All Stories

  1. Degradation Structure of EPDM Revealed by Sequential PCA and Kendrick Mass Three-Dimensional Analysis of Temperature-Dependent High-Resolution Mass Spectra
  2. Amination–degradation of super engineering plastics for the construction of surface emissive resin materials
  3. Chromatogram-Kendrick Mass (CKM) Plot for Comprehensive Visualization of Pyrolysis Products in Polyolefin Blends
  4. Study on Changing Free-Volume Hole Size of Polylactic Acid by Annealing and Its Influence on Enzymatic Degradation Rate
  5. End-group analysis of polycarbonates using evolved gas analysis-time-of-flight mass spectrometry combining principal component analysis and Kendrick mass defect analysis
  6. Amination–Degradation of Super Engineering Plastics for the Construction of Surface Emissive Resin Materials
  7. Elucidating Structural Variations at Heterogeneous Interfaces in Polymer Blends Using Evolved Gas Analysis with Time-of-Flight Mass Spectrometry Under Field Ionization
  8. Room-temperature processed epoxy-silica nanocomposite coating for improved hardness and UV protection of polycarbonate
  9. Biodegradable Properties of PET Analogous Furan‐Based Polyesters in the Seas
  10. Structural Analysis of Polymer Composites Using a Combined Approach of Fourier Transform Infrared Microscopy and Two-Dimensional Correlation Spectroscopy
  11. High-Resolution TG-TOFMS Coupled with Principal Component Analysis and Kendrick Mass Defect Analysis: Elucidation of Molecular-Scale Degradation Behavior of Glass Fiber Reinforced Polypropylene during Thermo-Oxidative Degradation
  12. End-Group Analysis of Polycarbonates Using Evolved Gas Analysis-Time-Of-Flight Mass Spectrometry Combining Principal Component Analysis and Kendrick Mass Defect Analysis
  13. Nacre-Inspired Nanocomposites from Natural Polypeptide ε-Poly-l-Lysine and Natural Clay Montmorillonite: Remarkable Reinforcing Effect at Low Polymer Content and Its Mechanism
  14. Quantitative evaluation of particle–binder interactions in ceramic slurries via differential centrifugal sedimentation
  15. Revealing Molecular-Scale Structural Changes in Polymer Nanocomposites during Thermo-Oxidative Degradation Using Evolved Gas Analysis with High-Resolution Time-of-Flight Mass Spectrometry Combined with Principal Component Analysis and Kendrick Mass Def...
  16. Hidden correlation between rheological dynamics and crack formation in water-based slurry
  17. Real-time monitoring of the thermooxidative degradation behavior of poly(acrylonitrile-butadiene-styrene) using isothermal in-situ Fourier transform infrared spectroscopy combined with principal component analysis
  18. Easy and scalable synthesis of a lignosulfonate-derived thermoplastic with improved thermal and mechanical properties
  19. Kendrick mass defect analysis-based data mining technique for trace components in polyolefins observed by pyrolysis-gas chromatography/high-resolution mass spectrometry
  20. Photodegradation behavior of polyethylene terephthalate analyzed by MALDI-TOFMS and ATR-FTIR microscopic analysis in combination with two-trace two-dimensional (2T2D) correlation mapping
  21. Depolymerization of robust polyetheretherketone to regenerate monomer units using sulfur reagents
  22. Network Degradation Assessed by Evolved Gas Analysis–Mass Spectrometry Combined with Principal Component Analysis (EGA–MS–PCA): A Case of Thermo-Oxidized Epoxy/Amine Network
  23. In-situ infrared cure monitoring combined with two-trace two-dimensional (2T2D) correlation analysis to elucidate the matrix–filler interaction of nanocomposites: Case of thermosetting urethane/silica nanospheres
  24. Molecular-scale deformation of glass-fiber-reinforced polypropylene probed by rheo-optical Fourier transform infrared imaging combined with a two-trace two-dimensional correlation technique
  25. Amorphous polyamide m ‐xylylenediamine‐adipic acid‐isophthalic acid copolymer (MXD6I) : Evaluation of oxygen barrier property and free volume in high humidity condition
  26. 顕微赤外分光法による高分子とフィラー界面構造の可視化
  27. Rheo-optical Near-infrared (NIR) Analysis of Binary Amorphous Polymer Blend Consisting of Polyvinyl Chloride (PVC) and Polymethyl Methacrylate (PMMA)
  28. Three-way evolved gas analysis-mass spectrometry combined with principal component analysis (EGA-MS-PCA) to probe interfacial states between matrix and filler in poly(styrene-b-butadiene-b-styrene) (SBS) nanocomposites
  29. Biobased and mechanically stiff lignosulfonate/cationic-polyelectrolyte/sugar complexes with coexisting ionic and covalent crosslinks
  30. Aging of polypropylene probed by near infrared spectroscopy
  31. Fourier Transform Infrared Imaging Analysis of Interactions Between Polypropylene Grafted with Maleic Anhydride and Silica Spheres Using Two-Trace Two-Dimensional Correlation Mapping
  32. In Situ Fourier Transform Infrared Spectroscopic Imaging for Elucidating Variations in Chemical Structures of Polymer Composites at the Matrix–Filler Interface during Reactive Processing
  33. Insight into interfacial compatibilization of glass-fiber-reinforced polypropylene (PP) using maleic-anhydride modified PP employing infrared spectroscopic imaging
  34. A study of molecular architectural dynamics of crosslinked urethane during photo-aging by two-dimensional infrared correlation spectroscopy
  35. Molecular-Scale Deformation of Polypropylene/Silica Composite Probed by Rheo-Optical Fourier Transform Infrared (FTIR) Imaging Analysis Combined with Disrelation Mapping
  36. Polypropylene-Based Nanocomposite with Enhanced Aging Stability by Surface Grafting of Silica Nanofillers with a Silane Coupling Agent Containing an Antioxidant
  37. Accelerated aging-induced variation of polypropylene (PP) structure studied by two-dimensional (2D) small-angle X-ray scattering (SAXS) correlation spectroscopy
  38. Solvent-induced degradation of polyurethane studied by two-dimensional (2D) infrared (IR) correlation spectroscopy
  39. Study of matrix-filler interaction of polypropylene/silica composite by combined infrared (IR) spectroscopic imaging and disrelation mapping
  40. Rheo-Optical Near-Infrared (NIR) Characterization of Hydroxyl-Functionalized Polypropylene (PPOH)-Mesoporous Silica Nanocomposites Using Two-Trace Two-Dimensional (2T2D) Correlation Analysis
  41. Degradation mechanism of carbon fiber-reinforced thermoplastics exposed to hot steam studied by chemical and structural analyses of nylon 6 matrix
  42. Structure−property relationships of polypropylene-based nanocomposites obtained by dispersing mesoporous silica into hydroxyl-functionalized polypropylene. Part 2: Matrix−filler interactions and pore filling of mesoporous silica characterized by evolve...
  43. Structure-property relationships of polypropylene-based nanocomposites obtained by dispersing mesoporous silica into hydroxyl-functionalized polypropylene. Part 1: toughness, stiffness and transparency
  44. Structure-property relationship of toughened polypropylene nanocomposites
  45. Reinforcement mechanism of functionalized polypropylene containing hydroxyl group nanocomposites studied by rheo-optical near-infrared spectroscopy
  46. Direct Power Charge and Discharge Using the Glycolic Acid/Oxalic Acid Redox Couple toward Carbon-Neutral Energy Circulation
  47. All-solid-state lithium–sulfur batteries with three-dimensional mesoporous electrode structures
  48. Highly ductile polypropylene-based nanocomposites by dispersing monodisperse silica nanospheres in functionalized polypropylene containing hydroxyl groups
  49. Hydrogenation of oxalic acid using light-assisted water electrolysis for the production of an alcoholic compound
  50. CO2-free electric power circulation via direct charge and discharge using the glycolic acid/oxalic acid redox couple
  51. Pressureless Bonding by Use of Cu and Sn Mixed Nanoparticles
  52. High-Strength Pressure-Free Bonding Using Cu and Ni-Sn Nanoparticles
  53. Pressure-Free Bonding of Metallic Plates with Ni Affinity Layers Using Cu Nanoparticles
  54. Enhancement of pressure-free bonding with Cu particles by the addition of Cu–Ni alloy nanoparticles
  55. Reaction mechanism of all-solid-state lithium–sulfur battery with two-dimensional mesoporous carbon electrodes
  56. Size- and Shape-Controlled Syntheses of Colloidal Sn, Te, and Bi Nanocrystals
  57. All-solid-state Li–sulfur batteries with mesoporous electrode and thio-LISICON solid electrolyte
  58. Development of Low-Temperature Sintering Cu Nanoparticles
  59. A new one-pot method for the synthesis of Cu nanoparticles for low temperature bonding
  60. Facile control of crystallite size of ZSM-5 catalyst for cracking of hexane
  61. Extension of size of monodisperse silica nanospheres and their well-ordered assembly
  62. Synthesis and application of colloidal nanocrystals of the MFI-type zeolites
  63. All Solid-State Lithium-Sulfur Battery Using Mesosized Electrode Structure and Thio-LISICON
  64. Mechanism of Formation of Uniform-Sized Silica Nanospheres Catalyzed by Basic Amino Acids
  65. All Solid-state Lithium-sulfur Battery Using Meso-sized Electrode Structure
  66. All Solid State Batteries with Meso-sized Electrode Structure using Solid Electrolyte, thio-LISICON
  67. All solid-state battery with sulfur electrode and thio-LISICON electrolyte
  68. Synthesis of well-ordered nanospheres with uniform mesopores assisted by basic amino acids