All Stories

  1. A comparative fractographic analysis for the effect of polymeric nanofiber reinforcements on the tensile behavior of multi‐layered epoxy nanocomposites

    Article • Polymer Engineering & Science, March 2025, Wiley

    Dr Kaan Bilge

  2. Grid-by-Grid Fractographic Analysis of Additively Manufactured UV-Cured Resins for Pre-programmable Failure

    Article • Journal of Failure Analysis and Prevention, November 2024, Springer Science + Business Media

    Dr Kaan Bilge

  3. A sustainable hybrid strengthening/stiffening approach for injection molded polypropylene matrix thermoplastic composites

    Article • Polymer Engineering & Science, September 2024, Wiley

    Dr Kaan Bilge

  4. One-step preparation of silver nanoparticle containing polymer nanocomposites via stereolithography technique

    Article • Journal of Innovative Engineering and Natural Science, February 2024, Journal of Innovative Engineering and Natural Science

    Dr Kaan Bilge

  5. Morphological adaptation of expanded vermiculite in polylactic acid and polypropylene matrices for superior thermoplastic composites

    Article • Polymer Composites, January 2024, Wiley

    Dr Kaan Bilge

  6. Hybrid green composites of PLA incorporated with upcycled waste cellulose and vermiculite

    Article • European Polymer Journal, January 2024, Elsevier

    Dr Kaan Bilge

  7. Stiffness of <i>In-Situ</i> Formed Interleaving Polymeric Nanofiber-Epoxy Nanocomposites

    Article • Open Journal of Composite Materials, January 2024, Scientific Research Publishing, Inc,

    Dr Kaan Bilge

  8. Fractographic Investigation of Cryogenic Temperature Mode-II Delamination Behavior of Filament Wound CFRP Laminates with Varied Resin Systems

    Article • Journal of Composites Science, October 2023, MDPI AG

    Dr Kaan Bilge

  9. Cover Image, Volume 139, Issue 48

    Article • Journal of Applied Polymer Science, November 2022, Wiley

    Dr Kaan Bilge

  10. Morphology evolution of self‐same nanocomposites hybridized with jumbo‐sized particles

    Article • Journal of Applied Polymer Science, September 2022, Wiley

    Dr Kaan Bilge, Farzin Asghari Arpatappeh

  11. Synergistic Effect of Nano-additives and Tackifier Resins on Hybrid Rocket Fuel Performance

    Article • August 2020, American Institute of Aeronautics and Astronautics (AIAA)

    Dr Kaan Bilge, Ugur Kokal

  12. Blends of highly branched and linear poly(arylene ether sulfone)s: Multiscale effect of the degree of branching on the morphology and mechanical properties

    Article • Polymer, February 2020, Elsevier

    Dr Kaan Bilge

  13. Selection Criteria for Tackifier Addition to Paraffin Wax based Hybrid Rocket Fuels

    Article • August 2019, American Institute of Aeronautics and Astronautics (AIAA)

    Dr Kaan Bilge

  14. Challenges in Micro-CT Characterization of Composites

    Article • July 2019, Springer Science + Business Media

    Dr Kaan Bilge

  15. Nanofiber Interlayers of polystyrene-based copolymers containing melting and cross-linking phases

    Article • January 2019, American Institute of Aeronautics and Astronautics (AIAA)

    melih papila, Farzin Asghari Arpatappeh, Berk Emre Aydemir, Dr Kaan Bilge

  16. High surface area activated carbon from waste-biomass of sunflower piths

    Article • Journal of Environmental Chemical Engineering, April 2018, Elsevier

    Dr Kaan Bilge

  17. Catalytic Synthesis of Boron Nitride Nanotubes at Low Temperatures

    Article • Nanoscale, January 2018, Royal Society of Chemistry

    Dr Kaan Bilge

  18. Low Density Polypropylene/Waste Cellulose Fiber Composites by High-Shear Thermo-Kinetic Mixer

    Article • International Polymer Processing, November 2017, De Gruyter

    Dr Kaan Bilge

  19. Recycling of EPDM

    Article • Journal of Elastomers & Plastics, November 2017, SAGE Publications

    Dr Kaan Bilge

  20. Method to adapt highly amorphous nanofibers with low temperature limits to composite structures

    Article • Composites Science and Technology, October 2017, Elsevier

    Dr Kaan Bilge

  21. High-Performance Green Composites of Poly(lactic acid) and Waste Cellulose Fibers Prepared by High-Shear Thermokinetic Mixing

    Article • Industrial & Engineering Chemistry Research, July 2017, American Chemical Society (ACS)

    Dr Kaan Bilge

  22. High strain rate response of nanofiber interlayered structural composites

    Article • Composite Structures, May 2017, Elsevier

    melih papila, Dr Kaan Bilge

  23. Sound-tracking of failure events in cross-ply composite laminates under tension

    Article • Composite Structures, October 2016, Elsevier

    Dr Kaan Bilge, melih papila

  24. Stabilized electrospinning of heat stimuli/in situ crosslinkable nanofibers and their self-same nanocomposites

    Article • Journal of Applied Polymer Science, July 2016, Wiley

    melih papila, Dr Kaan Bilge

  25. Interlayer toughening mechanisms of composite materials

    Article • January 2015, Elsevier

    melih papila, Dr Kaan Bilge

  26. Global and local nanofibrous interlayer toughened composites for higher in-plane strength

    Article • Composites Part A Applied Science and Manufacturing, March 2014, Elsevier

    Dr Kaan Bilge, melih papila

  27. Structural composites hybridized with epoxy compatible polymer/MWCNT nanofibrous interlayers

    Article • Composites Science and Technology, September 2012, Elsevier

    Dr Kaan Bilge

  28. Designed-in Molecular Interactions Lead to Superior Thermo-mechanical Properties in Nanocomposites

    Article • MRS Proceedings, January 2011, Cambridge University Press

    melih papila, Dr Kaan Bilge