All Stories

  1. Nanofiber Interlayers of polystyrene-based copolymers containing melting and cross-linking phases

    Article • January 2019, American Institute of Aeronautics and Astronautics (AIAA)

    melih papila, Farzin Asghari Arpatappeh, Berk Emre Aydemir

  2. Design of and with thin-ply non-crimp fabric as building blocks for composites

    Article • Science and Engineering of Composite Materials, April 2018, De Gruyter

    melih papila

  3. High strain rate response of nanofiber interlayered structural composites

    Article • Composite Structures, May 2017, Elsevier

    melih papila, Dr Kaan Bilge

  4. Conjugated dual-phase transitions in crystalline/crystalline blend of poly(vinylidene fluoride)/poly(ethylene oxide)

    Article • Polymer Bulletin, October 2016, Springer Science + Business Media

    melih papila

  5. Sound-tracking of failure events in cross-ply composite laminates under tension

    Article • Composite Structures, October 2016, Elsevier

    Dr Kaan Bilge, melih papila

  6. Effect of miscibility state on crystallization behavior and polymorphism in crystalline/crystalline blends of poly(vinylidene fluoride)/poly(ethylene oxide)

    Article • Macromolecular Research, August 2016, Springer Science + Business Media

    melih papila

  7. Stabilized electrospinning of heat stimuli/in situ crosslinkable nanofibers and their self-same nanocomposites

    Article • Journal of Applied Polymer Science, July 2016, Wiley

    melih papila, Dr Kaan Bilge

  8. PVA/PANI/rGO ternary electrospun mats as metal-free anti-bacterial substrates

    Article • RSC Advances, January 2016, Royal Society of Chemistry

    melih papila

  9. Graphene-reinforced poly(vinyl alcohol) electrospun fibers as building blocks for high performance nanocomposites

    Article • RSC Advances, January 2015, Royal Society of Chemistry

    melih papila

  10. Interlayer toughening mechanisms of composite materials

    Article • January 2015, Elsevier

    melih papila, Dr Kaan Bilge

  11. Global and local nanofibrous interlayer toughened composites for higher in-plane strength

    Article • Composites Part A Applied Science and Manufacturing, March 2014, Elsevier

    Dr Kaan Bilge, melih papila

  12. MWCNTs/P(St-co-GMA) Composite Nanofibers of Engineered Interface Chemistry for Epoxy Matrix Nanocomposites

    Article • ACS Applied Materials & Interfaces, February 2012, American Chemical Society (ACS)

    melih papila

  13. Designed-in Molecular Interactions Lead to Superior Thermo-mechanical Properties in Nanocomposites

    Article • MRS Proceedings, January 2011, Cambridge University Press

    melih papila

  14. Microstructural features and electrical properties of copper oxide added potassium sodium niobate ceramics

    Article • Ceramics International, August 2010, Elsevier

    melih papila

  15. Engineering Chemistry of Electrospun Nanofibers and Interfaces in Nanocomposites for Superior Mechanical Properties

    Article • ACS Applied Materials & Interfaces, July 2010, American Chemical Society (ACS)

    melih papila

  16. “Equivalent” Electromechanical Coefficient for IPMC Actuator Design Based on Equivalent Bimorph Beam Theory

    Article • Experimental Mechanics, January 2010, Springer Science + Business Media

    melih papila

  17. Processing Conditions and Aging Effect on the Morphology of PZT Electrospun Nanofibers, and Dielectric Properties of the Resulting 3-3 PZT/Polymer Composite

    Article • Journal of the American Ceramic Society, November 2009, Wiley

    melih papila

  18. Electrical properties of CuO added-KNN ceramics and 1–3 Piezocomposites

    Article • September 2009, Institute of Electrical & Electronics Engineers (IEEE)

    melih papila

  19. Dielectric behavior characterization of a fibrous-ZnO/PVDF nanocomposite

    Article • Polymer Composites, May 2009, Wiley

    melih papila

  20. Electrospun Polymer/MWCNTs Nanofiber Reinforced Composites “Improvement of Interfacial Bonding by Surface Modified Nanofibers”

    Article • MRS Proceedings, January 2009, Cambridge University Press

    melih papila

  21. Optimization of clamped circular piezoelectric composite actuators

    Article • Sensors and Actuators A Physical, September 2008, Elsevier

    melih papila

  22. The effect of IPMC parameters in electromechanical coefficient based on equivalent beam theory

    Article • March 2008, SPIE

    melih papila

  23. Pb(Zr,Ti)O3 Nanofibers Produced by Electrospinning Process

    Article • MRS Proceedings, January 2008, Cambridge University Press

    melih papila

  24. Effects of electrospinning parameters on polyacrylonitrile nanofiber diameter: An investigation by response surface methodology

    Article • Materials & Design (1980-2015), January 2008, Elsevier

    melih papila

  25. Poly(vinylidene fluoride)/zinc oxide smart composite material

    Article • April 2007, SPIE

    melih papila

  26. Piezoresistive Microphone Design Pareto Optimization: Tradeoff Between Sensitivity and Noise Floor

    Article • Journal of Microelectromechanical Systems, December 2006, Institute of Electrical & Electronics Engineers (IEEE)

    melih papila

  27. Modeling and optimization of a side-implanted piezoresistive shear stress sensor

    Article • March 2006, SPIE

    melih papila

  28. Generalized pointwise bias error bounds for response surface approximations

    Article • International Journal for Numerical Methods in Engineering, January 2006, Wiley

    melih papila

  29. Pointwise Bias Error Bounds and Min-Max Design for Response Surface Approximations

    Article • AIAA Journal, August 2005, American Institute of Aeronautics and Astronautics (AIAA)

    melih papila

  30. Tailoring Wing Structures for Reduced Drag Penalty in Off-Design Flight Conditions

    Article • August 2004, American Institute of Aeronautics and Astronautics (AIAA)

    melih papila

  31. Out-Of-Plane Deformation, Flatness And Shape Measurement

    Article • December 2003, Taylor & Francis

    melih papila

  32. Implementation of a crack propagation constraint within a structural optimization software

    Article • Structural and Multidisciplinary Optimization, December 2003, Springer Science + Business Media

    melih papila

  33. Piezoresistive Microphone Design Pareto Optimization: Tradeoff Between Sensitivity and Noise Floor

    Article • April 2003, American Institute of Aeronautics and Astronautics (AIAA)

    melih papila

  34. Tradeoffs of Weight and Inspection Cost in Fail-safe Design

    Article • April 2003, American Institute of Aeronautics and Astronautics (AIAA)

    melih papila

  35. Optimization of Synthetic Jet Actuators

    Article • January 2003, American Institute of Aeronautics and Astronautics (AIAA)

    melih papila

  36. Estimating Optimization Error Statistics via Optimization Runs from Multiple Starting Points

    Article • September 2002, American Institute of Aeronautics and Astronautics (AIAA)

    melih papila

  37. Simultaneous Design Optimization of Aircraft Structures and Inspection Periods

    Article • April 2002, American Institute of Aeronautics and Astronautics (AIAA)

    melih papila

  38. Error-based design space windowing

    Article • January 2002, American Institute of Aeronautics and Astronautics (AIAA)

    melih papila

  39. Detection and Repair of Poorly Converged Optimization Runs

    Article • AIAA Journal, December 2001, American Institute of Aeronautics and Astronautics (AIAA)

    melih papila

  40. Uncertainty and response surface approximations

    Article • June 2001, American Institute of Aeronautics and Astronautics (AIAA)

    melih papila

  41. Optimal weight of cracked composite panels by an equivalent strain constraint

    Article • June 2001, American Institute of Aeronautics and Astronautics (AIAA)

    melih papila

  42. Post-Buckling of Composite I-Sections. Part 1: Theory

    Article • Journal of Composite Materials, May 2001, SAGE Publications

    melih papila

  43. Post-Buckling of Composite I-Sections. Part 2: Experimental Validation

    Article • Journal of Composite Materials, May 2001, SAGE Publications

    melih papila

  44. Post-Buckling of Composite I-Sections. Part 1: Theory

    Article • Journal of Composite Materials, January 2001, SAGE Publications

    melih papila

  45. Post-Buckling of Composite I-Sections. Part 2: Experimental Validation

    Article • Journal of Composite Materials, January 2001, SAGE Publications

    melih papila

  46. Detection and repair of poorly converged optimization runs

    Article • AIAA Journal, January 2001, American Institute of Aeronautics and Astronautics (AIAA)

    melih papila

  47. Response Surface Approximations: Noise, Error Repair, and Modeling Errors

    Article • AIAA Journal, December 2000, American Institute of Aeronautics and Astronautics (AIAA)

    melih papila

  48. Response surfaces for optimal weight of cracked composite panels - Noise and accuracy

    Article • September 2000, American Institute of Aeronautics and Astronautics (AIAA)

    melih papila

  49. Detection and correction of poorly converged optimizations by Iteratively Reweighted Least Squares

    Article • April 2000, American Institute of Aeronautics and Astronautics (AIAA)

    melih papila

  50. Response approximations - Noise, error repair, modeling errors

    Article • AIAA Journal, January 2000, American Institute of Aeronautics and Astronautics (AIAA)

    melih papila

  51. Uncertainty and wing structural weight approximations

    Article • April 1999, American Institute of Aeronautics and Astronautics (AIAA)

    melih papila

  52. Out-of-plane deformation, flatness and shape measurement

    Article • Taylor & Francis

    melih papila