All Stories

  1. Effects of Processing and Geometry Parameters on Mass Deviation and Microstructure Evolution in Selective Laser Melted 316L Thin Struts

    Article • Materials, May 2026, MDPI AG

    Dr Xiulin Ji

  2. Melt pool state monitoring for wire laser-based directed energy deposition based on multi-kernel squeeze-and-excitation model-agnostic meta-learning

    Article • Optics & Laser Technology, May 2026, Elsevier

    Dr Xiulin Ji

  3. Phosphorus-enhanced tribocorrosion performance of laser clad AlCoCrFeNiTi high-entropy alloy coatings

    Article • Applied Surface Science, April 2026, Elsevier

    Dr Xiulin Ji

  4. Combining laser texturing and remelting for reducing friction and corrosive wear in Ti-based amorphous alloys

    Article • Precision Engineering, May 2025, Elsevier

    Dr Xiulin Ji

  5. Tribocorrosion Performance of Additive Manufactured and As-Forged Ti6Al4V in 3.5% NaCl Solution

    Article • Tribology Transactions, March 2025, Taylor & Francis

    Dr Xiulin Ji

  6. Corrosive wear behavior of a new medium manganese steel compared to 316L stainless steel in 3.5% NaCl solution

    Article • Surface Science and Technology, February 2025, Springer Science + Business Media

    Dr Xiulin Ji

  7. A novel strategy to significantly improve wear resistance of amorphous alloys by immersion in NaOH solution

    Article • Applied Surface Science, January 2025, Elsevier

    Dr Xiulin Ji

  8. Special Issue on Laser Surface Engineering for Tribology

    Article • Lubricants, March 2024, MDPI AG

    Dr Yong Sun, Dr Xiulin Ji

  9. Enhancing tribological performance of Ti6Al4V with additively manufactured porous architecture: A scanning interval approach

    Article • MRS Communications, January 2024, Springer Science + Business Media

    Dr Xiulin Ji

  10. Effect of Nb Addition on the Corrosion and Wear Resistance of Laser Clad AlCr2FeCoNi High-Entropy Alloy Coatings

    Article • Lubricants, December 2023, MDPI AG

    Dr Xiulin Ji

  11. Ultrasonic impact treatment of Ti-based amorphous alloy: Improved tribological performance in air and 3.5 % NaCl solution

    Article • Surface and Coatings Technology, September 2023, Elsevier

    Dr Xiulin Ji

  12. Experimental Study on the Influence of Surface Carbon Content on Crack Initiation for 20Cr2Ni4A Steel

    Article • January 2023, Springer Science + Business Media

    Dr Xiulin Ji

  13. Bonding mechanism in ultrasonic-assisted soldering of ZrO2 and 304 stainless steel using a micro-alloyed active solder alloy

    Article • Materials Letters, September 2022, Elsevier

    Dr Xiulin Ji

  14. Effect of Cryogenic Thermal Cycling on Tribocorrosion Performance of Fe-Based Bulk Amorphous Alloy in 3.5 Pct NaCl Solution

    Article • Metallurgical and Materials Transactions A, July 2022, Springer Science + Business Media

    Sheng Cao, Dr Xiulin Ji

  15. Effect of cyclic cryogenic treatment on tribological performance of Fe-based amorphous coatings in air and in 3.5% NaCl solution

    Article • Journal of Non-Crystalline Solids, May 2022, Elsevier

    Dr Xiulin Ji

  16. Wear Resistance of Fe-Based Amorphous Powder Deposited Coatings in Air, Water, and SBF Solution: Effect of Layer Number

    Article • Tribology Transactions, April 2022, Taylor & Francis

    Dr Xiulin Ji

  17. Tribocorrosion performance of 316L stainless steel enhanced by laser clad 2-layer coating using Fe-based amorphous powder

    Article • Journal of Materials Research and Technology, March 2022, Elsevier

    Dr Xiulin Ji

  18. Experimental Study on the Wear Properties of 42CrMo Steel with Different Microstructures and T15 Laser Cladding

    Article • Journal of Materials Engineering and Performance, February 2022, Springer Science + Business Media

    Dr Xiulin Ji

  19. Tribology of rejuvenated CuZr-based amorphous alloys

    Article • Wear, November 2021, Elsevier

    Dr Xiulin Ji

  20. Slurry erosion behavior of two Zr-based bulk metallic glasses

    Article • Wear, July 2021, Elsevier

    Dr Xiulin Ji

  21. The effect of impingement angle on erosion wear characteristics of HVOF sprayed WC-Ni and WC-Cr3C2-Ni cermet composite coatings

    Article • Materials Research Express, February 2020, Institute of Physics Publishing

    Dr Xiulin Ji

  22. Experimental Study on the Laser Cladding of T15 Coating for 42CrMo Steel

    Article • January 2020, Springer Science + Business Media

    Dr Xiulin Ji

  23. Corrosive wear of multi-layer Fe-based coatings laser cladded from amorphous powders

    Article • Wear, November 2019, Elsevier

    Dr Xiulin Ji

  24. Experimental investigation of hybrid laser arc welding of X80 pipeline steel

    Article • IOP Conference Series Materials Science and Engineering, December 2018, Institute of Physics Publishing

    Dr Xiulin Ji

  25. Sliding Wear of Spark Plasma Sintered CrFeCoNiCu High-Entropy Alloy Coatings: Effect of Aluminum Addition

    Article • Journal of Materials Engineering and Performance, September 2018, Springer Science + Business Media

    Dr Xiulin Ji

  26. Slurry erosion induced surface nanocrystallization of bulk metallic glass

    Article • Applied Surface Science, May 2018, Elsevier

    Dr Xiulin Ji

  27. Tribocorrosion of Fe-Based Amorphous Coating in Simulated Body Fluids

    Article • Lubricants, April 2018, MDPI AG

    Dr Xiulin Ji

  28. Slurry Erosion Wear Resistance and Impact-Induced Phase Transformation of Titanium Alloys

    Article • Tribology Letters, April 2018, Springer Science + Business Media

    Dr Xiulin Ji

  29. Modification of Tribolayers of a Titanium Alloy Sliding against a Steel

    Article • Journal of Tribology, March 2018, ASME International

    Dr Xiulin Ji

  30. Erosive wear resistance evaluation with the hardness after strain-hardening and its application for a high-entropy alloy

    Article • Wear, March 2018, Elsevier

    Dr Xiulin Ji

  31. Slurry Erosion Behavior of AlxCoCrFeNiTi0.5 High-Entropy Alloy Coatings Fabricated by Laser Cladding

    Article • Metals, February 2018, MDPI AG

    Dr Xiulin Ji

  32. Wear resistance of CuZr-based amorphous-forming alloys against bearing steel in 3.5% NaCl solution

    Article • The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics, August 2017, Taylor & Francis

    Dr Xiulin Ji

  33. Sliding wear of spark plasma sintered CrFeCoNiCu high entropy alloy coatings with MoS2 and WC additions

    Article • The International Journal of Advanced Manufacturing Technology, August 2017, Springer Science + Business Media

    Dr Xiulin Ji

  34. Dry Sliding Wear Behavior of Spark Plasma Sintered Fe-Based Bulk Metallic Glass/Graphite Composites

    Article • Technologies, September 2016, MDPI AG

    Dr Xiulin Ji

  35. Effect of phosphorous content on the microstructure and erosion–corrosion resistance of electrodeposited Ni-Co-Fe-P coatings

    Article • Surface and Coatings Technology, September 2016, Elsevier

    Dr Xiulin Ji

  36. On the microstructure and erosion–corrosion resistance of AlCrFeCoNiCu high-entropy alloy via annealing treatment

    Article • Materials Science and Technology, August 2016, SAGE Publications

    Dr Xiulin Ji

  37. Effect of Annealing Treatment on Erosion-Corrosion of Zr-Based Bulk Metallic Glass in Saline-Sand Slurry

    Article • Journal of Materials Engineering and Performance, May 2016, Springer Science + Business Media

    Dr Xiulin Ji

  38. Sliding tribocorrosion behavior of bulk metallic glass against bearing steel in 3.5% NaCl solution

    Article • Tribology International, November 2015, Elsevier

    Dr Xiulin Ji

  39. Effects of sliding velocity on tribo-oxides and wear behavior of Ti–6Al–4V alloy

    Article • Tribology International, November 2015, Elsevier

    Dr Xiulin Ji

  40. Slurry Erosion Resistance of Laser Clad NiCoCrFeAl3High-Entropy Alloy Coatings

    Article • Tribology Transactions, September 2015, Taylor & Francis

    Dr Xiulin Ji

  41. Dry Sliding Wear Characteristics of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si Alloy at Various Sliding Speeds

    Article • Metallurgical and Materials Transactions A, June 2015, Springer Science + Business Media

    Dr Xiulin Ji

  42. High-Temperature Sliding Wear Behavior of Zr-Based Bulk Amorphous Alloys

    Article • JOM, May 2015, Springer Science + Business Media

    Dr Xiulin Ji

  43. Relative effect of electronegativity on formation of high entropy alloys

    Article • International Journal of Cast Metals Research, April 2015, Maney Publishing

    Dr Xiulin Ji

  44. Abrasive wear resistance of dual phase steels DP980 and DP600

    Article • Journal of Iron and Steel Research International, April 2015, Springer Science + Business Media

    Dr Xiulin Ji

  45. A Combined Composition Design for Metallic Glasses from Thermodynamic and Structure Rules

    Article • Advanced Materials Research, July 2014, Trans Tech Publications

    Dr Xiulin Ji

  46. Effect of heat treatment on the slurry erosion resistance of high strength steel DP980

    Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), May 2014, Carl Hanser Verlag

    Dr Xiulin Ji

  47. Microstructure and Erosion Resistance of Hot-Dip-Aluminized 3Cr13 Steel

    Article • Advanced Materials Research, August 2013, Trans Tech Publications

    Dr Xiulin Ji

  48. Erosion–corrosion behavior of Zr-based bulk metallic glass in saline-sand slurry

    Article • Tribology International, April 2013, Elsevier

    Dr Xiulin Ji

  49. Erosion-Corrosion Behavior of Electrodeposited Amorphous Ni-W-P Coating in Saline-Sand Slurry

    Article • CORROSION, January 2013, NACE International

    Dr Xiulin Ji

  50. Microstructure evolution and erosion-corrosion resistance of amorphous Ni-P coatings

    Article • Metals and Materials International, August 2012, Springer Science + Business Media

    Dr Xiulin Ji

  51. Effect of Heat Treatment on Slurry Erosion Wear Resistance of Amorphous Ni-P Electrodeposits

    Article • Tribology Transactions, January 2012, Taylor & Francis

    Dr Xiulin Ji

  52. Enhanced glass forming ability of Fe-based alloys with minor additions

    Article • Frontiers of Materials Science in China, November 2010, Springer Science + Business Media

    Dr Xiulin Ji

  53. Cu-based bulk metallic glasses designed by stability evaluations of liquid and amorphous phases

    Article • Transactions of Nonferrous Metals Society of China, December 2009, Elsevier

    Dr Xiulin Ji

  54. A thermodynamic approach to assess glass-forming ability of bulk metallic glasses

    Article • Transactions of Nonferrous Metals Society of China, October 2009, Elsevier

    Dr Xiulin Ji

  55. A thermodynamic criterion for predicting glass-forming ability in binary metallic glasses

    Article • Materials & Design (1980-2015), March 2009, Elsevier

    Dr Xiulin Ji

  56. Predicting alloy compositions of bulk metallic glasses with high glass-forming ability

    Article • Materials Science and Engineering A, June 2008, Elsevier

    Dr Xiulin Ji

  57. Gibbs free energy difference in metallic glass forming liquids

    Article • Journal of Non-Crystalline Solids, July 2007, Elsevier

    Dr Xiulin Ji