All Stories

  1. Designing, parametrizing, iteratively optimizing the aerodynamic geometry of a 3D racecar in CFD.
  2. WUADS – A Model Based Conceptual Design Tool for the Development of Efficient Commercial Aircraft
  3. Implementation, Verification, and Validation, of the Wray-Agarwal Turbulence Model in SU2
  4. Multi-Fidelity Conceptual Design and Optimization of Low Boom Supersonic Transport Aircraft
  5. Validation of the Wray-Agarwal Algebraic Transition Model in SU2
  6. Application and Evaluation of the Wray-Agarwal Turbulence Model with Compressibility Corrections in SU2 for RANS Hypersonic Flow Prediction
  7. Application of a Co-Flow Jet Airfoil in Development of a Transonic-Truss Braced Wing
  8. High Fidelity CFD Verification Workshop 2024 Test Case: Transonic Turbulent Flow in Sajben Diffuser
  9. Study on the particle dynamic characteristics in a centrifugal pump based on an improved computational fluid dynamics-discrete element model
  10. Experimental study on the unsteady evolution mechanism of centrifugal pump impeller wake under solid–liquid two-phase conditions: Impact of particle concentration
  11. Application of Wray-Agarwal Algebraic Transition Model to 2D Asymmetric Airfoils
  12. Simulation of High-Speed Cold Wall Flow With Various Turbulence Models Including the Wray-Agarwal Model
  13. Evaluation of Various Turbulence Models for Turbulent Separated Flow Over a Model Two-dimensional Bump
  14. Design and Analysis of a Short to Mid-Range Hydrogen Fuel Cell Powered Commercial Aircraft
  15. Energy dissipation mechanism of tip-leakage cavitation in mixed-flow pump blades
  16. Vortex dynamics characteristics in the tip region based on Wray–Agarwal model
  17. Computational Analysis of the HIFiRE-1 Hypersonic Test Model in ANSYS Fluent
  18. Evaluation of Various Turbulence Models for Prediction of Wing-Body Juncture Flow
  19. Experimental Results of a Straight Tapered Flying Wing with Bell-Shaped Lift Distribution
  20. New aircraft designs and technologies for Zero Emission Aviation
  21. Automated Vortex Lattice Method Based Design Optimization of a Hydrogen Powered Aircraft
  22. Development of a Liquid Hydrogen Combustion High Bypass Geared Turbofan Model in NPSS
  23. Application of Wray-Agarwal Turbulence Model for Predicting Flow past NACA 0012, 0015, and 0018 Airfoils
  24. Comparison and validation of various turbulence models for U-bend flow with a magnetic resonance velocimetry experiment
  25. Numerical Analysis of JAXA Standard Model in High Lift Configuration
  26. Performance Study of a Tapered Flying Wing with Bell-Shaped Lift Distribution
  27. Modified Nonlinear Coupled Constitutive Relations Model for Hypersonic Nonequilibrium Flows
  28. Numerical Simulations of a Sweeping Jet Actuator (Invited)
  29. Application of Quadratic Constitutive Relation to One-Equation k-kL Turbulence Model
  30. CFD Modeling of a Vertical Axis Wind Turbine using Actuator Cylinder Theory
  31. Development and Validation of an Elliptic Blending Lag SST k-ωTurbulence Model
  32. Numerical Simulation of Fountain formation due to Normal and Inclined Twin-Jet impingement on Ground
  33. Numerical Investigation of Wind Turbine Airfoils under Clean and Dusty Air Conditions
  34. Numerical Simulation of Particle Trapping in Laminar and Turbulent T-Junction Flows
  35. Study of Round Jet Impingement in Proximity of Ground and Water Surface
  36. Numerical Simulation of Fountain formation due to Twin-Jet impingement on Ground
  37. Development of a One-Equation Algebraic Reynolds Stress Model based on k-kL Closure
  38. Development of a Transition Model Based on One-Equation k-? Closure
  39. CFD Simulations of a Triangular Airfoil for Martian Atmosphere in Low-Reynolds Number Compressible Flow
  40. Evaluation of Various RANS Turbulence Models for Predicting the Drag on an Ahmed Body
  41. Numerical Analysis of Propeller-Wing Interaction in Aircraft with Distributed Electric Propulsion
  42. CO2 sequestration with enhanced shale gas recovery
  43. Application of the WA-? Transition Model for Flow past a Circular Arc
  44. Numerical Simulation of Incipient Rotating Stall Characteristics in a Mixed-Flow Pump
  45. Numerical Simulation of the Cavitation Flow around a Hydrofoil Based on a Coupled CFD-PBM Model
  46. A New Extension of Wray-Agarwal Wall Distance Free Turbulence Model to Rough Wall Flows
  47. A New One Equation Turbulence Model Based on k-? Closure with Elliptic Blending
  48. A One-Equation Turbulence Model Based on k-kL Closure
  49. Numerical Study on Aerodynamics and Flow Physics of a Flapping Wing Hovering in Ground Effect
  50. Computational Fluid Dynamics Analysis of Inverted Multi-Element Airfoils in Ground Effect
  51. Numerical Study of a Hovering Helicopter Rotor Blade in Ground Effect
  52. Conceptual and Numerical Analysis of Active Wingtip Vortex Cancellation in Propeller-Driven Electric Aircraft
  53. Modification of Wray-Agarwal Transition Model for Computing Rough Wall Flows
  54. Applications of a DES Model Based on Wray-Agarwal Turbulence Model with Rotation and Curvature Correction
  55. Effects of rarefaction and thermal non-equilibrium on a blunt body and a bicone in hypersonic flow and their shape optimization for reducing both drag and heat transfer
  56. Computations of rarefied hypersonic blunt body flow in binary inert gas mixtures using the generalized Boltzmann equation
  57. Aerodynamics of a Transonic Airfoil in Ground Effect
  58. Simulation of Water Spray Generated by Pneumatic Aircraft Tire on Flooded Runway
  59. Effect of Nonuniform Tip Clearance on the Performance of Transonic Axial Compressors
  60. Iterative Filter with Finite Measurements for Suddenly Maneuvering Targets
  61. Numerical Simulation of Aircraft Tire-Generated Spray and Engine Ingestion on Flooded Runways
  62. Computation of Flow Field of an Airfoil with Gurney Flap in Ground Effect
  63. Numerical Study of Fuselage Aerodynamics of DLR-F6 Wing-Body in Ground Effect
  64. Drag Prediction of NASA Common Research Models Using Different Turbulence Models
  65. CFD Analysis of Tandem Wind Turbines Using a Rotating Actuator Disk Model
  66. Application of a New DES Model Based on Wray-Agarwal Turbulence Model for Simulation of Wall-Bounded Flows with Separation
  67. Application of SST k-ω Transition Model to Flow Past Smooth and Rough Airfoils
  68. Ground Effect Aerodynamics of a Flapping Airfoil in Hover
  69. Aerodynamics of a Flapping Airfoil in Forward Flight in Proximity of Ground
  70. Aerodynamics of a Transonic Airfoil in Ground Effect
  71. Numerical Simulation of Flow Past a Circular and a Square Cylinder at High Reynolds Number
  72. Detached Eddy Simulation of Far-Field Wake Vortex in Static and Mutational Ground Effects
  73. Aerodynamics of an Airfoil in Dynamic Ground Effect during Take-Off
  74. Numerical Study of Evolution of Air Pockets during Water Impact of a Flat-Bottom Structure
  75. Numerical Simulation of a Droplet Impacting upon Films with Varied Liquid Properties
  76. Transient Deformation and Breakup of a Droplet in Confined Shear Flow
  77. Numerical Study of the Aerodynamics of DLR-F6 Wing-Body in Unbounded Flow Field and in Ground Effect
  78. Numerical Study of Radial Deformation and Energy Conversion in Head-on Collision of Two Equal-size Droplets
  79. Computation of Rarefaction Effects on a Blunt Body in Hypersonic Flow
  80. One-equation turbulence model
  81. A New DES Model Based on Wray-Agarwal Turbulence Model for Simulation of Wall Boundeed Flows
  82. Turbulence Modeling of High Speed Compressible Flows
  83. Prediction, Minimization and Propagation of Sonic Boom from Supersonic Bodies
  84. Hypersonic Blunt-Body Shape Optimization for Reducing Drag and Heat Transfer
  85. Computational Fluid Dynamics
  86. Numerical Study of Water Impact of an Elastic Cylindrical Shell
  87. Uncertainty Quantification of Turbulence Model Coefficients in OpenFOAM and Fluent for Mildly Separated Flows
  88. Numerical Investigation of the Aerodynamics of an Inverted Three-Element Airfoil in Ground Effect for Race Car Application
  89. A Numerical Study of Transient Deformation and Drag Properties of Accelerating and Decelerating Liquid Drops
  90. Numerical Study of Aerodynamics and Flow Physics of the 30P30N Three-Element Airfoil in Dynamic Ground Effect
  91. Development of a One-Equation Turbulence Model based on Epsilon-Equation
  92. Application of the Wray-Agarwal Model to Compressible Flows
  93. Evaluation of Six Turbulence Models for Accurate Numerical Simulation of 2D Slot Nozzle Ejector
  94. Validation of the Wray-Agarwal Turbulence Model for Shock-Wave Boundary Layer Interaction Flows
  95. Application of the Quadratic Constitutive Relation to Various Turbulence Models in OpenFOAM
  96. Application of a New Simple Rotation and Curvature Correction to the Wray-Agarwal Turbulence Model
  97. CFD Performance of Turbulence Models for Flow from Supersonic Nozzle Exhausts
  98. Shape Optimization of Supersonic Bodies to Reduce Sonic Boom Signature
  99. Numerical Study of Transient Deformation and Drag Characteristics of a Decelerating Droplet
  100. Numerical Study of Water Impact of an Elastic Cylindrical Shell Using Coupled FVM-FEM Method
  101. Entropy Production Analysis of Burnett Equations Using Classical Thermodynamics with Gibbs Equations
  102. A New DES Model Based on Wray-Agarwal Turbulence Model for Simulation of Wall-Bounded Flows
  103. Flow Physics of a Multi-Element Airfoil in Ground Effect
  104. Computation of Turbulent Flow in a Lid-Driven 2D Cavity and a 3D Box Using a Number of Turbulence Models
  105. Improved low-Reynolds-number one-equation turbulence model
  106. Numerical Simulation of Water-Landing Performance of a Regional Aircraft
  107. Near-field Wingtip Vortex Characteristics of a Rectangular Wing in Ground Effect
  108. Shape Optimization of a Blunt Body in Hypersonic Rarefied and Reacting Flow for Reducing Both Drag and Heat Transfer
  109. Numerical Simulation of Water Spray Caused by a Rolling Airplane Tire
  110. Wall-Distance-Free Version of Spalart–Allmaras Turbulence Model
  111. Numerical Investigation of the Aerodynamics of an Airfoil in Mutational Ground Effect
  112. Study of Ditching Characteristics of Transport Aircraft by Global Moving Mesh Method
  113. Computation of Flow in S Ducts with Wray–Agarwal One-Equation Turbulence Model
  114. Low-Reynolds-Number One-Equation Turbulence Model Based on k-ω Closure
  115. Numerical Simulation of Water Spray Caused by a Rolling Airplane Tire
  116. CFD Analysis of Counter-Rotating Open Rotors Using a Rotating Actuator Disk Model
  117. Numerical Study of the Transient Deformation and Drag Characteristics of a Decelerating Droplet
  118. Extension of Wray-Agarwal Turbulence Model for Flow Over Rough Surfaces
  119. An Improved Version of One-Equation RAS Turbulence Model
  120. Shape Optimization of a Blunt Body in Reacting Hypersonic flow in Thermal Non-Equilibrium for Reducing Both Drag and Heat Transfer
  121. Application of the Wray-Agarwal Model to Compressible Flows
  122. Computation of Rarefied Hypersonic Flows Using Modified Form of Conventional Burnett Equations
  123. Computational Fluid Dynamics Analysis of Open-Rotor Engines Using an Actuator Disk Model
  124. Airfoil Aerodynamics in Ground Effect for Wide Range of Angles of Attack
  125. Numerical Investigation of the Aerodynamics of an Airfoil in Mutational Ground Effect
  126. Aerodynamics and Flow Mechanics of a Two-Element Airfoil in Ground Effect
  127. Shape Optimization of an Airfoil in Ground Effect for Application to WIG Craft
  128. Wall - Distance - Free Modifications to Spalart - Allmaras Turbulence Model
  129. Numerical Study of Ditching Characteristics of a Transport Aircraft by Global Moving Mesh
  130. Computation of Rarefied Hypersonic Flows Using a Modified Form of the Conventional Burnett Equations
  131. Shape Optimization of Axisymmetric Bodies in Hypersonic Flow for Reducing Drag and Heat Transfer
  132. Evaluation of Five Turbulence Models for Accurate Numerical Simulation of 2D Slot Nozzle Ejector
  133. Application of a New One-Equation Turbulence Model Based on k-ω Closure to Flow in S-Ducts
  134. Numerical Investigation of the Aerodynamics of a Delta Wing in Ground Effect
  135. Simulation of Secondary and Separated Flow in Diffusing S Ducts
  136. Numerical Simulation of the Flowfield of an Airfoil in Dynamic Ground Effect
  137. Numerical Study of Three-Stream Nozzle Exhaust Flow From a Simplified Model of a Turbofan Nacelle
  138. A New Low Reynolds Number One-Equation Turbulence Model Based on a k-k-ω Closure
  139. Numerical Investigation of the Aerodynamics of a Delta Wing in Ground Effect
  140. Shape Optimization of NREL S809 Airfoil for Wind Turbine Blades Using a Multi-Objective Genetic Algorithm
  141. Inclusion of a Simple Dynamic Inflow Model in the Blade Element Momentum Theory for Wind Turbine Application
  142. Formulation of a New Set of Simplified Conventional Burnett Equations for Computation of Rarefied Hypersonic Flows
  143. Improvements to Rahman-Agarwal-Siikonen One-Equation Turbulence Model Based on k-epsilon[|#15#|] Closure
  144. CFD Analysis of Open Rotor Engines Using an Actuator Disk Model
  145. Simulation of Secondary and Separated Flow in a Diffusing S-Duct
  146. Aerodynamics and Flow Physics of a NACA 4412 Airfoil in Dynamic Ground Effect
  147. Numerical Simulations of Newtonian and Non-Newtonian Fluids on GPU
  148. The Effect of First- and Second-Order Slip Condition on Oscillatory Flows: Several Exact Solutions