All Stories

  1. Lightweight epoxy materials reinforced with regrind from wind turbine blade waste: thermal and mechanical properties

    Article • International Journal of Lightweight Materials and Manufacture, August 2026, Elsevier

    Volodymyr Krasinskyi, Dr Rafał Malinowski

  2. ADVANCED PA6/PP COMPOSITES WITH PVP-MODIFIED MONTMORILLONITE: STRUCTURE AND PROPERTY EVALUATION

    Article • Journal of Sustainable Technologies, March 2026, Index Copernicus

    Volodymyr Krasinskyi

  3. Antibacterial and Hydrophobic PLA Biocomposites Enabled by Geraniol-Modified Flax Fibres

    Article • Polymers, January 2026, MDPI AG

    Volodymyr Krasinskyi

  4. Recycling waste from wind turbine blades by using post-consumer regrind as a filler in epoxy composites

    Article • January 2026, Elsevier

    Volodymyr Krasinskyi, Dr Rafał Malinowski

  5. Effect of Electron Radiation and Triallyl Isocyanurate on the Structure, Thermal, and Mechanical Properties of Epoxy Resin Filled with Dusty Fiber Fraction Derived from Recycled Wind Turbine Blades

    Article • Fibers, November 2025, MDPI AG

    Volodymyr Krasinskyi, Dr Rafał Malinowski

  6. Multifunctional properties of bio-poly(butylene succinate) reinforced with multiwalled carbon nanotubes

    Article • Beilstein Journal of Nanotechnology, July 2025, Beilstein Institut

    Volodymyr Krasinskyi

  7. Utilization of Wind Turbine Blade Waste in the Production of ABS Composites and Selected Products Based on These Composites

    Article • Polymers, March 2025, MDPI AG

    Volodymyr Krasinskyi, Dr Rafał Malinowski

  8. Polylactide films modified with glass microspheres - morphology and properties

    Article • Food Packaging and Shelf Life, December 2024, Elsevier

    Volodymyr Krasinskyi

  9. The Effect of Laponite on the Structure, Mechanical and Thermal Properties of Poly(butylene Succinate)

    Article • Polymers, November 2024, MDPI AG

    Volodymyr Krasinskyi, Dr Rafał Malinowski, Oleksandr Grytsenko

  10. Comparison of the Properties and Structure of Montmorillonites Modified with Polyvinylpyrrolidone

    Article • Applied Sciences, April 2024, MDPI AG

    Volodymyr Krasinskyi, Dr Rafał Malinowski

  11. Biodegradable polymer composite containing ground corn stalk modified with polydopamine

    Article • Journal of Applied Polymer Science, March 2024, Wiley

    Volodymyr Krasinskyi

  12. Study of Crystalline and Thermal Properties of Nanocomposites Based on Polyamide-6 and Modified Montmorillonite

    Article • Advances in Science and Technology – Research Journal, December 2023, Wydawnictwo Naukowe Gabriel Borowski (WNGB)

    Volodymyr Krasinskyi

  13. Long-term influence of soil environment conditions on the structure and selected properties of PLA packaging

    Article • Archives of Environmental Protection, September 2023, Polish Academy of Sciences Chancellery

    Volodymyr Krasinskyi, Dr Rafał Malinowski

  14. STUDY OF MONTMORILLONITE MODIFICATION TECHNOLOGY USING POLYVINYLPYRROLIDONE

    Article • Arabian Journal of Chemistry, September 2023, Elsevier

    Volodymyr Krasinskyi, Dr Rafał Malinowski

  15. Wpływ promieniowania UV-VIS na właściwości optyczne i mechaniczne folii PLA/PHB

    Article • PRZEMYSŁ CHEMICZNY, December 2022, Wydawnictwo SIGMA-NOT, sp. z.o.o.

    Volodymyr Krasinskyi, Dr Rafał Malinowski

  16. Prediction of the Properties of Modified Phenol-Formaldehyde Composites Using Mathematical Modeling of the Composition of the Polymer Mixture

    Article • Advances in Science and Technology – Research Journal, October 2022, Wydawnictwo Naukowe Gabriel Borowski (WNGB)

    Volodymyr Krasinskyi, Dr Rafał Malinowski

  17. The Manufacturing of Composite Materials in the Matrix of Modified Phenol-Formaldehyde Resins

    Article • Advances in Science and Technology – Research Journal, December 2021, Wydawnictwo Naukowe Gabriel Borowski (WNGB)

    Volodymyr Krasinskyi, Dr Rafał Malinowski

  18. The Structure and Mechanical Properties of Hemp Fibers-Reinforced Poly(ε-Caprolactone) Composites Modified by Electron Beam Irradiation

    Article • Applied Sciences, June 2021, MDPI AG

    Volodymyr Krasinskyi, Dr Rafał Malinowski

  19. Nanocomposites based on polyamide-6 and montmorillonite intercalated with polyvinylpyrrolidone

    Article • Polymer-Plastics Technology and Materials, May 2021, Taylor & Francis

    Volodymyr Krasinskyi

  20. ANALYSIS OF THE INFLUENCE OF INTERCALATED MONTMORILLONITE ON HOMOGENIZATION OF PP/PA-6 NANOCOMPOSITE IN MELT

    Article • MM Science Journal, March 2021, MM Publishing, s.r.o.

    Volodymyr Krasinskyi

  21. The use of numerical analysis of the injection process to select the material for the injection molding

    Article • Open Engineering, January 2021, De Gruyter

    Volodymyr Krasinskyi

  22. Nanocomposites Based on Polyamide and Montmorillonite Obtained from a Solution

    Article • Advances in Science and Technology – Research Journal, September 2020, Wydawnictwo Naukowe Gabriel Borowski (WNGB)

    Volodymyr Krasinskyi

  23. Numerical Modeling of p-v-T Rheological Equation Coefficients for Polypropylene with Variable Chalk Content

    Article • Open Engineering, December 2019, De Gruyter

    Mr. Ivan Gajdoš, Volodymyr Krasinskyi

  24. Effect of Nature and Amount of Polypropylene Composite Filler on the Productivity of Extruder with the Cylinder Equipped with Grooves

    Article • Advances in Science and Technology – Research Journal, December 2019, Wydawnictwo Naukowe Gabriel Borowski (WNGB)

    Volodymyr Krasinskyi

  25. REGULARITIES OF THE TECHNOLOGICAL RAW MATERIAL CREATION FOR EXTRUSION OF POLYETHYLENE PIPES

    Article • Chemistry Technology and Application of Substances, November 2019, Lviv Polytechnic National University

    Volodymyr Krasinskyi

  26. Study of the structure and thermal characteristics of nanocomposites based on polyvinyl alcohol and intercalated montmorillonite

    Article • Journal of Thermoplastic Composite Materials, October 2019, SAGE Publications

    Volodymyr Krasinskyi

  27. Novel Ni/pHEMA-gr-PVP Composites Obtained by Polymerization with Simultaneous Metal Deposition: Structure and Properties

    Article • Materials, June 2019, MDPI AG

    Oleksandr Grytsenko, Volodymyr Krasinskyi

  28. INVESTIGATION OF STRUCTURE OF NANOCOMPOSITES ON THE BASIS OF MIXTURE OF POLYPROPYLENE AND MODIFIED POLYAMIDE WITH USING SCANNING ELECTRONIC MICROSCOPY

    Article • Chemistry Technology and Application of Substances, June 2019, Lviv Polytechnic National University

    Volodymyr Krasinskyi

  29. Wpływ primerów na jakość odbitek cyfrowych atramentowych

    Article • PRZEGLĄD PAPIERNICZY, March 2019, Wydawnictwo SIGMA-NOT, sp. z.o.o.

    Volodymyr Krasinskyi

  30. The Role of Polyvinylpyrrolidone in the Formation of Nanocomposites Based on a Compatible Polycaproamide and Polypropylene

    Article • Chemistry & Chemical Technology, March 2019, Lviv Polytechnic National University

    Volodymyr Krasinskyi

  31. Investigation of Composite Materials based on Modified Novolac Phenol-Formaldehyde Resin

    Article • Acta Mechanica Slovaca, February 2019, Technical university of Kosice, Faculty of Mechanical Engineering

    Volodymyr Krasinskyi

  32. Drive System Parameters Influence on Run-Up Process of the Drilling Rig Pumping Unit

    Article • Advances in Science and Technology – Research Journal, December 2018, Wydawnictwo Naukowe Gabriel Borowski (WNGB)

    Volodymyr Krasinskyi

  33. DEVELOPMENT OF THE OBTAINING METHOD OF MONTMORILLONITE-POLYVINYLPYRROLIDONE MODIFIER FOR THE THERMOPLASTICS

    Article • Chemistry Technology and Application of Substances, November 2018, Lviv Polytechnic National University

    Volodymyr Krasinskyi

  34. EFFECT OF SMALL ADDITIVES OF POLYAMIDE MODIFIED BY POLYVINYLPYRROLIDONE AND MONTMORILLONITE ON POLYPROPYLENE TECHNOLOGICAL PROPERTIES AND HEAT RESISTANCE

    Article • Advances in Science and Technology – Research Journal, June 2018, Wydawnictwo Naukowe Gabriel Borowski (WNGB)

    Volodymyr Krasinskyi

  35. Rheological Properties of Compositions Based on Modified Polyvinyl Alcohol

    Article • Advances in Science and Technology – Research Journal, September 2017, Wydawnictwo Naukowe Gabriel Borowski (WNGB)

    Volodymyr Krasinskyi

  36. Nanocomposites on the Basis of Thermoplastics and Montmorillonite Modified by Polyvinylpyrrolidone

    Article • Key Engineering Materials, September 2017, Trans Tech Publications

    Volodymyr Krasinskyi

  37. Analysis of the Mechanical Properties Change of PA6/MMT Nanocomposite System after Ageing

    Article • Key Engineering Materials, September 2017, Trans Tech Publications

    Volodymyr Krasinskyi

  38. Investigation of the impact of modified montmorillonite on the viscosity of the solutions of polyvinyl alcohol

    Article • September 2017, Institute of Electrical & Electronics Engineers (IEEE)

    Volodymyr Krasinskyi

  39. Thermogravimetric research into composites based on the mixtures of polypropylene and modified polyamide

    Article • Eastern-European Journal of Enterprise Technologies, August 2017, Private Company Technology Center

    Volodymyr Krasinskyi

  40. Influence of Rotational Moulding Process Parameters on Accuracy of Polymer Casts

    Article • Acta Mechanica Slovaca, March 2017, Technical university of Kosice, Faculty of Mechanical Engineering

    Volodymyr Krasinskyi

  41. Operational Properties of Nanocomposites based on Polycaproamide and Modified Montmorillonite

    Article • Acta Mechanica Slovaca, March 2016, Technical university of Kosice, Faculty of Mechanical Engineering

    Volodymyr Krasinskyi

  42. Efficiency evaluation of manufacturing thin porous shells by extrusion

    Article • Eastern-European Journal of Enterprise Technologies, June 2015, Private Company Technology Center

    Volodymyr Krasinskyi

  43. The Influence of Modifying HDPE on Properties of the Surface

    Article • Materials Science Forum, May 2015, Trans Tech Publications

    Volodymyr Krasinskyi

  44. Heat-Resistant Coatings on the Basis of Phenol-Formaldehyde Compositions

    Article • Materials Science Forum, May 2015, Trans Tech Publications

    Mr. Ivan Gajdoš, Volodymyr Krasinskyi

  45. Surface Finish Techniques for FDM Parts

    Article • Materials Science Forum, May 2015, Trans Tech Publications

    Mr. Ivan Gajdoš, Volodymyr Krasinskyi

  46. Influence of Aluminosilicate Filler on the Physicomechanical Properties of Polypropylene-Polycaproamide Composites

    Article • Materials Science, September 2014, Springer Science + Business Media

    Volodymyr Krasinskyi

  47. Distribution and Geometric Characteristics of Pores and the Strength Properties of Extrudates Obtained by the Twin-Screw Extrusion

    Article • Materials Science, May 2014, Springer Science + Business Media

    Volodymyr Krasinskyi

  48. EFFECTIVENESS OF CELLULAR INJECTION MOLDING PROCESS

    Article • Advances in Science and Technology – Research Journal, June 2013, Index Copernicus

    Volodymyr Krasinskyi

  49. Ammonia-free, Low-toxic Press-materials with Improved Electroinsulating Properties Based on Modified Novolak Phenol-formaldehyde Resin

    Article • Chemistry & Chemical Technology, June 2012, Lviv Polytechnic National University

    Volodymyr Krasinskyi

  50. Influence of the mechanism and parameters of hardening of modified novolac phenol-formaldehyde resins on the physicomechanical properties of the composite

    Article • Materials Science, March 2011, Springer Science + Business Media

    Oleksandr Grytsenko, Volodymyr Krasinskyi