All Stories

  1. Evolution of microstructure and defects in sintering of tape-cast alumina laminates observed by synchrotron X-ray multiscale tomography

    Article • Ceramics International, April 2024, Elsevier

    Ryo Inoue

  2. Material design using calculation phase diagram for refractory high‐entropy ceramic matrix composites

    Article • International Journal of Applied Ceramic Technology, January 2024, Wiley

    Ryo Inoue

  3. Macroscopic tensile properties of AlxCoCrCuFeNi (x = 0.3 and 1) before and after heat treatment

    Article • Materials Research Express, May 2023, Institute of Physics Publishing

    Ryo Inoue

  4. Static and Fatigue Tensile Properties of Cross-Ply Carbon-Fiber-Reinforced Epoxy-Matrix-Composite Laminates with Thin Plies

    Article • Journal of Composites Science, April 2023, MDPI AG

    Ryo Inoue

  5. 3D Visualization of Morphological Evolution of Large Defects during Spark Plasma Sintering of Alumina Granules

    Article • Advanced Engineering Materials, March 2023, Wiley

    Ryo Inoue

  6. Heterogeneities and defects in powder compacts and sintered alumina bodies visualized by using the synchrotron X-ray CT

    Article • Journal of the European Ceramic Society, February 2023, Elsevier

    Ryo Inoue

  7. Degradation of carbon fiber-reinforced ultra-high-temperature ceramic matrix composites at extremely high temperature using arc-wind tunnel tests

    Article • Journal of Materials Science, October 2022, Springer Science + Business Media

    Ryo Inoue

  8. Characterization of carbon fiber-reinforced ultra-high temperature ceramic matrix composites fabricated via Zr-Ti alloy melt infiltration

    Article • Journal of the European Ceramic Society, October 2022, Elsevier

    Ryo Inoue

  9. Degradation of Yb–Gd–Ti-Si middle entropy silicides in oxidizing atmosphere

    Article • Materials Research Express, May 2022, Institute of Physics Publishing

    Ryo Inoue

  10. Fabrication, microstructure, and mechanical properties of all-oxide ceramic matrix composites using high-yield precursors

    Article • Journal of Materials Science, April 2022, Springer Science + Business Media

    Ryo Inoue

  11. Hot-corrosion of refractory high-entropy ceramic matrix composites synthesized by alloy melt-infiltration

    Article • Ceramics International, November 2021, Elsevier

    Ryo Inoue

  12. Geometric factors affecting Young's modulus of porous carbon with a three‐dimensional network structure

    Article • International Journal of Applied Ceramic Technology, October 2021, Wiley

    Ryo Inoue

  13. Use of Zr–Ti Alloy Melt Infiltration for Fabricating Carbon-Fiber-Reinforced Ultrahigh-Temperature Ceramic Matrix Composites

    Article • Journal of Composites Science, July 2021, MDPI AG

    Ryo Inoue

  14. Environmental effects on degradation behavior in YbGdSi ternary system at elevated temperatures

    Article • Ceramics International, July 2021, Elsevier

    Ryo Inoue

  15. Optical imaging of surface strain distribution up to 1500°C: Development of micro‐speckle pattern

    Article • International Journal of Ceramic Engineering & Science, May 2021, Wiley

    Ryo Inoue

  16. Improvement of the Oxidation Behavior of Yb-Gd-Si Ternary Alloys at Low Temperatures via Ti Addition

    Article • March 2021, Research Square

    Ryo Inoue

  17. Relationship between the microstructures and Young’s modulus of 3D-networked porous carbon material

    Article • Journal of Materials Science, March 2021, Springer Science + Business Media

    Ryo Inoue

  18. Anisotropic crack propagation behavior for the silicon‐bond coat layer in a multilayer coated system

    Article • International Journal of Applied Ceramic Technology, January 2021, Wiley

    Ryo Inoue

  19. Oxidation behavior of ytterbium silicide in air and steam

    Article • Intermetallics, January 2021, Elsevier

    Ryo Inoue

  20. Silicide materials: Thermoelectric, mechanical properties, and durability for Mg-Si and Mn-Si

    Article • January 2021, Elsevier

    Ryo Inoue

  21. Thermal Protection Performance of Polymethylmethacrylate-Impregnated Porous Carbon Materials with Three Different Densities

    Article • Journal of Spacecraft and Rockets, September 2020, American Institute of Aeronautics and Astronautics (AIAA)

    Ryo Inoue

  22. Phase stability of Yb-Gd-Si ternary alloys at elevated temperature

    Article • Journal of Alloys and Compounds, June 2020, Elsevier

    Ryo Inoue

  23. Enhanced evaporation of porous materials with micropores and high porosity

    Article • Journal of Thermal Science and Technology, January 2020, Japan Society of Mechanical Engineers

    Ryo Inoue

  24. Detection of small delamination in mullite/Si/SiC model EBC system by pulse thermography

    Article • Journal of Advanced Ceramics, August 2019, Tsinghua University Press

    Ryo Inoue

  25. Carbon fiber reinforced ultra-high temperature ceramic matrix composites: A review

    Article • Ceramics International, August 2019, Elsevier

    Ryo Inoue

  26. Oxidation and recession of plain weave carbon fiber reinforced ZrB2-SiC-ZrC in oxygen–hydrogen torch environment

    Article • Journal of the European Ceramic Society, August 2019, Elsevier

    Ryo Inoue

  27. Oxidation behavior of ytterbium silicide

    Article • Ceramics International, May 2019, Elsevier

    Ryo Inoue

  28. Mechanical and thermoelectric properties of intragranular SiC- Nanoparticle/Mg2Si composites

    Article • Journal of Alloys and Compounds, February 2019, Elsevier

    Ryo Inoue

  29. Fabrication Procedure for Porous Carbon Material with Three Dimensionally Networked Structure

    Article • January 2019, Wiley

    Ryo Inoue

  30. In situ observation and strain distribution measurements of atmospheric plasma-sprayed mullite and Si multilayered coatings on SiC substrates

    Article • Journal of Materials Science, October 2018, Springer Science + Business Media

    Ryo Inoue

  31. Thermal Protection Performance of Porous Carbon Ablators with Three Different Matrices

    Article • Journal of Spacecraft and Rockets, September 2018, American Institute of Aeronautics and Astronautics (AIAA)

    Ryo Inoue

  32. Development of short- and continuous carbon fiber-reinforced ZrB2-SiC-ZrC matrix composites for thermal protection systems

    Article • Ceramics International, September 2018, Elsevier

    Ryo Inoue

  33. Oxidation of ZrB2 and its composites: a review

    Article • Journal of Materials Science, June 2018, Springer Science + Business Media

    Ryo Inoue

  34. Visualization of Strain in Elastic Silicone Polymers Using Fluorescence Energy Transfer

    Article • Journal of Photopolymer Science and Technology, June 2018, Technical Association of Photopolymers, Japan

    Ryo Inoue

  35. Experimental Investigation and Analysis of Mechanical Properties of Three-Dimensionally Networked Porous Carbon Material

    Article • May 2018, Wiley

    Ryo Inoue

  36. Oxidation behavior of carbon fiber-dispersed ZrB2-SiC-ZrC triple phase matrix composites in an oxyhydrogen torch environment

    Article • Ceramics International, May 2018, Elsevier

    Ryo Inoue

  37. Oxidation behavior of ZrB2-SiC-ZrC in oxygen-hydrogen torch environment

    Article • Journal of the European Ceramic Society, April 2018, Elsevier

    Ryo Inoue

  38. Initial oxidation behaviors of ZrB2-SiC-ZrC ternary composites above 2000 °C

    Article • Journal of Alloys and Compounds, January 2018, Elsevier

    Ryo Inoue

  39. Oxidation behaviors of ZrB 2 –SiC binary composites above 2000 °C

    Article • Ceramics International, August 2017, Elsevier

    Ryo Inoue

  40. Effect of Heat Exposure on the Microstructures and Mechanical Properties of 3Al2 O3 ·2SiO2 /Si/SiC Coating System

    Article • July 2017, Wiley

    Ryo Inoue

  41. Mechanical Properties and Fracture Behavior of Mg2Si after Heat Exposure

    Article • MRS Advances, June 2017, Springer Science + Business Media

    Ryo Inoue

  42. Oxidation behavior of ZrB2-SiC-ZrC at 1700 °C

    Article • Journal of the European Ceramic Society, April 2017, Elsevier

    Ryo Inoue

  43. Molecular dynamics study of the interfacial strength between carbon fiber and phenolic resin

    Article • Advanced Composite Materials, February 2017, Taylor & Francis

    Ryo Inoue

  44. Estimation of the Highest Surface Temperature for CFRP Ablator by Raman Analysis

    Article • TRANSACTIONS OF THE JAPAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES, January 2016, Japan Society for Aeronautical and Space Sciences

    Ryo Inoue

  45. In-situ observation of oxidation behavior in ZrB2–SiC–ZrC ternary composites up to 1500°C using high-temperature observation system

    Article • Journal of the Ceramic Society of Japan, January 2016, Ceramic Society of Japan

    Ryo Inoue

  46. Mode I fracture toughness of short carbon fiber-dispersed SiC matrix composite fabricated by melt infiltration process

    Article • Ceramics International, September 2013, Elsevier

    Ryo Inoue

  47. Quantitative evaluation of toughening mechanisms in abalone nacre

    Article • Journal of the Ceramic Society of Japan, January 2013, Ceramic Society of Japan

    Ryo Inoue

  48. Fabrication of nature-inspired bulk laminar composites by a powder processing

    Article • Composites Science and Technology, January 2010, Elsevier

    Ryo Inoue