All Stories

  1. Ultrafast dynamics of carrier relaxation determining the quasi-1D and non-1D electronic behaviors in carbon nanostructures
  2. Unravelling the role of inter CNT yarn–yarn interactions in governing the failure behavior in a unidirectional CNT yarn-reinforced plastic composite
  3. Enhanced capacity of aluminum-ion batteries by adjusting the average pore size of the porous carbon cathode
  4. Photoinduced dynamics during electronic transfer from narrow to wide bandgap layers in one-dimensional heterostructured materials
  5. Phenolphthalein: A Potent Small-Molecule Additive for High-Performance and Ambient-Air-Stable FAPbI3 Perovskite Solar Cells
  6. N‐DMBI Doping of Carbon Nanotube Yarns for Achieving High n‐Type Thermoelectric Power Factor and Figure of Merit
  7. Intermediate State between MoSe2 and Janus MoSeS during Atomic Substitution Process
  8. Self-Limiting Growth of Monolayer Tungsten Disulfide Nanoribbons on Tungsten Oxide Nanowires
  9. Integration of Wireless Power Transfer Technology With Hierarchical Multiwalled Carbon Nanotubes-Polydimethylsiloxane Piezo-Responsive Pressure Sensor for Remote Force Measurement
  10. Dispersion stability of tin(IV) oxide nanoparticles in polar solvents and water aided by ultrasonication
  11. Characteristics of Vertical Ga2O3 Schottky Junctions with the Interfacial Hexagonal Boron Nitride Film
  12. Surface Diffusion-Limited Growth of Large and High-Quality Monolayer Transition Metal Dichalcogenides in Confined Space of Microreactor
  13. Generation of sub-100 fs electron pulses for time-resolved electron diffraction using a direct synchronization method
  14. Zinc‐Based Metal–Organic Frameworks for High‐Performance Supercapacitor Electrodes: Mechanism Underlying Pore Generation
  15. Copper-incorporation for polytypism and bandgap engineering of MAPbBr3 perovskite thin films with enhanced near-Infrared photocurrent-response
  16. Structure modulation for bandgap engineered vacancy-ordered Cs3Bi2Br9 perovskite structures through copper alloying
  17. Challenges for developing photo-induced phase transition (PIPT) systems: From classical (incoherent) to quantum (coherent) control of PIPT dynamics
  18. Supercapacitor electrode with high charge density based on boron-doped porous carbon derived from covalent organic frameworks
  19. Temperature-dependent device properties of γ-CuI and β-Ga2O3 heterojunctions
  20. Memristive Behavior in One-Dimensional Hexagonal Boron Nitride/Carbon Nanotube Heterostructure Assemblies
  21. Single crystal of two-dimensional mixed-halide copper-based perovskites with reversible thermochromism
  22. Super-chiral vibrational spectroscopy with metasurfaces for high-sensitive identification of alanine enantiomers
  23. Synthesis and characterization of conductive flexible cellulose carbon nanohorn sheets for human tissue applications
  24. Synthesis and Characterization of Human Skin-Compatible Conductive Flexible Cellulose Carbon Nanohorn Sheets
  25. Synthesis of solvent-free conductive and flexible cellulose–carbon nanohorn sheets and their application as a water vapor sensor
  26. Synthesis and characterization of conductive flexible cellulose carbon nanohorn sheets for human tissue applications
  27. Systematic Investigations of Annealing and Functionalization of Carbon Nanotube Yarns
  28. The critical role of the forest morphology for dry drawability of few-walled carbon nanotubes
  29. Influence of pressure of nitrogen gas on structure and thermoelectric properties of acid-treated PEDOT:PSS films
  30. Temperature dependence of pressure-driven water permeation through membranes consisting of vertically-aligned double-walled carbon nanotube arrays
  31. High-performance structure of a coil-shaped soft-actuator consisting of polymer threads and carbon nanotube yarns
  32. Expansion of Shockley stacking fault observed by scanning electron microscope and partial dislocation motion in 4H-SiC
  33. Simultaneous improvement in electrical conductivity and Seebeck coefficient of PEDOT:PSS by N2pressure-induced nitric acid treatment
  34. Structural Monitoring of the Onset of Excited-State Aromaticity in a Liquid Crystal Phase
  35. Automated design of infrared digital metamaterials by genetic algorithm
  36. Water transport phenomena through membranes consisting of vertically-aligned double-walled carbon nanotube array
  37. Synthesis of Hybrid Carbon Nanoparticles Using Multi-Walled Carbon Nanotubes and Fullerene via Self-Assembly
  38. Cross-Polarized Surface-Enhanced Infrared Spectroscopy by Fano-Resonant Asymmetric Metamaterials
  39. Simple Technique of Exfoliation and Dispersion of Multilayer Graphene from Natural Graphite by Ozone-Assisted Sonication
  40. Ultrasonic-assisted synthesis of ZnO nano particles decked with few layered graphene nanocomposite as photoanode in dye-sensitized solar cell
  41. Surface modification of carbon nanohorns by helium plasma and ozone treatments
  42. Controlled Fano resonances via symmetry breaking in metamaterials for high-sensitive infrared spectroscopy
  43. Multilayer graphene/amorphous carbon hybrid films prepared by microwave surface-wave plasma CVD: synthesis and characterization
  44. Self-assembled C60 Fullerene Cylindrical nanotubes by LLIP method
  45. Effect of ultraviolet light irradiation and ion collision on the quality of multilayer graphene prepared by microwave surface-wave plasma chemical vapor deposition
  46. Carbon nanostructures synthesized via self-assembly (LLIP) and its application in FET
  47. Synthesis and transistor application of the extremely extended phenacene molecule, [9]phenacene
  48. DC Biasing Effects on Properties of Carbon Nanowalls by Microwave Surface-Wave Plasma Chemical Vapor Deposition and Towards Transparent Electrode
  49. Dispersion of Relatively Long Multi-walled Carbon Nanotubes in Water using Ozone Generated by Dielectric Barrier Discharge
  50. Ultrafast Snapshots of the Molecules Twisting in Liquid Crystal State
  51. Single- and double-walled carbon nanotubes enhance atherosclerogenesis by promoting monocyte adhesion to endothelial cells and endothelial progenitor cell dysfunction
  52. Improved properties of Carbon nanotube yarn spun from dense and long carbon nanotube forest
  53. In situ observation of carbon nanotube yarn during voltage application
  54. Transistors fabricated using the single crystals of [8]phenacene
  55. Synergistic Effect of Bolus Exposure to Zinc Oxide Nanoparticles on Bleomycin-Induced Secretion of Pro-Fibrotic Cytokines without Lasting Fibrotic Changes in Murine Lungs
  56. Highly transparent and flexible field electron emitters based on hybrid carbon nanostructure
  57. Fabrication of metal nanoparticles from metal-filled carbon nanofibers and their size control by heating
  58. Photovoltaic properties of an amorphous carbon/fullerene junction
  59. Study of intercalation compounds using ionic liquids into montmorillonite and their thermal stability
  60. Phthalocyanine with Trifluoroethoxy Substituents for Organic Solar Cells
  61. Influence of gas composition on the formation of graphene domain synthesized from camphor
  62. A photoinduced charge transfer composite of graphene oxide and ferrocene
  63. Phenol resin carbonized films with anisotropic shrinkage driven ordered mesoporous structures
  64. Synthesis of continuous graphene on metal foil for flexible transparent electrode application
  65. Structural and Electrical Properties of Ozone Irradiated Carbon Nanotube Yarns and Sheets
  66. In SituTEM Observation of Fe-Included Carbon Nanofiber: Evolution of Structural and Electrical Properties in Field Emission Process
  67. Pre-treatment of multi-walled carbon nanotubes for polyetherimide mixed matrix hollow fiber membranes
  68. Synthesis of graphene by surface wave plasma chemical vapor deposition from camphor
  69. Transparent and flexible field emission display device based on single-walled carbon nanotubes
  70. Large-area CVD graphene as transparent electrode for efficient organic solar cells
  71. Fundamental Study on Organic Solar Cells Based on Soluble Zinc Phthalocyanine
  72. In-situ observation of carbon nanotube fiber spinning from vertically aligned carbon nanotube forest
  73. Effect of defects in ferromagnetic C doped ZnO thin films
  74. Controllable fabrication and characterization of conical nanocarbon structures on polymer substrate for transparent and flexible field emission displays
  75. Low-Temperature Fabrication of Germanium Nanostructures by Ion Irradiation: Effect of Supplied Particle Species
  76. Synthesis of transfer-free graphene on an insulating substrate using a solid phase reaction
  77. Fabrication of ZnO nanoparticles confined in the channels of mesoporous carbon
  78. Growth and structure analysis of tungsten oxide nanorods using environmental TEM
  79. High temperature in-situ observations of multi-segmented metal nanowires encapsulated within carbon nanotubes by in-situ filling technique
  80. Low-Temperature Fabrication of Germanium Nanostructures by Ion Irradiation: Effect of Supplied Particle Species
  81. Direct Growth of Horizontally Aligned Carbon Nanotubes between Electrodes and Its Application to Field-Effect Transistors
  82. Fabrication of Ion-Induced Carbon-Cobalt Nanocomposite Fibers: Effect of Cobalt Supply Rate
  83. POLY(3, 4-ETHYLENEDIOXYTHIOPHENE): POLY(STYRENESULFONATE)/SINGLE-WALL CARBON NANOTUBE COMPOSITE FILM FOR THE HOLE TRANSPORT LAYER IN POLYMER SOLAR CELLS
  84. Determination of Young’s modulus of carbon nanofiber probes fabricated by the argon ion bombardment of carbon coated silicon cantilever
  85. Fabrication of Ge nanoneedles by ion-irradiation method
  86. Carbon Nanotubes Based Mixed Matrix Membrane for Gas Separation
  87. Preparation and Characterization of Electrical, Optical and Magnetic Properties of Hydrogenated Multilayer ZnO/Co Thin Films
  88. High-Resolution Imaging of Plasmid DNA in Liquids in Dynamic Mode Atomic Force Microscopy Using a Carbon Nanofiber Tip
  89. Morphology control of a rapidly grown vertically aligned carbon-nanotube forest for fiber spinning
  90. Growth evolution of rapid grown aligned carbon nanotube forests without water vapor on Fe/Al2O3/SiO2/Si substrate
  91. Structural change of ion-induced carbon nanofibers by electron current flow
  92. A case of adult patient ductus arteriosus with congestive heart failure and severe mitral regurgitation
  93. Electrical property of carbon nanotube Fiber spun from vertically aligned carbon nanotube forest
  94. Growth and structure analysis of tungsten oxide nanorods using environmental transmission electron microscopy
  95. The growth and characterization of Zn nanowires covered with ZnO using plasma-assisted molecular beam irradiation
  96. Gas separation properties of functionalized carbon nanotubes mixed matrix membranes
  97. Formation of carbon nanostructures containing single-crystalline cobalt carbides by ion irradiation method
  98. In-situ TEM observation of internal metal inside metal filled carbon fiber
  99. Morphology and Size of Ion Induced Carbon Nanofibers: Effect of Ion Incidence Angle, Sputtering Rate, and Temperature
  100. Azidation of polyesters having pendent functionalities by using NaN3 or DPPA–DBU and photo-crosslinking of the azidopolyesters
  101. Direct fabrication of aligned metal composite carbon nanofibers on copper substrate at room temperature and their field emission property
  102. Highly transparent and flexible field emission devices based on single-walled carbon nanotube films
  103. Simple methods for tuning the pore diameter of mesoporous carbon
  104. Influence of new fullerene derivatives with fluorocarbon substituent on performance of polymer solar cells
  105. Poly[(3-hexylthiophene)-block-(3-semifluoroalkylthiophene)] for Polymer Solar Cells
  106. Fabrication and Morphological Control of Ion-Induced Zinc Nanostructures
  107. Growth and structure analysis of Tungsten oxide nanorods using Environmental TEM
  108. Morphology control of rapid grown vertically aligned carbon nanotube forest for fiber spinning
  109. Structural change of ion-induced carbon nanofibers by electron current flow
  110. Template-free electrochemical nanofabrication of polyaniline nanobrush and hybrid polyaniline with carbon nanohorns for supercapacitors
  111. Carbon-Supported Growth of Cross-Linked Platinum Nanowires by Surfactant Templating and Their Elecrochemical Characterization
  112. Electron spin resonance (ESR) analysis of Cu-doped ZnO and AlN films
  113. Size Control of Carbon Nanofiber Probes Fabricated by Ion Irradiation
  114. Formation and growth mechanisms of ion-induced iron–carbon nanocomposites at room temperature
  115. PREPARATION AND CHARACTERISTICS OF FUNCTIONALIZED MULTIWALLED CARBON NANOTUBES IN POLYIMIDE MIXED MATRIX MEMBRANE
  116. Neurosurgical robotic system for brain tumor removal
  117. Crystallinity-controlled iron-carbon composite nanofibers—Synthesis and characteristic properties
  118. Development of a real-time tactile sensing system for brain tumor diagnosis
  119. Improved open circuit voltage of the photovoltaic device using ferrocene as a donor material
  120. Transparent and Flexible Field Electron Emitters Based on the Conical Nanocarbon Structures
  121. Direct growth of carbon nanofibers on metal mesh substrates by ion irradiation method
  122. Key role of the pore volume of zeolite for selective production of propylene from olefins
  123. Direct growth of horizontally aligned carbon nanotubes between electrodes and its application to field-effect transistors
  124. Fabrication of ion-induced carbon-cobalt nanocomposite fibers: Effect of cobalt supply rate
  125. Fabrication of well ordered Zn nanorod arrays by ion irradiation method at room temperature and effect on crystal orientations
  126. Low-temperature fabrication and characterization of ion-induced Ge nanostructures
  127. Fabrication of well ordered Zn nanorod arrays by ion irradiation method at room temperature and effect on crystal orientations
  128. Effect of liquid nitrogen treatment on the structural, electrical and optical properties of indium tin oxide coated glass substrate
  129. Ferromagnetism in Cu-doped AlN films
  130. Effect of substrate temperature on the room-temperature ferromagnetism of Cu-doped ZnO films
  131. Direct growth of carbon nanofibers on metal mesh substrates by ion irradiation method
  132. Growth and Nanoscale Magnetic Properties of Ferromagnetic Nanowire Encapsulated Inside Carbon Nanotubes
  133. Room-temperature ferromagnetism of Cu-doped ZnO films deposited by helicon magnetron sputtering
  134. Synthesis and spectroscopic investigation of trifluoroethoxy-coated phthalocyanine linked with fullerene
  135. New diarylmethanofullerene derivatives and their properties for organic thin-film solar cells
  136. Synthesis and characterization of carbon nanotube grown on flexible and conducting carbon fiber sheet for field emitter
  137. Enhanced photovoltaic device performance upon modification of indium tin oxide coated glass by liquid nitrogen treatment
  138. Application of ion-induced carbon nanocomposite fibers to magnetic force microscope probes
  139. Low-Temperature Fabrication of Ion-Induced Ge Nanostructures: Effect of Simultaneous Al Supply
  140. Morphological Control of Ion-Induced Carbon Nanofibers and Their Field Emission Properties
  141. Room-temperature synthesis and characterisation of ion-induced iron-carbon nanocomposite fibres
  142. MOCVD growth of GaN on porous silicon substrates
  143. ZnO Nanowire and $\hbox{WS}_{2}$ Nanotube Electronics
  144. Preparation of Platinum Nanoparticles in Heterogeneous Solid-Liquid System by Ultrasound and Microwave Irradiation
  145. Carbon nanotubes on carbon fabrics for flexible field emitter arrays
  146. Microstructure and local magnetic induction of segmented and alloyed Pd/Co nanocomposites encapsulated inside vertically aligned multiwalled carbon nanotubes
  147. Formation and characterization of polymer/fullerene bulk heterojunction solar cells
  148. Room-temperature growth of ion-induced carbon nanofibers: Effects of ion species
  149. Room-temperature synthesis and characterization of cobalt-doped carbon nanofibers
  150. Morphological and structural characterization of metal-doped carbon nanofibers synthesized at room temperature
  151. Bulk heterojunction solar cells based on two kinds of organic polymers and fullerene derivative
  152. The Inner Shell Influence on the Electronic Structure of Double-Walled Carbon Nanotubes
  153. Self-assembled monolayer electrode of a diiron complex with a phenoxo-based dinucleating ligand: observation of molecular oxygenadsorption/desorption in aqueous media
  154. Growth and magnetic properties of ferromagnetic Co nanorods filled inside carbon nanotubes towards nanoscale spintronics
  155. Room-temperature growth and characterization of iron-carbon nanocomposite fibers
  156. Optical properties of conjugated poly(3-hexylthiophene)/[6,6]-phenylC61-butyric acid methyl ester composites
  157. Ultrafast carrier dynamics on conjugated poly(3-hexylthiophene)/[6,6]-phenylC61-butyric acid methyl ester composites
  158. Facile fabrication and structural studies of filtered Ge nanowires from aged Al–Ge alloy
  159. Synthesis, morphology and random laser action of ZnO nanostructures
  160. Encapsluation of Co and Pd multi-metal nanowires inside multiwalled carbon nanotubes by microwave plasma chemical vapor deposition
  161. Encapsulation of segmented Pd–Co nanocomposites into vertically aligned carbon nanotubes by plasma-hydrogen-induced demixing
  162. Synthesis, microstructure and photoluminescence of well-aligned ZnO nanorods on Si substrate
  163. Microstructure Analyses of Metal-Filled Carbon Nanotubes Synthesized by Microwave Plasma-Enhanced Chemical Vapor Deposition
  164. Demixing of Solid-Soluted Co-Pd Binary Alloy Induced by Microwave Plasma Hydrogen Irradiation Technique
  165. Low resistivity p-ZnO films fabricated by sol-gel spin coating
  166. Cobalt nanorods fully encapsulated in carbon nanotube and magnetization measurements by off-axis electron holography
  167. Characterization of amorphous carbon nitride by bottom-gated thin-film structure
  168. Characterization of transport properties of multiwalled carbon nanotube networks by microwave plasma chemical vapor deposition
  169. Optical Properties of Indium-Doped ZnO Films
  170. Investigation of Pcbm Concentration on Photovoltaic Characteristics of Polymer Solar Cells with Blends of P3Ht and Pcbm
  171. STRUCTURAL AND OPTICAL CHARACTERIZATION OF ZnO SINGLE CRYSTALLINE NANOBAMBOOS
  172. Effect of rf power on the photovoltaic properties of boron-doped amorphous carbon/n-type silicon junction fabricated by plasma enhanced chemical vapor deposition
  173. Formation of wedge-shaped carbon film by chemical vapor deposition method and observation using transmission electron microscopy
  174. Influence of Structure and C60Composition on Properties of Blends and Bilayers of Organic Donor-Acceptor Polymer/C60Photovoltaic Devices
  175. Efficient nitrogen incorporation into amorphous carbon films by double beam method
  176. Synthesis and characterization of metal-filled carbon nanotubes by microwave plasma chemical vapor deposition
  177. Facile fabrication method for p∕n-type and ambipolar transport polyphenylenevinylene-based thin-film field-effect transistors by blending C60 fullerene
  178. Development of new materials for solar cells in Nagoya Institute of Technology
  179. Structural, optical and mechanical properties of nanostructure diamond synthesized by chemical vapor deposition
  180. Corn-shape carbon nanofibers with dense graphite synthesized by microwave plasma-enhanced chemical vapor deposition
  181. Microstructure of metal-filled carbon nanotubes
  182. Modification of the physical properties of chemical vapor-deposited nanostructure diamond by argon-hydrogen plasma surface treatment
  183. Reaction of indium ate complexes with allylic compounds. Controlling SN2/SN2′ selectivity by solvents
  184. Synthesis of corn-shape carbon nanofibers on Si and Mo substrates by bias-enhanced microwave plasma chemical vapor deposition
  185. A photovoltaic cell from p-type boron-doped amorphous carbon film
  186. An approach for utilization of organic polymer as a sensitizer in solid-state cells
  187. Photovoltaic Properties of Boron-Incorporated Amorphous Carbon on n-Si Heterojunction Grown by Radio Frequency Plasma-Enhanced Chemical Vapor Deposition Using Trimethylboron
  188. Photovoltaic characteristics of boron-doped hydrogenated amorphous carbon on n-Si substrate prepared by r.f. plasma-enhanced CVD using trimethylboron
  189. Preparation of carbon micro-coils involving the decomposition of hydrocarbons using PACT (plasma and catalyst technology) reactor
  190. Growth of GaAs epitaxial layers on Si substrate with porous Si intermediate layer by chemical beam epitaxy
  191. OPTICAL PROPERTIES OF TRIMETHYLBORON AND NITROGEN CODOPED AMORPHOUS CARBON FILMS
  192. Deposition of amorphous CNx by d.c. and rf plasma sputtering using a rf radical nitrogen beam source
  193. The formation of a (111) texture of the diamond film on Pt/TiO2/SiOx/Si substrate by microwave plasma chemical vapor deposition
  194. Role of cyclic process in the initial stage of diamond deposition during bias enhanced nucleation
  195. Origin of yellow luminescence in n-GaN induced by high-energy 7MeV electron irradiation
  196. Determination of optical properties of nitrogen-doped hydrogenated amorphous carbon films by spectroscopic ellipsometry
  197. Spectroscopic properties of nitrogen doped hydrogenated amorphous carbon films grown by radio frequency plasma-enhanced chemical vapor deposition
  198. Growth and characterization of GaAs epitaxial layers on Si/porous Si/Si substrate by chemical beam epitaxy
  199. Optical and structural properties of nitrogen doped amorphous carbon films grown by rf plasma-enhanced CVD
  200. Low density of defect states in hydrogenated amorphous carbon thin films grown by plasma-enhanced chemical vapor deposition
  201. Low-temperature growth of GaAs polycrystalline films on glass substrates for space solar cell application
  202. Effect of Radio Frequency Power on the Properties of Hydrogenated Amorphous Carbon Films Grown by Radio Frequency Plasma-Enhanced Chemical Vapor Deposition
  203. Analysis of hole transport in cubic phase of p-type GaN by relaxation time approximation
  204. Theoretical Studies on Hole Transport and the Effective Hall Factor in Cubic Phase ofp-Type GaN
  205. Thermal Stress Relaxation in GaAs Layer on New Thin Si Layer over Porous Si Substrate Grown by Metalorganic Chemical Vapor Deposition
  206. MOCVD-grown SQWs on Si with AlGaAs/AlGaP intermediate layers and/or thermal cycle annealing: application to room-temperature CW lasers
  207. Room-Temperature CW Operation of AlGaAs/GaAs SQW Lasers on Si Substrates by MOCVD Using AlGaAs/AlGaP Intermediate Layers
  208. Microstructure analyses of metal-filled carbon nanotubes synthesized by microwave plasma-enhanced chemical vapour deposition