Contact

All Stories

  1. Effect of gradual thermoforming pressure on the mechanical properties of jute/polypropylene commingled composites

    Article • Journal of Composite Materials, January 2024, SAGE Publications

    Dr Yasir Nawab

  2. An eco-friendly hydroentangled cotton non-woven membrane with alginate hydrogel for water filtration

    Article • International Journal of Biological Macromolecules, January 2024, Elsevier

    Dr Yasir Nawab

  3. Impact of weave architecture on the mechanical performance of carbon-aramid/PVB hybrid composites

    Article • Journal of Engineered Fibers and Fabrics, January 2024, SAGE Publications

    Dr Yasir Nawab

  4. Delamination Characteristics of Aluminum-Composite Bonds: Impact of Reinforcements and Matrices

    Article • International Journal of Polymer Science, December 2023, Hindawi Publishing Corporation

    Dr Yasir Nawab

  5. Scaling thermal and mechanical characteristics of woven honeycombs: A novel endeavor of simultaneous ridges and picking sequence variation

    Article • International Journal of Thermal Sciences, December 2023, Elsevier

    Dr Yasir Nawab

  6. Bio-based thermal insulating panels for clothing using domestic parakeet feathers as filling: a comparative study

    Article • Biomass Conversion and Biorefinery, November 2023, Springer Science + Business Media

    Dr Yasir Nawab

  7. Effect of fillers and weave architecture hybridization on the impact performance of 3D woven hybrid green composites

    Article • Polymer Composites, November 2023, Wiley

    Dr Yasir Nawab

  8. Study of fibre to fibre and ply to ply comingling technique for fabrication of natural fibre reinforced thermoplastic composites

    Article • Journal of the Textile Institute, November 2023, Taylor & Francis

    Dr Yasir Nawab

  9. Optimization of percolation limit of carbon black for electromagnetic interference shielding

    Article • Journal of Magnetism and Magnetic Materials, November 2023, Elsevier

    Dr Yasir Nawab

  10. Optimization of the novel jute retting process to enhance the fiber quality for textile applications

    Article • Heliyon, November 2023, Elsevier

    Dr Yasir Nawab

  11. Circularity in Materials: A Review on Polymer Composites Made from Agriculture and Textile Waste

    Article • International Journal of Polymer Science, September 2023, Hindawi Publishing Corporation

    Dr Yasir Nawab

  12. Mechanical Performance of Glass/Epoxy Composites Loaded with Silane-Treated Aluminum Hydroxide Fillers

    Article • Polymers, August 2023, MDPI AG

    Dr Yasir Nawab

  13. Recent progress in thermal and acoustic properties of natural fiber reinforced polymer composites: Preparation, characterization, and data analysis

    Article • Polymer Composites, August 2023, Wiley

    Dr Yasir Nawab

  14. A Fibrous Nonwoven Hydrogel Composite for Shoe Insole with Enhanced Mechanical and Comfort Properties

    Article • Journal of Polymers and the Environment, July 2023, Springer Science + Business Media

    Dr Yasir Nawab

  15. Influence of tetrahedral architectures on fluid transmission and heat retention behaviors of auxetic weaves

    Article • Thermal Science and Engineering Progress, July 2023, Elsevier

    Dr Yasir Nawab

  16. Sunlight-Driven Photocatalytic Active Fabrics through Immobilization of Functionalized Doped Titania Nanoparticles

    Article • Polymers, June 2023, MDPI AG

    Dr Yasir Nawab

  17. Recent advances in electromagnetic interference (EMI) shielding textiles: A comprehensive review

    Article • Synthetic Metals, April 2023, Elsevier

    Dr Yasir Nawab

  18. Recent Developments in Materials and Manufacturing Techniques Used for Sports Textiles

    Article • International Journal of Polymer Science, February 2023, Hindawi Publishing Corporation

    Dr Yasir Nawab

  19. Effect of Surface Treatment on Stiffness and Damping Behavior of Metal-Metal and Composite-Metal Adhesive Joints

    Article • Polymers, January 2023, MDPI AG

    Dr Yasir Nawab

  20. A Novel Composite of Hemp Fiber and Alginate Hydrogel for Wound Dressings

    Article • Journal of Polymers and the Environment, January 2023, Springer Science + Business Media

    Dr Yasir Nawab

  21. Effect of Cellulosic Material and Weave Design on Comfort Performance of Woven Fabrics

    Article • Journal of Natural Fibers, January 2023, Taylor & Francis

    Dr Yasir Nawab

  22. Numerical modeling of suspension impregnation through a fibrous medium: Application to the CRTM process

    Article • Journal of Reinforced Plastics and Composites, November 2022, SAGE Publications

    Dr Yasir Nawab

  23. Effect of shear thickening fluid on mechanical properties of para-aramid fabrics

    Article • Journal of the Textile Institute, November 2022, Taylor & Francis

    Dr Yasir Nawab

  24. Effect of Geometric Arrangement on Mechanical Properties of 2D Woven Auxetic Fabrics

    Article • Textiles, November 2022, MDPI AG

    Dr Yasir Nawab

  25. Investigating the Thermo-Physiological Comfort Properties of Weft-Knitted Smart Structures Having a Negative Poisson’s Ratio

    Article • Advances in Materials Science and Engineering, November 2022, Hindawi Publishing Corporation

    Dr Yasir Nawab

  26. Mode I Fatigue of Fibre Reinforced Polymeric Composites: A Review

    Article • Polymers, October 2022, MDPI AG

    Dr Yasir Nawab

  27. A Review of the Fabrication Methods, Testing, and Performance of Face Masks

    Article • International Journal of Polymer Science, October 2022, Hindawi Publishing Corporation

    Dr Yasir Nawab

  28. The Role and Applications of Aerogels in Textiles

    Article • Advances in Materials Science and Engineering, September 2022, Hindawi Publishing Corporation

    Dr Yasir Nawab

  29. Optimization of Flame Retardancy & Mechanical Performance of Jute-glass/Epoxy Hybrid Composites

    Article • Fibers and Polymers, September 2022, Springer Science + Business Media

    Dr Yasir Nawab

  30. Three-dimensional printable metamaterial intramedullary nails with tunable strain for the treatment of long bone fractures

    Article • Materials & Design, September 2022, Elsevier

    Dr Yasir Nawab

  31. Damage‐Tolerant Woven Glass Fiber Composites Developed Using Polyvinyl Butyral (PVB) Unsaturated Polyester (UP) Blends

    Article • Advances in Materials Science and Engineering, August 2022, Hindawi Publishing Corporation

    Dr Yasir Nawab

  32. Effect of surface treatment on the performance of composite‐composite and composite‐metal adhesive joints

    Article • Polymer Composites, July 2022, Wiley

    Dr Yasir Nawab

  33. Effect of various dielectric and magnetic nanofillers on microwave absorption properties of carbon fiber reinforced composites structures

    Article • Ceramics International, July 2022, Elsevier

    Dr Yasir Nawab

  34. Development and characterization of impact resistant fabric with better comfort for motorbike riders

    Article • Journal of the Textile Institute, June 2022, Taylor & Francis

    Dr Yasir Nawab

  35. A review of joining techniques for thermoplastic composite materials

    Article • Journal of Thermoplastic Composite Materials, June 2022, SAGE Publications

    Dr Yasir Nawab

  36. Effects of Braid Angle and Material Modulus on the Negative Poisson’s Ratio of Braided Auxetic Yarns

    Article • Crystals, May 2022, MDPI AG

    Dr John George Hardy, Dr Yasir Nawab

  37. Effect of Different Dielectric and Magnetic Nanoparticles on the Electrical, Mechanical, and Thermal Properties of Unidirectional Carbon Fiber-Reinforced Composites

    Article • International Journal of Polymer Science, May 2022, Hindawi Publishing Corporation

    Dr Yasir Nawab

  38. Effect of matrix and hybrid reinforcement on fibre metal laminates under low–velocity impact loading

    Article • Composite Structures, May 2022, Elsevier

    Dr Yasir Nawab

  39. Effect of Hybridization Approach on Mechanical Performance of Jute-hemp/epoxy Hybrid Composite Laminates

    Article • Journal of Natural Fibers, April 2022, Taylor & Francis

    Dr Yasir Nawab

  40. Impact Performance of Three-dimensional Woven Composites with Novel Binding Yarn Patterns

    Article • Journal of Natural Fibers, April 2022, Taylor & Francis

    Dr Yasir Nawab

  41. Effect of poly ether ether ketone particles on v‐notched shear and drop weight impact behavior of carbon/epoxy composite

    Article • Polymer Composites, March 2022, Wiley

    Dr Yasir Nawab

  42. Mechanical performance of flame retardant and antibacterial glass-carbon/epoxy hybrid composites for furniture applications

    Article • Journal of Industrial Textiles, March 2022, SAGE Publications

    Dr Yasir Nawab

  43. Effect of PEEK Particles on Physiomechanical Behavior of Carbon/Epoxy Composite

    Article • International Journal of Polymer Science, February 2022, Hindawi Publishing Corporation

    Dr Yasir Nawab

  44. Effect of picking sequence on thermo-physiological comfort of bilayer woven fabrics

    Article • Research Journal of Textile and Apparel, February 2022, Emerald

    Dr Yasir Nawab

  45. Thermal properties of woven fabric as a function of its structural parameters: experimentation and modeling

    Article • Research Journal of Textile and Apparel, February 2022, Emerald

    Dr Yasir Nawab

  46. Natural Fiber-Reinforced Polylactic Acid, Polylactic Acid Blends and Their Composites for Advanced Applications

    Article • Polymers, January 2022, MDPI AG

    Dr. R.A. Ilyas, Dr Yasir Nawab

  47. Lignocellulosic Fibers

    Article • January 2022, Springer Science + Business Media

    Dr Yasir Nawab

  48. Lignocellulosic Fiber Structure

    Article • January 2022, Springer Science + Business Media

    Dr Yasir Nawab

  49. Green Composite Solutions

    Article • January 2022, Springer Science + Business Media

    Dr Yasir Nawab

  50. Bast and Grass Fibers

    Article • January 2022, Springer Science + Business Media

    Dr Yasir Nawab

  51. Fruit, Seed and Leaf Fibers

    Article • January 2022, Springer Science + Business Media

    Dr Yasir Nawab

  52. Performance of Green Composites

    Article • January 2022, Springer Science + Business Media

    Dr Yasir Nawab

  53. Wood and Agriculture Waste Fibers

    Article • January 2022, Springer Science + Business Media

    Dr Yasir Nawab

  54. Synthesis and Characterization of Nonwoven Cotton-Reinforced Cellulose Hydrogel for Wound Dressings

    Article • Polymers, November 2021, MDPI AG

    Dr Yasir Nawab

  55. Development of functional (flame‐retardant and anti‐bacterial) and hybrid (carbon‐glass/epoxy) composites with improved low velocity impact response

    Article • Polymer Composites, November 2021, Wiley

    Dr Yasir Nawab

  56. Effect of dielectric and magnetic nanofillers on electromagnetic interference shielding effectiveness of carbon/epoxy composites

    Article • Journal of Composite Materials, November 2021, SAGE Publications

    Dr Yasir Nawab

  57. Recent trends in water purification using electrospun nanofibrous membranes

    Article • International Journal of Environmental Science and Technology, August 2021, Springer Science + Business Media

    Dr Yasir Nawab

  58. Mechanical performance of 3D woven jute/green epoxy composites with novel weaving patterns

    Article • Journal of Industrial Textiles, August 2021, SAGE Publications

    Dr Yasir Nawab

  59. Effect of the stuffer yarns on the mechanical performance of novel 3D woven green composites

    Article • Composite Structures, August 2021, Elsevier

    Dr Yasir Nawab

  60. An economical and environmentally benign approach to extract banana fibres from agricultural waste for fibre reinforced composites

    Article • Journal of the Textile Institute, July 2021, Taylor & Francis

    Dr Yasir Nawab

  61. Effect of Micro-fillers on the Performance of Thermoplastic Para Aramid Composites for Impact Applications

    Article • Fibers and Polymers, June 2021, Springer Science + Business Media

    Dr Yasir Nawab

  62. Investigation of impact properties of para-aramid composites made with a thermoplastic-thermoset blend

    Article • Journal of Thermoplastic Composite Materials, June 2021, SAGE Publications

    Dr Yasir Nawab

  63. Double face fabrics: a tailorable solution for puncture resistant applications

    Article • Journal of the Textile Institute, April 2021, Taylor & Francis

    Dr Yasir Nawab

  64. Molecular Investigation and Phylogenetic Analysis of Anaplasmosis in Dogs

    Article • Journal of Parasitology, April 2021, American Society of Parasitologists

    Dr Yasir Nawab

  65. M-Type Barium Hexaferrite-Based Nanocomposites for EMI Shielding Application: a Review

    Article • Journal of Superconductivity and Novel Magnetism, April 2021, Springer Science + Business Media

    Dr Yasir Nawab

  66. Thermal expansion coefficient: A macro-scale indicator of particle filtration in composites fabricated by resin infusion

    Article • Polymer Testing, April 2021, Elsevier

    Dr Yasir Nawab

  67. Enhanced interlaminar shear and impact performance of woven carbon/epoxy composites interleaved with needle punched high performance polyethylene fiber nonwoven

    Article • Journal of Applied Polymer Science, March 2021, Wiley

    MUHAMMAD ADNAN, Dr Yasir Nawab

  68. Effect of Fabric Structure on the Performance of 3D Woven Pressure Sensor

    Article • Fibers and Polymers, March 2021, Springer Science + Business Media

    Dr Yasir Nawab

  69. Environmental benign natural fibre reinforced thermoplastic composites: A review

    Article • Composites Part C Open Access, March 2021, Elsevier

    Dr Yasir Nawab

  70. Study of mechanical, electrical and EMI shielding properties of polymer-based nanocomposites incorporating polyaniline coated graphene nanoparticles

    Article • Nano Express, March 2021, Institute of Physics Publishing

    Dr Yasir Nawab

  71. Development and characterization of chemical and fire resistant jute/unsaturated polyester composites

    Article • Journal of the Textile Institute, February 2021, Taylor & Francis

    Dr Yasir Nawab

  72. Machine Learning Approach for Prediction of Crimp in Cotton Woven Fabrics

    Article • Tehnicki vjesnik - Technical Gazette, February 2021, Mechanical Engineering Faculty in Slavonski Brod

    Dr Yasir Nawab

  73. Thermo-physiological Comfort of Woven Fabrics Made from Different Cellulosic Yarns

    Article • Journal of Natural Fibers, January 2021, Taylor & Francis

    Dr Yasir Nawab

  74. Optimizing the Auxetic Geometry Parameters in Few Yarns Based Auxetic Woven Fabrics for Enhanced Mechanical Properties Using Grey Relational Analysis

    Article • Journal of Natural Fibers, January 2021, Taylor & Francis

    Dr Yasir Nawab

  75. Effect of surface treatments on metal–composite adhesive bonding for high-performance structures: an overview

    Article • Composite Interfaces, January 2021, Taylor & Francis

    Dr Yasir Nawab

  76. Effect of weave architecture and glass microspheres percentage on the low velocity impact response of hemp/green epoxy composites

    Article • Journal of Composite Materials, January 2021, SAGE Publications

    Dr Yasir Nawab

  77. Morphometry of leaf and shoot variables to assess aboveground biomass structure and carbon sequestration by different varieties of white mulberry (Morus alba L.)

    Article • Journal of Forestry Research, January 2021, Springer Science + Business Media

    Dr Yasir Nawab

  78. Preface

    Article • January 2021, Elsevier

    Dr Yasir Nawab

  79. Polymer composites

    Article • January 2021, Elsevier

    Dr Yasir Nawab

  80. Personal and structural protection

    Article • January 2021, Elsevier

    Dr Yasir Nawab

  81. Use of auxetic material for impact/ballistic applications

    Article • January 2021, Elsevier

    Dr Yasir Nawab

  82. Green Fiber-Reinforced Concrete Composites

    Article • January 2021, Springer Science + Business Media

    Dr Yasir Nawab

  83. Natural fiber–reinforced composites for ballistic protection

    Article • January 2021, Elsevier

    Dr Yasir Nawab

  84. Cellulosic Fillers Extracted from Argyreia Speciose Waste: A Potential Reinforcement for Composites to Enhance Properties

    Article • Journal of Natural Fibers, December 2020, Taylor & Francis

    Dr Yasir Nawab

  85. Properties and characterization of novel 3D jute reinforced natural fibre aluminium laminates

    Article • Journal of Composite Materials, December 2020, SAGE Publications

    Dr Yasir Nawab

  86. Effect of yarn singeing and commingling on the mechanical properties of jute/polypropylene composites

    Article • Polymer Composites, November 2020, Wiley

    Dr Yasir Nawab

  87. Effect of Barium Hexaferrites and Thermally Reduced Graphene Oxide on EMI Shielding Properties in Polymer Composites

    Article • Journal of Superconductivity and Novel Magnetism, September 2020, Springer Science + Business Media

    Dr Yasir Nawab

  88. Numerical Analysis of Binding Yarn Float Length for 3D Auxetic Structures

    Article • physica status solidi (b), September 2020, Wiley

    Dr Yasir Nawab

  89. Development of 3D auxetic structures using para-aramid and ultra-high molecular weight polyethylene yarns

    Article • Journal of the Textile Institute, September 2020, Taylor & Francis

    Dr Yasir Nawab

  90. Extraction and characterization of novel fibers from Vernonia elaeagnifolia as a potential textile fiber

    Article • Industrial Crops and Products, September 2020, Elsevier

    Mr Khubab Shaker, Dr Yasir Nawab

  91. Mechanical Properties of Continuous Natural Fibres (Jute, Hemp, Flax) Reinforced Polypropylene Composites Modified with Hollow Glass Microspheres

    Article • Fibers and Polymers, September 2020, Springer Science + Business Media

    Dr Yasir Nawab

  92. Influence of inlay yarn type and stacking sequence on mechanical performance of knitted uni-directional thermoplastic composite prepregs

    Article • Journal of Industrial Textiles, August 2020, SAGE Publications

    Dr Yasir Nawab

  93. Effect of glass microspheres and fabric weave structure on mechanical performance of hemp/green epoxy composites

    Article • Polymer Composites, August 2020, Wiley

    Mr Khubab Shaker, Dr Yasir Nawab

  94. Effect of fabric architecture on the shear and impact properties of natural fibre reinforced composites

    Article • Composites Part B Engineering, August 2020, Elsevier

    Dr Yasir Nawab

  95. Mechanical Properties of Hollow Glass Microspheres Filled Jute Woven Comingled Composites

    Article • Key Engineering Materials, August 2020, Trans Tech Publications

    Dr Yasir Nawab

  96. Effect on the EMI Shielding Properties of Cobalt Ferrites and Coal-Fly-Ash Based Polymer Nanocomposites

    Article • Journal of Superconductivity and Novel Magnetism, July 2020, Springer Science + Business Media

    Dr Yasir Nawab

  97. Development of helical auxetic yarn with negative Poisson’s ratio by combinations of different materials and wrapping angle

    Article • Journal of Industrial Textiles, July 2020, SAGE Publications

    Dr Yasir Nawab

  98. Development of Anti-Bacterial and Anti-Viral Nonwoven Surgical Masks for Medical Applications

    Article • Tekstilec, June 2020, University of Ljubljana

    Dr Yasir Nawab

  99. Comparison of Mechanical Behavior of Biaxial, Unidirectional and Standard Woven Fabric Reinforced Composites

    Article • Fibers and Polymers, June 2020, Springer Science + Business Media

    Mr Khubab Shaker, Dr Yasir Nawab

  100. Effect of weaving patterns on damage resistance of 3D woven jointless T and H shaped reinforcements

    Article • Mechanics of Advanced Materials and Structures, April 2020, Taylor & Francis

    Mr Khubab Shaker, Dr Yasir Nawab

  101. The Potential Effect of Dietary Tannins on Enteric Methane Emission and Ruminant Production, as an Alternative to Antibiotic Feed Additives – A Review

    Article • April 2020, De Gruyter

    Dr Yasir Nawab

  102. Effect of Nickel-spinal-Ferrites on EMI shielding properties of polystyrene/polyaniline blend

    Article • SN Applied Sciences, March 2020, Springer Science + Business Media

    Dr Yasir Nawab

  103. Impact of waste fibers on the mechanical performance of concrete composites

    Article • Journal of the Textile Institute, March 2020, Taylor & Francis

    Mr Khubab Shaker, Dr Yasir Nawab

  104. Balantidium coli in domestic animals: An emerging protozoan pathogen of zoonotic significance

    Article • Acta Tropica, March 2020, Elsevier

    Dr Yasir Nawab

  105. Effect of the spatial variation of permeability on air bubble creation and compression

    Article • Journal of Reinforced Plastics and Composites, January 2020, SAGE Publications

    Dr Yasir Nawab

  106. Fibers for Technical Textiles

    Article • January 2020, Springer Science + Business Media

    Dr Yasir Nawab

  107. Green Fiber-Reinforced Concrete Composites

    Article • January 2020, Springer Science + Business Media

    Dr Yasir Nawab

  108. Introduction

    Article • January 2020, Springer Science + Business Media

    Dr Yasir Nawab

  109. Fabrication and Characterization of Lightweight Engineered Polypropylene Composites Using Silica Particles and Flax Woven Comingled Structure

    Article • January 2020, Springer Science + Business Media

    Dr Yasir Nawab

  110. Fibers for Protective Textiles

    Article • January 2020, Springer Science + Business Media

    Dr Yasir Nawab

  111. Optimization of mechanical/thermal properties of glass/flax/waste cotton hybrid composite

    Article • Journal of Industrial Textiles, December 2019, SAGE Publications

    Dr Yasir Nawab

  112. Fabrication of reduced graphene oxide (RGO) and nanocomposite with thermoplastic polyurethane (TPU) for EMI shielding application

    Article • Journal of Materials Science Materials in Electronics, November 2019, Springer Science + Business Media

    Dr Yasir Nawab

  113. Effect of comingling techniques on mechanical properties of natural fibre reinforced cross-ply thermoplastic composites

    Article • Composites Part B Engineering, November 2019, Elsevier

    Dr Yasir Nawab

  114. Techno‐mechanical properties of cocoon, raw silk and filament of two mulberry silkworm (Bombyx mori L.) strains

    Article • Materialwissenschaft und Werkstofftechnik, October 2019, Wiley

    Dr Yasir Nawab

  115. EMI Shielding Characteristics of Electrically Conductive Polymer Blends of PS/PANI in Microwave and IR Region

    Article • Journal of Electronic Materials, September 2019, Springer Science + Business Media

    Dr Yasir Nawab

  116. Experimental and numerical investigation of reduction in shape distortion for angled composite parts

    Article • International Journal of Material Forming, September 2019, Springer Science + Business Media

    Mr Khubab Shaker, Dr Yasir Nawab

  117. Compression and recovery behavior of three-dimensional woven spacer composites

    Article • Journal of Industrial Textiles, September 2019, SAGE Publications

    Dr Yasir Nawab

  118. Influence of silica fillers on failure modes of glass/vinyl ester composites under different mechanical loadings

    Article • Engineering Fracture Mechanics, September 2019, Elsevier

    Mr Khubab Shaker, Dr Yasir Nawab

  119. Effect of micro-crystalline cellulose particles on mechanical properties of alkaline treated jute fabric reinforced green epoxy composite

    Article • Cellulose, August 2019, Springer Science + Business Media

    Mr Khubab Shaker, Dr Yasir Nawab

  120. Impact of Capacity Building and Managerial Support on Employees’ Performance: The Moderating Role of Employees’ Retention

    Article • SAGE Open, July 2019, SAGE Publications

    Dr Muhammad Hashim, dr sajjad Baig, Dr Yasir Nawab

  121. Mode I fracture toughness of fiber-reinforced polymer composites: A review

    Article • Journal of Industrial Textiles, June 2019, SAGE Publications

    Dr Yasir Nawab

  122. Reduction in process-induced shape distortion of C-shaped composite parts using micro silica particles

    Article • The International Journal of Advanced Manufacturing Technology, June 2019, Springer Science + Business Media

    Mr Khubab Shaker, Dr Yasir Nawab

  123. Study of comfort performance of novel car seat design for long drive

    Article • Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, June 2019, SAGE Publications

    Dr Yasir Nawab

  124. Effect of Pile Height on the Mechanical Properties of 3D Woven Spacer Composites

    Article • Fibers and Polymers, June 2019, Springer Science + Business Media

    Dr Yasir Nawab

  125. Development and characterization of jute/polypropylene composite by using comingled nonwoven structures

    Article • Journal of the Textile Institute, May 2019, Taylor & Francis

    Dr Yasir Nawab, Dr Zulfiqar - Ali, Sheraz Ahmad

  126. Performance of novel auxetic woven fabrics produced using Helical Auxetic Yarn

    Article • Materials Research Express, April 2019, Institute of Physics Publishing

    Mr Khubab Shaker, Dr Yasir Nawab

  127. Effect of interlocking pattern on short beam strength of 3D woven composites

    Article • Journal of Composite Materials, April 2019, SAGE Publications

    Dr Yasir Nawab, Dr. Syed Talha Ali Hamdani

  128. The Potential Role of Probiotics (nutraceuticals) in Gut Health of Domestic Animals; an Alternative to Antibiotic Growth Promoters

    Article • Journal of the Hellenic Veterinary Medical Society, February 2019, National Documentation Centre

    Dr Yasir Nawab

  129. Effect of fabric structural design on the thermal properties of woven fabrics

    Article • Thermal Science, January 2019, National Library of Serbia

    Mr Khubab Shaker, Dr Yasir Nawab

  130. Experimental analysis of ILSS of glass fibre reinforced thermoplastic and thermoset textile composites enhanced with multiwalled carbon nanotubes

    Article • Journal of Mechanical Science and Technology, January 2019, Springer Science + Business Media

    Dr Yasir Nawab

  131. Heat stress in poultry production: Mitigation strategies to overcome the future challenges facing the global poultry industry

    Article • Journal of Thermal Biology, December 2018, Elsevier

    Dr Yasir Nawab

  132. Tailoring the properties of leno woven fabrics by varying the structure

    Article • Mechanics of Advanced Materials and Structures, November 2018, Taylor & Francis

    Mr Khubab Shaker, Dr Yasir Nawab

  133. Development and Mechanical Characterization of Weave Design Based 2D Woven Auxetic Fabrics for Protective Textiles

    Article • Fibers and Polymers, November 2018, Springer Science + Business Media

    Dr Yasir Nawab

  134. Mechanical Response of Novel 3D Woven Flax Composites with Variation in Z Yarn Binding

    Article • Journal of Natural Fibers, October 2018, Taylor & Francis

    Dr. Mehmet KARAHAN, Dr Tanveer Hussain, Dr Yasir Nawab

  135. Effect of silica nanoparticles on mechanical properties of Kevlar/epoxy hybrid composites

    Article • Journal of the Textile Institute, October 2018, Taylor & Francis

    Dr Yasir Nawab, Dr. Mehmet KARAHAN, Dr Tanveer Hussain

  136. Development of composites, reinforced by novel 3D woven orthogonal fabrics with enhanced auxeticity

    Article • Journal of Industrial Textiles, August 2018, SAGE Publications

    Dr Yasir Nawab, Mr Khubab Shaker

  137. Development and characterization of three-dimensional woven fabric for ultra violet protection

    Article • International Journal of Clothing Science and Technology, July 2018, Emerald

    Mr Khubab Shaker, Dr Yasir Nawab

  138. Development & Characterization of Green Composites Using Novel 3D Woven Preforms

    Article • Applied Composite Materials, July 2018, Springer Science + Business Media

    Mr Khubab Shaker, Dr Yasir Nawab

  139. Effect of structural hybridization on ballistic performance of aramid fabrics

    Article • Journal of Thermoplastic Composite Materials, June 2018, SAGE Publications

    Dr Yasir Nawab

  140. Novel derivatives of 3D woven T-shaped composites with improved performance

    Article • Journal of the Textile Institute, May 2018, Taylor & Francis

    Dr Yasir Nawab

  141. Development and Comfort Characterization of 2D-Woven Auxetic Fabric for Wearable and Medical Textile Applications

    Article • Clothing and Textiles Research Journal, April 2018, SAGE Publications

    Dr Yasir Nawab

  142. Optimization of 3D woven preform for improved mechanical performance

    Article • Journal of Industrial Textiles, March 2018, SAGE Publications

    Dr Yasir Nawab, Mr Khubab Shaker

  143. Mechanical Behaviour of Hybrid Composites Developed from Textile Waste

    Article • Fibres and Textiles in Eastern Europe, February 2018, Index Copernicus

    Dr Yasir Nawab, Mr Khubab Shaker

  144. A study on the interdependence of fabric pore size and its mechanical and comfort properties

    Article • Journal of Natural Fibers, February 2018, Taylor & Francis

    Dr Yasir Nawab, Mr. Muhammad Umair, Mr Khubab Shaker

  145. Investigation of mechanical properties of auxetic woven polymer composite material

    Article • Materialwissenschaft und Werkstofftechnik, February 2018, Wiley

    Dr Yasir Nawab

  146. Study of influence of interlocking patterns on the mechanical performance of 3D multilayer woven composites

    Article • Journal of Reinforced Plastics and Composites, January 2018, SAGE Publications

    Dr Yasir Nawab

  147. Preparation of Conductive Polyethylene Terephthalate Yarns by Deposition of Silver & Copper Nanoparticles

    Article • Fibres and Textiles in Eastern Europe, October 2017, Index Copernicus

    Mr Khubab Shaker, Dr Yasir Nawab

  148. Effect of silica particle loading on shape distortion in glass/vinyl ester-laminated composite plates

    Article • Journal of the Textile Institute, August 2017, Taylor & Francis

    Mr Khubab Shaker, Dr Yasir Nawab

  149. Development and Characterization of Hybrid Green Composites from Textile Waste

    Article • June 2017, Springer Science + Business Media

    Dr Yasir Nawab

  150. Simulation of air bubble’s creation, compression, and transport phenomena in resin transfer moulding

    Article • Journal of Composite Materials, March 2017, SAGE Publications

    Dr Yasir Nawab

  151. Structural Textile Design

    Article • March 2017, Taylor & Francis

    Dr Yasir Nawab, Mr Khubab Shaker

  152. Conventional Woven Structures

    Article • March 2017, Taylor & Francis

    Dr Yasir Nawab

  153. Patterning in Warp Knitting

    Article • March 2017, Taylor & Francis

    Dr Yasir Nawab

  154. Simultaneous Optimization of Woven Fabric Properties Using Principal Component Analysis

    Article • Journal of Natural Fibers, February 2017, Taylor & Francis

    Dr Yasir Nawab, Mr Khubab Shaker

  155. Interdependence of moisture, mechanical properties, and hydrophobic treatment of jute fibre-reinforced composite materials

    Article • Journal of the Textile Institute, February 2017, Taylor & Francis

    Dr Yasir Nawab, Mr Khubab Shaker

  156. Optimizing the performance of woven protective gloves using grey relational analysis

    Article • Journal of the Textile Institute, January 2017, Taylor & Francis

    Dr Yasir Nawab, Mr Khubab Shaker

  157. Fabrication induced spring-back in thermosetting woven composite parts with variable thickness

    Article • Journal of Industrial Textiles, January 2017, SAGE Publications

    Dr Yasir Nawab

  158. Influence of Fabric Parameters on Thermal Comfort Performance of Double Layer Knitted Interlock Fabrics

    Article • Autex Research Journal, January 2017, De Gruyter

    Dr Yasir Nawab, Sheraz Ahmad

  159. Investigation of mechanical behavior of woven/knitted hybrid composites

    Article • Journal of the Textile Institute, November 2016, Taylor & Francis

    Dr Yasir Nawab, Mr Khubab Shaker

  160. Investigating the effect of material and weave design on comfort properties of bilayer-woven fabrics

    Article • Journal of the Textile Institute, October 2016, Taylor & Francis

    Dr Yasir Nawab, Mr Khubab Shaker

  161. The development of novel auxetic woven structure for impact applications

    Article • Journal of the Textile Institute, September 2016, Taylor & Francis

    Dr Yasir Nawab

  162. Study of dynamic compressive behaviour of aramid and ultrahigh molecular weight polyethylene composites using Split Hopkinson Pressure Bar

    Article • Journal of Composite Materials, July 2016, SAGE Publications

    Dr. Mehmet KARAHAN, Dr Yasir Nawab, Mr Khubab Shaker

  163. Characterisation and modelling of thermal expansion coefficient of woven carbon/epoxy composite and its application to the determination of spring-in

    Article • Journal of Composite Materials, July 2016, SAGE Publications

    Dr Yasir Nawab

  164. Fabric manufacturing

    Article • Physical Sciences Reviews, July 2016, De Gruyter

    Dr Yasir Nawab, Mr Khubab Shaker, Mr. Muhammad Umair

  165. Static and Dynamic Mechanical Properties of Cotton/Epoxy Green Composites

    Article • Fibres and Textiles in Eastern Europe, July 2016, Index Copernicus

    Dr Yasir Nawab, Mr Khubab Shaker

  166. Hydrophobic treatment of natural fibers and their composites—A review

    Article • Journal of Industrial Textiles, June 2016, SAGE Publications

    Dr Yasir Nawab, Mr Khubab Shaker

  167. Investigating the mechanical behavior of composites made from textile industry waste

    Article • Journal of the Textile Institute, June 2016, Taylor & Francis

    Dr Yasir Nawab, Mr Khubab Shaker

  168. Modeling and analysis of the creep behavior of jute/green epoxy composites incorporated with chemically treated pulverized nano/micro jute fibers

    Article • Industrial Crops and Products, June 2016, Elsevier

    Dr Yasir Nawab

  169. Multi-response optimization of mechanical and comfort properties of bi-stretch woven fabrics using grey relational analysis in Taguchi method

    Article • Journal of the Textile Institute, June 2016, Taylor & Francis

    Dr Yasir Nawab

  170. Comparison of compression properties of stretchable knitted fabrics and bi-stretch woven fabrics for compression garments

    Article • Journal of the Textile Institute, April 2016, Taylor & Francis

    Dr Yasir Nawab, Mr Khubab Shaker

  171. From the Characterization and Modeling of Cure-Dependent Properties of Composite Materials to the Simulation of Residual Stresses

    Article • March 2016, Wiley

    Dr Yasir Nawab

  172. Recycling of warp size materials and comparison of yarn mechanical properties sized with recycled materials and virgin materials

    Article • Journal of the Textile Institute, March 2016, Taylor & Francis

    Dr Yasir Nawab, Mr Khubab Shaker

  173. Textile Engineering

    Article • January 2016, De Gruyter

    Dr Yasir Nawab

  174. Modelling the Effect of Weave Structure and Fabric Thread Density on Mechanical and Comfort Properties of Woven Fabrics

    Article • Autex Research Journal, January 2016, De Gruyter

    Dr Yasir Nawab, Mr Khubab Shaker

  175. A Statistical Approach for Obtaining the Controlled Woven Fabric Width

    Article • Autex Research Journal, December 2015, De Gruyter

    Dr Yasir Nawab, Mr Khubab Shaker

  176. Impact of hydrophobic treatment of jute on moisture regain and mechanical properties of composite material

    Article • Journal of Reinforced Plastics and Composites, October 2015, SAGE Publications

    Dr Yasir Nawab, Mr Khubab Shaker

  177. Development and characterization of three-dimensional woven-shaped preforms and their associated composites

    Article • Journal of Reinforced Plastics and Composites, October 2015, SAGE Publications

    Dr Yasir Nawab, Mr Khubab Shaker

  178. Simulation of coupling filtration and flow in a dual scale fibrous media

    Article • Composites Part A Applied Science and Manufacturing, September 2015, Elsevier

    Dr Yasir Nawab

  179. Modeling the effect of weave structure and fabric thread density on the barrier effectiveness of woven surgical gowns

    Article • Journal of the Textile Institute, July 2015, Taylor & Francis

    Mr Khubab Shaker, Dr Yasir Nawab

  180. Effect of woven fabric structure on the air permeability and moisture management properties

    Article • Journal of the Textile Institute, July 2015, Taylor & Francis

    Dr Yasir Nawab, Mr Khubab Shaker

  181. Bioactive woven flax-based composites: Development and characterisation

    Article • Journal of Industrial Textiles, June 2015, SAGE Publications

    Mr Khubab Shaker, Dr Yasir Nawab

  182. Development Of 3D Woven Fabric Based Pressure Switch

    Article • Autex Research Journal, June 2015, De Gruyter

    Dr Yasir Nawab, Mr Khubab Shaker

  183. In situ characterization of in-plane chemical shrinkage of thermoset laminated composites using a simple setup

    Article • Journal of Reinforced Plastics and Composites, May 2015, SAGE Publications

    Dr Yasir Nawab

  184. In situ deposition of TiO2 nanoparticles on polyester fabric and study of its functional properties

    Article • Fibers and Polymers, May 2015, Springer Science + Business Media

    Dr Yasir Nawab, Dr Zulfiqar Ali Raza

  185. Modeling the effect of elastane linear density, fabric thread density, and weave float on the stretch, recovery, and compression properties of bi-stretch woven fabrics for compression garments

    Article • Journal of the Textile Institute, April 2015, Taylor & Francis

    Dr Tanveer Hussain, Dr Yasir Nawab

  186. Modeling the Residual Stress in Woven Thermoset Composites Parts for Aerospace Applications Using Finite Element Methods

    Article • Advanced Materials Research, April 2015, Trans Tech Publications

    Dr Yasir Nawab

  187. Development of seersucker knitted fabric for better comfort properties and aesthetic appearance

    Article • Fibers and Polymers, March 2015, Springer Science + Business Media

    Dr Yasir Nawab

  188. Numerical analysis of self-healing composite materials

    Article • January 2015, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Yasir Nawab, Mr Khubab Shaker

  189. Characterization and statistical modelling of thermal resistance of cotton/polyester blended double layer interlock knitted fabrics

    Article • Thermal Science, January 2015, National Library of Serbia

    Dr Yasir Nawab

  190. Prediction of warp and weft yarn crimp in cotton woven fabrics

    Article • Journal of the Textile Institute, November 2014, Taylor & Francis

    Dr Tanveer Hussain, Dr Yasir Nawab, Mr Khubab Shaker, Mr. Muhammad Umair

  191. Development of seersucker fabrics using single warp beam and modelling of their stretch-recovery behaviour

    Article • Journal of the Textile Institute, November 2014, Taylor & Francis

    Dr Yasir Nawab, Mr Khubab Shaker

  192. Shape Distortion of Carbon/Epoxy Composite Parts During Fabrication

    Article • Macromolecular Symposia, June 2014, Wiley

    Dr Yasir Nawab

  193. Effect of pressure and reinforcement type on the volume chemical shrinkage in thermoset resin and composite

    Article • Journal of Composite Materials, September 2013, SAGE Publications

    Dr Yasir Nawab

  194. Study of variation of thermal expansion coefficients in carbon/epoxy laminated composite plates

    Article • Composites Part B Engineering, July 2013, Elsevier

    Dr Yasir Nawab

  195. Chemical shrinkage characterization techniques for thermoset resins and associated composites

    Article • Journal of Materials Science, April 2013, Springer Science + Business Media

    Dr Yasir Nawab

  196. Study of changes in 3D-woven multilayer interlock fabric preforms while forming

    Article • Journal of the Textile Institute, December 2012, Taylor & Francis

    Dr Yasir Nawab

  197. Characterization of the cure shrinkage, reaction kinetics, bulk modulus and thermal conductivity of thermoset resin from a single experiment

    Article • Journal of Materials Science, November 2012, Springer Science + Business Media

    Dr Yasir Nawab

  198. Determination and modelling of the cure shrinkage of epoxy vinylester resin and associated composites by considering thermal gradients

    Article • Composites Science and Technology, November 2012, Elsevier

    Dr Yasir Nawab

  199. Evolution of chemical and thermal curvatures in thermoset-laminated composite plates during the fabrication process

    Article • Journal of Composite Materials, February 2012, SAGE Publications

    Dr Yasir Nawab

  200. Measurement and Modelling of Chemical Shrinkage of Thermoset Composites

    Article • Key Engineering Materials, February 2012, Trans Tech Publications

    Dr Yasir Nawab

  201. Shape Evolution of Carbon Epoxy Laminated Composite during Curing

    Article • Key Engineering Materials, February 2012, Trans Tech Publications

    Dr Yasir Nawab

  202. A Device to Measure the Shrinkage and Heat Transfers during the Curing Cycle of Thermoset Composites

    Article • Advanced Materials Research, September 2011, Trans Tech Publications

    Dr Yasir Nawab

  203. PREFACE

    Article • January 1969, Elsevier

    Professor Amlan Gupta, Dr Yasir Nawab

  204. 9. Disposal and Recycling of Textiles

    Article • De Gruyter

    Dr Yasir Nawab

  205. 4. Fabric Manufacturing

    Article • De Gruyter

    Dr Yasir Nawab, Mr Khubab Shaker