All Stories

  1. Adjusting the local coordination microenvironment of single atoms to optimize catalytic efficiency in renewable energy devices
  2. Redox-Mediated Ce-to-Fe Electronic Regulation of Atomically Dispersed Fe Sites for Bifunctional Water Splitting
  3. Revolutionizing red micro-LEDs: Harnessing surface plasmons for enhanced efficiency
  4. Introducing Cu2O (111) phase on Cu(OH)2 nanorods integrated Pd-cocatalyst for boosting acetone selectivity via photoelectrochemical CO2RR
  5. Integration of InGaN/GaN Microrod Light Emitting Diodes on Flexible and Peelable Substrate via Dielectrophoretic Alignments
  6. Exploring the Influence of Localized Surface Plasmon and Sol–Gel Passivation on Blue InGaN/GaN Micro/Nano Light Emitting Diodes
  7. Sputtering induced the architecture of “needle mushroom” shaped Cu2O–NiCo2O4 heterostructure with novel morphology and abundant interface for high-efficiency electrochemical water oxidation
  8. Enhanced horizontal alignment of InGaN/GaN nanorod LEDs via insulator-based dielectrophoresis
  9. Fabrication of Vertically Aligned InGaN/GaN Nanorod Light Emitting Diode Arrays Using Dielectrophoresis
  10. Designing a Novel C3‐Fe‐N Interface Local Coordination Microenvironment for Efficient Electrocatalytic Water Splitting
  11. Enhanced quantum efficiency of horizontally aligned individual InGaN/GaN nanorod LEDs by self-assembled Ag nanoparticles
  12. Accelerating photoelectrochemical CO2RR selectively of C2+ products by integrating Ag/Pd cocatalysts on Cu/Cu2O/CuO heterojunction nanorods
  13. LaCeOx coupled N-doped graphene/Ru single-atoms as a binary-site catalyst for efficient hydrogen evolution based on hydrogen spillover
  14. Pt Single Atoms Supported on Defect Ceria as an Active and Stable Dual-Site Catalyst for Alkaline Hydrogen Evolution
  15. Enabling Localized Surface Plasmon Emission from InGaN/GaN Nano-LEDs Integrated with Ag/SiO2 Nanoparticles
  16. Binder-free Cu/Cu2O/CuO/Pd nanorods photoelectrode for regulating the faradaic efficiency for acetaldehyde and acetate production during photoelectrochemical CO2RR by stabilizing the Cu2O phase
  17. Platinum single-atom catalysts anchored on a heterostructure cupric oxide/copper foam for accelerating photoelectrochemical hydrogen evolution reaction
  18. Investigation of non-stoichiometric delafossite photoelectrodes composed of cuprous oxide and iron oxide for enhanced water-splitting
  19. Facile synthesis of flexible and scalable Cu/Cu2O/CuO nanoleaves photoelectrodes with oxidation-induced self-initiated charge-transporting platform for photoelectrochemical water splitting enhancement
  20. Impact of porosity on the structural and optoelectronic properties of nanoporous GaN double layer fabricated via combined electrochemical and photoelectrochemical etching
  21. Impact of Porosity on the Structural and Optoelectronic Properties of Nanoporous Gan Double Layer Fabricated Via Combined Electrochemical and Photo-Electrochemical Etching
  22. Enhancement in photostability of betalain dye from basella Alba fruits using zinc oxide nanoparticles
  23. Scalable Cu/Cu2O-CuO/CuI heterojunction platform realizing an extended charge carrier separation suitable for photoreduction and photodegradation
  24. Insightful understanding of hot-carrier generation and transfer in plasmonic Au@CeO2 core–shell photocatalysts for light-driven hydrogen evolution improvement
  25. SURFACTANT-FREE SYNTHESIS OF CARBON QUANTUM DOTS ADORNED COPPER OXIDE NANOCOMPOSITES AND THEIR PHOTOCATALYTIC ACTIVITY OF COMMERCIAL DYES BENEATH SUNLIGHT AND UV LIGHT SOURCES
  26. The degradation profile of high molecular weight textile reactive dyes: A daylight induced photocatalytic activity of ZnO/carbon quantum dot photocatalyst
  27. Influence of Ga-halogen bond formation at the interface of nanoporous GaN photoelectrodes for enhanced photoelectrochemical water splitting efficiency
  28. Efficient, recyclable, and affordable daylight induced Cu/Cu2O/CuI photocatalyst via an inexpensive iodine sublimation process
  29. Impact of chloride surface treatment on nano-porous GaN structure for enhanced water-splitting efficiency
  30. Fabrication of flexible sheets of Cu/CuO/Cu2O heterojunction nanodisks: A dominant performance of multiple photocatalytic sheets under natural sunlight
  31. Developing eco-friendly nanostructured oil: Partial discharge and breakdown voltage characterization of transformer corn oil
  32. Enhanced cyclic performance initiated via an in situ transformation of Cu/CuO nanodisk to Cu/CuO/Cu2O nanosponge
  33. A Contribution to Environmentally-Compatible Energy Conversion: Characterization of Nano Structured Natural Ester Oil Decorated with Carbon Quantum Dots
  34. Pd supported N-doped CeO2 as an efficient hydrogen oxidation reaction catalyst in PEMFC
  35. Sodium hydroxide mediated alumina nanoparticles from waste aluminum foil sheets – Biological impact and photo-catalytic efficacy on commercial dyes
  36. Fabrication of ultra-sensitive piperidine chemical sensor with a direct grown well-aligned ZnO nanorods on FTO substrate as a working electrode
  37. Investigations on Novel Carbon Quantum Dots Covered Nanofluid Insulation for Medium Voltage Applications
  38. Reprecipitation induced isolation of ligand-free Cs4PbBr6 nanodisks as a green emissive UV light filter
  39. Enhanced photocurrent performance of partially decorated Au nanoparticles on ZnO nanorods based UV photodetector
  40. Synthesis of thermally stable and highly luminescent spherical shaped ligand-free Cs4PbBr6 nanospheres with a single polar solvent
  41. Role of carbon quantum dots and film thickness on enhanced UV shielding capability of flexible polymer film containing carbon quantum dots/N-doped ZnO nanoparticles
  42. Influence of Bicationic and Catanionic Surfactants Over the Morphology of Mesoporous Nanohydroxyapatite
  43. A convenient method for isolating carbon quantum dots in high yield as an alternative to the dialysis process and the fabrication of a full-band UV blocking polymer film
  44. Carbon quantum dots decorated N-doped ZnO: Synthesis and enhanced photocatalytic activity on UV, visible and daylight sources with suppressed photocorrosion
  45. Enhanced photocatalytic behaviour of synthesized nickel oxide nanoparticles on Fluorescein under different irradiations
  46. Localized surface plasmon enhanced photoluminescence of ZnO nanosheets by Au nanoparticles
  47. Surfactant-free synthesis of leaf-like hierarchical CuO nanosheets as a UV light filter
  48. Highly efficient degradation of dyes by carbon quantum dots/N-doped zinc oxide (CQD/N-ZnO) photocatalyst and its compatibility on three different commercial dyes under daylight
  49. Facile synthesis of ZnO nanoglobules and its photocatalytic activity in the degradation of methyl orange dye under UV irradiation
  50. Improved daylight-induced photocatalytic performance and suppressed photocorrosion of N-doped ZnO decorated with carbon quantum dots
  51. Carbon quantum dots decorated leaf-like CuO nanosheets and their improved dispersion for an excellent UV-shielding properties in polymer films
  52. Organic Solvent Assisted Growth of Flower-like ZnO for Enhanced Photocatalytic Activities
  53. Natural Light Source Assisted Synthesis of Self-decorated Ag/TiO2 Nanoparticles for Enhanced Photocatalytic Degradation of Fluorescein Dye
  54. Beam Divergence and Thermal Transient Characteristics of InGaN/GaN Light Emitting Diodes with Rear Side Grown ZnO Nanorods
  55. Beam Divergence and Thermal Transient Characteristics of InGaN/GaN Light Emitting Diodes with Rear Side Grown ZnO Nanorods
  56. Coalescence driven size-controlled synthesis of ITO nanospheres
  57. Impact of Nano-Texturing in GaN-based Light Emitting Diodes by Self-Assembled Silver Microspheres as Etch Mask
  58. Fabrication of ZnO Based Dye Sensitized Solar Cells
  59. Synthesis and improved luminescence properties of OLED/ZnO hybrid materials
  60. Enhancement of light output power in GaN-based light-emitting diodes using indium tin oxide films with nanoporous structures
  61. The different types of ZnO materials on the performance of dye-sensitized solar cells
  62. Enhanced light output power of GaN-based light-emitting diodes by nano-rough indium tin oxide film using ZnO nanoparticles
  63. Light Output Power Enhancement of GaN-Based Light Emitting Diodes with Periodic Deflector Embedded on the Wet Etch Patterned Sapphire Substrate
  64. Light Output Power Enhancement of GaN-Based Light Emitting Diodes with Periodic Deflector Embedded on the Wet Etch Patterned Sapphire Substrate
  65. Tuning the spectrometric properties of white light by surface plasmon effect using Ag nanoparticles in a colour converting light-emitting diode
  66. Comparison of various surface textured layer in InGaN LEDs for high light extraction efficiency
  67. Improved light extraction efficiency of GaN-based light emitting diodes using one and two interfaces of ITO/ZnO layer texturing
  68. Enhancement of Light Output Power and Modification of Beam Profile in InGaN/GaN Light Emitting Diodes with Micro Polygon Column Shaped Transparent
  69. Synthesis and characterization of porous shell-like nano hydroxyapatite using Cetrimide as template
  70. Enhanced air-cavity effect of periodically oriented embedded air protrusions for high-efficiency InGaN/GaN light-emitting diodes
  71. Impact of layer thickness and light transmission of ZnO nanomaterials on GaN-based light emitting diodes
  72. Effect of Ridge Growth on Wafer Bowing and Light Extraction Efficiency of Vertical GaN-Based Light-Emitting Diodes
  73. Enhanced light output power of GaN-based light emitting diodes with overcut sideholes formed by wet etching
  74. Nanoscale ITO/ZnO layer-texturing for high-efficiency InGaN/GaN light emitting diodes
  75. Enhancement of Light Output Power in InGaN/GaN LEDs with Nanoroughed Hemispherical Indium Tin Oxide Transparent Ohmic Contacts
  76. Enhanced Light Output Power of InGaN/GaN Light Emitting Diodes with Embedded Air Prisms
  77. Zinc oxide nanostructures derived from a simple solution method for solar cells and LEDs
  78. Impact of two-floor air prism arrays as an embedded reflector for enhancing the output power of InGaN/GaN light emitting diodes
  79. Effect of annealing temperature and pH on morphology and optical property of highly dispersible ZnO nanoparticles
  80. Improvement of Light Output Power in InGaN/GaN Light-Emitting Diodes with a Nanotextured GaN Surface Using Indium Tin Oxide Nanospheres
  81. Synthesis and characterization of nano spherical hydroxyapatite for drug delivery and tissue engineering
  82. A Catalyst-free Approach to Prepare Nano to Microstructures of GaN from a Single Molecular Complex Precursor
  83. Polymer solar cells based on inkjet-printed PEDOT:PSS layer
  84. Fabrication and electro chemical properties of poly vinyl alcohol/para toluene sulfonic acid membranes for the applications of DMFC
  85. Synthesis and optical properties of sword-like GaN nanorods clusters
  86. InGaN/GaN Light-Emitting Diodes with Overcut-Shaped Periodic Microstructures Formed by Wet Etching Process
  87. Growth, morphology and optical properties of tris(8-hydroxyquinoline)aluminum/zinc oxide hybrid nanowires
  88. The Impact of ZnO Nanoparticle Interlayer on the Growth and Morphology of Broom-Like Single Crystalline Gallium Nitride
  89. Effect of zinc oxide incorporation on the morphology of tris(8-hydroxyquinoline)aluminum/zinc oxide hybrid nanomaterials
  90. Preparation and characterization of nano-scale ZnO as a buffer layer for inkjet printing of silver cathode in polymer solar cells
  91. Hybrid fluorescent polymer–zinc oxide nanoparticles: Improved efficiency for luminescence conversion LED
  92. Preparation of exfoliated high-impact polystyrene/MMT nanocomposites via in situ polymerization under controlling viscosity of the reaction medium
  93. TiO2 thin film gas sensor for monitoring ammonia
  94. Nanocrystalline ZnO particles: Low-temperature solution approach from a single molecular precursor
  95. Yellow light-emitting polymer bearing fluorescein dye units: Photophysical property and application as luminescence converter of a hybrid LED
  96. ZnO nanoballs synthesized from a single molecular precursor via non-hydrolytic solution route without assistance of base, surfactant, and template etc
  97. Novel Fluorescent Polymer/Zinc Oxide Hybrid Particles:  Synthesis and Application as a Luminescence Converter for White Light-Emitting Diodes
  98. Novel fluorescent polymer-zinc oxide hybrids for bright and efficient white light emitting diodes
  99. Preparation and photophysical properties of organic fluorescent polymers and their nanoparticles
  100. Exfoliated high-impact polystyrene/MMT nanocomposites prepared using anchored cationic radical initiator–MMT hybrid
  101. Synthesis and characterization of polyesters containing fluorescein dye units
  102. Preparation and characterization of exfoliated polystyrene/clay nanocomposites using a cationic radical initiator-MMT hybrid
  103. Preparation of polystyrene/montmorillonite nanocomposites using a new radical initiator-montmorillonite hybrid via in situ intercalative polymerization
  104. Preparation and characterization of new difunctional cationic radical initiator-montmorillonite hybrids