Contact

All Stories

  1. Metal foam reinforced phase change material for passive thermal control of multiple electronic components

    Article • International Journal of Thermal Sciences, February 2026, Elsevier

    Prof. Ridha Djebali

  2. Comparative structural and optical investigation of [(CH3)4N]3M2Cl9 (M = Sb, Bi): insights into lead free tetramethylammonium halide perovskites

    Article • Journal of Molecular Structure, December 2025, Elsevier

    Prof. Ridha Djebali

  3. Multi-objective optimization of microporous heat exchangers: A sensitivity analysis and response surface methodology

    Article • Case Studies in Thermal Engineering, September 2025, Elsevier

    Prof. Ridha Djebali

  4. Engineering spinel ferrites via A-site cation Substitution: Structural, electrical, and optical properties for advanced applications

    Article • Ceramics International, August 2025, Elsevier

    Prof. Ridha Djebali

  5. Comprehensive Analysis and Thermo‐Economic Optimization of a Hybrid Phase Change Material‐Based Heat Sink for Electronics Cooling

    Article • Heat Transfer, May 2025, Wiley

    Prof. Ridha Djebali

  6. Three‐Phase PV Pumping System With Advanced Control for Enhanced Efficiency and Robustness: Modeling, Experimental Validation, and Optimization

    Article • International Journal of Circuit Theory and Applications, April 2025, Wiley

    Prof. Ridha Djebali

  7. Thermal performance of MgO-SWCNT/water hybrid nanofluids in a zigzag walled cavity with differently shaped obstacles

    Article • Modern Physics Letters B, April 2025, World Scientific Pub Co Pte Lt

    Prof. Dr. Fateh Mebarek-Oudina, Prof. Ridha Djebali

  8. Analyzing Series Resistance Effects on PV Characteristics and Estimation Using LSTM-EKF

    Article • February 2025, Institute of Electrical & Electronics Engineers (IEEE)

    Prof. Ridha Djebali

  9. Deep Learning Analysis and Numerical Simulation of Exergy and Nanofluid Heat Transfer Efficiency in a Two-Compartment Heat Exchanger with Internal Heat Generation and Baffles

    Article • February 2025, Institute of Electrical & Electronics Engineers (IEEE)

    Prof. Ridha Djebali

  10. Design of Experiments for Heat Transfer Phenomena and Entropy Generation in Thermal Management of Electronic Components

    Article • February 2025, Institute of Electrical & Electronics Engineers (IEEE)

    Prof. Ridha Djebali

  11. Enhancing State of Charge Estimation for Lithium-Ion Batteries in Noisy Environments Using a Hybrid LSTM-EKF Mode

    Article • February 2025, Institute of Electrical & Electronics Engineers (IEEE)

    Prof. Ridha Djebali

  12. Fluid-structure interaction over a backward-facing step equipped with an elastic baffle

    Article • February 2025, Institute of Electrical & Electronics Engineers (IEEE)

    Prof. Ridha Djebali

  13. Heatline Visualization and Entropy Analysis of MHD Conjugate Heat Transfer in a Partitioned Medium Filled with (J5%Ag-85%MgO)/H20 Nanofluid: A Lattice Boltzmann Investigation

    Article • February 2025, Institute of Electrical & Electronics Engineers (IEEE)

    Prof. Ridha Djebali

  14. Integration of Artificial Neural Networks and Process Simulation for Optimizing Direct Current Atmospheric Plasma Spraying of Enhanced Zirconia Coatings

    Article • February 2025, Institute of Electrical & Electronics Engineers (IEEE)

    Prof. Ridha Djebali

  15. Numerical Investigation of the Effect of Storage Tank Orientation on the Melting of Phase Change Material in a Square-Shaped Tank

    Article • February 2025, Institute of Electrical & Electronics Engineers (IEEE)

    Prof. Ridha Djebali

  16. Optimized Energy Management Strategy for Non-Autonomous Microgrids Using Crow Search Optimization

    Article • February 2025, Institute of Electrical & Electronics Engineers (IEEE)

    Prof. Ridha Djebali

  17. Artificial Neural Networks for Optimizing Alumina Al<sub><b>2</b></sub>O<sub><b>3</b></sub> Particle and Droplet Behavior in 12kK Ar-H<sub><b>2</b></sub> Atmospheric Plasma Spraying

    Article • Frontiers in Heat and Mass Transfer, January 2025, Tsinghua University Press

    Prof. Ridha Djebali

  18. Implementing a solid-state synthesis route to tune the functional properties of NaCdP3O9 metaphosphate: optical characteristics, ionic conductivity, and dielectric behavior

    Article • RSC Advances, January 2025, Royal Society of Chemistry

    Prof. Ridha Djebali

  19. Optimization of co-flow micro-heat-exchanger performance using Response Surface Methodology: energy transfer rate and thermodynamic irreversibility

    Article • FME Transaction, January 2025, Centre for Evaluation in Education and Science (CEON/CEES)

    Prof. Ridha Djebali

  20. Numerical and experimental investigation of inlet velocity influence on airflow characteristics for indoor thermal comfort

    Article • Scientia Iranica, September 2024, E-Ilmiah Penerbit Persatuan (E-scholarly Publishers Association)

    Prof. Ridha Djebali

  21. Optimized Model for Heat Transfer and Entropy Generation in Micro-Heat Exchanger Induced by Walls Injection Using Design of Experiments

    Article • Romanian Journal of Physics, May 2024, Editura Academiei Romane

    Prof. Ridha Djebali

  22. Computational and DOE Assessment of Heat Transfer and Thermodynamic Second Law in Closed Medium with Internal Fan

    Article • December 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Prof. Ridha Djebali

  23. Design of Experiments Investigation of Synthetic Jets Cooling Efficiency

    Article • December 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Prof. Ridha Djebali

  24. Heat Transfer and Irreversibility Response Due to Natural Convection in a Micro Partially Porous Cavity: Micro-Electronic Cooling Application

    Article • December 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Prof. Ridha Djebali

  25. Micro Scale Modeling of Heat Transfer and Entropy Generation in a Partially Porous Channel Using Lattice Boltzmann Method and Design of Experiments

    Article • December 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Prof. Ridha Djebali

  26. Thermal Study of Carbon-Fiber-Reinforced Polymer Composites Using Multiscale Modeling

    Article • Materials, November 2023, MDPI AG

    Prof. Ridha Djebali

  27. Assessment of micro-scale heat exchangers efficiency using lattice Boltzmann method and design of experiments

    Article • Energy and Built Environment, June 2023, Elsevier

    Prof. Dr. Fateh Mebarek-Oudina, Prof. Ridha Djebali

  28. CuO–Water MHD Mixed Convection Analysis and Entropy Generation Minimization in Double-Lid–Driven U-Shaped Enclosure with Discrete Heating

    Article • Acta Mechanica et Automatica, February 2023, De Gruyter

    Prof. Ridha Djebali

  29. Appraising heat transfer enhancement by nanofluid and entropy generation minimization in a micro tall cavity: : Magnetic field and sinusoidal heating effects

    Article • December 2022, Institute of Electrical & Electronics Engineers (IEEE)

    Prof. Ridha Djebali

  30. DOE of heat transfer and entropy generation in channel microheat exchanger driven by a coflow

    Article • December 2022, Institute of Electrical & Electronics Engineers (IEEE)

    Prof. Ridha Djebali

  31. Entropy generation of MHD forced convection nanoliquid in a channel containing three cylinder blocks

    Article • December 2022, Institute of Electrical & Electronics Engineers (IEEE)

    Prof. Ridha Djebali

  32. Second Law Analysis of MHD Forced Convective Nanoliquid Flow Through a Two-Dimensional Channel

    Article • Acta Mechanica et Automatica, December 2022, De Gruyter

    Prof. Ridha Djebali

  33. Magnetohydrodynamic (MHD) Convective Nanofluid Flow, Heat Transfer and Irreversibility Analysis in a Horizontal Micro Tall Cavity with Heat Sources in the Slip Regime

    Article • Journal of Nanofluids, August 2022, American Scientific Publishers

    Prof. Ridha Djebali

  34. Magnetohydrodynamic Free Convection Through Entropy Generation Scrutiny of Eco-Friendly Nanoliquid in a Divided L-Shaped Heat Exchanger with Lattice Boltzmann Method Simulation

    Article • Journal of Nanofluids, February 2022, American Scientific Publishers

    Prof. Dr. Fateh Mebarek-Oudina, Prof. Ridha Djebali

  35. Similarity solution analysis of dynamic and thermal boundary layers: further formulation along a vertical flat plate

    Article • Physica Scripta, May 2021, Institute of Physics Publishing

    Prof. Dr. Fateh Mebarek-Oudina, Mr Rajashekhar Choudhari, Prof. Ridha Djebali

  36. MHD conjugate heat transfer and entropy generation analysis of MWCNT/water nanofluid in a partially heated divided medium

    Article • Heat Transfer, November 2020, Wiley

    Prof. Ridha Djebali

  37. Appraising conjugate heat transfer, heatlines visualization and entropy generation of Ag-MgO/H2O hybrid nanofluid in a partitioned medium

    Article • International Journal of Numerical Methods for Heat & Fluid Flow, January 2020, Emerald

    Prof. Ridha Djebali

  38. Accurate LBM appraising of pin-fins heat dissipation performance and entropy generation in enclosures as application to power electronic cooling

    Article • International Journal of Numerical Methods for Heat & Fluid Flow, August 2019, Emerald

    Prof. Ridha Djebali

  39. Conjugate natural heat transfer scrutiny in differentially heated cavity partitioned with a conducting solid using the lattice Boltzmann method

    Article • Journal of Thermal Analysis and Calorimetry, May 2019, Springer Science + Business Media

    Prof. Ridha Djebali

  40. LBM simulation of free convection in a nanofluid filled incinerator containing a hot block

    Article • International Journal of Mechanical Sciences, November 2018, Elsevier

    Prof. Ridha Djebali

  41. LBM simulation of free convection in a nanofluid filled incinerator containing a hot block

    Article • International Journal of Mechanical Sciences, May 2018, Elsevier

    Prof. Ridha Djebali

  42. EFFECTS OF HEATER DIMENSIONS ON NANOFLUID NATURAL CONVECTION IN A HEATED INCINERATOR SHAPED CAVITY CONTAINING A HEATED BLOCK

    Article • Journal of Thermal Engineering, March 2018, Journal of Thermal Engineering

    Prof. Ridha Djebali

  43. A Lattice Boltzmann Model for the Simulation of Flows and Heat Transfer at Very High Temperature: A Dynamic Framework of Conversion to Physical Space with Test Cases

    Article • January 2018, Springer Science + Business Media

    Prof. Ridha Djebali

  44. A Confrontation of Lattice Boltzmann, Finite Difference and Taguchi Experimental Design Results for Optimizing Plasma Spraying Operating Conditions Toward Deposit Requirements

    Article • International Journal of Energy Optimization and Engineering, October 2017, IGI Global

    Prof. Ridha Djebali

  45. OPTIMIZATION STUDY OF THE OPERATING CONDITIONS TO IMPROVE THE QUALITY OF SURFACES COATING OBTAINED BY PLASMA SPRAYING PROCESS

    Article • Journal of Thermal Engineering, July 2017, Journal of Thermal Engineering

    Prof. Ridha Djebali

  46. Finite Elements Multiphysics Investigation of Thermoelectric Systems for Electricity and Cooling Generation

    Article • International Journal of Modern Studies in Mechanical Engineering, January 2017, ARC Publications Pvt Ltd.

    Prof. Ridha Djebali

  47. Corrigendum to ‘Scrutiny of plasma spraying complexities with case study on the optimized conditions toward coating process control’ [CSITE 6C (2015) 171–181]

    Article • Case Studies in Thermal Engineering, September 2016, Elsevier

    Prof. Ridha Djebali

  48. Conjugate Effects of Buoyancy and Magnetic Field on Heat and Fluid Flow Pattern at Low-to-Moderate Prandtl Numbers

    Article • International Letters of Chemistry Physics and Astronomy, May 2016, SciPress Ltd

    Prof. Ridha Djebali

  49. Some advances on optimizing plasma spraying conditions toward process control

    Article • March 2016, Institute of Electrical & Electronics Engineers (IEEE)

    Prof. Ridha Djebali

  50. Scrutiny of spray jet and impact characteristics under dispersion effects of powder injection parameters in APS process

    Article • International Journal of Thermal Sciences, February 2016, Elsevier

    Prof. Ridha Djebali

  51. Scrutiny of plasma spraying complexities with case study on the optimized conditions toward coating process control

    Article • Case Studies in Thermal Engineering, September 2015, Elsevier

    Prof. Ridha Djebali

  52. finite volume method, nanofluid, forced convection

    Article • Applied Mathematical Modelling, July 2015, Elsevier

    Prof. Ridha Djebali

  53. York platelet syndrome is a CRAC channelopathy due to gain-of-function mutations in STIM1

    Article • Molecular Genetics and Metabolism, March 2015, Elsevier

    Prof. Ridha Djebali

  54. Investigating Plasma Jets Behavior using Axisymmetric Lattice Boltzmann Model under Temperature Dependent Viscosity

    Article • Communications in Computational Physics, March 2014, Global Science Press

    Prof. Ridha Djebali

  55. A lattice Boltzmann based investigation of powder in-flight characteristics during APS process, part II: Effects of parameter dispersions at powder injection

    Article • Surface and Coatings Technology, April 2013, Elsevier

    Prof. Ridha Djebali

  56. A lattice Boltzmann-based investigation of powder in-flight characteristics during APS process, part I: modelling and validation

    Article • Progress in Computational Fluid Dynamics An International Journal, January 2012, Inderscience Publishers

    Prof. Ridha Djebali

  57. Simulation and Modeling of Turbulent Plasma Jet Based on Axisymetric LBGK Model

    Article • Defect and Diffusion Forum, April 2011, Trans Tech Publications

    Prof. Ridha Djebali

  58. Some Advances in Applications of Lattice Boltzmann Method for Complex Thermal Flows

    Article • Advances in Applied Mathematics and Mechanics, June 2010, Global Science Press

    Prof. Ridha Djebali

  59. Aptitude of a lattice Boltzmann method for evaluating transitional thresholds for low Prandtl number flows in enclosures

    Article • Comptes Rendus Mécanique, February 2010, Elsevier

    Prof. Ridha Djebali

  60. Investigation of a side wall heated cavity by using lattice Boltzmann method

    Article • European Journal of Computational Mechanics, January 2009, River Publishers

    Prof. Ridha Djebali