All Stories

  1. Insights into the Effects of Pore Structure, Time Scale, and Injection Scenarios on Pore-Filling Sequence and Oil Recovery by Low-Salinity Waterflooding Using a Mechanistic DLVO-Based Pore-Scale Model
  2. Toward low-salinity waterflooding predictive capability development in carbonates for fast screening of oil-brine-rock candidates
  3. Asphaltene destabilization in the presence of an aqueous phase: The effects of salinity, ion type, and contact time
  4. A systematic study of asphaltic sludge and emulsion formation damage during acidizing process: Experimental and modeling approach
  5. Bacteria Cell Hydrophobicity and Interfacial Properties Relationships: A New MEOR Approach
  6. A new insight to the assessment of asphaltene characterization by using fortier transformed infrared spectroscopy
  7. Experimental investigation on the dominating fluid-fluid and rock-fluid interactions during low salinity water flooding in water-wet and oil-wet calcites
  8. Atomistic Insight into the Behavior of Ions at an Oil-Bearing Hydrated Calcite Surface: Implication to Ion-Engineered Waterflooding
  9. Numerical analysis of two-phase flow in heterogeneous porous media during pre-flush stage of matrix acidizing: Optimization by response surface methodology
  10. Experimental Investigation on Synergic Effect of Salinity and pH during Low Salinity Water Injection into Carbonate Oil Reservoirs
  11. Molecular Dynamics Simulation of Calcium Sulfate Nucleation in Homogeneous and Heterogeneous Crystallization Conditions: An Application in Water Flooding
  12. How do ions contribute to brine-hydrophobic hydrocarbon Interfaces? An in silico study
  13. A Deep Look into the Dynamics of Saltwater Imbibition in a Calcite Nanochannel: Temperature Impacts Capillarity Regimes
  14. Microscopic Insight into Kinetics of Inorganic Scale Deposition during Smart Water Injection Using Dynamic Quartz Crystal Microbalance and Molecular Dynamics Simulation
  15. Ion-specific interactions at calcite–brine interfaces: a nano-scale study of the surface charge development and preferential binding of polar hydrocarbons
  16. The Impact of Salinity on the Interfacial Structuring of an Aromatic Acid at the Calcite/Brine Interface: An Atomistic View on Low Salinity Effect
  17. Mechanistic study to investigate the effects of different gas injection scenarios on the rate of asphaltene deposition: An experimental approach
  18. An atomistic insight into interfacial properties of brine nanofilm confined between calcite substrate and hydrocarbon layer
  19. Laboratory evaluation of nitrogen injection for enhanced oil recovery: Effects of pressure and induced fractures
  20. Modeling interfacial tension of normal alkane-supercritical CO2 systems: Application to gas injection processes
  21. Interactions between Rock/Brine and Oil/Brine Interfaces within Thin Brine Film Wetting Carbonates: A Molecular Dynamics Simulation Study
  22. Injecting water containing sulfate would improve oil recovery efficiency.
  23. The impact of salinity on ionic characteristics of thin brine film wetting carbonate minerals: An atomistic insight
  24. Smart water flooding performance in carbonate reservoirs: an experimental approach for tertiary oil recovery
  25. Productivity enhancement of solar stills by nano-coating of condensing surface
  26. Pore-scale investigation of selective plugging mechanism in immiscible two-phase flow using phase-field method
  27. Experimental investigation on asphaltene biodegradability using microorganism: cell surface properties’ approach
  28. Minimum miscibility pressure and interfacial tension measurements for N2 and CO2 gases in contact with W/O emulsions for different temperatures and pressures
  29. Effects of asphaltene, resin and crude oil type on the interfacial tension of crude oil/brine solution
  30. Comparing the effects of CH 4 , CO 2 , and N 2 injection on asphaltene precipitation and deposition at reservoir condition: A visual and modeling study
  31. A Heuristic Insight on End-Point Calculation and a New Phase Interference Parameter in Two-Phase Relative Permeability Curves for Horizontal Fracture Flow
  32. The Effect of Dispersed Phase Salinity on Water-in-Oil Emulsion Flow Performance: A Micromodel Study
  33. New expert system for enhanced oil recovery screening in non-fractured oil reservoirs
  34. Mechanistic study of wettability alteration of oil-wet calcite: The effect of magnesium ions in the presence and absence of cationic surfactant
  35. A rigorous approach to predict nitrogen-crude oil minimum miscibility pressure of pure and nitrogen mixtures
  36. Correction to Effect of Salinity, Resin, and Asphaltene on the Surface Properties of Acidic Crude Oil/Smart Water/Rock System
  37. Phase behavior and interfacial tension evaluation of a newly designed surfactant on heavy oil displacement efficiency; effects of salinity, wettability, and capillary pressure
  38. Molecular dynamics simulation investigation of hexanoic acid adsorption onto calcite (
  39. Interfacial Tension and Wettability Change Phenomena during Alkali–Surfactant Interactions with Acidic Heavy Crude Oil
  40. Investigation of volumetric fluid properties of (heptane + hexadecane) at reservoir conditions
  41. Interfacial resistance in CO2-normal alkane and N2-normal alkane systems: An experimental and modeling investigation
  42. Effect of Salinity, Resin, and Asphaltene on the Surface Properties of Acidic Crude Oil/Smart Water/Rock System
  43. The Impacts of Aqueous Ions on Interfacial Tension and Wettability of an Asphaltenic–Acidic Crude Oil Reservoir during Smart Water Injection
  44. Studying the Mechanistic Behavior of Heavy Oil Displacement Using a Group of Alkalis and Surfactant Mixtures
  45. Experimental Determination of Equilibrium Interfacial Tension for Nitrogen-Crude Oil during the Gas Injection Process: The Role of Temperature, Pressure, and Composition
  46. Evaluation of interfacial mass transfer coefficient as a function of temperature and pressure in carbon dioxide/normal alkane systems
  47. Pressure and temperature functionality of paraffin-carbon dioxide interfacial tension using genetic programming and dimension analysis (GPDA) method
  48. Investigation of wettability alteration through relative permeability measurement during MEOR process: A micromodel study
  49. Toward mechanistic understanding of heavy crude oil/brine interfacial tension: The roles of salinity, temperature and pressure
  50. Mechanistic Investigation on Dynamic Interfacial Tension Between Crude Oil and Ionic Liquid Using Mass Transfer Concept
  51. Effects of Paraffinic Group on Interfacial Tension Behavior of CO2–Asphaltenic Crude Oil Systems
  52. Isolation and Characterization of Gram-Positive Biosurfactant-Producing Halothermophilic Bacilli from Iranian Petroleum Reservoirs
  53. Secondary and Tertiary Thermally Induced Gas-oil Gravity Drainage from Oil-wet Fractured Rocks: Experiments under Reservoir Conditions
  54. Effect of Nanofluid Treatment on Water Sensitive Formation to Investigate Water Shock Phenomenon, An Experimental Study
  55. Modification of rock/fluid and fluid/fluid interfaces during MEOR processes, using two biosurfactant producing strains of Bacillus stearothermophilus SUCPM#14 and Enterobacter cloacae: A mechanistic study
  56. Effect of Resins on Asphaltene Deposition and the Changes of Surface Properties at Different Pressures: A Microstructure Study
  57. Mathematical Modeling of Colloidal Particles Transport in the Medium Treated by Nanofluids: Deep Bed Filtration Approach
  58. Asphaltenes biodegradation under shaking and static conditions
  59. Investigating the efficiency of MEOR processes using Enterobacter cloacae and Bacillus stearothermophilus SUCPM#14 (biosurfactant-producing strains) in carbonated reservoirs
  60. Experimental Determination of Interfacial Tension and Miscibility of the CO2–Crude Oil System; Temperature, Pressure, and Composition Effects
  61. Effect of different families (imidazolium and pyridinium) of ionic liquids-based surfactants on interfacial tension of water/crude oil system
  62. Mitigation of Fine Particles Migration in Deep Bed Filters Treated by a Nanofluid Slug: An Experimental Study
  63. Dynamic interfacial tension behavior between heavy crude oil and ionic liquid solution (1-dodecyl-3-methylimidazolium chloride ([C12mim][Cl]+distilled or saline water/heavy crude oil)) as a new surfactant
  64. Evaluation of Chemicals Interaction with Heavy Crude Oil through Water/Oil Emulsion and Interfacial Tension Study
  65. A new correlation for estimating thermal conductivity of pure ionic liquids
  66. Enhanced Carbon Dioxide Separation by Amine-Promoted Potassium Carbonate Solution in a Hollow Fiber Membrane Contactor
  67. The Gas–Oil Interfacial Behavior during Gas Injection into an Asphaltenic Oil Reservoir
  68. Statistical Screening of Medium Components for Recombinant Production of Pseudomonas aeruginosa ATCC 9027 Rhamnolipids by Nonpathogenic Cell Factory Pseudomonas putida KT2440
  69. Optimal producer well placement and production planning in an oil reservoir
  70. Investigating the Effects of Temperature, Pressure, and Paraffin Groups on the N2 Miscibility in Hydrocarbon Liquids using the Interfacial Tension Measurement Method
  71. Hydrodynamic behavior of Kangan gas-capped deep confined aquifer in Iran
  72. Remediation of colloid-facilitated contaminant transport in saturated porous media treated by nanoparticles
  73. Enterobacter cloacae as biosurfactant producing bacterium: Differentiating its effects on interfacial tension and wettability alteration Mechanisms for oil recovery during MEOR process
  74. Permeability reduction of membranes during particulate suspension flow; analytical micro model of size exclusion mechanism
  75. Core flooding tests to investigate the effects of IFT reduction and wettability alteration on oil recovery during MEOR process in an Iranian oil reservoir
  76. Experimental investigation of secondary and tertiary oil recovery from fractured porous media
  77. Temperature and Composition Effect on CO2 Miscibility by Interfacial Tension Measurement
  78. Analysis of CO2 Separation with Aqueous Potassium Carbonate Solution in a Hollow Fiber Membrane Contactor
  79. Investigating the effect of ionic liquid (1-dodecyl-3-methylimidazolium chloride ([C12mim] [Cl])) on the water/oil interfacial tension as a novel surfactant
  80. AN EXPERIMENTAL STUDY OF INTERACTION BETWEEN NANOPARTICLES' DEPOSITION ON A SINTERED POROUS MEDIUM AND MIGRATORY FINES
  81. Asphaltene precipitation in live crude oil during natural depletion: Experimental investigation and modeling
  82. Asphaltene Deposition in Carbonate Rocks: Experimental Investigation and Numerical Simulation
  83. Wettability alteration of carbonate rocks by surfactants: A mechanistic study
  84. Multivariate Curve Resolution Alternating Least-Squares As a Tool for Analyzing Crude Oil Extracted Asphaltene Samples
  85. Viscosity prediction of ternary mixtures containing ILs using multi-layer perceptron artificial neural network
  86. Artificial neural network as an applicable tool to predict the binary heat capacity of mixtures containing ionic liquids
  87. Effect of Nanofluid Injection on Fines Mitigation to Remediate Formation Damage: A Microscopic View
  88. Investigating wettability alteration during MEOR process, a micro/macro scale analysis
  89. Experimental Investigation of Matrix Wettability Effects on Water Imbibition in Fractured Artificial Porous Media
  90. Prediction of Three-Dimensional (3-D) Adhesion Maps, Using the Stability of the Thin Wetting Film during the Wettability Alteration Process
  91. Investigating the Fracture Network Effects on Sweep Efficiency during WAG Injection Process
  92. Asphaltene Deposition during CO2 Injection and Pressure Depletion: A Visual Study
  93. EXPERIMENTAL INVESTIGATION OF WETTABILITY EFFECT AND DRAINAGE RATE ON TERTIARY OIL RECOVERY FROM FRACTURED MEDIA
  94. Investigating the effect of different asphaltene structures on surface topography and wettability alteration
  95. Automatic recognition of oil reservoir models from well testing data by using multi-layer perceptron networks
  96. Biosurfactant production under extreme environmental conditions by an efficient microbial consortium, ERCPPI-2
  97. Atomic Force Microscopy (AFM) Investigation on the Surfactant Wettability Alteration Mechanism of Aged Mica Mineral Surfaces
  98. Image synthesis using Conditional Random Fields
  99. Atomic Force Microscopy and Wettability Study of the Alteration of Mica and Sandstone by a Biosurfactant-Producing Bacterium Bacillus thermodenitrificans
  100. Investigating wettability alteration due to asphaltene precipitation: Imprints in surface multifractal characteristics
  101. Prediction of Asphaltene Precipitation: Learning from Data at Different Conditions
  102. Laboratory Study of Alkyl Ether Sulfonates for Improved Oil Recovery in High-Salinity Carbonate Reservoirs: A Case Study
  103. EXPERIMENTAL INVESTIGATION OF TERTIARY OIL GRAVITY DRAINAGE IN FRACTURED POROUS MEDIA
  104. Fractal characteristics of an asphaltene deposited heterogeneous surface
  105. Simulation of steam distillation process using neural networks
  106. Analysis and Simulation of Steam Distillation Mechanism during the Steam Injection Process
  107. Experimental Investigation of a Viscous Surfactant and Surfactant Flooding to Enhance Oil Recovery
  108. Mathematical modelling of flue-gas desulphurisation using lime slurry in a turbulent contact absorber
  109. Mathematical modeling of gas–liquid membrane contactors using random distribution of fibers
  110. Mathematical modeling of the simultaneous absorption of carbon dioxide and hydrogen sulfide in a hollow fiber membrane contactor
  111. Characterization of asphaltene structure using atomic force microscopy
  112. A modified square well model in obtaining the surface tension of pure and binary mixtures of hydrocarbons
  113. Analysis of CO2 separation and simulation of a partially wetted hollow fiber membrane contactor
  114. SIMULTANEOUS HEAT AND FLUID FLOW IN POROUS MEDIA: CASE STUDY: STEAM INJECTION FOR TERTIARY OIL RECOVERY
  115. Development of a User-Friendly Virtual Laboratory for Simulating Three-Dimensional Transient Heat Transfer in Regularly Shaped Solids
  116. Numerical Modeling of the Gas-Oil Gravity Drainage Process in Stratified and Fractured Porous Media
  117. The Possibility of Wax Formation in Gas Fields: a Case Study
  118. The in situ microbial enhanced oil recovery in fractured porous media
  119. EXPERIMENTAL AND THEORETICAL INVESTIGATION OF LNAPL MOVEMENT IN STRATIFIED MEDIA DURING SOIL REMEDIATION
  120. Laboratory investigation of thermally-assisted gas–oil gravity drainage for secondary and tertiary oil recovery in fractured models
  121. Mathematical Investigation of Effective Thermal Conductivity in Fractured Porous Media
  122. Temperature Effects on the Oil Relative Permeability during Tertiary Gas Oil Gravity Drainage (GOGD)
  123. Experimental Measurement and Modeling of R22 (CHClF2) Hydrates in Mixtures of Acetone + Water
  124. Intermittent gas lift in Aghajari oil field, a mathematical study
  125. Measurements and modeling of bubble points in binary carbon dioxide systems with tetrahydropyran and methylcyclohexane
  126. A compressed liquid density correlation
  127. Generalized saturated liquid density prediction method for pure compounds and multi-component mixtures
  128. An extended saturated liquid density equation
  129. Test of mathematical modeling for the design of high energy scrubbers