All Stories

  1. PLA Biocomposites Reinforced with Cinnamon-Treated Flax Fibers

    Article • Materials, April 2026, MDPI AG

    Dr Rafał Malinowski

  2. Recycling waste from wind turbine blades by using post-consumer regrind as a filler in epoxy composites

    Article • January 2026, Elsevier

    Volodymyr Krasinskyi, Dr Rafał Malinowski

  3. Surface metallisation of acrylonitrile–butadiene–styrene (ABS) composites via a novel electroplating technique

    Article • Applied Surface Science, December 2025, Elsevier

    Dr Rafał Malinowski

  4. Effect of Electron Radiation and Triallyl Isocyanurate on the Structure, Thermal, and Mechanical Properties of Epoxy Resin Filled with Dusty Fiber Fraction Derived from Recycled Wind Turbine Blades

    Article • Fibers, November 2025, MDPI AG

    Volodymyr Krasinskyi, Dr Rafał Malinowski

  5. Utilization of Wind Turbine Blade Waste in the Production of ABS Composites and Selected Products Based on These Composites

    Article • Polymers, March 2025, MDPI AG

    Volodymyr Krasinskyi, Dr Rafał Malinowski

  6. The Effect of Laponite on the Structure, Mechanical and Thermal Properties of Poly(butylene Succinate)

    Article • Polymers, November 2024, MDPI AG

    Volodymyr Krasinskyi, Dr Rafał Malinowski, Oleksandr Grytsenko

  7. Radiolysis of composite polypropylene/hemp fibers

    Article • Nukleonika, June 2024, De Gruyter

    Dr Rafał Malinowski

  8. New type of primers based on polypropylene grafted maleic anhydride (PP-g-MAH) –strength analysis

    Article • International Journal of Adhesion and Adhesives, June 2024, Elsevier

    Dr Rafał Malinowski

  9. Comparison of the Properties and Structure of Montmorillonites Modified with Polyvinylpyrrolidone

    Article • Applied Sciences, April 2024, MDPI AG

    Volodymyr Krasinskyi, Dr Rafał Malinowski

  10. Effect of Low-Temperature Plasma Treatment of Ti-Alloy Surface on Tannic Acid Coating Deposition

    Article • Materials, February 2024, MDPI AG

    Dr Mariusz Winiecki, Dr Rafał Malinowski

  11. Polycaprolactone-Based Films Incorporated with Birch Tar—Thermal, Physicochemical, Antibacterial, and Biodegradable Properties

    Article • Foods, November 2023, MDPI AG

    Dr Rafał Malinowski

  12. Long-term influence of soil environment conditions on the structure and selected properties of PLA packaging

    Article • Archives of Environmental Protection, September 2023, Polish Academy of Sciences Chancellery

    Volodymyr Krasinskyi, Dr Rafał Malinowski

  13. STUDY OF MONTMORILLONITE MODIFICATION TECHNOLOGY USING POLYVINYLPYRROLIDONE

    Article • Arabian Journal of Chemistry, September 2023, Elsevier

    Volodymyr Krasinskyi, Dr Rafał Malinowski

  14. Modification of Polycaprolactone with Plant Extracts to Improve the Aging Resistance

    Article • Materials, July 2023, MDPI AG

    Dr Rafał Malinowski

  15. The structure and selected properties of poly(ε-caprolactone)-based biodegradable composites with high calcium carbonate concentration

    Article • The Science of The Total Environment, April 2023, Elsevier

    Dr Rafał Malinowski

  16. New ionic liquids based on the biguanide cation with antimicrobial properties for applications in the textile and polymer materials industries

    Article • Fibres and Textiles in Eastern Europe, February 2023, De Gruyter

    Dr Rafał Malinowski

  17. Effect of Modification with a Biocide Containing Metal Nanoparticles on Selected LDPE Properties

    Article • Journal of Composites Science, January 2023, MDPI AG

    Dr Rafał Malinowski

  18. Wpływ promieniowania UV-VIS na właściwości optyczne i mechaniczne folii PLA/PHB

    Article • PRZEMYSŁ CHEMICZNY, December 2022, Wydawnictwo SIGMA-NOT, sp. z.o.o.

    Volodymyr Krasinskyi, Dr Rafał Malinowski

  19. Electron-induced structural changes in flax fiber reinforced PLA/PCL composites, analyzed using the rule of mixtures

    Article • Industrial Crops and Products, November 2022, Elsevier

    Dr Rafał Malinowski

  20. Birch Tar Introduced into Polylactide and Its Influence on the Barrier, Thermal, Functional and Biological Properties of the Film Obtained by Industrial Extrusion

    Article • Materials, October 2022, MDPI AG

    Dr Rafał Malinowski

  21. Prediction of the Properties of Modified Phenol-Formaldehyde Composites Using Mathematical Modeling of the Composition of the Polymer Mixture

    Article • Advances in Science and Technology – Research Journal, October 2022, Wydawnictwo Naukowe Gabriel Borowski (WNGB)

    Volodymyr Krasinskyi, Dr Rafał Malinowski

  22. Bactericidal Properties of Low-Density Polyethylene (LDPE) Modified with Commercial Additives Used for Food Protection in the Food Industry

    Article • Environments, July 2022, MDPI AG

    Dr Rafał Malinowski

  23. The Manufacturing of Composite Materials in the Matrix of Modified Phenol-Formaldehyde Resins

    Article • Advances in Science and Technology – Research Journal, December 2021, Wydawnictwo Naukowe Gabriel Borowski (WNGB)

    Volodymyr Krasinskyi, Dr Rafał Malinowski

  24. Copper Electroless Metallization of Cellulose Paper via Polydopamine Coating and Silver Catalyst

    Article • Materials, November 2021, MDPI AG

    Dr Rafał Malinowski

  25. New Organophilic Montmorillonites with Lactic Acid Oligomers and Other Environmentally Friendly Compounds and Their Effect on Mechanical Properties of Polylactide (PLA)

    Article • Materials, October 2021, MDPI AG

    Dr Rafał Malinowski

  26. Surface modification of maize stem with polydopamine and tannic acid coatings

    Article • Surfaces and Interfaces, October 2021, Elsevier

    Dr Rafał Malinowski

  27. Laser Activated and Electroless Metalized Polyurethane Coatings Containing Copper(II) L-Tyrosine and Glass Microspheres

    Article • Molecules, September 2021, MDPI AG

    Dr Rafał Malinowski

  28. Bactericidal and Fungistatic Properties of LDPE Modified with a Biocide Containing Metal Nanoparticles

    Article • Materials, July 2021, MDPI AG

    Dr Rafał Malinowski

  29. The Structure and Mechanical Properties of Hemp Fibers-Reinforced Poly(ε-Caprolactone) Composites Modified by Electron Beam Irradiation

    Article • Applied Sciences, June 2021, MDPI AG

    Volodymyr Krasinskyi, Dr Rafał Malinowski

  30. Plant extracts as natural additives for environmentally friendly polylactide films

    Article • Food Packaging and Shelf Life, December 2020, Elsevier

    Dr Rafał Malinowski

  31. Copper Filled Poly(Acrylonitrile-co-Butadiene-co-Styrene) Composites for Laser-Assisted Selective Metallization

    Article • Materials, May 2020, MDPI AG

    Dr Rafał Malinowski

  32. Studies on the Uncrosslinked Fraction of PLA/PBAT Blends Modified by Electron Radiation

    Article • Materials, February 2020, MDPI AG

    Dr Rafał Malinowski

  33. Studies on Manufacturing, Mechanical Properties and Structure of Poly(butylene adipate-co-terephthalate)-based Green Composites Modified by Coconut Fibers

    Article • International Journal of Precision Engineering and Manufacturing-Green Technology, January 2020, Springer Science + Business Media

    Dr Rafał Malinowski

  34. TG-FTIR coupled analysis to predetermine effective precursors for laser-activated and electroless metallized materials

    Article • Journal of Thermal Analysis and Calorimetry, November 2019, Springer Science + Business Media

    Dr Rafał Malinowski

  35. Laser-induced surface activation and electroless metallization of polyurethane coating containing copper(II) L-tyrosine

    Article • Applied Surface Science, October 2019, Elsevier

    Dr Rafał Malinowski

  36. Composting of Polylactide Containing Natural Anti-Aging Compounds of Plant Origin

    Article • Polymers, September 2019, MDPI AG

    Dr Rafał Malinowski

  37. Advances in studies of thermal degradation of polymeric materials. Part II. The influence of various factors on the thermal degradation of polymeric materials during their processing

    Article • Polimery, May 2019, Industrial Chemistry Research Institute

    Dr Rafał Malinowski

  38. The Effect of Accelerated Aging on Polylactide Containing Plant Extracts

    Article • Polymers, March 2019, MDPI AG

    Dr Rafał Malinowski

  39. Advances in studies of thermal degradation of polymeric materials Part I. Literature studies

    Article • Polimery, January 2019, Industrial Chemistry Research Institute

    Dr Rafał Malinowski

  40. Selected properties of polycaprolactone containing natural anti-aging compounds

    Article • Advances in Polymer Technology, September 2018, Wiley

    Dr Rafał Malinowski

  41. Mechanical properties and biodegradability of flax fiber-reinforced composite of polylactide and polycaprolactone

    Article • Polimery, September 2018, Industrial Chemistry Research Institute

    Dr Rafał Malinowski

  42. Selected properties of polylactide containing natural antiaging compounds

    Article • Polymers for Advanced Technologies, August 2018, Wiley

    Dr Rafał Malinowski

  43. Some effects of radiation treatment of biodegradable PCL/PLA blends

    Article • Journal of Power Electronics, February 2018, De Gruyter

    Dr Rafał Malinowski

  44. Flax fibres reinforced polylactide modified by ionizing radiation

    Article • Industrial Crops and Products, February 2018, Elsevier

    Dr Rafał Malinowski

  45. Analysis of swelling degree and gel fraction of polylactide/poly(butylene adipate-co-terephthalate) blends crosslinked by radiation

    Article • Polimery, January 2018, Industrial Chemistry Research Institute

    Dr Rafał Malinowski

  46. Some effects of foaming of the poly(butylene adipate-co -terephthalate) modified by electron radiation

    Article • Polymers for Advanced Technologies, December 2017, Wiley

    Dr Rafał Malinowski

  47. Flax fibers reinforced polycaprolactone modified by triallyl isocyanurate and electron radiation

    Article • Polymer Composites, November 2017, Wiley

    Dr Rafał Malinowski

  48. Effects of UV radiation on some properties of dyed polylactide film

    Article • Polimery, March 2017, Industrial Chemistry Research Institute

    Dr Rafał Malinowski

  49. Some properties of polylactide modified with polycaprolactone Wybrane właściwości polilaktydu modyfikowanego polikaprolaktonem

    Article • PRZEMYSŁ CHEMICZNY, January 2017, Wydawnictwo SIGMA-NOT, sp. z.o.o.

    Dr Rafał Malinowski

  50. Application of thermogravimetry in the assessment of coatings ability to be metallized

    Article • Journal of Thermal Analysis and Calorimetry, October 2016, Springer Science + Business Media

    Dr Rafał Malinowski

  51. Mechanical properties of PLA/PCL blends crosslinked by electron beam and TAIC additive

    Article • Chemical Physics Letters, October 2016, Elsevier

    Dr Rafał Malinowski

  52. Laser modification of polylactide surface layer prior autocatalytic metallization

    Article • Surface and Coatings Technology, October 2016, Elsevier

    Dr Rafał Malinowski

  53. Stability studies of plasma modification effects of polylactide and polycaprolactone surface layers

    Article • Applied Surface Science, July 2016, Elsevier

    Dr Rafał Malinowski

  54. Effect of high energy β-radiation and addition of triallyl isocyanurate on the selected properties of polylactide

    Article • Nuclear Instruments and Methods in Physics Research Section B Beam Interactions with Materials and Atoms, June 2016, Elsevier

    Dr Rafał Malinowski

  55. Forensic engineering of advanced polymeric materials. Part III - Biodegradation of thermoformed rigid PLA packaging under industrial composting conditions

    Article • Waste Management, June 2016, Elsevier

    Dr Rafał Malinowski

  56. Application of the electron radiation and triallyl isocyanurate for production of aliphatic-aromatic co-polyester of modified properties

    Article • The International Journal of Advanced Manufacturing Technology, April 2016, Springer Science + Business Media

    Dr Rafał Malinowski

  57. Antimicrobial carbon materials incorporating copper nano-crystallites and their PLA composites

    Article • Journal of Applied Polymer Science, February 2016, Wiley

    Dr Rafał Malinowski

  58. Influence of Specific Processing Conditions and Aliphatic-Aromatic Copolyester on Polylactide Properties

    Article • Chemical Engineering Communications, January 2016, Taylor & Francis

    Dr Rafał Malinowski

  59. Studies on functional properties of PCL films modified by electron radiation and TAIC additive

    Article • Polymer Testing, December 2015, Elsevier

    Dr Rafał Malinowski

  60. Comparison of some effects of modification of a polylactide surface layer by chemical, plasma, and laser methods

    Article • Applied Surface Science, August 2015, Elsevier

    Dr Rafał Malinowski

  61. Effect of electron radiation and triallyl isocyanurate on the average molecular weight and crosslinking of poly(ε -caprolactone)

    Article • Polymers for Advanced Technologies, July 2015, Wiley

    Dr Rafał Malinowski

  62. Influence of glass microspheres on selected properties of polylactide composites

    Article • Composites Part B Engineering, July 2015, Elsevier

    Dr Rafał Malinowski

  63. Autocatalytic metallization of polylactide

    Article • Polimery, July 2015, Industrial Chemistry Research Institute

    Dr Rafał Malinowski

  64. Influence of DC plasma modification on the selected properties and the geometrical surface structure of polylactide prior to autocatalytic metallization

    Article • Materials Chemistry and Physics, March 2015, Elsevier

    Dr Rafał Malinowski

  65. Assessment of dicumyl peroxide ability to improve adhesion between polylactide and flax or hemp fibres

    Article • Composite Interfaces, June 2014, Taylor & Francis

    Dr Rafał Malinowski

  66. The soluble copolymers of polyalkylthiophenes with different molar ratios of co-mers

    Article • Journal of Power Electronics, January 2014, De Gruyter

    Dr Rafał Malinowski

  67. Tough blends of poly(lactide) and amorphous poly([R,S]-3-hydroxy butyrate) – morphology and properties

    Article • European Polymer Journal, November 2013, Elsevier

    Dr Rafał Malinowski

  68. A comparative analysis of mass losses of some aliphatic polyesters upon enzymatic degradation

    Article • Polymer Testing, April 2013, Elsevier

    Dr Rafał Malinowski

  69. Some composting and biodegradation effects of physically or chemically crosslinked poly(lactic acid)

    Article • Polymer Testing, February 2012, Elsevier

    Dr Rafał Malinowski

  70. Influence of Dicumyl Peroxide Content on Thermal and Mechanical Properties of Polylactide

    Article • International Polymer Processing, November 2011, Carl Hanser Verlag

    Dr Rafał Malinowski

  71. Low-temperature plasma modification of polymers — Methods and equipment

    Article • Polimery, March 2011, Industrial Chemistry Research Institute

    Dr Rafał Malinowski

  72. Influence of some crosslinking agents on thermal and mechanical properties of electron beam irradiated polylactide

    Article • Radiation Physics and Chemistry, October 2010, Elsevier

    Dr Rafał Malinowski

  73. GC/MS analysis of gaseous degradation products formed during extrusion blow molding process of PE films

    Article • Chemical Papers, January 2010, Springer Science + Business Media

    Dr Rafał Malinowski