Contact

All Stories

  1. Effect of Heat Treatment on Microstructure and Tensile Property of Laser-Powder-Bed-Melted Al–Mn–Mg–Sc–Zr Alloy

    Article • Materials, April 2025, MDPI AG

    Sheng Cao

  2. Correlations between local chemical fluctuations and grain boundary strength in Ti-Zr-Nb-Ta-Mo refractory multi-principal element alloys

    Article • Scripta Materialia, February 2025, Elsevier

    Sheng Cao

  3. Extraordinary tensile strength in laser powder bed fusion manufactured Al–Mn–Mg–Sc-Zr alloy with stable Al3Sc nano-precipitates at high temperatures

    Article • Journal of Alloys and Compounds, February 2025, Elsevier

    Sheng Cao

  4. Anisotropic microstructure and tensile property of laser powder bed fusion fabricated Al–Mn–Mg–Sc–Zr alloy built at different layer thickness

    Article • Journal of Materials Research and Technology, November 2024, Elsevier

    Sheng Cao

  5. Design and preparation of biomimetic "hard-soft" functional scaffold with gradient irregular pore structure for bone repair

    Article • Journal of Materials Research and Technology, November 2024, Elsevier

    Sheng Cao

  6. Formation of a protective oxides-nitrides compound layer with enhanced wear properties, corrosion resistance, and cytocompatibility on novel Ti-Zr-Nb-Ta-Mo multi-principal element alloy

    Article • Tribology International, November 2024, Elsevier

    Sheng Cao

  7. The effect of a keyhole defect on strain localisation in an additive manufactured titanium alloy

    Article • Journal of Materials Research and Technology, November 2024, Elsevier

    Sheng Cao

  8. Life cycle assessment of metal powder production: a Bayesian stochastic Kriging model-based autonomous estimation

    Article • Autonomous Intelligent Systems, October 2024, Springer Science + Business Media

    Sheng Cao

  9. Development of novel carbon-free cobalt-free iron-based hardfacing alloys with a hard π-ferrosilicide phase

    Article • Materialia, June 2024, Elsevier

    Sheng Cao

  10. Electropulses induced direct aging and ultrafast precipitation in additive manufactured 15-5 PH stainless steel

    Article • Materials Research Letters, May 2024, Taylor & Francis

    Sheng Cao

  11. Anisotropic tensile creep behavior in laser powder bed fusion manufactured Al–Mn–Mg–Sc–Zr alloy

    Article • Journal of Materials Research and Technology, January 2024, Elsevier

    Sheng Cao

  12. Multivariate relationships between microstructure evolution and strengthening mechanisms in laser powder bed fusion of Al-Mn-Sc alloy: towards improved fatigue performance

    Article • Light Advanced Manufacturing, January 2024, Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences

    Sheng Cao

  13. Effect of Heat Treatment on Gradient Microstructure and Tensile Property of Laser Powder Bed Fusion Fabricated 15-5 Precipitation Hardening Stainless Steel

    Article • Acta Metallurgica Sinica (English Letters), December 2023, Springer Science + Business Media

    Sheng Cao

  14. Strong and ductile Al–Mn–Mg–Sc–Zr alloy achieved in fabrication-rate enhanced laser powder bed fusion

    Article • Virtual and Physical Prototyping, August 2023, Taylor & Francis

    Sheng Cao

  15. A protective SiAlN coating on topographic surface of laser powder bed fusion manufactured Ti alloy

    Article • Corrosion Science, July 2023, Elsevier

    Sheng Cao

  16. Heat Treatment Optimization for a High Strength Al–Mn–Sc Alloy Fabricated by Selective Laser Melting

    Article • Materials, May 2023, MDPI AG

    Sheng Cao

  17. Effect of microstructural anisotropy on fracture toughness of selective laser melted 15‐5 PH stainless steel

    Article • steel research international, December 2022, Wiley

    Sheng Cao

  18. Role of microstructure heterogeneity on deformation behaviour in additive manufactured Ti-6Al-4V

    Article • Materialia, December 2022, Elsevier

    Sheng Cao

  19. High-Cycle Fatigue Behavior and Corresponding Microscale Deformation Mechanisms of Metastable Ti55511 Alloy with A Basket-Weave Microstructure

    Article • Materials, October 2022, MDPI AG

    Sheng Cao

  20. Effect of Cryogenic Thermal Cycling on Tribocorrosion Performance of Fe-Based Bulk Amorphous Alloy in 3.5 Pct NaCl Solution

    Article • Metallurgical and Materials Transactions A, July 2022, Springer Science + Business Media

    Sheng Cao, Dr Xiulin Ji

  21. In-situ formed graded microstructure and mechanical property of selective laser melted 15–5 PH stainless steel

    Article • Materials Science and Engineering A, July 2022, Elsevier

    Sheng Cao

  22. {332}<113> Twinning transfer behavior and its effect on the twin shape in a beta-type Ti-23.1Nb-2.0Zr-1.0O alloy

    Article • Journal of Material Science and Technology, November 2021, Elsevier

    Sheng Cao

  23. Graded hierarchical microstructure and mechanical property of electron beam melted Ti–5Al–5Mo–5V–3Cr–1Zr

    Article • Materials Science and Engineering A, September 2021, Elsevier

    Sheng Cao

  24. Microstructure and Mechanical Property of Ti–5Al–5Mo–5V–3Cr–1Zr Alloy Fabricated by Selective Laser Melting with a Preheated Substrate

    Article • Advanced Engineering Materials, July 2021, Wiley

    Sheng Cao

  25. Effect of strain rate and temperature on the deformation behavior in a Ti-23.1Nb-2.0Zr-1.0O titanium alloy

    Article • Journal of Material Science and Technology, May 2021, Elsevier

    Sheng Cao

  26. Effect of cooling rate on the 3D morphology of the proeutectic Al3Ni intermetallic compound formed at the Al/Ni interface after solidification

    Article • Journal of Material Science and Technology, April 2021, Elsevier

    Sheng Cao

  27. Heat-treatment induced microstructural evolution and enhanced mechanical property of selective laser melted near β Ti-5Al-5Mo-5 V-3Cr-1Zr alloy

    Article • Journal of Alloys and Compounds, March 2021, Elsevier

    Sheng Cao

  28. Microstructure and properties of aluminium alloy 6082 formed by the Hot Form Quench process

    Article • Materials Science and Engineering A, February 2021, Elsevier

    Sheng Cao

  29. Review of laser powder bed fusion (LPBF) fabricated Ti-6Al-4V: process, post-process treatment, microstructure, and property

    Article • Light Advanced Manufacturing, January 2021, Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences

    Sheng Cao

  30. Intergrowth mechanism and morphology prediction of faceted Al3Ni formed during solidification by a spatial geometric model

    Article • Journal of Material Science and Technology, October 2020, Elsevier

    Sheng Cao

  31. In Situ Analysis of Multiphase Compounds at the Liquid Al-Solid Cu Interface: Formation Sequence, Growth Kinetics and Critical Thickness

    Article • Metallurgical and Materials Transactions A, August 2020, Springer Science + Business Media

    Sheng Cao

  32. Fine equiaxed β grains and superior tensile property in Ti–6Al–4V alloy deposited by coaxial electron beam wire feeding additive manufacturing

    Article • Acta Metallurgica Sinica (English Letters), June 2020, Springer Science + Business Media

    Sheng Cao

  33. Effect of Si on the Growth Behavior of the Fe2Al5 Phase at Al-xSi(liquid)/Fe(solid) Interface During Holding by In-Situ Synchrotron Radiography

    Article • Metallurgical and Materials Transactions A, April 2020, Springer Science + Business Media

    Sheng Cao

  34. A New Sight of the Growth Characteristics of Solidified Al3Ni at the Liquid–Solid Interface by Synchrotron Radiography and 3D Tomography

    Article • Metallurgical and Materials Transactions A, March 2020, Springer Science + Business Media

    Sheng Cao

  35. A strong and ductile Ti-3Al-8V-6Cr-4Mo-4Zr (Beta-C) alloy achieved by introducing trace carbon addition and cold work

    Article • Scripta Materialia, March 2020, Elsevier

    Sheng Cao

  36. On the role of cooling rate and temperature in forming twinned α’ martensite in Ti–6Al–4V

    Article • Journal of Alloys and Compounds, January 2020, Elsevier

    Sheng Cao

  37. Process variation in Selective Laser Melting of Ti-6Al-4V alloy

    Article • MATEC Web of Conferences, January 2020, EDP Sciences

    Sheng Cao

  38. Hot Deformation Behavior of a New Al–Mn–Sc Alloy

    Article • Materials, December 2019, MDPI AG

    Sheng Cao

  39. Effects of boron addition on microstructures and mechanical properties of Ti-6Al-4V manufactured by direct laser deposition

    Article • Materials & Design, December 2019, Elsevier

    Sheng Cao

  40. Kinetic role of Cu content in reaction process, behavior and their relationship among Cu-Zr-C system

    Article • Journal of Material Science and Technology, October 2019, Elsevier

    Sheng Cao

  41. Ambiguous temperature difference in aerodynamic levitation process: Modelling, solving and application

    Article • Journal of Material Science and Technology, August 2019, Elsevier

    Sheng Cao

  42. Static coarsening behaviour of lamellar microstructure in selective laser melted Ti–6Al–4V

    Article • Journal of Material Science and Technology, August 2019, Elsevier

    Sheng Cao

  43. In-situ study on hydrogen bubble evolution in the liquid Al/solid Ni interconnection by synchrotron radiation X-ray radiography

    Article • Journal of Material Science and Technology, July 2019, Elsevier

    Sheng Cao

  44. Towards a high strength aluminium alloy development methodology for selective laser melting

    Article • Materials & Design, July 2019, Elsevier

    Sheng Cao

  45. Polymorphic transition and nucleation pathway of barium dititanate (BaTi2O5) during crystallization from undercooled liquid

    Article • Scientific Reports, May 2019, Springer Science + Business Media

    Sheng Cao

  46. Surface roughness and fatigue properties of selective laser melted Ti–6Al–4V alloy

    Article • January 2019, Elsevier

    Sheng Cao

  47. Continuous Morphological Transition and Its Mechanism of Al3Ni Phase at the Liquid–Solid Interface During Solidification

    Article • Metallurgical and Materials Transactions A, December 2018, Springer Science + Business Media

    Sheng Cao

  48. A Full View of the Interfacial Behavior Between the Liquid Al and Solid Ni by Synchrotron Radiation

    Article • Metallurgical and Materials Transactions A, October 2018, Springer Science + Business Media

    Sheng Cao

  49. Characterisation of AlScZr and AlErZr alloys processed by rapid laser melting

    Article • Scripta Materialia, July 2018, Elsevier

    Sheng Cao

  50. Role of martensite decomposition in tensile properties of selective laser melted Ti-6Al-4V

    Article • Journal of Alloys and Compounds, May 2018, Elsevier

    Sheng Cao

  51. Microstructural evolution and growth behavior of intermetallic compounds at the liquid Al/solid Fe interface by synchrotron X-ray radiography

    Article • Materials Characterization, February 2018, Elsevier

    Sheng Cao

  52. Porosity formation mechanisms and fatigue response in Al-Si-Mg alloys made by selective laser melting

    Article • Materials Science and Engineering A, January 2018, Elsevier

    Sheng Cao

  53. Defect, Microstructure, and Mechanical Property of Ti-6Al-4V Alloy Fabricated by High-Power Selective Laser Melting

    Article • JOM, September 2017, Springer Science + Business Media

    Sheng Cao

  54. The mechanism of aqueous stress-corrosion cracking of α + β titanium alloys

    Article • Corrosion Science, August 2017, Elsevier

    Sheng Cao

  55. Effects of microtexture and Ti3Al (α2) precipitates on stress-corrosion cracking properties of a Ti-8Al-1Mo-1V alloy

    Article • Corrosion Science, February 2017, Elsevier

    Sheng Cao