All Stories

  1. Entropy-Based Correlation Analysis of the Dynamic Modulus and High-Temperature Properties of Rubber-Plastic Composite Modified Asphalt Mixtures
  2. Utilizing Pyrolysis Product from Off-grade Rubber Waste for Different Bio-oil Applications and Cold Mix Asphalt Productions
  3. Loading Distributions in Asphalt Mixtures with the Virtual Dynamic Modulus Test
  4. Key Strategies to Improve the Mechanical Strength and Toughness of Hydrogels: A Review
  5. A Lightweight Detection Algorithm for Pavement Structure Distress Based on Ground-Penetrating Radar Investigation and Joint Pruning
  6. Recreation of Horizontal Alignment Using Vehicle Trajectory
  7. A Scoping Review: Applications of Deep Learning in Non-Destructive Building Tests
  8. Review of Nanomaterials in Pavement Engineering
  9. Aggregate stress contribution in asphalt mixtures with the splitting tests based on the three-dimensional (3D) discrete element method (DEM)
  10. Molecular dynamics simulation on oxidation process and interfacial performance of foamed asphalt binders based on ReaxFF force field
  11. The arsenic determination in glass beads for pavement marking by two-factor ANOVA via hydride generation high-resolution continuous light source atomic absorption spectrometry
  12. Influence of direct coal liquefaction residue (DCLR) on the rutting behavior of asphalt mixture with the discrete element method
  13. Perspectives on the Application of Waste Materials in Asphalt Based on Molecular Dynamics Simulations: A Review
  14. Properties of ethanol-based foamed asphalt binders using the molecular dynamics (md) method
  15. Development and optimization of object detection technology in pavement engineering: A literature review
  16. Influence of compatibilization methods on the compatibility between asphalt and DCLR components with molecular dynamics (MD) method
  17. Investigations on Strength Characteristics of High-Modulus Asphalt Mixtures under Different Conditions
  18. A literature review: asphalt pavement repair technologies and materials
  19. Encoder–decoder with pyramid region attention for pixel‐level pavement crack recognition
  20. Early Strength of Cold Recycled Emulsified Asphalt Mixtures
  21. Data-driven analysis on the subbase strain prediction: A deep data augmentation-based study
  22. Advanced industrial informatics towards smart, safe and sustainable roads: A state of the art
  23. Editorial: “Functional pavement and advanced material testing technology”
  24. Compatibility investigation of waste plastics in bitumen via a molecular dynamics method
  25. Investigation on the fractal characteristic of asphalt pavement texture roughness incorporating 3D reconstruction technology
  26. 3D Geometry Modeling and Safety Compliance Assessment of In-Service Roads Using Massive LiDAR Point Clouds
  27. A Detection Method for Pavement Cracks Combining Object Detection and Attention Mechanism
  28. Mechanism exploration of the foamed asphalt binder using the Molecular Dynamics (MD) method
  29. Uniform fatigue characterization of high modulus asphalt mixtures under three-dimensional stress state
  30. Rail Sample Laboratory Evaluation of Eddy Current Rail Inspection Sustainable System
  31. Towards a sustainable monitoring: A self-powered smart transportation infrastructure skin
  32. Cost-effective assessment of in-service asphalt pavement condition based on Random Forests and regression analysis
  33. Literature Review on the Discrete Element Method in Asphalt Mixtures
  34. Review on Applications of Lignin in Pavement Engineering: A Recent Survey
  35. Discussion on molecular dynamics (MD) simulations of the asphalt materials
  36. Editorial: Development and Application of Bituminous Materials for Civil Infrastructures
  37. Investigation of the Interface Condition Influence on Backcalculated Layer Properties
  38. Generation and properties of the new asphalt binder model using molecular dynamics (MD)
  39. Compaction Characteristics of Cold Recycled Mixtures with Asphalt Emulsion and Their Influencing Factors
  40. Gradation Design and Performance Evaluation of High Viscosity Asphalt Mixtures
  41. How to Achieve Efficiency and Accuracy in Discrete Element Simulation of Asphalt Mixture: A DRF-Based Equivalent Model for Asphalt Sand Mortar
  42. Identifying Key Bus Stations Based on Complex Network Theory considering the Hybrid Influence and Passenger Flow: A Case Study of Beijing, China
  43. Unified Strength Models of an Asphalt Mixture under Different Temperatures and Three-Dimensional Stresses
  44. Effects of Tire Pressures and Test Temperatures on Permanent Deformation of Direct Coal Liquefaction Residue Mixture
  45. Comparison of performances of early aged pre-vibrated cement-stabilized macadam formed by different compactions
  46. Preparation and Performance Analysis of High-Viscosity and Elastic Recovery Modified Asphalt Binder
  47. A numerical study on rutting behaviour of direct coal liquefaction residue modified asphalt mixture
  48. Effects of adhesives on properties and mechanism of the ultra-thin pavement
  49. Correlation of DSR Results and FTIR’s Carbonyl and Sulfoxide Indexes: Effect of Aging Temperature on Asphalt Rheology
  50. Evaluation of contact angle between asphalt binders and aggregates using Molecular Dynamics (MD) method
  51. Moisture Susceptibility of Warm Mix Asphalt (WMA) with an Organic Wax Additive Based on X-Ray Computed Tomography (CT) Technology
  52. Material selections in asphalt pavement for wet-freeze climate zones: A review
  53. Preparation and Properties of Waterborne Epoxy–Modified Emulsified Asphalt Binder (WEMEAB)
  54. Analysis of performance and mechanism of Buton rock asphalt modified asphalt
  55. Modulus simulation of asphalt binder models using Molecular Dynamics (MD) method
  56. Comparisons of synchronous measurement methods on various moduli of asphalt mixtures
  57. Preparation and Properties of Asphalt Binders Modified by THFS Extracted From Direct Coal Liquefaction Residue
  58. Rapid microwave irradiation synthesis of carbon nanotubes on graphite surface and its application on asphalt reinforcement
  59. Investigation of the asphalt–aggregate interaction using molecular dynamics
  60. Effectiveness of Vegetable Oils as Rejuvenators for Aged Asphalt Binders
  61. Adhesion Evaluation of Asphalt-Aggregate Interface Using Surface Free Energy Method
  62. Performance of Micro- and Nano-Modified Asphalt Mixtures Through Flow Number and Moisture Susceptibility Evaluations
  63. Property Analysis of Exfoliated Graphite Nanoplatelets Modified Asphalt Model Using Molecular Dynamics (MD) Method
  64. Properties of Direct Coal Liquefaction Residue Modified Asphalt Mixture
  65. Behavior characteristic of Rubber Powder Modifier (RPM) during ageing process of Rubber Modified Asphalt (RMA)
  66. Rheological Properties of Modified Coal Tar Pitches
  67. Evaluations of Plant-Produced Foamed Warm Mixture Asphalt
  68. Rheological properties, low-temperature cracking resistance, and optical performance of exfoliated graphite nanoplatelets modified asphalt binder
  69. Performance Analysis of Direct Coal Liquefaction Residue (DCLR) and Trinidad Lake Asphalt (TLA) for the Purpose of Modifying Traditional Asphalt
  70. Molecular dynamics simulation of physicochemical properties of the asphalt model
  71. Effectiveness of Micro- and Nanomaterials in Asphalt Mixtures through Dynamic Modulus and Rutting Tests
  72. Molecular Dynamics (MD) Model Generation for the Graphite Nanoplatelets Modified Asphalt
  73. Fourier Transform Infrared Spectroscopy characterization of aging-related properties of original and nano-modified asphalt binders
  74. Chemo-physical analysis and molecular dynamics (MD) simulation of moisture susceptibility of nano hydrated lime modified asphalt mixtures
  75. Characterization of the rate of change of rheological properties of nano-modified asphalt
  76. Design and preparation of natural layered silicate/bio-based elastomer nanocomposites with improved dispersion and interfacial interaction
  77. Preparation of graphene oxide/bio-based elastomer nanocomposites through polymer design and interface tailoring
  78. Solution of pavement temperature field in “Environment-Surface” system through Green’s function
  79. Enhancing the air impermeability of a biobased poly(di-isoamyl itaconate-co-isoprene) elastomer via the cocoagulation of latex and natural layered silicates
  80. Rheological Properties and Chemical Bonding of Asphalt Modified with Nanosilica
  81. Performance of Nanomodified Asphalt Binder and Mixture
  82. Evaluation of Asphalt Blended With Low Percentage of Carbon Micro-Fiber and Nanoclay
  83. Rheological properties and chemical analysis of nanoclay and carbon microfiber modified asphalt with Fourier transform infrared spectroscopy
  84. Morphology, interfacial interaction, and properties of a novel bioelastomer reinforced by silica and carbon black
  85. Performance of asphalt binder blended with non-modified and polymer-modified nanoclay
  86. Evaluation of the Master Curves for Complex Shear Modulus for Nano-Modified Asphalt Binders
  87. Preliminary Study of Materials Effect of Cold In-Place and Full-Depth Reclamation Asphalt Concrete in Mechanistic-Empirical Pavement Design
  88. Microstructure and Performance Analysis of Nanomaterials Modified Asphalt
  89. Effect of Unsaturated Flow on the Groundwater Table in Drainage Layer and Saturated Model Modification
  90. Gradation and Performance Research of Cold Recycled Mixture
  91. Method of Design for Improving the Drainage Layer of Asphalt Pavement
  92. Study on Transfer Behavior of Negative Friction of Single Pile in Two-Layer Soil