All Stories

  1. Effect of hydrophilic and hydrophobic treatments on bloodstain patterns of drip stains on knitted cotton and polyester fabrics
  2. Wicking in textiles at rates comparable to human sweating
  3. New wicking measurement system to mimic human sweating phenomena with continuous microfluidic flow
  4. Near room temperature dyeing of m‐aramid fabrics
  5. Equilibrium clamshell drops on conical surfaces: effect of curvature and gravity
  6. Print clarity on digitally printed textiles – a quantitative evaluation
  7. Impact Spatter Bloodstain Patterns on Textiles
  8. Profile of capillary bridges between two vertically stacked cylindrical fibers under gravitational effect
  9. Effect of yarn structure on wicking and its impact on bloodstain pattern analysis (BPA) on woven cotton fabrics
  10. Geometric impact of void space in woven fabrics on oil resistance or repellency
  11. Synthesis of Antifungal Agents from Xanthene and Thiazine Dyes and Analysis of Their Effects
  12. Alternative method for determining the original drop volume of bloodstains on knit fabrics
  13. Integration of yarn compression in modeling structural geometry of liquid resistant–repellent fabric surfaces and its impact on liquid behavior
  14. Impact dynamics of porcine drip bloodstains on fabrics
  15. Effect of fabric mounting method and backing material on bloodstain patterns of drip stains on textiles
  16. Photodynamic activity of nanostructured fabrics grafted with xanthene and thiazine dyes against opportunistic fungi
  17. Functional dye as a comonomer in a water-soluble polymer
  18. Photodynamic antifungal activities of nanostructured fabrics grafted with rose bengal and phloxine B againstAspergillus fumigatus
  19. Symmetric and Asymmetric Capillary Bridges between a Rough Surface and a Parallel Surface
  20. Improving water solubility of poly(acrylic acid-co-styrene) copolymers by adding styrene sulfonic acid as a termonomer
  21. Hemp-fiber based nonwoven composites: Effects of alkalization on sound absorption performance
  22. Multi-fiber needle-punched nonwoven composites: Effects of heat treatment on sound absorption performance
  23. Profiles of Liquid Drops at the Bottom of Cylindrical Fibers Standing on Flat Substrates
  24. Gibbs Free Energy of Liquid Drops on Conical Fibers
  25. Comparison of three methods for generating superhydrophobic, superoleophobic nylon nonwoven surfaces
  26. Effects of material and treatment parameters on noise-control performance of compressed three-layered multifiber needle-punched nonwovens
  27. Effects of porosity, fiber size, and layering sequence on sound absorption performance of needle-punched nonwovens
  28. Profiles of Liquid Drops at the Tips of Cylindrical Fibers
  29. Thermal bonding of nonwovens as simulated by polypropylene films: Effect of time, temperature, and molecular weight
  30. Melt-blowing thermoplastic polyurethane and polyether-block-amide elastomers: Effect of processing conditions and crystallization on web properties
  31. Crystallization behavior of elastomeric block copolymers: Thermoplastic polyurethane and polyether-block-amide
  32. Textile Nanotechnologies
  33. Design of a Superhydrophobic Surface Using Woven Structures
  34. Mechanical behavior of nylon 66 fibers under monotonic and cyclic loading
  35. Lotus effect: Superhydrophobicity
  36. Preparation of a superhydrophobic rough surface
  37. Review of thermally point-bonded nonwovens: Materials, processes, and properties
  38. Novel synthesis of N-substituted polyacrylamides: Derivatization of poly(acrylic acid) with amines using a triazine-based condensing reagent
  39. Orientation Distribution Functions Obtained via Polarized Raman Spectroscopy of Poly(ethylene terephthalate) Fibers
  40. Porphyrin-based, light-activated antimicrobial materials
  41. Analysis of the 1030-cm?1 band of poly(ethylene terephthalate) fibers using polarized raman microscopy
  42. Grafting of light-activated antimicrobial materials to nylon films
  43. Determination of the Orientation Parameters and the Raman Tensor of the 998 cm -1 Band of Poly(ethylene terephthalate)
  44. Determining Diffusion and Convective Mass Transfer Coefficients in Dyeing a Thin Flat Film
  45. Method for grafting poly(acrylic acid) onto nylon 6,6 using amine end groups on nylon surface
  46. Aberrations in confocal spectroscopy of polymeric materials: Erroneous thicknesses and intensities, and loss of resolution
  47. Use of a Laser Scanning Confocal Microscope to Obtain Concentration Profiles of a Diffusant in a Polymer Film
  48. Determination of density and birefringence of poly(ethylene terephthalate) fibers using Raman microscopy
  49. Isotactic polypropylene morphology-Raman spectra correlations
  50. Aberrations in confocal spectroscopy of polymeric materials: Erroneous thicknesses and intensities, and loss of resolution
  51. Determination of density and birefringence of poly(ethylene terephthalate) fibers using Raman microscopy
  52. Determination of density and birefringence of poly(ethylene terephthalate) fibers using Raman microscopy
  53. The effect of grafted polymeric lubricant molecular weight on the frictional characteristics of nylon 6,6 fibers
  54. Development of In Vitro Performance Tests and Evaluation of Nonabsorbable Monofilament Sutures for Cardiovascular Surgery
  55. Advances in the design of a thermomechanical analyzer for fibers. I. Instrumental features
  56. Effect of moisture and orientation on the fracture of nylon 6,6 fibers
  57. The fracture toughness of single nylon 6,6 fibres
  58. Solution dimensions of the gramicidin dimer by dynamic light scattering
  59. Rotational analysis of bands at the long-wavelength end of the electronic transition of ClO2
  60. A study of the rotational state dependence of predissociation of a polyatomic molecule: The case of ClO2