All Stories

  1. Architectural Control of TiO 2 -GO Hybrids via Graphene Oxide Concentration: Balancing Adsorption and Photocatalysis
  2. Effects of heavy alkali metals (Rb, Cs) post-deposition treatments on CuInGaSe2 using a spin-coating technique
  3. Optical and Electrical Properties of TiO2-GO Nanostructures by Ball-Milling
  4. Synthesis of TiO2/CuO/GO nanocomposite for the photocatalytic degradation of methylene blue
  5. BiVO4 synthesized by the combustion method: a comparison between orange peel powder and urea used as fuel
  6. Review on the developments in copper indium gallium diselenide (CIGSe)-based thin film photovoltaic devices
  7. Influence of GO oxidation degrees on the organization and physical features of TiO2–GO-based nanocomposites for water dye removal
  8. Multifunctional capabilities of radio frequency sputtered GO-TiO2 nanocomposite ultra-thin films
  9. A computational study for understanding the effect of various parameters on the performance of three different CI(G)Se-based thin film solar cells
  10. Analysis of the bonding’s energy in metal-halide perovskites and brief evaluation of meta-GGA functionals TPSS and revTPSS
  11. Impact of selenization with NaCl treatment on the physical properties and solar cell performance of crack-free Cu(In,Ga)Se2 microcrystal absorbers
  12. Photovoltaics Beyond Silicon
  13. Unveiling the optimal selenization temperature for enhancing efficiency in flexible Cu(In,Ga)Se2 thin film solar cells
  14. Variation in the bandgap by gradual reduction of GOs with different oxidation degrees: A DFT analysis
  15. G and GO interaction into TiO2 (010) anatase and its influence on the bandgap: DFT Study
  16. SCAPS Simulation on CIGSe Thin Film Solar Cells: Effect of the Defects
  17. Study the properties of Ball-Milled Vanadium Oxide Powders for Gas Sensor Applications
  18. Unravelling the intricacies of selenization in sequentially evaporated Cu(In,Ga)Se2 Thin film solar cells on flexible substrates
  19. Mechanisms of dyes adsorption on titanium oxide– graphene oxide nanocomposites
  20. Analysis of hybrid-deposited CI(G)Se thin films and theoretical modeling of their properties through SCAPS-1D software
  21. Calcium–Magnesium oxide by the ball-milling method using eggshell as calcium source: its study for photodegradation of methylene blue
  22. Radio frequency (RF) sputtered ZrO2-ZnO-TiO2 coating: An example of multifunctional benefits for thin film solar cells on the flexible substrate
  23. Effect of the oxidation degree on the bandgap of graphene oxides by Tour method
  24. MB adsorption by TiO2/GO nanocomposites: A comparison of the synthesis method
  25. Simulation of Theoretical and Experimental Parameters of Materials Used in CIGSe Thin Film Solar Cells by SCAPS software
  26. Study the Effect of Annealing Treatment on the Properties of CdS Thin Films Grown by the Chemical Bath Deposition Method
  27. The visible-light-driven photocatalytic reduction of Cr 6+ using BiVO 4 : assessing the effect of Au deposition and the reaction parameters
  28. Parametric Optimization of Ball-Milled Bimetallic Nanoadsorbents for the Effective Removal of Arsenic Species
  29. Chalcogenide BaZrS3 perovskite solar cells: A numerical simulation and analysis using SCAPS-1D
  30. Synthesis and Characterization of Epoxy-Rich TMOs Deposited on Stainless Steel for Corrosion Applications
  31. ZrO2/ZnO/TiO2 Nanocomposite Coatings on Stainless Steel for Improved Corrosion Resistance, Biocompatibility, and Antimicrobial Activity
  32. Unraveling rapid one-pot synthesis of Cu(In,Ga)Se2 microcrystal light absorber with tunable morphology and its influence on the solar cell performance
  33. Corrigendum to “Selective laser sintering of metallic oxide powder mixtures for bi/tri-metallic-oxide formation” [Mater. Lett. 286 (2021) 129215]
  34. Impact of selenization temperature on the performance of sequentially evaporated CuInSe2 thin film solar cells
  35. Synthesis of Bivo4 and Au/Bivo4 Nanocomposites to Achieve the Visible-Light-Driven Photocatalytic Reduction of Cr+6 in Pure and Tap Water – Optimization of the Reaction Conditions
  36. Bandgap dependence on facet and size engineering of TiO2: A DFT Study
  37. Numerical Optimization of Materials Properties for High-Efficiency CISe Thin Film Solar Cells Using SCAPS-1D Simulator
  38. Numerical Study of the Recombination Profiles in CIGSe Thin Film Solar Cells Through Silvaco Atlas Simulator after using Experimental Parameters
  39. Efficient 2T CsKPb(IBr)3—Tin Incorporated Narrow Bandgap Perovskite Tandem Solar Cells: A Numerical Study with Current Matching Conditions
  40. Engineered Zr/Zn/Ti oxide nanocomposite coatings for multifunctionality
  41. Correction to: Mechanical activation of TiO2/Fe2O3 nanocomposite for arsenic adsorption: effect of ball-to-powder ratio and milling time
  42. Graphene oxide decorated TiO2 and BiVO4 nanocatalysts for enhanced visible-light-driven photocatalytic bacterial inactivation
  43. Impact of target power on the properties of sputtered intrinsic zinc oxide (i-ZnO) thin films and its thickness dependence performance on CISe solar cells
  44. Optimization of Cu(In, Ga)Se2 (CIGSe) thin film solar cells parameters through numerical simulation and experimental study
  45. Review on the effects due to alkali metals on copper–indium–gallium–selenide solar cells
  46. Copper and Bismuth incorporated mixed cation perovskite solar cells by one-step solution process
  47. Effect of bismuth iodide (BiI3) interfacial layer with different HTL’s...
  48. Selective laser sintering of metallic oxide powder mixtures for bi/tri-metallic-oxide formation
  49. Mechanical activation of TiO2/Fe2O3 nanocomposite for arsenic adsorption: effect of ball-to-powder ratio and milling time
  50. Structural features and morphology of titanium dioxide–bismuth vanadate heterojunctions
  51. Unveiling the impact of Cu content on the physical properties and photovoltaic performance of solution‐processed Cu(In,Ga)Se 2 solar cell absorber
  52. Occurrence, distribution and provenance of micro plastics: A large scale quantitative analysis of beach sediments from southeastern coast of South Africa
  53. Characterization of BiVO4 Modified TiO2 and its Application in the Water Treatment
  54. GO/BiVO4 NANOCOMPOSITES FOR Escherichia coli K12 PHOTOCATALYTIC INACTIVATION
  55. Growth of In2Se3 Thin Films Prepared by the Pneumatic Spray Pyrolysis Method for Thin Film Solar Cells Applications
  56. Large Area (10 x10 cm2) Production of CdS Buffer Layer for Solar Cells by Chemical Bath Method
  57. Mechanical Stability Study of BULK FAXM3 Perovskites
  58. Properties Of Ultra-Thin Radio-frequency Sputtered Aluminum Doped Zinc Oxide Thin Films For Solar Cell Applications
  59. Synthesis and characterization of zinc oxide nanowires on aluminium oxide substrate
  60. Stability threshold of formamidinium lead iodide determined by strain amplitudes
  61. Electronic and optical competence of TiO2/BiVO4 nanocomposites in the photocatalytic processes
  62. Experimental and SCAPS simulated formamidinium perovskite solar cells: A comparison of device performance
  63. Study Of The Effects Of Non-Vacuum Deposited Alkali-Metals On Copper-Indium-Gallium-Selenide Absorber Layers For Solar Cells
  64. Recent trends in Advanced Functional Semiconducting Materials (selected papers from the IMRC2019, Cancun, Mexico, 18–23 August 2019, Symposium on Advances in Functional Semiconducting Materials)
  65. Perspectives of chalcopyrite-based CIGSe thin-film solar cell: a review
  66. Comparative study of optimised molybdenum back-contact deposition with different barriers (Ti, ZnO) on stainless steel substrate for flexible solar cell application
  67. Comparative studies of CdS thin films by chemical bath deposition techniques as a buffer layer for solar cell applications
  68. Statistical experimental design to optimize RF-sputtered NiTiO3 thin films
  69. Nanomaterials synthesis and characterization
  70. Time-dependent evolution pathway of CIGSe nanocrystals by low-temperature process
  71. Structural and optical properties of CZTS nanoparticles prepared by a colloidal process
  72. Effects of changes on temperature and fluorine concentration in the structural, optical and electrical properties of SnO2:F thin films
  73. Gold-Iron oxide yolk-shell nanoparticles (YSNPs) as magnetic probe for fluorescence-based detection of 3 base mismatch DNA
  74. Telescoping synthesis and goldilocks of CZTS nanocrystals
  75. Cu2ZnSn(S,Se)4 thin-films prepared from selenized nanocrystals ink
  76. Solution based synthesis of Cu(In,Ga)Se2 microcrystals and thin films
  77. Biofunctionalized MnFe2O4@Au core–shell nanoparticles for pH-responsive drug delivery and hyperthermal agent for cancer therapy
  78. 12 Possible Orientations of organic Formamidinium cation and its structural analysis by First Principles calculations using Van der Waals-Density functional Theory
  79. Characterizations of a Selenized Cu(In<inf>1-x</inf>Ga<inf>x</inf>)Se<inf>2</inf> Thin Film Absorber Layer Fabricated By a Three-Stage Hybrid Method
  80. Structural, Morphological, Topographical, and Electrical Properties of Selenized Stacked CIGSe Layers by Evaporation Technique
  81. Editorial
  82. Structure, magnetic and cytotoxic behaviour of solvothermally grown Fe3O4@Au core-shell nanoparticles
  83. Cu, Mo-doped and pristine-BiVO4 thin films prepared by rf sputtering process for photocatalytic applications
  84. Hot injection synthesis of Cu(In, Ga)Se2 nanocrystals with tunable bandgap
  85. Deposition and characterization of ultrathin intrinsic zinc oxide (i-ZnO) films by radio frequency (RF) sputtering for propane gas sensing application
  86. Electrical, structural, and topographical properties of direct current (DC) sputtered bilayer molybdenum thin films
  87. Photocatalytic degradation of Orange G using TiO2/Fe3O4 nanocomposites
  88. Electronic structure and optical properties of SnO2:F from PBE0 hybrid functional calculations
  89. Structural and morphological data of RF-Sputtered BiVO4 thin films
  90. Selenization of CIS and CIGS layers deposited by chemical spray pyrolysis
  91. Nanostructured bismuth vanadate (BiVO4) thin films for efficient visible light photocatalysis
  92. Preparation and characterization of Cu2ZnSnSe4and Cu2ZnSn(S,Se)4powders by ball milling process for solar cells application
  93. Influence of defect luminescence and structural modification on the electrical properties of Magnesium Doped Zinc Oxide Nanorods
  94. Design and evaluation of surface functionalized superparamagneto-plasmonic nanoparticles for cancer therapeutics
  95. Synthesis and Characterization of Polyol-Assisted Nano Cu0.2Ni0.2Sn0.2Ba0.4 Fe2O4 by a Wet Hydroxyl Route
  96. Water-dispersible magnetite nanoparticles as T 2 MR imaging contrast agent
  97. Microplastics in tourist beaches of Huatulco Bay, Pacific coast of southern Mexico
  98. Plasmonic/Magnetic Multifunctional nanoplatform for Cancer Theranostics
  99. Facile one pot synthesis of single phase kesterite Cu2ZnSnS4 nanocrystals
  100. Influence of reaction time on Cu(In,Ga)Se2 particles synthesis by thermal decomposition method
  101. High Energy Ball-Milling Synthesis of Nanostructured Ag-Doped and BiVO4-Based Photocatalysts
  102. Cytotoxicity of semiconductor nanoparticles in A549 cells is attributable to their intrinsic oxidant activity
  103. Camphor-mediated synthesis of carbon nanoparticles, graphitic shell encapsulated carbon nanocubes and carbon dots for bioimaging
  104. Structure-dependent anisotropy of the photoinduced optical nonlinearity in calcium doped ZnO nanorods grown by low cost hydrothermal method for photonic device applications
  105. Inorganic nanoflotillas as engineered particles for drug and gene delivery
  106. Synthesis and Characterization of Bimetallic Ni50Pt50 Catalyst Supported on SiO2 for N2O Decomposition
  107. Synthesis and Characterization of Cadmium Sulfide Nanoparticles by Chemical Precipitation Method
  108. Synthesis of CuIn1-xGaxSe2 Nanoparticles by Thermal Decomposition Method with Tunable Ga Content
  109. Role of Schottky barrier height at source/drain contact for electrical improvement in high carrier concentration amorphous InGaZnO thin film transistors
  110. Low Wavenumber Raman Modes and Plasmon Resonance in Cd Nanoparticles Obtained in Extract of Opuntia Ficus-Indica Plant
  111. Structural, morphological and optical properties of sol-gel prepared Cu doped BiVO4 powders
  112. Light trapping by hydrothermally deposited zinc oxide nanostructures with high haze ratio
  113. Electrochemical growth and characterization of iron doped cadmium sulfide thin films
  114. Influence of working pressure on the structural, optical and electrical properties of sputter deposited AZO thin films
  115. Improvement of data retention characteristics of OSOSO multi-stacked MIS capacitor for flat panel display technology
  116. Effect of sodium doping on graded Cu(In1−xGax)Se2 thin films prepared by chemical spray pyrolysis
  117. Uniform 3D hydrothermally deposited zinc oxide nanorods with high haze ratio
  118. Parametric optimization of mechanochemical process for synthesis of Cu(In, Ga) 0.5 Se 2 nanoparticles
  119. Aging effects on the stability of nitrogen-doped and un-doped InGaZnO thin-film transistors
  120. Editorial
  121. Light scattering effect of ITO:Zr/AZO films deposited on periodic textured glass surface morphologies for silicon thin film solar cells
  122. SF6/Ar plasma textured periodic glass surface morphologies with high transmittance and haze ratio of ITO:Zr films for amorphous silicon thin film solar cells
  123. Structural properties of In2Se3 precursor layers deposited by spray pyrolysis and physical vapor deposition for CuInSe2 thin-film solar cell applications
  124. Deposition and characterization of graded Cu(In1-xGax)Se2 thin films by spray pyrolysis
  125. Synthesis of ZnO nanorods using different precursor solutions and their two terminal device characterization
  126. Structural, electronic and optical features of molybdenum-doped bismuth vanadium oxide
  127. Effects of interface trap density on the electrical performance of amorphous InSnZnO thin-film transistor
  128. Boosting the mobility and bias stability of oxide-based thin-film transistors with ultra-thin nanocrystalline InSnO:Zr layer
  129. Cobalt ferrite nanowhiskers as T2 MRI contrast agent
  130. Structural and optical characterization of ball-milled copper-doped bismuth vanadium oxide (BiVO4)
  131. Solution-based synthesis of high yield CZTS (Cu 2 ZnSnS 4 ) spherical quantum dots
  132. Structural Properties of Ultrasonically Sprayed Al-Doped ZnO (AZO) Thin Films: Effect of ZnO Buffer Layer on AZO
  133. Study of Low Resistivity and High Work Function ITO Films Prepared by Oxygen Flow Rates and N2O Plasma Treatment for Amorphous/Crystalline Silicon Heterojunction Solar Cells
  134. Effect of nitrate concentration on the electrochemical growth and properties of ZnO nanostructures
  135. One-dimensional ordered growth of magneto-crystalline and biocompatible cobalt ferrite nano-needles
  136. Structural studies of BaTiO3:Er3+ and BaTiO3:Yb3+ powders synthesized by hydrothermal method
  137. Scanning fluorescence-based ultrasensitive detection of dengue viral DNA on ZnO thin films
  138. Atomic Structure Characterization of Au–Pd Bimetallic Nanoparticles by Aberration-Corrected Scanning Transmission Electron Microscopy
  139. Synthesis and optical properties of BaTiO3:Eu3+@SiO2 glass ceramic nano particles
  140. Effect of milling time on mechanically alloyed Cu(In, Ga)Se2 nanoparticles
  141. Structural and optical properties of molybdenum doped bismuth vanadate powders
  142. Oxidation of In2Se3 precursor films and its effects on preparation of CuInSe2 based thin film solar cells
  143. Highly transparent RF magnetron-sputtered indium tin oxide films for a-Si:H/c-Si heterojunction solar cells amorphous/crystalline silicon
  144. PLASMON RESONANCE AND RAMAN MODES IN Pb NANOPARTICLES OBTAINED IN EXTRACT OF OPUNTIA FICUS-INDICA PLANT
  145. Mathematical Modeling and Optimization of Mechanical Properties of Short Coir Fiber-Reinforced Vinyl Ester Composite Using Genetic Algorithm Method
  146. Lu2O3:Eu3+ glass ceramic films: Synthesis, structural and spectroscopic studies
  147. Effect of Al concentrations on the electrodeposition and properties of transparent Al-doped ZnO thin films
  148. Dielectric behavior, conduction and EPR active centres in BiVO4 nanoparticles
  149. Mechanical and machinability behaviors of woven coir fiber-reinforced polyester composite
  150. Synthesis and Characterization of Zinc Oxide Nanowires Grown Hydrothermally on Glass Substrate
  151. Optimization of mechanical properties of non-woven short sisal fibre-reinforced vinyl ester composite using factorial design and GA method
  152. Regression modelling and optimisation of cutting parameters through Nelder-Mead simplex search and CCFD during drilling of sisal-glass/vinyl ester composites
  153. Symposium on advances in semiconducting materials: XX International Materials Research Congress, Cancun, Mexico
  154. Structural and optical characterization of mechanochemically synthesized copper doped CdS nanopowders
  155. Effect of the Milling Time of the Precursors on the Physical Properties of Sprayed Aluminum-Doped Zinc Oxide (ZnO:Al) Thin Films
  156. Mechanochemical synthesis of nanostructured BiVO4 and investigations of related features
  157. Synthesis of Aluminum-doped Zinc Oxide Nanowires Hydrothermally Grown on Plastic Substrate
  158. Group III-nitrides nanostructures
  159. Symposium on Advances in Semiconducting Materials; XIX International Materials Research congress, Cancun, Mexico—August 2010
  160. Structural and dielectrical studies on mechano-chemically synthesized indium doped CdS nanopowders
  161. An (ITO or AZO)/ZnO/Cu(In1−xGax)Se2 superstrate thin film solar cell structure prepared by spray pyrolysis
  162. Preparation, deposition of Cu(In1−xGax)Se2 nanopowder thin films by non-vacuum processes and its characterization
  163. CO adsorption in PdxCoyXz (X = Au, Mo, Ni) tertiary alloy nanocatalysts for PEM fuel cells-a theoretical analysis
  164. Size modulation of nanocrystalline silicon embedded in amorphous silicon oxide by Cat-CVD
  165. Effect of milling time and heat treatment on the composition of CuIn0.75Ga0.25Se2 nanoparticle precursors and films
  166. Electrical and optical properties of ultrasonically sprayed Al-doped zinc oxide thin films
  167. AC and dielectric properties of vacuum evaporated InTe bilayer thin films
  168. An investigation on silar Cu(In1−xAlx)Se2 thin films
  169. Experimental and theoretical investigations of structural and optical properties of CIGS thin films
  170. Preparation and characterization of MnSe thin films
  171. Electrodeposition and characterization of Fe doped CdSe thin films from aqueous solution
  172. Electrochemical deposition and studies on CdCr2S4 thin films
  173. XVIII International Materials Research Congress: Symposium on Advances in Semiconducting Materials—Cancun, August 2009
  174. Structural studies of mechano-chemically synthesized CuIn1−xGaxSe2 nanoparticles
  175. Fluorine doped zinc oxide thin films deposited by chemical spray, starting from zinc pentanedionate and hydrofluoric acid: Effect of the aging time of the solution
  176. Band structure calculations of Cu(In1−xGax)Se2
  177. Electrosynthesis and studies on Cadmium-Indium-Selenide thin films
  178. Electrosynthesis and studies on Cadmium-Iron-Sulphide thin films
  179. Structural, photoluminescence and electrical properties of MW-CBD CdZnS thin films
  180. Properties of CuInGaSe thin films prepared by chemical spray pyrolysis
  181. Symposium on advances in semiconducting materials
  182. Characterization on pulsed laser deposited nanocrystalline ZnO thin films
  183. Characterization of Zinc-phthalocyanine–CdS composite thin films for photovoltaic applications
  184. Fabrication and characterization of n-CdSe0.7Te0.3/p-CdSe0.15Te0.85 solar cell
  185. Structure and temperature dependence of conduction mechanisms in hot wall deposited CuInSe2 thin films and effect of back contact layer in CuInSe2 based solar cells
  186. Synthesis and Characterization of NiCr Self-Assembled Nanorings
  187. Proposal of a hybrid CHP system: SOFC/microturbine/absorption chiller
  188. Properties of Mechanochemically Synthesized ZnS Nanoparticles
  189. Deposition and characterization of ZnO:Al thin films by ultrasonic spray pyrolysis
  190. Effect of thickness on the structural, optical and electrical properties of MW-CBD CdZnS thin films
  191. Deposition of nanocrystalline-silicon by Cat-CVD method and its characterization
  192. Structural and Optical Studies of Hot Wall Vacuum Evaporated CdTeSn Thin Films
  193. Microstructural Characterization of Electro-Deposited CdSe Thin Films
  194. Effect of pH on Composition, Structure and Magnetic Properties of Electrodeposited Co-Ni Alloys
  195. Preparation and Microstructural Studies of Electrodeposited FeSe Thin Films
  196. Electrochemical Deposition and Characterization of Cd-Fe-Se Thin Films
  197. Mechano-chemical Synthesis, Deposition and Structural Characterization of CIGS
  198. Monoclonal Antibodies against the Fusion Peptide of Hemagglutinin Protect Mice from Lethal Influenza A Virus H5N1 Infection
  199. Catalytic Properties of Pd70Co20Mo10 and a Comparison of its Experimental and Theoretical Structure
  200. Band structure and Optical properties CdTe and CdSn[sub 3]Te[sub 4] thin films
  201. Effect of rapid thermal annealing on the properties of PECVD SiNx thin films
  202. Electrical conduction in zinc phosphide thin films
  203. Characterization of Bismuth Telluride thin films — Flash evaporation method
  204. Space charge limited current conduction in Bi2Te3 thin films
  205. Characterization of vacuum-evaporated ZnSe thin films
  206. TiO2 thin film gas sensor for monitoring ammonia
  207. Electrodeposition and characterization of HgSe thin films
  208. Electrochemical deposition and characterization of Ni–P alloy thin films
  209. Influence of annealing on structural and optical properties of Zn3P2 thin films
  210. Spectroscopic ellipsometry (SE) studies on vacuum-evaporated ZnSe thin films
  211. Electrosynthesis and characterization of lead oxide thin films
  212. XIV International Materials Research Congress: Symposium 7, Materials Characterization — Cancun, August 2005
  213. Structural and photoelectrical characterization of hot wall deposited CuInSe2 thin films and the fabrication of CuInSe2 based solar cells
  214. Structural studies on vacuum evaporated ZnSe/p-Si Schottky diodes
  215. Structural and optical characterization of CuInSe2 films deposited by hot wall vacuum evaporation method
  216. Photoluminescence and persistent photoconductivity of AlxGa1-xN/GaN heterostructures
  217. Electrochemical synthesis and characterization of zinc selenide thin films
  218. Dielectric properties of vacuum deposited Bi2Te3 thin films
  219. Structural and annealing studies of potentiostatically deposited Cu2O thin films
  220. Structural, optical and Raman scattering studies on DC magnetron sputtered titanium dioxide thin films
  221. Characterization of electrodeposited Zn1−xHgxSe thin films
  222. Structural and electrochemical characterization of sputter-deposited nitrided NiCr alloys
  223. Preface
  224. Experimental and theoretical analysis of electropolymerized PMeT thin films
  225. Influence of surface phenomena in oxidative desulfurization with WOx/ZrO2 catalysts
  226. Theoretical and Experimental analysis of ZnPc for its local ordering and electronic structure
  227. Formation of ZnS nanorods by simple evaporation technique
  228. Structural analysis of cobalt titanate nanoparticles obtained by sol?gel process
  229. Dielectric and conduction studies on hot-wall deposited CdSe films
  230. Electrical resistivity of thermally evaporated bismuth telluride thin films
  231. Characterization of zinc phthalocyanine (ZnPc) for photovoltaic applications
  232. Structural and optical properties of hot wall deposited CdSe thin films
  233. Structural and optical characterization of hot wall deposited CdSexTe1−x films
  234. Development of CdTe thin films on flexible substrates—a review
  235. Structural characterization of hot wall deposited cadmium selenide thin films