All Stories

  1. Laboratory shear bond test for chip-seal under varying environmental and material conditions
  2. Moisture Susceptibility of Warm Mix Asphalt (WMA) with an Organic Wax Additive Based on X-Ray Computed Tomography (CT) Technology
  3. Pavement performance zone based on mechanistic-empirical design and temperature indices
  4. Advanced Pavement Materials for Sustainable Transportation Infrastructure
  5. Using DSR and FTIR to Evaluate Asphalt Binder Extracted and Recovered from Asphalt Mixtures
  6. Performance of Micro- and Nano-Modified Asphalt Mixtures Through Flow Number and Moisture Susceptibility Evaluations
  7. Mineral Aggregate Morphological Evaluation
  8. Investigation of microwave healing performance of electrically conductive carbon fiber modified asphalt mixture beams
  9. Modification mechanism of asphalt binder with waste tire rubber and recycled polyethylene
  10. Compaction temperatures of Sasobit produced warm mix asphalt mixtures modified with SBS
  11. Updating and augmenting weather data for pavement mechanistic-empirical design using ASOS/AWOS database in Michigan
  12. Innovation of aggregate angularity characterization using gradient approach based upon the traditional and modified Sobel operation
  13. Study on microstructure of rubberized recycled hot mix asphalt based X-ray CT technology
  14. Rheological Properties of Modified Coal Tar Pitches
  15. Review on heterogeneous model reconstruction of stone-based composites in numerical simulation
  16. Three-Dimensional Finite-Element Modeling for Asphalt Concrete Using Visual Cross-Sectional Imaging and Indirect Element Meshing Based on Discrete-Element Models
  17. A New Method for Characterizing Coarse Aggregate Morphology through a MATLAB Program
  18. Evaluations of Plant-Produced Foamed Warm Mixture Asphalt
  19. Air temperature based climate zones for flexible pavement designs
  20. Rheological properties, low-temperature cracking resistance, and optical performance of exfoliated graphite nanoplatelets modified asphalt binder
  21. Determination of Specific Heat Capacity on Composite Shape-Stabilized Phase Change Materials and Asphalt Mixtures by Heat Exchange System
  22. A simple treatment of electronic-waste plastics to produce asphalt binder additives with improved properties
  23. Ethanol based foamed asphalt as potential alternative for low emission asphalt technology
  24. A hybrid strategy in selecting diverse combinations of innovative sustainable materials for asphalt pavements
  25. Microstructural Modeling Method for Asphalt Specimens Supporting 3D Adaptive and Automatic Mesh Generation
  26. Performance Analysis of Direct Coal Liquefaction Residue (DCLR) and Trinidad Lake Asphalt (TLA) for the Purpose of Modifying Traditional Asphalt
  27. Performance evaluation of warm mix asphalt containing reclaimed asphalt mixtures
  28. Characterization of Low Temperature Crack Resistance of Crumb Rubber Modified Asphalt Mixtures Using Semi-Circular Bending Tests
  29. Nanoclay modified asphalt
  30. Molecular dynamics simulation of physicochemical properties of the asphalt model
  31. Effectiveness of Micro- and Nanomaterials in Asphalt Mixtures through Dynamic Modulus and Rutting Tests
  32. The Effect of Morphological Characteristic of Coarse Aggregates Measured with Fractal Dimension on Asphalt Mixture’s High-Temperature Performance
  33. Fourier Transform Infrared Spectroscopy characterization of aging-related properties of original and nano-modified asphalt binders
  34. Laboratory moisture susceptibility evaluation of WMA under possible field conditions
  35. Chemo-physical analysis and molecular dynamics (MD) simulation of moisture susceptibility of nano hydrated lime modified asphalt mixtures
  36. Sensitivity of flexible pavement design to Michigan’s climatic inputs using pavement ME design
  37. Characteristics of a Surfactant Produced Warm Mix Asphalt Binder and Workability of the Mixture
  38. Characterization of the rate of change of rheological properties of nano-modified asphalt
  39. Effects of Regular-Sized and Nanosized Hydrated Lime on Binder Rheology and Surface Free Energy of Adhesion of Foamed Warm Mix Asphalt
  40. Integrated Experimental-Numerical Approach for Estimating Asphalt Mixture Induction Healing Level through Discrete Element Modeling of a Single-Edge Notched Beam Test
  41. Estimation of cumulative energy demand and green house gas emissions of ethanol foamed WMA using life cycle assessment analysis
  42. Automated real aggregate modelling approach in discrete element method based on X-ray computed tomography images
  43. Aggregate representation for mesostructure of stone based materials using a sphere growth model based on realistic aggregate shapes
  44. Asphalt Binders Blended with a High Percentage of Biobinders: Aging Mechanism Using FTIR and Rheology
  45. Synthesis of Longitudinal Joint of Flexible Pavement
  46. Effects of mean annual temperature and mean annual precipitation on the performance of flexible pavement using ME design
  47. New Predictive Equations for Dynamic Modulus and Phase Angle Using a Nonlinear Least-Squares Regression Model
  48. High temperature performance evaluation of bio-oil modified asphalt binders using the DSR and MSCR tests
  49. Sensitivity analysis of longitudinal cracking on asphalt pavement using MEPDG in permafrost region
  50. Moisture Susceptibility Evaluation of Nanosize Hydrated Lime-Modified Asphalt-Aggregate Systems Based on Surface Free Energy Concept
  51. Laboratory performance of warm mix asphalt containing recycled asphalt mixtures
  52. Moisture susceptibility of Nano-sized Hydrated Lime-modified foamed Warm Mix Asphalt mixes
  53. Rheological Properties of Short-Term Aged Foamed Asphalt Modified with Nano Hydrated Lime
  54. Evaluation of Foam-based Warm Mix Asphalt Modified with Nano-sized Hydrated Lime Using Multiple Creep and Recovery Tests
  55. Rheological Characteristics of Nano-Sized Hydrated Lime-Modified Foamed Warm Mix Asphalt
  56. Aging Influence on Rheology Properties of Petroleum-Based Asphalt Modified with Biobinder
  57. Three-dimensional modeling and simulation of asphalt concrete mixtures based on X-ray CT microstructure images
  58. Mechanical performance of asphalt mixtures modified by bio-oils derived from waste wood resources
  59. Rheological Evaluation of Foamed WMA Modified with Nano Hydrated Lime
  60. Performances Evaluation of Cecabase® RT in Warm Mix Asphalt Technology
  61. Rheological Properties and Chemical Bonding of Asphalt Modified with Nanosilica
  62. Comparative study on the properties of WMA mixture using foamed admixture and free water system
  63. Optimum Test Section on Simulation Test of Asphalt Mixtures
  64. Study on the rubber-modified asphalt mixtures’ cracking propagation using the extended finite element method
  65. Analysis on fatigue crack growth laws for crumb rubber modified (CRM) asphalt mixture
  66. A Simple Approach to Estimating Dynamic Moduli from Resilient Moduli for the Mechanistic Empirical Design of Asphalt Pavements
  67. Development of a Realistic Conditioning and Evaluation System to Study Moisture Damage of Asphalt Materials
  68. Review on advances in modeling and simulation of stone-based paving materials
  69. Preparation of composite shape-stabilized phase change materials for highway pavements
  70. Performance of Warm Mix Asphalt containing Sasobit®: State-of-the-art
  71. Development and Application of the Single-Spiral Inductive-Capacitive Resonant Circuit Sensor for Wireless, Real-Time Characterization of Moisture in Sand
  72. Evaluation of Asphalt Blended With Low Percentage of Carbon Micro-Fiber and Nanoclay
  73. Rheological properties and chemical analysis of nanoclay and carbon microfiber modified asphalt with Fourier transform infrared spectroscopy
  74. Three-dimensional discrete element modeling of asphalt concrete: Size effects of elements
  75. Analysis of the Low-Temperature Rheological Properties of Rubberized Warm Mix Asphalt Binders
  76. Partial replacement of asphalt binder with bio-binder: characterisation and modification
  77. Effect of warm mixture asphalt (WMA) additives on high failure temperature properties for crumb rubber modified (CRM) binders
  78. Properties of Modified Asphalt Binders Blended with Electronic Waste Powders
  79. Performance of asphalt binder blended with non-modified and polymer-modified nanoclay
  80. Laboratory evaluation on the high temperature rheological properties of rubber asphalt: a preliminary study
  81. High-Temperature Viscosity Performance of Crumb-Rubber-Modified Binder With Warm Mix Asphalt Additives
  82. Discrete Element Modeling of Pavement-Wheel Frictional Force
  83. Evaluation of Hot-Mix Asphalt Distress under Rapid Freeze-Thaw Cycles Using Image Processing Technique
  84. Effect of Hydrated Lime Application Method on Mechanical and Fatigue Properties of HMA
  85. Evaluation of the Master Curves for Complex Shear Modulus for Nano-Modified Asphalt Binders
  86. Preliminary Study of Materials Effect of Cold In-Place and Full-Depth Reclamation Asphalt Concrete in Mechanistic-Empirical Pavement Design
  87. Exploring the Interactions of Chloride Deicer Solutions with Nanomodified and Micromodified Asphalt Mixtures Using Artificial Neural Networks
  88. Predictive models for dynamic modulus using weighted least square nonlinear multiple regression model
  89. The determination of mechanical performance of laboratory produced hot mix asphalt mixtures using controlled RAP and virgin aggregate size fractions
  90. The properties of asphalt binder blended with variable quantities of recycled asphalt using short term and long term aging simulations
  91. Mechanical Properties of Porous Asphalt Pavement Materials with Warm Mix Asphalt and RAP
  92. Laboratory evaluation on high temperature viscosity and low temperature stiffness of asphalt binder with high percent scrap tire rubber
  93. Determination of Flow Number in Asphalt Mixtures from Deformation Rate During Secondary State
  94. Coal Gangue Applied to Low-Volume Roads in China
  95. Chemical Characterization of Biobinder from Swine Manure: Sustainable Modifier for Asphalt Binder
  96. Evaluation of Low-Temperature Binder Properties of Warm-Mix Asphalt, Extracted and Recovered RAP and RAS, and Bioasphalt
  97. Review of advances in understanding impacts of mix composition characteristics on asphalt concrete (AC) mechanics
  98. Low Temperature Cracking Potential of Aged Asphalts Using Simulated Aging Techniques
  99. Intermediate Temperature Fatigue and Low Temperature Cracking Properties of Rubber Asphalt Binder
  100. Properties of Recovered Asphalt Binder Blended with Waste Engine Oil: A Preliminary Study
  101. Characterization of the Viscoelastic Property of Asphalt Mastic
  102. Evaluation of Warm Mix Asphalt Produced at Various Temperatures through Dynamic Modulus Testing and Four Point Beam Fatigue Testing
  103. Accelerated Discrete-Element Modeling of Asphalt-Based Materials with the Frequency-Temperature Superposition Principle
  104. Investigating the Sensitivity of Aggregate Size within Sand Mastic by Modeling the Microstructure of an Asphalt Mixture
  105. Discrete-Element Modeling: Impacts of Aggregate Sphericity, Orientation, and Angularity on Creep Stiffness of Idealized Asphalt Mixtures
  106. Evaluation of Recycled Asphalt Shingles in Hot Mix Asphalt
  107. Moisture Damage and Fatigue Cracking of Foamed Warm Mix Asphalt Using a Simple Laboratory Setup
  108. Nanoclay-modified asphalt materials: Preparation and characterization
  109. Nanoclay-Modified Asphalt Binder Systems
  110. Effect of deicing solutions on the tensile strength of micro- or nano-modified asphalt mixture
  111. Special Issue on Multiscale and Micromechanical Modeling of Asphalt Mixes
  112. Preliminary Dynamic Modulus Criteria of HMA for Field Rutting of Asphalt Pavements: Michigan’s Experience
  113. Three-Dimensional Microstructural-Based Discrete Element Viscoelastic Modeling of Creep Compliance Tests for Asphalt Mixtures
  114. 3D discrete element models of the hollow cylindrical asphalt concrete specimens subject to the internal pressure
  115. Air void effect on an idealised asphalt mixture using two-dimensional and three-dimensional discrete element modelling approach
  116. Stiffness of Sand Mastic versus Stiffness of Asphalt Binder Using Three-Dimensional Discrete Element Method
  117. Discrete Element Simulation of Aggregate Sphericity and Orientation: An Approach to Improving the Understanding of Asphalt Concrete
  118. Postprocessing Method for Dynamic Modulus Tests of Hot-Mix Asphalt
  119. Three-Dimensional Discrete Element Simulation of Asphalt Concrete Subjected to Haversine. Loading An Application of the Frequency-Temperature Superposition Technique
  120. A Microstructure-Based Approach for Simulating Viscoelastic Behaviors of Asphalt Mixtures
  121. Formulization of Asphalt Concrete Stiffness for Specific Microstructures Based on Discrete Element Method
  122. The mechanical properties of asphalt mixtures with Recycled Concrete Aggregates
  123. The Carbonization Characteristics Studies of Corn Stalk in a Fixed Bed Reactor
  124. Three-Dimensional Discrete Element Simulation of Asphalt Concrete Subjected to Haversine Loading
  125. Evaluation of Fatigue Models of Hot-Mix Asphalt Through Laboratory Testing
  126. A simple stepwise method to determine and evaluate the initiation of tertiary flow for asphalt mixtures under dynamic creep test
  127. Visualization and Simulation of Asphalt Concrete with Randomly Generated Three-Dimensional Models
  128. Warm Mix Asphalt Using Sasobit in Cold Region
  129. Preliminary Study of Evaluating Asphalt Pavement Rutting Performance Using the Mechanistic-Empirical Pavement Design Guide
  130. The Pollution Characteristics Analysis of Benzene Series in a Newly Decorated Office Building
  131. Biogas power plants waste heat utilization researches
  132. Viscoelastic Model for Discrete Element Simulation of Asphalt Mixtures
  133. Determining the specific gravities of coarse aggregates utilizing vacuum saturation approach
  134. Getting the Results You Want
  135. Front Matter
  136. Back Matter
  137. Modeling of Hollow Cylindrical Asphalt Mixture Specimens
  138. A Large Deformation Finite Element Formulation for Subgrade Soil Compaction
  139. Determining Burger's Model Parameters of Asphalt Materials Using Creep-Recovery Testing Data
  140. A Simple Method to Determine the Tertiary Flow in Repeated Load Test: A Step-Wise Method
  141. Three-Dimensional Discrete Element Models for Asphalt Mixtures
  142. A Wireless, Passive Embedded Sensor for Real-Time Monitoring of Water Content in Civil Engineering Materials
  143. Properties of Asphalt Mixtures with RAP in the Mechanistic-Empirical Pavement Design of Flexible Pavements: A Preliminary Investigation
  144. Measuring the Specific Gravity and Absorption of Steel Slag and Crushed Concrete Coarse Aggregates: A Preliminary Study
  145. On the Mechanical Modeling of Asphalt Matrix and Hot Mix Asphalt Mixtures
  146. Speed Up Discrete Element Simulation of Asphalt Mixtures with User-Written C++ Codes
  147. A preliminary study of the mechanical properties of asphalt mixture containing bottom ash
  148. Front Matter
  149. Back Matter
  150. Two Dimensional and Three Dimensional Discrete Element Models for HMA
  151. DEM Models of Idealized Asphalt Mixtures
  152. A Three-Dimensional Micro-Frame Element Network Model for Damage Behavior of Asphalt Mixtures
  153. Dynamic modulus simulation of the asphalt concrete using the X-ray computed tomography images
  154. Dynamic Moduli for M-E Design of Asphalt Pavements
  155. Micromechanical Finite Element Models for Micro-Damage and Complex Constitutive Behavior of Asphalt Mixes
  156. Temperature Gradient of RCC-AC Composite Pavements
  157. Resilient Modulus and Dynamic Modulus of Warm Mix Asphalt
  158. The Dynamic Modulus of Asphalt Mixture with Bottom Ash Aggregates
  159. Simulation of Cyclic Loading Tests for Asphalt Mixtures Using User Defined Models within Discrete Element Method
  160. Prediction of Dynamic Modulus of Asphalt Concrete Using Two-Dimensional and Three-Dimensional Discrete Element Modeling Approach
  161. Dynamic complex modulus predictions of hot-mix asphalt using a micromechanical-based finite element model
  162. Micromechanical finite element framework for predicting viscoelastic properties of asphalt mixtures
  163. Investigation of Linear and Damage-Coupled Viscoelastic Properties of Sustainable Asphalt Mixture Using a Micromechanical Finite Element Approach
  164. Aggregate Effect on Asphalt Mixture Properties by Modeling Particle-to-Particle Interaction
  165. Review of advances in micromechanical modeling of aggregate–aggregate interactions in asphalt mixtures
  166. Prediction of Creep Stiffness of Asphalt Mixture with Micromechanical Finite-Element and Discrete-Element Models
  167. Micromechanical Modeling Approach to Predict Compressive Dynamic Moduli of Asphalt Mixtures Using the Distinct Element Method
  168. A micromechanical finite element model for linear and damage-coupled viscoelastic behaviour of asphalt mixture
  169. A Micromechanical Viscoelasto-Plastic Model for Asphalt Mixture
  170. Development and Implementation of a Finite Element Model for Asphalt Mixture to Predict Compressive Complex Moduli at Low and Intermediate Temperatures
  171. Application of Discrete Element Modeling Techniques to Predict the Complex Modulus of Asphalt-Aggregate Hollow Cylinders Subjected to Internal Pressure
  172. Finite Element Analysis of Concrete Pavements Over Culverts
  173. Discrete Element Modeling of Asphalt Concrete: Microfabric Approach