Contact

All Stories

  1. Effects of Hold Time on the Elevated Temperature Fatigue Crack Growth Behavior of Alloy 247LC‐DS

    Article • Fatigue & Fracture of Engineering Materials & Structures, February 2026, Wiley

    Dr Richard W Neu

  2. Competing roles of porosity and crystallographic microstructure in the HCF behavior of AM IN718

    Article • January 2026, Elsevier

    Dr Richard W Neu

  3. AI Safety for Physical Infrastructures: A Collaborative and Interdisciplinary Approach

    Article • Fatigue & Fracture of Engineering Materials & Structures, January 2025, Wiley

    Dr Richard W Neu

  4. Creep crack growth in alloy 247LC‐DS

    Article • Fatigue & Fracture of Engineering Materials & Structures, July 2024, Wiley

    Dr Richard W Neu

  5. Time‐ and cycle‐dependent growth of surface cracks in alloy 718

    Article • Fatigue & Fracture of Engineering Materials & Structures, January 2024, Wiley

    Dr Richard W Neu

  6. Temperature-frequency wear mechanism maps for a heat-resistant austenitic stainless steel

    Article • Wear, June 2023, Elsevier

    Dr Richard W Neu

  7. Evolution of Creep Deformation near Tips of Sharp Notches and Cracks in CM247LC-DS Ni-Base Superalloy

    Article • May 2023, ASTM International

    Dr Richard W Neu

  8. Understanding the role of glaze layer with aligned images from multiple surface characterization techniques

    Article • Wear, July 2021, Elsevier

    Dr Richard W Neu

  9. Transition modelling of surface flaws to through cracks

    Article • Fatigue & Fracture of Engineering Materials & Structures, January 2020, Wiley

    Dr Richard W Neu

  10. Stress-strain measurement by indentation with a spherical tip

    Article • Materials Performance and Characterization, January 2020, ASTM International

    Dr Richard W Neu

  11. Creep‐fatigue behaviour of single‐crystal Ni‐base superalloy CMSX‐8

    Article • Fatigue & Fracture of Engineering Materials & Structures, July 2019, Wiley

    Dr Richard W Neu

  12. Editorial: Special issue for celebrating the 40th anniversary of FFEMS

    Article • Fatigue & Fracture of Engineering Materials & Structures, July 2019, Wiley

    Dr Richard W Neu

  13. Crack paths in single-crystal Ni-base superalloys under isothermal and thermomechanical fatigue

    Article • International Journal of Fatigue, June 2019, Elsevier

    Dr Richard W Neu

  14. Quantitative prediction of the aged state of Ni-base superalloys using PCA and tensor regression

    Article • Acta Materialia, February 2019, Elsevier

    Dr Richard W Neu

  15. Crystal Viscoplasticity Model of Molybdenum Including the Influence of Silicon in Solid Solution

    Article • Materials Performance and Characterization, January 2019, ASTM International

    Dr Richard W Neu

  16. Fretting wear comparison of cladding materials for reactor fuel cladding application

    Article • Journal of Nuclear Materials, September 2018, Elsevier

    Dr Richard W Neu

  17. Microstructure-sensitive fatigue modelling of medical-grade fine wire

    Article • Fatigue & Fracture of Engineering Materials & Structures, June 2018, Wiley

    Dr Richard W Neu

  18. Microstructure-sensitive Crystal Viscoplasticity for Ni-base Superalloys Targeting Long-term Creep-Fatigue Interaction Modeling

    Article • May 2018, Office of Scientific and Technical Information (OSTI)

    Dr Richard W Neu

  19. Crystal viscoplasticity model for the creep-fatigue interactions in single-crystal Ni-base superalloy CMSX-8

    Article • International Journal of Plasticity, January 2018, Elsevier

    Dr Richard W Neu

  20. Impact of compressive hold on out-of-phase thermomechanical fatigue crack growth in IN 718

    Article • Fatigue & Fracture of Engineering Materials & Structures, February 2017, Wiley

    Dr Richard W Neu

  21. Efficient Methodologies for Determining Temperature-Dependent Parameters of a Ni-Base Superalloy Crystal Viscoplasticity Model for Cyclic Loadings

    Article • Journal of Engineering Materials and Technology, July 2014, ASME International

    Dr Richard W Neu

  22. Coupled thermomechanical high cycle fatigue in a single crystal Ni-base superalloy

    Article • International Journal of Fatigue, May 2014, Elsevier

    Professor Stephen D Antolovich, Dr Richard W Neu

  23. Influence of notch severity on thermomechanical fatigue life of a directionally solidified Ni-base superalloy

    Article • Fatigue & Fracture of Engineering Materials & Structures, March 2014, Wiley

    Dr Richard W Neu

  24. Influence of Extremum Temperatures on TMF of a Ni-Base Superalloy

    Article • Advanced Materials Research, March 2014, Trans Tech Publications

    Dr Richard W Neu

  25. Influence of Control Mode on Thermomechanical Fatigue Testing of Circumferentially-Notched Specimens

    Article • Materials Performance and Characterization, January 2014, ASTM International

    Dr Richard W Neu

  26. Reduced-Order Constitutive Modeling of Directionally Solidified Ni-Base Superalloys

    Article • Journal of Engineering Materials and Technology, January 2014, ASME International

    Dr Richard W Neu

  27. Influence of temperature on the fretting response between AISI 301 stainless steel and AISI 52100 steel

    Article • Tribology International, December 2013, Elsevier

    Dr Richard W Neu

  28. Performance and Characterization of TWIP Steels for Automotive Applications

    Article • Materials Performance and Characterization, August 2013, ASTM International

    Dr Richard W Neu

  29. Materials Selection Exercise for Electromagnetic Launcher Rails

    Article • IEEE Transactions on Magnetics, August 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Richard W Neu

  30. A simple model for friction evolution infretting

    Article • Wear, April 2013, Elsevier

    Dr Richard W Neu

  31. A hybrid crystal plasticity and phase transformation model for high carbon steel

    Article • Computational Mechanics, November 2012, Springer Science + Business Media

    Dr Richard W Neu

  32. Physics-Based Modeling of Thermo-Mechanical Fatigue in PWA 1484

    Article • October 2012, Wiley

    Professor Stephen D Antolovich, Dr Richard W Neu

  33. Thermomechanical fatigue and bithermal–thermomechanical fatigue of a nickel-base single crystal superalloy

    Article • International Journal of Fatigue, September 2012, Elsevier

    Professor Stephen D Antolovich, Dr Richard W Neu

  34. A survey of railgun research at the Georgia Institute of Technology (USA)

    Article • May 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Richard W Neu

  35. Mechanism-based life model for out-of-phase thermomechanical fatigue in single crystal Ni-base superalloys

    Article • Fatigue & Fracture of Engineering Materials & Structures, March 2012, Wiley

    Professor Stephen D Antolovich, Dr Richard W Neu

  36. Fretting damage in thin sheets: Analysis of an experimental configuration

    Article • Tribology International, October 2011, Elsevier

    Dr Richard W Neu

  37. Progress in standardization of fretting fatigue terminology and testing

    Article • Tribology International, October 2011, Elsevier

    Dr Richard W Neu

  38. An anisotropic tertiary creep damage constitutive model for anisotropic materials

    Article • International Journal of Pressure Vessels and Piping, August 2011, Elsevier

    Dr Richard W Neu

  39. An Improved Anisotropic Tertiary Creep Damage Formulation

    Article • Journal of Pressure Vessel Technology, July 2011, ASME International

    Dr Richard W Neu

  40. Fatigue Life Modeling of Anisotropic Materials Using a Multiaxial Notch Analysis

    Article • Journal of Engineering Materials and Technology, June 2011, ASME International

    Dr Richard W Neu

  41. On the Development of Physically Based Life Prediction Models in the Thermo Mechanical Fatigue of Ni-Base Superalloys

    Article • Key Engineering Materials, January 2011, Trans Tech Publications

    Professor Stephen D Antolovich, Dr Richard W Neu

  42. Modeling Creep-Fatigue Deformation of Ni-Base Superalloys Using Crystal Viscoplasticity

    Article • Journal of ASTM International, January 2011, ASTM International

    Dr Richard W Neu

  43. Creep fatigue of a directionally solidified Ni-base superalloy - smooth and cylindrically notched specimens

    Article • Fatigue & Fracture of Engineering Materials & Structures, December 2010, Wiley

    Dr Richard W Neu

  44. Thermomechanical fatigue of a directionally-solidified Ni-base superalloy: Smooth and cylindrically-notched specimens

    Article • International Journal of Fatigue, August 2010, Elsevier

    Dr Richard W Neu

  45. Microstructure-sensitive modeling of rolling contact fatigue

    Article • International Journal of Fatigue, May 2010, Elsevier

    Dr Richard W Neu

  46. On thermo-mechanical fatigue in single crystal Ni-base superalloys

    Article • Procedia Engineering, April 2010, Elsevier

    Professor Stephen D Antolovich, Dr Richard W Neu

  47. Influence of minimum temperature on the thermomechanical fatigue of a directionally-solidified Ni-base superalloy

    Article • Procedia Engineering, April 2010, Elsevier

    Dr Richard W Neu

  48. Modeling the Influence of Microstructure in Rolling Contact Fatigue

    Article • Journal of ASTM International, January 2010, ASTM International

    Dr Richard W Neu

  49. Microstructure sensitivity of fretting fatigue based on computational crystal plasticity

    Article • Tribology International, September 2009, Elsevier

    Dr Richard W Neu

  50. Microstructure-sensitive modeling: Application to fretting contacts

    Article • International Journal of Fatigue, August 2009, Elsevier

    Dr Richard W Neu

  51. Fretting on the cubic face of a single-crystal Ni-base superalloy at room temperature

    Article • Tribology International, June 2009, Elsevier

    Dr Richard W Neu

  52. Effect of pre-exposure on crack initiation life of a directionally solidified Ni-base superalloy

    Article • International Journal of Fatigue, February 2009, Elsevier

    Dr Richard W Neu

  53. Thermomechanical Fatigue of a Directionally-Solidified Ni-Base Superalloy in the Presence of Stress Concentrations

    Article • January 2009, ASME International

    Dr Richard W Neu

  54. High-load fretting of Ti–6Al–4V interfaces in point contact

    Article • Wear, September 2008, Elsevier

    Dr Richard W Neu

  55. Fretting behaviour of AISI 301 stainless steel sheet in full hard condition in contact with AISI 52100 steel

    Article • Tribology - Materials Surfaces & Interfaces, March 2008, Taylor & Francis

    Dr Richard W Neu

  56. Crystal plasticity simulations of fretting of Ti-6Al-4V in partial slip regime considering effects of texture

    Article • Computational Materials Science, January 2008, Elsevier

    Dr Richard W Neu

  57. A comparative study of the fretting fatigue behavior of 4340 steel and PH 13-8 Mo stainless steel

    Article • International Journal of Fatigue, December 2007, Elsevier

    Dr Richard W Neu

  58. Initiation and Propagation of Stress-Assisted Corrosion (SAC) Cracks in Carbon Steel Boiler Tubes

    Article • Journal of Engineering Materials and Technology, July 2007, ASME International

    Dr Richard W Neu

  59. Subsurface damage development during fretting fatigue of high strength steel

    Article • Tribology International, July 2007, Elsevier

    Dr Richard W Neu

  60. Corrosion kinetics of a directionally solidified Ni-base superalloy

    Article • Acta Materialia, June 2007, Elsevier

    Dr Richard W Neu

  61. Influence of Crystallographic Orientation on Energy Dissipation During Sliding

    Article • January 2007, ASME International

    Dr Richard W Neu

  62. Transversely isotropic viscoplasticity model for a directionally solidified Ni-base superalloy

    Article • International Journal of Plasticity, December 2006, Elsevier

    Dr Richard W Neu

  63. Fretting damage assessment of titanium alloys using orientation imaging microscopy

    Article • Tribology International, October 2006, Elsevier

    Dr Richard W Neu

  64. Mechanical behavior of nylon 66 fibers under monotonic and cyclic loading

    Article • Composites Science and Technology, September 2006, Elsevier

    Dr Richard W Neu, Dr Stephen Michielsen

  65. Influence of Microstructure in Partial-Slip Fretting Contacts Based Upon Two-Dimensional Crystal Plasticity Simulations

    Article • Journal of Tribology, June 2006, ASME International

    Dr Richard W Neu

  66. Plasticity in polycrystalline fretting fatigue contacts

    Article • Journal of the Mechanics and Physics of Solids, February 2006, Elsevier

    Dr Richard W Neu

  67. Effect of mean stress on fretting fatigue of Ti-6Al-4V on Ti-6Al-4V

    Article • Fatigue & Fracture of Engineering Materials & Structures, January 2006, Wiley

    Dr Richard W Neu

  68. Effect of stress and strain state on heterogeneous coarsening in Sn–Pb solder

    Article • Acta Materialia, January 2006, Elsevier

    Dr Richard W Neu

  69. Thermomechanical Fatigue Behavior of a Directionally Solidified Ni-Base Superalloy

    Article • Journal of Engineering Materials and Technology, February 2005, ASME International

    Dr Richard W Neu

  70. Microstructural Characterization of Ti-6Al-4V Subjected to Fretting

    Article • Journal of Tribology, October 2004, ASME International

    Dr Richard W Neu

  71. Crystallographic plasticity in fretting of Ti–6AL–4V

    Article • International Journal of Plasticity, October 2003, Elsevier

    Dr Richard W Neu

  72. Characteristics of plastic deformation field in polycrystalline fretting contacts

    Article • International Journal of Fatigue, September 2003, Elsevier

    Dr Richard W Neu

  73. Fretting fatigue crack nucleation in Ti-6Al-4V

    Article • Fatigue & Fracture of Engineering Materials & Structures, March 2003, Wiley

    Dr Richard W Neu

  74. The influence of prior strain rate on stress relaxation in solder alloys

    Article • Materials Science and Engineering A, January 2002, Elsevier

    Dr Richard W Neu

  75. Influence of coefficient of friction on fretting fatigue crack nucleation prediction

    Article • Tribology International, July 2001, Elsevier

    Dr Richard W Neu

  76. Thermomechanical Behavior of 96Sn-4Ag and Castin Alloy

    Article • Journal of Electronic Packaging, December 2000, ASME International

    Dr Richard W Neu

  77. Measurement and modeling of back stress at intermediate to high homologous temperatures

    Article • International Journal of Plasticity, January 2000, Elsevier

    Dr Richard W Neu

  78. Cyclic behavior of unidirectional and cross-ply titanium matrix composites

    Article • International Journal of Plasticity, January 1996, Elsevier

    Dr Richard W Neu

  79. Low-temperature creep of a carburized steel

    Article • Metallurgical Transactions A, September 1992, Springer Science + Business Media

    Dr Richard W Neu

  80. Transformation of retained austenite in carburized 4320 steel

    Article • Metallurgical Transactions A, July 1991, Springer Science + Business Media

    Dr Richard W Neu

  81. Thermomechanical fatigue, oxidation, and Creep: Part II. Life prediction

    Article • Metallurgical Transactions A, September 1989, Springer Science + Business Media

    Dr Richard W Neu

  82. Thermomechanical fatigue, oxidation, and creep: Part i. Damage mechanisms

    Article • Metallurgical Transactions A, September 1989, Springer Science + Business Media

    Dr Richard W Neu