All Stories

  1. Fabrication of TiO2/SiO2 Composite Coating via a High-Temperature Self-Organizing Porous TiO2 Layer on Ti

    Article • Journal of the Japan Institute of Metals and Materials, January 2018, Japan Institute of Metals

    Dr Eri Miura-Fujiwara

  2. Effects of shot-peening and atmospheric-pressure plasma on aesthetic improvement of Ti–Nb–Ta–Zr alloy for dental applications

    Article • Japanese Journal of Applied Physics, December 2017, Japan Society of Applied Physics

    Dr Eri Miura-Fujiwara

  3. Comparison of mechanical characteristics of focused ion beam fabricated silicon nanowires

    Article • Japanese Journal of Applied Physics, May 2017, Japan Society of Applied Physics

    Dr Eri Miura-Fujiwara

  4. New Processing Routes for Functionally Graded Materials and Structures through Combinations of Powder Metallurgy and Casting

    Article • March 2016, IntechOpen

    Dr Eri Miura-Fujiwara

  5. Fabrication of TiO2/SiO2 Composite Coating via a High-Temperature Self-Organizing Microporous TiO2 Layer on Ti

    Article • MATERIALS TRANSACTIONS, January 2016, Japan Institute of Metals

    Dr Eri Miura-Fujiwara

  6. Functionally Graded Metallic Biomaterials

    Article • January 2015, Springer Science + Business Media

    Dr Eri Miura-Fujiwara

  7. Frictional and Wear Behavior of Commercially Pure Ti, Ti-6Al-7Nb, and SUS316L Stainless Steel in Artificial Saliva at 310 K

    Article • MATERIALS TRANSACTIONS, January 2015, Japan Institute of Metals

    Dr Eri Miura-Fujiwara

  8. Color tone and interfacial microstructure of white oxide layer on commercially pure Ti and Ti–Nb–Ta–Zr alloys

    Article • Japanese Journal of Applied Physics, October 2014, Japan Society of Applied Physics

    Dr Eri Miura-Fujiwara

  9. Aesthetic and Mechanical Properties of Oxide Coated Ti-Nb-Ta-Zr Alloys as a Dental Material

    Article • September 2013, Wiley

    Dr Eri Miura-Fujiwara

  10. White-Ceramic Conversion on Ti-29Nb-13Ta-4.6Zr Surface for Dental Applications

    Article • Advances in Materials Science and Engineering, January 2013, Hindawi Publishing Corporation

    Dr Eri Miura-Fujiwara

  11. Effects of Dispersoids on Wear Behavior of Cu-Based Nanocomposite Containing SiO$_{2}$ Nanoparticles

    Article • Japanese Journal of Applied Physics, January 2012, Japan Society of Applied Physics

    Dr Eri Miura-Fujiwara

  12. Experimental Study on Severe Plastic Deformation of Ti by Novel Equal-Channel Angular Pressing

    Article • Japanese Journal of Applied Physics, January 2012, Japan Society of Applied Physics

    Dr Eri Miura-Fujiwara

  13. Phase Transformation in Fe Alloys Induced by Surface Treatment

    Article • Materials Science Forum, January 2012, Trans Tech Publications

    Dr Eri Miura-Fujiwara

  14. Fabrication of Metal-Based Functionally Graded Grinding Wheel by a Centrifugal Mixed-Powder Method

    Article • Materials Science Forum, January 2012, Trans Tech Publications

    Dr Eri Miura-Fujiwara

  15. Training Effects on Damping Capacity in Mn-22.5mass%Cu-5mass%Ni-2mass%Fe Alloy

    Article • Materials Science Forum, January 2012, Trans Tech Publications

    Dr Eri Miura-Fujiwara

  16. Effects of Dispersoids on Wear Behavior of Cu-Based Nanocomposite Containing SiO2Nanoparticles

    Article • Japanese Journal of Applied Physics, January 2012, Japan Society of Applied Physics

    Dr Eri Miura-Fujiwara

  17. Experimental Study on Severe Plastic Deformation of Ti by Novel Equal-Channel Angular Pressing

    Article • Japanese Journal of Applied Physics, January 2012, Japan Society of Applied Physics

    Dr Eri Miura-Fujiwara

  18. Formation Behavior of Wear-Induced Layer in Fe-Ni Alloys

    Article • Transactions of the Materials Research Society of Japan, January 2012, The Materials Research Society of Japan

    Dr Eri Miura-Fujiwara

  19. Fabrication of Mg-based functionally graded materials by a reaction centrifugal mixed-powder method

    Article • Journal of Japan Institute of Light Metals, January 2012, Japan Institute of Light Metals

    Dr Eri Miura-Fujiwara

  20. Microstructures and mechanical properties of titanium/biodegradable-polymer FGM for bone tissue fabricated by spark plasma sintering method

    Article • Journal of Materials Processing Technology, December 2011, Elsevier

    Dr Eri Miura-Fujiwara

  21. Fabrication of Al/Al3Ti Functionally Graded Materials by Reaction Centrifugal Mixed-Powder Method

    Article • Japanese Journal of Applied Physics, January 2011, Japan Society of Applied Physics

    Dr Eri Miura-Fujiwara, Shimaa El-Hadad

  22. Finite Element Analysis of Severe Plastic Deformation of Difficult-to-Work Material by Equal-Channel Angular Pressing at Ambient Temperature

    Article • Japanese Journal of Applied Physics, January 2011, Japan Society of Applied Physics

    Dr Eri Miura-Fujiwara

  23. Fabrication of Al/Al3Ti Functionally Graded Materials by Reaction Centrifugal Mixed-Powder Method

    Article • Japanese Journal of Applied Physics, January 2011, Japan Society of Applied Physics

    Dr Eri Miura-Fujiwara

  24. Fabrication of functionally graded grinding wheel by a centrifugal mixed-powder method for CFRP-drilling applications

    Article • International Journal of Materials and Product Technology, January 2011, Inderscience Publishers

    Dr Eri Miura-Fujiwara

  25. Fabrication of Al-Al3Ti/Ti3Al Functionally Graded Materials under a Centrifugal Force

    Article • Materials, September 2010, MDPI AG

    Dr Eri Miura-Fujiwara, Shimaa El-Hadad

  26. Grain Refinement Performance of Al Cast Using Machining Chips

    Article • Materials Science Forum, June 2010, Trans Tech Publications

    Dr Eri Miura-Fujiwara

  27. Effects of Phase Transformation Temperature on Formation of Wear-Induced Layer in Fe-Ni Alloys

    Article • Materials Science Forum, June 2010, Trans Tech Publications

    Dr Eri Miura-Fujiwara

  28. Fabrication of Ti-Based Biodegradable Material Composites Prepared by Spark Plasma Sintering Method

    Article • Materials Science Forum, June 2010, Trans Tech Publications

    Dr Eri Miura-Fujiwara

  29. Fabrication of Functionally Graded Materials by Centrifugal Slurry-Pouring Method and Centrifugal Mixed-Powder Method

    Article • Journal of the Japan Society of Powder and Powder Metallurgy, January 2010, Japan Society of Powder and Powder Metallurgy

    Dr Eri Miura-Fujiwara

  30. A Novel Fabrication Method for Functionally Graded Materials under Centrifugal Force: The Centrifugal Mixed-Powder Method

    Article • Materials, December 2009, MDPI AG

    Dr Eri Miura-Fujiwara

  31. Optical properties and microstructures of Pd-free Ag–Au–Pt–Cu dental alloys

    Article • Journal of Materials Science, March 2009, Springer Science + Business Media

    Dr Eri Miura-Fujiwara

  32. Variations of color with alloying elements in Pd-free Au–Pt-based high noble dental alloys

    Article • Materials Science and Engineering B, June 2007, Elsevier

    Dr Eri Miura-Fujiwara

  33. Mechanical Property and Corrosion Resistance Evaluations of Ti-6Al-7Nb Alloy Brazed with Bulk Metallic Glasses

    Article • MATERIALS TRANSACTIONS, January 2007, Japan Institute of Metals

    Dr Eri Miura-Fujiwara

  34. Effect of Gold Coating on Interfacial Reaction between Dental Porcelain and Titanium

    Article • Journal of the Japan Institute of Metals and Materials, January 2006, Japan Institute of Metals

    Dr Eri Miura-Fujiwara

  35. A TEM study on the semicoherent precipitates in a Nb–19%Mo alloy

    Article • Acta Materialia, April 2005, Elsevier

    Dr Eri Miura-Fujiwara

  36. Effect of cold working on ordering of an equiatomic CuPt alloy

    Article • Journal of Alloys and Compounds, April 2005, Elsevier

    Dr Eri Miura-Fujiwara

  37. Factors affecting the optical properties of Pd-free Au–Pt-based dental alloys

    Article • Journal of Materials Science Materials in Medicine, December 2003, Springer Science + Business Media

    Dr Eri Miura-Fujiwara

  38. Internal-friction study of the interstitial–substitutional effect on the deformation behaviour of Nb–O, Nb–Ta–O and Nb–Mo–O single crystals

    Article • The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics, July 2003, Taylor & Francis

    Dr Eri Miura-Fujiwara

  39. High resolution transmission electron microscopy of age-hardenable Au–Cu–Zn alloys for dental applications

    Article • Biomaterials, May 2003, Elsevier

    Dr Eri Miura-Fujiwara

  40. Ordering behaviors and age-hardening in experimental AuCu–Zn pseudobinary alloys for dental applications

    Article • Biomaterials, December 2002, Elsevier

    Dr Eri Miura-Fujiwara

  41. Deformation behavior of Mo5Si3 single crystal at high temperatures

    Article • Materials Science and Engineering A, June 2002, Elsevier

    Dr Eri Miura-Fujiwara

  42. Oxygen–molybdenum interaction with dislocations in Nb-Mo single crystals at elevated temperatures

    Article • Acta Materialia, June 2002, Elsevier

    Dr Eri Miura-Fujiwara

  43. Partial phase diagram for the AuCu–Zn pseudobinary system

    Article • Journal of Alloys and Compounds, June 2002, Elsevier

    Dr Eri Miura-Fujiwara

  44. Article • Journal of Materials Science Materials in Medicine, January 2002, Springer Science + Business Media

    Dr Eri Miura-Fujiwara

  45. Optical Properties of Au-Pt and Au-Pt-In Alloys

    Article • Gold Bulletin, December 2001, Springer Science + Business Media

    Dr Eri Miura-Fujiwara