All Stories

  1. Bioinspired transparent antenna for WLAN application in 5 GHz
  2. Influência da concentração de lodo sobre o consumo de energia para aeração em sistemas de lodo ativado
  3. 4th order capacitively-coupled LC-basedΣΔmodulator
  4. Foreword
  5. Microelectrodes array technology: A review of integrated circuit biopotential amplifiers
  6. Second-order Thermal Sigma-Delta applied to resistive bolometers on infrared detection
  7. A 70.4dB voltage gain, 2.3dB NF, fully integrated multi-standard UHF receiver front-end in CMOS 130-nm
  8. Analysis of a radio physical layer fault in WirelessHART networks
  9. Disturbance observer for estimation of oxygen uptake rate in an activated sludge reactor
  10. Requirements for an integrated conditioning circuit for multiphase flow imaging using impedance wire-mesh sensors
  11. SystemC AMS modeling of a sensor node energy consumption and battery state-of-charge for WSN
  12. SPICE-based dynamical model of a NTC thermoresistive sensor for anemometer applications
  13. Analysis and System-Level Design of a High Resolution Incremental ΣΔ ADC for Biomedical Applications
  14. Architectural specification for infusion pumps and realization towards safety technological trends
  15. A controlled-temperature hot-wire anemometer with voltage feedback linearization
  16. Flexible A/D converter architecture targeting sparse signals
  17. Switched-capacitor pulse-width programmable gain integrating amplifier
  18. Ultrasonic time-of-flight estimation based on maximum likelihood data fusion using triangular distribution
  19. Design of RF BAW-based ΣΔ Modulators
  20. Specifications for a multi-standard SBCD/ARGOS-3 integrated UHF satellite receiver
  21. 8-bit folding ADC based on switched capacitor
  22. Pulse-width programmable gain integrating amplifier
  23. Uncertainty analysis of a superregenerative pulse-width programmable gain amplifier
  24. Wind speed measurement based on time-of-flight estimation using Extended Kalman Filter
  25. Wind speed measurement based on ultrasonic sensors using Discrete Fourier Transform
  26. Evidence theory and data fusion application for wind speed measurement
  27. Sensitivity analysis and automatic adjustment of a controlled-temperature thermoresistive-based anemometer
  28. Wind speed measurement method using ultrasonic sensors with stationary wavelet transform
  29. Continuous-time identification of a PWM aerated bench scale activated sludge reactor using state-variable filters
  30. Current transformer with nanocrystalline alloy core for measurement
  31. Development of a volumetric meter for low gas flow rate
  32. Energy harvesting circuit using variable capacitor for power systems
  33. Multilayer measuring system and uncertainty analysis using ultrasonic sensors with wavelet transform
  34. Editorial
  35. State space decoupling control design methodology for switching converters
  36. State space decoupling approach for feedback controller design of switching converters
  37. Dissolved oxygen PWM control and oxygen uptake rate estimation using Kalman Filter in activated sludge systems
  38. Automatic dynamic range adjustment of a controlled-temperature thermoresistive-based anemometer
  39. CMOS sigma-delta thermal modulator
  40. A Q-enhanced LC bandpass filter using CAIRO+
  41. State space control for buck converter using decoupled block diagram approach
  42. Maximum-Likelihood Data Fusion of Phase-Difference and Threshold-Detection Techniques for Wind-Speed Measurement
  43. Applications of Thermoresistive Sensors Using the Electric Equivalence Principle
  44. Determination of body density by the hydrostatic weighting: Dynamometer versus load cell
  45. Subcutaneous fat tissue thickness measurement based on ultrasound
  46. Data Fusion Methods based on Fuzzy Theory for Wind Speed Measurement using Ultrasonic Transducers
  47. Programmable Analog Signal Conditioning Circuit for Integrated Systems
  48. DC-Amplifier-Input-Offset-Voltage Control in a Constant-Temperature Thermoresistive-Sensor-Measurement Instrument
  49. Indirect Measurement of the Temperature in a Resistive Furnace
  50. Measurement of Respiratory Flow with Ultrasonic Sensor Using the Technique of Forced Oscillations
  51. A-to-D Converter and Lookup Table Dimensioning for Six- or Five-Port Phase Discriminators
  52. Designing a programmable analog signal conditioning circuit without loss of measurement range
  53. Feedback control method for estimating the oxygen uptake rate in activated sludge systems
  54. An auto-routing multi-server architecture for high-education training on instrumentation and measurement
  55. Architectures of anemometers using the electric equivalence principle
  56. Instrumentations for microalternator voltage and speed digital automatic control
  57. Programming an analog signal conditioning circuit without loss in measurement range
  58. Optimized look-up table for inter-mesurand compensation