All Stories

  1. Three-Dimensional-Printed Models: A Novel Approach to Ultrasound Education of the Placental Cord Insertion Site
  2. Innovative Hands-On Approach for Magnetic Resonance Imaging Education of an Undergraduate Medical Radiation Science Course in Australia: A Feasibility Study
  3. Three-Dimensional-Printed Gastrointestinal Tract Models for Surgical Planning and Medical Education: A Systematic Review
  4. Investigation of the Clinical Value of Three-Dimensional-Printed Personalised Vascular Models for the Education and Training of Clinicians When Performing Interventional Endovascular Procedures
  5. Image Findings from Dual-phase Computed Tomography Pulmonary Angiography for Diagnosing Tuberculosis-associated Fibrosing Mediastinitis
  6. A Rare Case of an Intracardial Ectopic Thyroid in the Right Ventricle
  7. Development of a 3D-Printed Chest Phantom with Simulation of Lung Nodules for Studying Ultra-Low-Dose Computed Tomography Protocols
  8. Perspectives of medical imaging professionals about the impact of AI on Swiss radiographers
  9. Comparison of augmented reality with other teaching methods in learning anatomy: A systematic review
  10. Investigation of the Clinical Value of Four Visualization Modalities for Congenital Heart Disease
  11. CT Imaging Findings of Pulmonary Artery Stenosis: A Pictorial Review
  12. Improving radiology information systems for inclusivity of transgender and gender‐diverse patients: what are the problems and what are the solutions? A systematic review
  13. Using design thinking to create and implement a 3D digital library of anatomical specimens
  14. Advances and Applications of Three-Dimensional-Printed Patient-Specific Chest Phantoms in Radiology: A Systematic Review
  15. Epidemiological Relationship of Photoplethysmography Signal Derived from Arterial Stiffness and Blood Pressure to Coronary Artery Disease: A Systematic Review
  16. Cardiovascular computed tomography in cardiovascular disease: An overview of its applications from diagnosis to prediction
  17. Cardiovascular Computed Tomography in the Diagnosis of Cardiovascular Disease: Beyond Lumen Assessment
  18. Artificial Intelligence-Assisted Detection of Osteoporotic Vertebral Fractures on Lateral Chest Radiographs in Post-Menopausal Women
  19. Computed Tomography Imaging Features of Pulmonary Sequestration
  20. Three-Dimensional Printed Liver Models for Surgical Planning and Intraoperative Guidance of Liver Cancer Resection: A Systematic Review
  21. Comparison of Performance of Micro-Computed Tomography (Micro-CT) and Synchrotron Radiation CT in Assessing Coronary Stenosis Caused by Calcified Plaques in Coronary Artery Phantoms
  22. Three-Dimensional Bioprinting in Cardiovascular Disease: Current Status and Future Directions
  23. A workflow for the creation of photorealistic 3D cadaveric models using photogrammetry
  24. A Novel CT Perfusion-Based Fractional Flow Reserve Algorithm for Detecting Coronary Artery Disease
  25. Patient-Specific 3D-Printed Low-Cost Models in Medical Education and Clinical Practice
  26. Patient-Specific 3D-Printed Models in Pediatric Congenital Heart Disease
  27. Machine Learning Based on Computed Tomography Pulmonary Angiography in Evaluating Pulmonary Artery Pressure in Patients with Pulmonary Hypertension
  28. Investigation of the Relationship between Right Coronary Artery–Aorta Angle and Coronary Artery Disease and Associated Risk Factors
  29. Prognostic Significance of Cardiac Magnetic Resonance in Left Atrial and Biventricular Strain Analysis during the Follow-Up of Suspected Myocarditis
  30. Prognostic Value of Cardiac Magnetic Resonance in Assessing Right Ventricular Strain in Cardiovascular Disease: A Systematic Review and Meta-Analysis
  31. Clinical Applications of Mixed Reality and 3D Printing in Congenital Heart Disease
  32. Enhanced Visualisation of Normal Anatomy with Potential Use of Augmented Reality Superimposed on Three-Dimensional Printed Models
  33. 3D Printed Models in Cardiovascular Disease: An Exciting Future to Deliver Personalized Medicine
  34. Evaluation of the Relationship between Left Coronary Artery Bifurcation Angle and Coronary Artery Disease: A Systematic Review
  35. Finetuned Super-Resolution Generative Adversarial Network (Artificial Intelligence) Model for Calcium Deblooming in Coronary Computed Tomography Angiography
  36. The Application of Eye-Tracking Technology in the Assessment of Radiology Practices: A Systematic Review
  37. The Dynamic Characteristics of Myocardial Contractility and Extracellular Volume in Type 2 Diabetes Mellitus Mice Investigated by 7.0T Cardiac Magnetic Resonance
  38. Assessment of Optimization of Computed Tomography Angiography Protocols for Follow-Up Type B Aortic Dissection Patients by Using a 3D-Printed Model
  39. The impact of COVID‐19 on Western Australian medical imaging clinical practice and workplace
  40. Artificial Intelligence (Enhanced Super-Resolution Generative Adversarial Network) for Calcium Deblooming in Coronary Computed Tomography Angiography: A Feasibility Study
  41. Cortical and medullary oxygenation evaluation of kidneys with renal artery stenosis by BOLD-MRI
  42. Added Value of Computed Tomography Virtual Intravascular Endoscopy in the Evaluation of Coronary Arteries with Stents or Plaques
  43. OUP accepted manuscript
  44. CT Findings of Pulmonary Metastases from Primary Cardiac Angiosarcoma
  45. 3D-Printed Dynamic Heart Models Allow Accurate Prediction of Cardiac Complications by Simulating Hemodynamics
  46. 3D-Printed Coronary Plaques to Simulate High Calcification in the Coronary Arteries for Investigation of Blooming Artifacts
  47. Investigation of Three-dimensional Printing Materials for Printing Aorta Model Replicating Type B Aortic Dissection
  48. 3D Printing in Medical Applications
  49. Optimization of Computed Tomography Angiography Protocols for Follow-Up Type B Aortic Dissection Patients by Using 3D Printed Model
  50. Clinical Value of Virtual Reality versus 3D Printing in Congenital Heart Disease
  51. Hemodynamic Comparison of Stent-Grafts for the Treatment of Aortoiliac Occlusive Disease
  52. Optimal image Segmentation Protocol for 3D Printing of Aortic Dissection Through Open-Source Software
  53. Quantitative Assessment of 3D Printed Model Accuracy in Delineating Congenital Heart Disease
  54. Digital Variance Angiography: A Promising Alternative Technology to Traditional Angiography for Improvement of Image Quality with Reduction of Radiation and Contrast Medium Doses
  55. Rates and Patterns of First-Time Admissions for Acute Coronary Syndromes across Western Australia Using Linked Administrative Health Data 2007–2015
  56. Clinical Applications of Patient-Specific 3D Printed Models in Cardiovascular Disease: Current Status and Future Directions
  57. X-ray operators' self-perceived competence, barriers and facilitators in general radiography practice in Western Australia
  58. Use of Three-dimensional Printing in the Development of Optimal Cardiac CT Scanning Protocols
  59. Quantitative Measurement of Breast Density Using Personalized 3D-Printed Breast Model for Magnetic Resonance Imaging
  60. Clinical and Imaging Features of Primary Cardiac Angiosarcoma
  61. 3D Printed Coronary Models Offer Potential Value in Visualising Coronary Anatomy and Coronary Stents for Investigation of Coronary CT Protocols
  62. Clinical characteristics and chest CT imaging features of critically ill COVID-19 patients
  63. Diagnostic Value of Chest CT in Coronavirus Disease 2019 (COVID-19)
  64. A systematic review of chest imaging findings in COVID-19
  65. A novel roller pump for physiological flow
  66. Effective dose and image optimisation of lateral lumbar spine radiography: a phantom study
  67. Quantitative Assessment of Extracellular Volume in Doxorubicin-Induced Liver Injury in Beagle Models by Equilibrium Computed Tomography
  68. Cardiac magnetic resonance imaging of primary cardiac tumors
  69. Diagnostic performance of a fast non-invasive fractional flow reserve derived from coronary CT angiography: an initial validation study
  70. Femoral Neck Angle Impacts Hip Disorder and Surgical Intervention
  71. Dimensional Accuracy and Clinical Value of 3D Printed Models in Congenital Heart Disease: A Systematic Review and Meta-Analysis
  72. 3D printed coronary models offer new opportunities for developing optimal coronary CT angiography protocols in imaging coronary stents
  73. Personalized 3D printed coronary models in coronary stenting
  74. Relationship between intracranial pressure and phase-contrast cine MRI-derived measures of cerebrospinal fluid parameters in communicating hydrocephalus
  75. A Systematic Review of the Clinical Value and Applications of Three-Dimensional Printing in Renal Surgery
  76. A Systematic Review of Double Low-dose CT Pulmonary Angiography in Pulmonary Embolism
  77. Double low-dose computed tomography pulmonary angiography in the diagnosis of pulmonary embolism
  78. Quantitative Measurements of Breast Density Using Magnetic Resonance Imaging: A Systematic Review and Meta-Analysis
  79. Personalized Three-Dimensional Printed Models in Congenital Heart Disease
  80. Quantification of doxorubicin-induced interstitial myocardial fibrosis in a beagle model using equilibrium contrast-enhanced computed tomography: A comparative study with cardiac magnetic resonance T1-mapping
  81. Personalized administration of contrast medium with high delivery rate in low tube voltage coronary computed tomography angiography
  82. Reliability Indicators for 2‐Dimensional Shear Wave Elastography
  83. Circulating Tumour Cells (CTC), Head and Neck Cancer and Radiotherapy; Future Perspectives
  84. Second-generation motion correction algorithm improves diagnostic accuracy of single-beat coronary CT angiography in patients with increased heart rate
  85. Investigating accuracy of 3D printed liver models with computed tomography
  86. Optimization of computed tomography pulmonary angiography protocols using 3D printed model with simulation of pulmonary embolism
  87. Patient-specific 3D printed model of biliary ducts with congenital cyst
  88. Patient-specific 3D printed pulmonary artery model with simulation of peripheral pulmonary embolism for developing optimal computed tomography pulmonary angiography protocols
  89. Quantitative and qualitative comparison of low- and high-cost 3D-printed heart models
  90. Synchrotron radiation computed tomography assessment of calcified plaques and coronary stenosis with different slice thicknesses and beam energies on 3D printed coronary models
  91. 3D printing in medicine: current applications and future directions
  92. Extracellular volume quantitation using dual-energy CT in patients with heart failure: Comparison with 3T cardiac MR
  93. Shear Wave Elastography on the Uterine Cervix: Technical Development for the Transvaginal Approach
  94. Education and training as a strategy to improve justification of medical imaging referrals in emergency departments
  95. Synchrotron radiation computed tomography versus conventional computed tomography for assessment of four types of stent grafts used for endovascular treatment of thoracic and abdominal aortic aneurysms
  96. Quantitative Study of Abdominal Blood Flow Patterns in Patients with Aortic Dissection by 4-Dimensional Flow MRI
  97. Blooming Artifact Reduction in Coronary Artery Calcification by A New De-blooming Algorithm: Initial Study
  98. A Systematic Review of Three-Dimensional Printing in Liver Disease
  99. A systematic review of clinical value of three-dimensional printing in renal disease
  100. Low tube voltage prospectively ECG-triggered coronary CT angiography: a systematic review of image quality and radiation dose
  101. Clinical value of patient-specific three-dimensional printing of congenital heart disease: Quantitative and qualitative assessments
  102. Flow pattern analysis in type B aortic dissection patients after stent‐grafting repair: Comparison between complete and incomplete false lumen thrombosis
  103. A Preliminary Study of Computed Tomography Coronary Angiography Within a Single Cardiac Cycle in Patients With Atrial Fibrillation Using 256-Row Detector Computed Tomography
  104. Three-dimensional printing in congenital heart disease: A systematic review
  105. CT coronary angiography findings in non-atherosclerotic coronary artery diseases
  106. MR imaging features of benign retroperitoneal paragangliomas and schwannomas
  107. Impact of SSF on Diagnostic Performance of Coronary Computed Tomography Angiography Within 1 Heart Beat in Patients With High Heart Rate Using a 256-Row Detector Computed Tomography
  108. Measurement of coronary bifurcation angle with coronary CT angiography: A phantom study
  109. Patient-specific three-dimensional printing for pre-surgical planning in hepatocellular carcinoma treatment
  110. Ultra-high b-value diffusion-weighted imaging features of the prostatic leiomyoma-case report
  111. An investigation of correlation between left coronary bifurcation angle and hemodynamic changes in coronary stenosis by coronary computed tomography angiography-derived computational fluid dynamics
  112. Dual energy CT angiography in peripheral arterial stents: optimal scanning protocols with regard to image quality and radiation dose
  113. Use of Synchrotron Radiation to Accurately Assess Cross-Sectional Area Reduction of the Aortic Branch Ostia Caused by Suprarenal Stent Wires
  114. Patient-Specific 3D Printed Models of Aortic Aneurysm and Aortic Dissection
  115. Diagnostic performance of 256-row detector coronary CT angiography in patients with high heart rates within a single cardiac cycle: a preliminary study
  116. Synchrotron Radiation Imaging of Aortic Stent Grafting: An In Vitro Phantom Study
  117. MR imaging features of benign retroperitoneal extra-adrenal paragangliomas
  118. Potential screening tool for aortoiliac stent graft patients
  119. CT Virtual Intravascular Endoscopy in the Visualization of Coronary Plaques: A Pictorial Essay
  120. Quantitative analysis of late gadolinium enhancement in hypertrophic cardiomyopathy: comparison of diagnostic performance in myocardial fibrosis between gadobutrol and gadopentetate dimeglumine
  121. Clinical evaluation of new automatic coronary-specific best cardiac phase selection algorithm for single-beat coronary CT angiography
  122. 320-row CT renal perfusion imaging in patients with aortic dissection: A preliminary study
  123. Modelling of aortic aneurysm and aortic dissection through 3D printing
  124. Dual Energy Computed Tomography Angiography in the Peripheral Arterial Imaging: A Systematic Review of Image Quality, Radiation Dose and Diagnostic Value
  125. Automatic Location of Blood Vessel Bifurcations in Digital Eye Fundus Images
  126. A systematic review of 3-D printing in cardiovascular and cerebrovascular diseases
  127. Late Gadolinium Enhancement Amount As an Independent Risk Factor for the Incidence of Adverse Cardiovascular Events in Patients with Stage C or D Heart Failure
  128. Recent Update on Radiation Dose Assessment for the State-of-the-Art Coronary Computed Tomography Angiography Protocols
  129. A systematic review of computational fluid dynamics in type B aortic dissection
  130. Coronary computed tomography angiography investigation of the association between left main coronary artery bifurcation angle and risk factors of coronary artery disease
  131. Dermatofibrosarcoma protuberans—a rare neoplasm
  132. Diagnostic Value of Transthoracic Echocardiography in Patients With Anomalous Origin of the Left Coronary Artery From the Pulmonary Artery
  133. Prediction of thrombus formation using vortical structures presentation in Stanford type B aortic dissection: A preliminary study using CFD approach
  134. RADIATION PROTECTION IN AN INTERVENTIONAL LABORATORY: A COMPARATIVE STUDY OF AUSTRALIAN AND SAUDI ARABIAN HOSPITALS
  135. Coronary CT angiography in calcified coronary plaques: Comparison of diagnostic accuracy between bifurcation angle measurement and coronary lumen assessment for diagnosing significant coronary stenosis
  136. Computational fluid dynamic analysis of calcified coronary plaques: correlation between hemodynamic changes and cardiac image analysis based on left coronary bifurcation angle and lumen assessments
  137. CORONARY CT ANGIOGRAPHY IN CORONARY ARTERY DISEASE
  138. Coronary Artery Bypass Grafting Following Stent Restenosis
  139. Coronary Virtual Intravascular Endoscopy
  140. Coronary CT Angiography in Heavily Calcified Coronary Arteries
  141. Dual Energy CT Angiography of Peripheral Arterial Disease: Feasibility of Using Lower Contrast Medium Volume
  142. Coronary CT Angiography in the Quantitative Analysis of Coronary Plaques
  143. A Case Report of Gastrointestinal Basidiobolomycosis Treated with Voriconazole
  144. A Special Section on New Insights Into Advanced Digital Signal Processing and Biostatistics Techniques in Medicine
  145. Commentary: Computational Modeling of Contemporary Stent-Grafts
  146. A Systematic Review of the Efficiency of Radiation Protection Training in Raising Awareness of Medical Staff Working in Catheterisation Laboratory
  147. Pediatric Computed Tomography Dose Optimization Strategies: A Literature Review
  148. Optimal Scanning Protocols for Dual-Energy CT Angiography in Peripheral Arterial Stents: An in Vitro Phantom Study
  149. Virtual Intravascular Endoscopy Visualization of Calcified Coronary Plaques
  150. Coronary CT angiography evaluation of calcified coronary plaques by measurement of left coronary bifurcation angle
  151. High-Pitch, Low-Voltage and Low-Iodine-Concentration CT Angiography of Aorta: Assessment of Image Quality and Radiation Dose with Iterative Reconstruction
  152. A Special Section on Biomedical Imaging and Diagnosis of Cardiovascular Disease
  153. A Systematic Review of Image Quality, Diagnostic Value and Radiation Dose of Coronary CT Angiography Using Iterative Reconstruction Compared to Filtered Back Projection in the Diagnosis of Coronary Artery Disease
  154. Coronary CT Angiography with Use of Iterative Reconstruction Algorithm in Coronary Stenting: A Systematic Review of Image Quality, Diagnostic Value and Radiation Dose
  155. High Calcium Scores in Coronary CT Angiography: Effects of Image Post-Processing on Visualization and Measurement of Coronary Lumen Diameter
  156. High Pitch Dual-Source Whole Aorta CT Angiography in the Detection of Coronary Arteries: A Feasibility Study of Using Iodixanol 270 and 100 kVp with Iterative Reconstruction
  157. Numerical Methods and Applications in Biomechanical Modeling 2014
  158. Coronary Computed Tomographic Angiography in Coronary Artery Bypass Grafts
  159. Noninvasive Physiologic Assessment of Coronary Stenoses Using Cardiac CT
  160. The Design of Digital Circuit Based on DNA Strand Displacement Reaction
  161. Computational fluid dynamics in coronary artery disease
  162. Dosimetry of CT-Based Attenuation Correction for Single Photon Emission Computed Tomography/Computed Tomography Examinations
  163. Dual-Source Computed Tomography Angiography in Aortic Stenosis: Comparison with Transthoracic Echocardiography
  164. Endovascular Stents and Stent Grafts in the Treatment of Cardiovascular Disease
  165. Chest Computed Radiography Imaging Parameters for Nodule Detection: A Comparison of Image Quality and Entrance Skin Dose
  166. Incidental Extracardiac Findings on Coronary Computed Tomography Angiography: A Pictorial Review of Imaging Findings
  167. Fluid–structure interaction analysis of the left coronary artery with variable angulation
  168. Ochrobactrum anthropi induced retropharyngeal abscess with mediastinal extension complicating airway obstruction: a case report
  169. Essential Radiology: Clinical Presentation‐Pathophysiology, ImagingGundermanRB. Essential Radiology: Clinical Presentation‐Pathophysiology, Imaging. Thieme Medical Publishers, Inc., Stuttgart and New York, 2014. 344 pages, 607 illustrations, ISBN 97816...
  170. The evolution and investigation of native coronary arteries in patients after coronary stent implantation: a study by 320-detector CT angiography
  171. Local Diagnostic Reference Levels for X-Ray Examinations in an Australian Tertiary Hospital
  172. THE IMPACT OF THE NUMBER OF TEARS IN PATIENT-SPECIFIC STANFORD TYPE B AORTIC DISSECTING ANEURYSM: CFD SIMULATION
  173. A Perspective Review on Numerical Simulations of Hemodynamics in Aortic Dissection
  174. Atherosclerosis and Atheroma Plaque Rupture: Imaging Modalities in the Visualization of Vasa Vasorum and Atherosclerotic Plaques
  175. Atherosclerosis and Atheroma Plaque Rupture: Normal Anatomy of Vasa Vasorum and Their Role Associated with Atherosclerosis
  176. Coronary CT Angiography in the Quantitative Assessment of Coronary Plaques
  177. Myocardial Perfusion Imaging Using <SUP>99</SUP><I>m</I>Tc-MIBI Single Photon Emission Computed Tomography: A Cardiac Phantom Study
  178. Radiation dose associated with cerebral CT angiography and CT perfusion: an experimental phantom study
  179. Cardiac Nuclear Imaging: Current Status and Future Directions
  180. Coronary CT Angiography in the Diagnosis of Coronary Artery Disease
  181. Editorial (Thematic Issue: Cardiac Imaging in the Diagnosis of Coronary Artery Disease: A Comprehensive Overview of Various Imaging Modalities)
  182. Multiphase renal CT in the evaluation of renal masses: is the nephrographic phase necessary?
  183. Comment on: Diagnostic accuracy of 320-slice computed tomography angiography for detection of coronary artery stenosis: Meta-analysis (Int J Cardiol 2013, http://dx.doi.org/10.1016/j.ijcard.2013.03.023)
  184. A Survey Exploring Specialists and Radiographers' Perceptions of the Benefits and Challenges in Relation to Prospectively ECG-Triggered Coronary CT Angiography
  185. Cardiovascular health status in Chinese adults in urban areas: Analysis of the Chinese Health Examination Database 2010
  186. Coronary CT angiography with single-source and dual-source CT: Comparison of image quality and radiation dose between prospective ECG-triggered and retrospective ECG-gated protocols
  187. Hemodynamic impacts of various types of stenosis in the left coronary artery bifurcation: A patient-specific analysis
  188. Tips for writing a case report for the novice author
  189. An investigation of factors that influence general practitioners' referral of computed tomography scans in patients with headache
  190. Haemodynamic analysis of the effect of different types of plaques in the left coronary artery
  191. Methods in Research and Development of Biomedical Devices
  192. Coronary computed tomography angiography: an overview of clinical applications
  193. Cardiac Imaging Modalities in the Diagnosis of Coronary Artery Disease
  194. Coronary CT Angiography in Coronary Artery Disease: Correlation between Virtual Intravascular Endoscopic Appearances and Left Bifurcation Angulation and Coronary Plaques
  195. Numerical Methods and Applications in Biomechanical Modeling
  196. Radiation-Induced Noncancer Risks in Interventional Cardiology: Optimisation of Procedures and Staff and Patient Dose Reduction
  197. Significance of Coronary Calcification for Prediction of Coronary Artery Disease and Cardiac Events Based on 64-Slice Coronary Computed Tomography Angiography
  198. MEDICAL IMAGING AND COMPUTER-AIDED FLOW ANALYSIS OF A HEART WITH ATRIAL SEPTAL DEFECT
  199. Commentary: Evidence for Contrast-Enhanced Ultrasound in Fenestrated EVAR Surveillance
  200. Medical image diagnostics based on computer-aided flow analysis using magnetic resonance images
  201. Radiation dose in coronary CT angiography associated with prospective ECG-triggering technique: comparisons with different CT generations
  202. Dual-source CT coronary angiography: effectiveness of radiation dose reduction with lower tube voltage
  203. Optimization of chest radiographic imaging parameters: a comparison of image quality and entrance skin dose for digital chest radiography systems
  204. Coronary CT angiography: current status and continuing challenges
  205. Investigation of the haemodynamic environment of bifurcation plaques within the left coronary artery in realistic patient models based on CT images
  206. Coronary CT angiography: How should physicians use it wisely and when do physicians request it appropriately?
  207. Impact of plaques in the left coronary artery on wall shear stress and pressure gradient in coronary side branches
  208. Effect of calcification on the mechanical stability of plaque based on a three-dimensional carotid bifurcation model
  209. Prospective versus retrospective ECG-gated multislice CT coronary angiography: A systematic review of radiation dose and diagnostic accuracy
  210. Perforated duodenal ulcer associated with anterior abdominal abscess
  211. A systematic review of radiation dose associated with different generations of multidetector CT coronary angiography
  212. Diagnostic value of coronary CT angiography with prospective ECG-gating in the diagnosis of coronary artery disease: a systematic review and meta-analysis
  213. Computational Fluid Dynamics Analysis of the Effect of Plaques in the Left Coronary Artery
  214. Coronary artery calcium score: Re-evaluation of its predictive value for coronary artery disease
  215. Comparison of computed tomography dose reporting software
  216. Radiation dose associated with coronary CT angiography and invasive coronary angiography: an experimental study of the effect of dose-saving strategies
  217. Stress and strain behaviour modelling of the carotid bifurcation
  218. Multislice computed tomography angiography in the diagnosis of cardiovascular disease: 3D visualizations
  219. Development of an online automatic diagnostic reference levels management system for digital radiography: A pilot experience
  220. Multislice CT angiography assessment of left coronary artery: Correlation between bifurcation angle and dimensions and development of coronary artery disease
  221. Computation of hemodynamics in the left coronary artery with variable angulations
  222. Computed Tomography Imaging of Patients with Headache: Findings and Clinical Indications
  223. Coronary computed tomography angiography in coronary artery disease
  224. Haemodynamic Effect of Coronary Angulations on Subsequent Development of Coronary Artery Disease: A Preliminary Study
  225. Analysis on intra-aneurysmal flow influence by stenting
  226. Flow simulation in coronary artery models: An investigation of the effect of variable angulations at the left coronary artery
  227. Dual-source CT Angiography in Aortic Stent Grafting
  228. CT virtual intravascular endoscopy assessment of coronary artery plaques: A preliminary study
  229. Aortic dissection: Identification of entry site with CT virtual intravascular endoscopy
  230. Optimal scanning protocols of 64-slice CT angiography in coronary artery stents: An in vitro phantom study
  231. Diagnostic accuracy of 64 multislice CT angiography in the assessment of coronary in-stent restenosis: A meta-analysis
  232. Multislice CT angiography in coronary artery disease: Technical developments, radiation dose and diagnostic value
  233. Multislice CT virtual intravascular endoscopy of aortic dissection: A pictorial essay
  234. Multislice CT Virtual Intravascular Endoscopy for Assessing Pulmonary Embolisms: a Pictorial Review
  235. Development of an online automatic computed radiography dose data mining program: A preliminary study
  236. Fenestrated Stent Graft Repair of Abdominal Aortic Aneurysm: Hemodynamic Analysis of the Effect of Fenestrated Stents on the Renal Arteries
  237. Multislice CT angiography in cardiac imaging: prospective ECG-gating or retrospective ECG-gating?
  238. Multislice CT angiography of the plantar arch
  239. Plaque Formation at the Left Coronary Artery: Analysis of the Relationship between Arterial Angulations and Hemodynamics
  240. Visualizing and Interpreting Volumetric Datasets Using Volume Haptics
  241. Computed tomography virtual intravascular endoscopy in the evaluation of fenestrated stent graft repair of abdominal aortic aneurysms
  242. CT virtual endoscopy and 3D stereoscopic visualisation in the evaluation of coronary stenting
  243. 3D Virtual Intravascular Endoscopy Visualization of Coronary Artery Plaques
  244. Hemodynamic Effect of Calcified Plaque on Blood Flow in Carotid Artery Disease: A Preliminary Study
  245. The Promise of Synchrotron Radiation in Medical Science
  246. Helical CT angiography of fenestrated stent grafting of abdominal aortic aneurysms
  247. Investigation of the Hemodynamic Effect of Stent Wires on Renal Arteries in Patients with Abdominal Aortic Aneurysms Treated with Suprarenal Stent-Grafts
  248. Multi-detector row CT angiography in the assessment of coronary in-stent restenosis: A systematic review
  249. 3D Stereoscopic Visualization of Fenestrated Stent Grafts
  250. Endovascular stent graft repair of abdominal aortic aneurysms: Current status and future directions
  251. Computational Fluid Analysis of Blood Flow Characteristics in Abdominal Aortic Aneurysms Treated with Suprarenal Endovascular Grafts
  252. Investigation of Hemodynamic Changes in Abdominal Aortic Aneurysms Treated with Fenestrated Endovascular Grafts
  253. Multislice CT Angiography of Fenestrated Endovascular Stent Grafting for Treating Abdominal Aortic Aneurysms: a Pictorial Review of the 2D/3D Visualizations
  254. Computed Tomography and Radiation Dose: Is the Technique Appropriately Used for Imaging in Children?
  255. Edge Detection of the Optic Disc in Retinal Images Based on Identification of a Round Shape
  256. Effect of fenestrated stents on the renal arteries: Investigation of hemodynamic changes in abdominal aortic aneurysms treated with fenestrated endovascular grafts
  257. Multislice CT Angiography in the Follow-up of Fenestrated Endovascular Grafts:Effect of Slice Thickness on 2D and 3D Visualization of the Fenestration Stents
  258. Diagnostic value of 64-slice CT angiography in coronary artery disease: A systematic review
  259. CT Virtual Intravascular Endoscopy in the Visualization of Fenestrated Stent-Grafts
  260. Effect of Suprarenal Fixation of Aortic Stent-Grafts on the Renal Artery Ostia:Assessment of Morphological Changes by Virtual Intravascular Endoscopy
  261. Multislice CT angiography in abdominal aortic aneurysm treated with endovascular stent grafts: evaluation of 2D and 3D visualisations
  262. Suprarenal fixation of endovascular aortic stent grafts: Assessment of medium-term to long-term renal function by analysis of juxtarenal stent morphology
  263. Multislice CT angiography in aortic stent grafting: Relationship between image noise and body mass index
  264. Diagnostic Accuracy of Multislice CT Angiography in Peripheral Arterial Disease
  265. Short to Midterm Outcomes of Fenestrated Endovascular Grafts in the Treatment of Abdominal Aortic Aneurysms:A Systematic Review
  266. Diagnostic value of multislice computed tomography angiography in coronary artery disease: A meta-analysis
  267. Transrenal Fixation of Aortic Stent-Grafts: Short- to Midterm Effects on Renal Function—A Systematic Review
  268. Optimal scanning protocol of multislice CT virtual intravascular endoscopy in pre-aortic stent grafting: In vitro phantom study
  269. Diagnostic Value of Color Duplex Ultrasonography in the Follow-up of Endovascular Repair of Abdominal Aortic Aneurysma
  270. Three-Dimensional Visualization of Suprarenal Aortic Stent-Grafts:Evaluation of Migration in Midterm Follow-up
  271. 3D Multislice CT Angiography in Post-Aortic Stent Grafting: A Pictorial Essay
  272. Effect of Suprarenal Stent Struts on the Renal Artery with Ostial Calcification Observed on CT Virtual Intravascular Endoscopy
  273. Transrenal Fixation of Aortic Stent-Grafts:Current Status and Future Directions
  274. Cross-sectional area reduction of the aortic ostium by suprarenal stent wires: in vitro phantom study by CT virtual angioscopy
  275. Multislice CT Virtual Intravascular Endoscopy for Abdominal Aortic Aneurysm Stent Grafts
  276. Diagnostic Value of CT Virtual Intravascular Endoscopy in Aortic Stent-Grafting
  277. Assessment of VIE image quality using helical CT angiography: in vitro phantom study
  278. CT virtual intravascular endoscopy of abdominal aortic aneurysms treated with suprarenal endovascular stent grafting
  279. Helical CT Angiography of Abdominal Aortic Aneurysms Treated with Suprarenal Stent Grafting: A Pictorial Essay
  280. Abdominal aortic aneurysm and stent graft phantom manufactured by medical rapid prototyping