All Stories

  1. Characterization of TiCrMoZr (Nb/Mn) Complex Concentrated Alloys Synthesized by Vacuum Arc Melting

    Article • International Journal of Metalcasting, November 2025, Springer Science + Business Media

    Shimaa El-Hadad

  2. Studying Pearlite Fragmentation and Mechanical Properties of ECAPed Low-Carbon Steel Using the Abbott Firestone Technique

    Article • Metallography Microstructure and Analysis, August 2025, Springer Science + Business Media

    Shimaa El-Hadad

  3. The Influence of Rare Earth Metals on the Microstructure and Mechanical Properties of 220 and 356.1 Alloys for Automotive Industry

    Article • Materials, February 2025, MDPI AG

    Shimaa El-Hadad

  4. Influence of Alloying with Tantalum on the Mechanical Properties and Corrosion Behavior of Ti-6Al-7Nb-xTa Cast Alloys

    Article • International Journal of Metalcasting, December 2024, Springer Science + Business Media

    Shimaa El-Hadad

  5. Investigating the Influence of Li and Sc Addition on the Microstructure and Electrochemical Properties of 7075 Aluminum-Based Alloys

    Article • Journal of Materials Engineering and Performance, December 2024, Springer Science + Business Media

    Shimaa El-Hadad

  6. COMPREHENSIVE INVESTIGATION OF Si ADDITIONS AND NANOCOMPOSITE INHIBITORS ON MICROSTRUCTURE/CORROSION PERFORMANCE OF CAST AX53 ALLOY IN 3.5% NaCl SOLUTION

    Article • Surface Review and Letters, October 2024, World Scientific Pub Co Pte Lt

    Shimaa El-Hadad

  7. Failure analysis of a boiler stack in a refinery industry

    Article • Corrosion Engineering Science and Technology The International Journal of Corrosion Processes and Corrosion Control, August 2024, SAGE Publications

    Shimaa El-Hadad

  8. Development of Cast AZ63 Magnesium Alloys for Cathodic Protection Applications via Alloying Additives

    Article • Transactions of the Indian Institute of Metals, August 2024, Springer Science + Business Media

    Shimaa El-Hadad

  9. Experimental Investigation on Machinability of α/β Titanium Alloys with Different Microstructures

    Article • Materials, November 2023, MDPI AG

    Shimaa El-Hadad

  10. Solidification Processing of Al-Ce Alloys for High-Temperature Applications

    Article • September 2023, MDPI AG

    Shimaa El-Hadad

  11. Study of Microstructure and Corrosion Behavior of Cast Zn–Al–Mg Alloys

    Article • International Journal of Metalcasting, January 2023, Springer Science + Business Media

    Shimaa El-Hadad

  12. Influence of Microstructure and Alloy Composition on the Machinability of α/β Titanium Alloys

    Article • Materials, January 2023, MDPI AG

    Shimaa El-Hadad

  13. In-vitro biocompatibility evaluation of cast Ni–Ti alloy produced by vacuum arc melting technique for biomedical and dental applications

    Article • Chemical Papers, October 2022, Springer Science + Business Media

    Shimaa El-Hadad

  14. Effect of Bi and Ca on the Solidification Parameters of Sr-Modified Al-S-Cu (Mg) Alloys

    Article • Materials, October 2022, MDPI AG

    Shimaa El-Hadad

  15. Influence of Al11Ce3 Size and Distribution on the Electrochemical Properties of Sonoprocessed Al-10 wt.% Ce Alloy

    Article • International Journal of Metalcasting, September 2022, Springer Science + Business Media

    Shimaa El-Hadad

  16. Effect of Ti Addition and Heat Treatment on Electrochemical Properties of Cast Fe35Mn31Ni18Al13Tix HEAs

    Article • International Journal of Metalcasting, June 2022, Springer Science + Business Media

    Shimaa El-Hadad

  17. Investigating the thermal oxidation behavior of Ti–6Al–7Nb alloy in dry air

    Article • Werkstoffe und Korrosion, May 2022, Wiley

    Shimaa El-Hadad

  18. Effects of Solidification under Ultrasonic Vibrations on Al11Ce3 Phase Fragmentation and Mechanical Properties of Al-10 wt.% Ce Alloy

    Article • Journal of Materials Engineering and Performance, March 2022, Springer Science + Business Media

    Shimaa El-Hadad

  19. Influence of the oxidation behavior of Ti–6Al–4V alloy in dry air on the oxide layer microstructure

    Article • Chemical Papers, January 2022, Springer Science + Business Media

    Shimaa El-Hadad

  20. Influence of Dendritic Fragmentation through Mg Addition on the Electrochemical Characteristics of Zn–0.5 wt% Al Alloy

    Article • International Journal of Metalcasting, August 2021, Springer Science + Business Media

    Shimaa El-Hadad

  21. Influence of Si Addition on the Microstructure, Hardness and Elevated-Temperature Sliding Wear Behavior of AX53 Magnesium Alloy

    Article • International Journal of Metalcasting, May 2021, Springer Science + Business Media

    Shimaa El-Hadad

  22. Strengthening Effect of Y2O3 on AZ92 Magnesium Alloy Using Stir Casting Process

    Article • International Journal of Metalcasting, September 2020, Springer Science + Business Media

    Shimaa El-Hadad

  23. Optimizing the Surface Treatment Processes to Enhance the Bioactivity of Ti–6Al–7Nb Alloy

    Article • Transactions of the Indian Institute of Metals, September 2020, Springer Science + Business Media

    Shimaa El-Hadad

  24. The Combined Effect of Cooling Slope Plate Casting and Mold Vibration on Microstructure, Hardness and Wear Behavior of Al–Si Alloy (A390)

    Article • International Journal of Metalcasting, August 2020, Springer Science + Business Media

    Shimaa El-Hadad

  25. Effects of Alloying with Sn and Mg on the Microstructure and Electrochemical Behavior of Cast Aluminum Sacrificial Anodes

    Article • International Journal of Metalcasting, June 2020, Springer Science + Business Media

    Shimaa El-Hadad

  26. Influence of Niobium Content on the Mechanical Properties and Abrasion Wear Resistance of Heat-Treated High-Chromium Cast Iron

    Article • International Journal of Metalcasting, June 2020, Springer Science + Business Media

    Shimaa El-Hadad

  27. Optimizing the Pouring Temperature for Semisolid Casting of a Hypereutectic Al–Si Alloy Using the Cooling Slope Plate Method

    Article • International Journal of Metalcasting, May 2020, Springer Science + Business Media

    Shimaa El-Hadad

  28. An overview: Textile surface modification by using sol-gel technology

    Article • Egyptian Journal of Chemistry, April 2020, Egypts Presidential Specialized Council for Education and Scientific Research

    Shimaa El-Hadad

  29. Surface modification of blended fabrics by silica nanoparticles to improve their printability

    Article • Egyptian Journal of Chemistry, April 2020, Egypts Presidential Specialized Council for Education and Scientific Research

    Shimaa El-Hadad

  30. Influence of Inoculant Type on the Microstructure Characteristics and Mechanical Properties of Ductile Iron

    Article • Transactions of the Indian Institute of Metals, March 2020, Springer Science + Business Media

    Shimaa El-Hadad

  31. Influence of Alloying Additives on the Electrochemical Behavior of Cast Al-5Zn Alloys

    Article • January 2020, Springer Science + Business Media

    Shimaa El-Hadad

  32. Effect of liquid-solid volume ratios on the interfacial microstructure and mechanical properties of high chromium cast iron and low carbon steel bimetal

    Article • Materials Research Express, December 2019, Institute of Physics Publishing

    Shimaa El-Hadad

  33. Effects of microstructure and alloy composition on hydroxyapatite precipitation on alkaline treated α/β titanium alloys

    Article • Materials Science and Engineering C, November 2019, Elsevier

    Shimaa El-Hadad

  34. Influence of chemical modification by Y2O3 on eutectic Si characteristics and tensile properties of A356 alloy

    Article • Transactions of Nonferrous Metals Society of China, July 2019, Elsevier

    Shimaa El-Hadad

  35. Ultrasonic Detection of Microstructure Features in Ti-Alloyed Ductile Iron

    Article • Transactions of the Indian Institute of Metals, April 2019, Springer Science + Business Media

    Shimaa El-Hadad

  36. The Influence of Microstructure on the Passive Layer Chemistry and Corrosion Resistance for Some Titanium-Based Alloys

    Article • Materials, April 2019, MDPI AG

    Shimaa El-Hadad

  37. Effect of Heat Treatment and Titanium Addition on the Microstructure and Mechanical Properties of Cast Fe31Mn28 Ni15Al24.5Tix High-Entropy Alloys

    Article • Advances in Materials Science and Engineering, January 2019, Hindawi Publishing Corporation

    Shimaa El-Hadad, mervat ibrahim

  38. Ultrasonication Effects on the Microstructure Characteristics of the A380 Die Cast Alloy

    Article • International Journal of Metalcasting, January 2019, Springer Science + Business Media

    Shimaa El-Hadad

  39. In-vitro and in-vivo, cytotoxicity evaluation of cast functionally graded biomaterials for dental implantology

    Article • Materials Science and Engineering C, December 2018, Elsevier

    Shimaa El-Hadad

  40. Microstructure control in functionally graded Al-Si castings

    Article • International Journal of Cast Metals Research, September 2018, Taylor & Francis

    Shimaa El-Hadad

  41. Hydroxyapatite Precipitation on Ti-6Al-4V and Ti-6Al-7Nb Alloys: Effect of Surface Conditions

    Article • February 2018, Wiley

    Shimaa El-Hadad

  42. Microstructure and Mechanical Properties of Heat Treated Ti-6Al-7Nb Alloy

    Article • February 2018, Wiley

    Shimaa El-Hadad

  43. Influence of heat treatment conditions on the mechanical properties of Ti–6Al–4V alloy

    Article • Canadian Metallurgical Quarterly, December 2017, Taylor & Francis

    Shimaa El-Hadad

  44. Surface Modification Effects on Microstructure and Mechanical Properties of Bio-Titanium Alloys

    Article • Materials Science Forum, November 2017, Trans Tech Publications

    Shimaa El-Hadad

  45. Enhancement of wear resistance and impact toughness of as cast hypoeutectic high chromium cast iron using niobium

    Article • International Journal of Cast Metals Research, August 2017, Taylor & Francis

    Shimaa El-Hadad

  46. Centrifugal Casting of Al–Si Scrap

    Article • January 2017, Springer Science + Business Media

    Shimaa El-Hadad

  47. Ultrasonic Rheo-Diecasting of A383 Aluminum Alloy

    Article • Solid State Phenomena, September 2016, Trans Tech Publications

    Shimaa El-Hadad

  48. Microstructural Effects on Corrosion Behavior of Investment Cast Ti-6.5Al-3.4Mo-1.7Zr Alloy

    Article • International Journal of Cast Metals Research, February 2016, Taylor & Francis

    Shimaa El-Hadad

  49. Effect of Soaking Treatment on the Microstructure and Wear Behavior of the Ultrasonic Melt‐Treated B390 Hypereutectic Al‐Si Alloy

    Article • February 2016, Wiley

    Shimaa El-Hadad

  50. Microstructure and mechanical properties of Al-alloyed ductile iron upon casting and austempering

    Article • Canadian Metallurgical Quarterly, January 2016, Taylor & Francis

    Shimaa El-Hadad

  51. Microstructure characteristics and tensile property of ultrasonic treated-thixocast A356 alloy

    Article • Transactions of Nonferrous Metals Society of China, October 2015, Elsevier

    Shimaa El-Hadad

  52. Surface modification of investment cast-316L implants: Microstructure effects

    Article • Materials Science and Engineering C, March 2015, Elsevier

    Shimaa El-Hadad

  53. Effects of Molybdenum Addition on the Microstructure and Mechanical Properties of Ni-Hard White Cast Iron

    Article • Transactions of the Indian Institute of Metals, February 2015, Springer Science + Business Media

    Shimaa El-Hadad

  54. Microstructure and Wear Behavior of Solidification Sonoprocessed B390 Hypereutectic Al-Si Alloy

    Article • Metallurgical and Materials Transactions A, October 2013, Springer Science + Business Media

    Shimaa El-Hadad

  55. Investigation of Wear Anisotropy in a Severely Deformed Al-Al3Ti Composite

    Article • Metallurgical and Materials Transactions A, May 2012, Springer Science + Business Media

    Shimaa El-Hadad

  56. Fabrication of Al/Al3Ti Functionally Graded Materials by Reaction Centrifugal Mixed-Powder Method

    Article • Japanese Journal of Applied Physics, January 2011, Japan Society of Applied Physics

    Dr Eri Miura-Fujiwara, Shimaa El-Hadad

  57. Wear of Al/Al3Zr functionally graded materials fabricated by centrifugal solid-particle method

    Article • Journal of Materials Processing Technology, November 2010, Elsevier

    Shimaa El-Hadad

  58. Fabrication of Al-Al3Ti/Ti3Al Functionally Graded Materials under a Centrifugal Force

    Article • Materials, September 2010, MDPI AG

    Dr Eri Miura-Fujiwara, Shimaa El-Hadad

  59. Anisotropic mechanical properties of equal channel angular pressed Al–5% Zr alloy containing platelet particles

    Article • Materials Science and Engineering A, July 2010, Elsevier

    Shimaa El-Hadad

  60. Effects of the Processing Temperature of Centrifugal Casting on the Mechanical Properties of Al-Al3Ti FGMs

    Article • Materials Science Forum, October 2009, Trans Tech Publications

    Shimaa El-Hadad

  61. Investigation of the Mechanical Properties in Al/Al3Zr FGMs Fabricated by Centrifugal Casting Method

    Article • Materials Science Forum, October 2009, Trans Tech Publications

    Shimaa El-Hadad

  62. Effects of Processing Routes on Wear Property of Al-Al<sub>3</sub>Ti Alloys Severely Deformed by ECAP

    Article • Materials Science Forum, June 2008, Trans Tech Publications

    Shimaa El-Hadad

  63. Role of Bi and Ca Additions in Controlling the Microstructure of Sr-Modified 319 Alloys

    Article • Materials Science Forum, July 2006, Trans Tech Publications

    Shimaa El-Hadad

  64. Effects of Bi and Ca addition on the characteristics of eutectic Si particles in Sr-modified 319 alloys

    Article • International Journal of Cast Metals Research, May 2003, Taylor & Francis

    Shimaa El-Hadad