model for simulation of dielectric barrier discharge (DBD) actuators in OpenFOAM
  107. A new aircraft architecture based on the ACHEON Coanda effect nozzle: flight model and energy evaluation
  108. Geometrical Parameters Influencing the Aerodynamic Efficiency of a Small-Scale Self-Pitch High-Solidity VAWT
  109. Aerodynamic optimization of cyclorotors
  110. Computational Fluid Dynamic Study on a Novel Propulsive System: ACHEON and Its Integration with an Unmanned Aerial Vehicle (UAV)
  111. 3D Effects in Cyclorotor Propulsion Systems
  112. MAAT Cruiser/Feeder Airship Design: Intrinsic Stability and Energetic Flight Model
  113. Numerical Analysis of Design Parameters With Strong Influence on the Aerodynamic Efficiency of a Small-Scale Self-Pitch VAWT
  114. Plasma Actuators for Boundary Layer Control of Next Generation Nozzles
  115. Turbulent transition modeling through mechanical considerations
  116. Energy Self Sufficient Aircrafts Can Become Reality through New Propulsion Design Approaches
  117. Multifunctional Unmanned Reconnaissance Aircraft for Low-Speed and STOL Operations
  118. Preliminary Implementation Study of ACHEON Thrust and Vector Electrical Propulsion on a STOL Light Utility Aircraft
  119. High altitude propeller design and analysis
  120. Analysis of transitional flow in 3D geometries using a novel phenomenological model
  121. Numerical analysis of real gas MHD flow on two-dimensional self-field MPD thrusters
  122. Analytical modeling of a cyclorotor in hovering state
  123. Numerical design and analysis of a multi-DBD actuator configuration for the experimental testing of ACHEON nozzle model
  124. Validation of New Formulations for Propeller Analysis
  125. Prevention and Risk Management in RTD European Projects Developed by University-Company's Consortiums
  126. Unsteady Interaction Effects Between an Airship and Its Air-Jet Propulsion System
  127. Cycloidal Rotor Propulsion System With Plasma Enhanced Aerodynamics
  128. Exist Flow Vector Control on a Coanda Nozzle Using Dielectric Barrier Discharge Actuator
  129. Wind Energy Production Using an Optimized Variable Pitch Vertical Axis Rotor
  130. Two-dimensional numerical modeling of interaction of micro-shock wave generated by nanosecond plasma actuators and transonic flow
  131. A pressure-based high resolution numerical method for resistive MHD
  132. Roto-Cycloid Propelled Airship Dimensioning and Energetic Equilibrium
  133. Modified split-potential model for modeling the effect of DBD plasma actuators in high altitude flow control
  134. PECyT - Plasma Enhanced Cycloidal Thruster
  135. Aerodynamic and Aeroelastic Analysis of a Cycloidal Rotor
  136. Numerical modeling of coanda effect in a novel propulsive system
  137. MAAT – Promising innovative design and green propulsive concept for future airship's transport
  138. Analysis of PEM (Polymer Electrolyte Membrane) fuel cell cathode two-dimensional modeling
  139. The Influence of Surface Temperature on Coanda Effect
  140. Analytic Model Able to Assist in Parametric Design of Cycloidal Rotor Thrusters
  141. Numerical Modelling of Electrode Geometry Effects on a 2D Self-Field MPD Thruster
  142. Thermojet: An Old Idea Can Define a Novel Family of Jets
  143. Analytical Modeling of a Cyclorotor in Forward Flight
  144. High Altitude Transitional Flow Computation for a Propulsion System Nacelle of MAAT Airship
  145. Numerical Modeling of Turbulent Transitional MHD Flow for Boundary Layer Control
  146. Full Range Airfoil Polars for Propeller Blade Element Momentum Analysis
  147. JBLADE: a Propeller Design and Analysis Code
  148. Modeling of hypersonic flow on a MPD thruster geometry using a PISO based method
  149. A pressure-based method with AUSM-type fluxes for MHD flows at arbitrary Mach numbers
  150. A review of thrust-vectoring in support of a V/STOL non-moving mechanical propulsion system
  151. A Novel Look at the Performance of the Cyclorotor Propulsion System for Air Vehicles
  152. Acheon Project: A Novel Vectoring Jet Concept
  153. CFD Analysis and Optimization of a Variable Shape Airship
  154. Numerical Research on Efficiency Performance of the Propulsion System for an Innovative Airship
  155. Overcoming Stopovers in Cycloidal Rotor Propulsion Integration on Air Vehicles
  156. An innovative experimental on-road testing method and its demonstration on a prototype vehicle
  157. Fire-safe Airship System Design
  158. A critical review of propulsion concepts for modern airships
  159. A hybrid pressure-density-based algorithm for the Euler equations at all Mach number regimes
  160. Three-dimensional effects of curved plasma actuators in quiescent air
  161. Benchmark test cases for CFD in mechanical engineering
  162. Accuracy details in realistic CFD modeling of an industrial centrifugal pump in direct and reverse modes
  163. Performance assessment limits in transonic 3D turbine stage blade rows using a mixing-plane approach
  164. A fast iterative inverse method for turbomachinery blade design
  165. Simulation of the aerodynamic behaviour of a micro wind turbine
  166. Redesigning Annular Turbine Blade Rows Using a Viscous-Inviscid Inverse Design Method
  167. Turbine Blade Duty Re-Design by Controlling Lean and Sweep Using an Innovative Iterative Inverse Design Method