All Stories

  1. Dual doped graphene-based electrode materials for energy devices
  2. Recent advances in TiO2 nanotube arrays-based composite for photoelectrochemical water splitting and environmental remediation
  3. MXene-Reinforced 3D-Printed Biomatrices: Synthesis, Characterization, and Intelligent Theragenerative Applications
  4. BiVO4-graphene nanocomposites: Recent progress toward photocatalytic environmental remediation of pollutants
  5. Emerging trends in rare-earth doped luminescent nanophosphors: Synthesis, advances and applications
  6. Recent advances in carbon-based materials for supercapacitors: synthesis, electrochemical properties, and impact of machine learning
  7. Integrative defect engineering and NiCo-LDH decoration of W-doped BiVO4: A high-performance photoanode for efficient photoelectrochemical water splitting
  8. Recent advances in nanostructured carbon-based SERS: From zero- to two-dimensional materials for detection of toxic environmental pollutants and health concerns
  9. Recent advancements in rare-earth elements-based oxides, sulfides, selenides, tellurides, and related composites for supercapacitor applications
  10. Advancements in hexaferrite composite materials for electromagnetic interference shielding solutions
  11. Advancements in fabrication, polymorph diversity, heterostructure excitation dynamics, and multifunctional applications of leading 2D-transition metal dichalcogenides
  12. Recent development of MXenes and their composites in electrochemical energy storage: Current status, challenges and future prospects
  13. Low-value biomass-derived carbon composites for electromagnetic wave absorption and shielding: A review
  14. Exploring a solid polymorphism and phase transitions in 4-cyano-4′-pentylbiphenyl (5CB) and rGO-doped 5CB using temperature dependent Raman spectroscopy
  15. Rapid in-situ fabrication of MnSnO3 perovskite-based nanocomposites via microwave-assisted approach for supercapacitor devices
  16. Microwave irradiation-induced palladium nanoparticle-mediated perforation and decoration of reduced graphene oxide nanosheets composite for electrode in supercapacitors
  17. Electromagnetic irradiation-assisted synthesis, exfoliation and modification of graphene-based materials for energy storage and sensing applications
  18. Non-Ti MXene: An emerging class of 2D materials for non-Li batteries
  19. Microwave-assisted synthesis of perovskite hydroxide-derived Co3O4/SnO2/reduced graphene oxide nanocomposites for advanced hybrid supercapacitor devices
  20. Laser-induced and catalyst-free formation of graphene materials for energy storage and sensing applications
  21. Heteroatom doping in 2D MXenes for energy storage/conversion applications
  22. Effect of reduced graphene oxide on the structural, optical, and power conversion efficiency of ZnO thin film-based dye-sensitized solar cells
  23. Ion irradiation/implantation induced defect engineering and modification in graphene derivatives-based nanocomposites: Energy storage/conversion and sensor
  24. Microwave-aided ultra-fast synthesis of Fe3O4 nanoparticles attached reduced graphene oxide edges as electrode materials for supercapacitors
  25. Synthesis and structural, magnetic, and catalytic characteristics Ag–Cr doped Zn nanoferrite series for dye degradation utilizing advanced oxidation processes
  26. Polyacrylonitrile as a versatile matrix for gold nanoparticle-based SERS substrates
  27. Two-dimensional layered rGO-MoS2 heterostructures decorated with Fe3O4 nanoparticles as an electrochemical sensor for detection of para-nitrophenol
  28. Effect of Reduced Graphene Oxide on the Structural, Optical, and Power Conversion Efficiency of Zno Thin Film-Based Dye Solar Sensitized Cells
  29. Microwave-Assisted Synthesis of Perovskite Hydroxide-Derived Co3o4/Sno2/Reduced Graphene Oxide Nanocomposites for Advanced Hybrid Supercapacitor Devices
  30. Recent advances in synthesis of metal-organic frameworks (MOFs)-derived metal oxides and its composites for electrochemical energy storage applications
  31. Graphene-metal oxide hybrid materials with 2D and 3D morphologies for advanced supercapacitor electrodes: Status, challenges and prospects
  32. Poly(vinylidene fluoride‐hexafluoropropylene)/mesoporous graphitic carbon nitride composite membranes for photocatalytic methylene blue degradation and sensing applications
  33. Investigations on dielectric and mechanical properties of poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP)/single-walled carbon nanotube composites
  34. Graphene-based materials for biotechnological and biomedical applications: Drug delivery, bioimaging and biosensing
  35. Cutting edge composite materials based on MXenes: Synthesis and electromagnetic interference shielding applications
  36. Thermal-assisted synthesis of reduced graphene oxide-embedded Ni nanoparticles as high-performance electrode material for supercapacitor
  37. Microwave-assisted dry synthesis of hybrid electrode materials for supercapacitors: Nitrogen-doped rGO with homogeneously dispersed CoO nanocrystals
  38. Polyacrylonitrile/N-doped graphene quantum dots nanocomposite activity as SERS nanosensors for detection of methylene blue
  39. Surface-modification of silver nanoparticle–based polydimethylsiloxane composite for fabrication of strain sensor
  40. Recent advances in modification of novel carbon-based composites: Synthesis, properties, and biotechnological/ biomedical applications
  41. Composites based on layered materials for absorption of microwaves and electromagnetic shielding
  42. Electrochemical investigation of Ag mixed Cd–Cu nanoferrite mixed reduced graphene oxide as improved platform for supercapacitor application
  43. Development of polybenzimidazole modification with open-edges/porous-reduced graphene oxide composite membranes for excellent stability and improved PEM fuel cell performance
  44. Synthesis of reduced graphene oxide-molybdenum disulfide nanocomposite as potential scaffold for fabrication of efficient hydrazine sensor
  45. Carbon-Based Nanomaterials: Carbon Nanotube, Fullerene, and Carbon Dots
  46. Laser as a Tool for Fabrication of Supercapacitor Electrodes
  47. Vacancy designed 2D materials for electrodes in energy storage devices
  48. Two-dimensional layered reduced graphene oxide-tungsten disulphide nanocomposite for highly sensitive and selective determination of para nitrophenol
  49. Anthropogenic greenhouse CO2 gas sensor based on glassy carbon modified with organoclay/ polypyrrole-alginate nanocomposites in brackish water and seawater
  50. Microwave-assisted synthesis of iron oxide homogeneously dispersed on reduced graphene oxide for high-performance supercapacitor electrodes
  51. Electrophoretic Deposition of Graphene Oxide and Reduced Graphene Oxide on the Rutile Phase of TiO2 Nanowires for Rapid Reduction of Cr (VI) under Simulated Sunlight Irradiation
  52. Recent development of graphene-based composite for multifunctional applications: energy, environmental and biomedical sciences
  53. Two-dimensional layered molybdenum disulfide (MoS2)-reduced graphene oxide (rGO) heterostructures modified with Fe3O4 for electrochemical sensing of epinephrine
  54. Microwave-assisted facile synthesis of layered reduced graphene oxide-tungsten disulfide sandwiched Fe3O4 nanocomposite as effective and sensitive sensor for detection of dopamine
  55. A review on the current research on microwave processing techniques applied to graphene-based supercapacitor electrodes: An emerging approach beyond conventional heating
  56. An overview of recent progress in nanostructured carbon-based supercapacitor electrodes: From zero to bi-dimensional materials
  57. Electrochemical deposition of uniform and porous Co–Ni layered double hydroxide nanosheets on nickel foam for supercapacitor electrode with improved electrochemical efficiency
  58. Laser processing of graphene and related materials for energy storage: State of the art and future prospects
  59. In situ growth of laser-induced graphene micro-patterns on arbitrary substrates
  60. Advances in pseudocapacitive and battery-like electrode materials for high performance supercapacitors
  61. Recent progress on polyvinylidene difluoride-based nanocomposites: applications in energy harvesting and sensing
  62. Development of Polybenzimidazole Modification with Open-Edges/Porous-Reduced Graphene Oxide Composite Membranes for Excellent Stability and Improved Pem Fuel Cell Performance
  63. Three dimensional flow over elliptic cylinders arrays in octagonal arrangement
  64. Microwave as a Tool for Synthesis of Carbon-Based Electrodes for Energy Storage
  65. Heteroatom doping of 2D graphene materials for electromagnetic interference shielding: a review of recent progress
  66. Microwave-assisted thin reduced graphene oxide-cobalt oxide nanoparticles as hybrids for electrode materials in supercapacitor
  67. Tunable optical and electrical properties of p-type Cu2O thin films
  68. Recent progress on carbon-based composite materials for microwave electromagnetic interference shielding
  69. Study of Small Polaronic, Variable Hopping Conduction and Its Exploration By Impedance Analysis in I- Substituted CaCu3Ti4O12 at O- Ion Site By Fine-Tuning The Electrical Properties, Grains and Grain Boundaries
  70. Hydrogen gas sensing properties of microwave-assisted 2D Hybrid Pd/rGO: Effect of temperature, humidity and UV illumination
  71. A review of the microwave-assisted synthesis of carbon nanomaterials, metal oxides/hydroxides and their composites for energy storage applications
  72. LARGE EDDY SIMULATION OF FLOW OVER ELLIPTIC CYLINDER ARRAY IN SQUARE CONFIGURATION AT SUBCRITICAL REYNOLDS NUMBERS
  73. Investigation on influence of thickness variation effect of TiO2 film, spacer and counter electrode for improved dye-sensitized solar cells performance
  74. Nanocomposite matrix conjugated with carbon nanomaterials for photocatalytic wastewater treatment
  75. Cutting edge development on graphene derivatives modified by liquid crystal and CdS/TiO2 hybrid matrix: optoelectronics and biotechnological aspects
  76. Inner cover - Rajesh Kumar et al.
  77. One-pot synthesis of reduced graphene oxide nanosheets anchored ZnO nanoparticles via microwave approach for electrochemical performance as supercapacitor electrode
  78. Honeycomb-like open-edged reduced-graphene-oxide-enclosed transition metal oxides (NiO/Co3O4) as improved electrode materials for high-performance supercapacitor
  79. Superior performance of Ni(OH)2-ErGO@ NF electrode materials as pseudocapacitance using electrochemical deposition via two simple successive steps
  80. Fe3O4-embedded rGO Composites as Anode for Rechargeable FeOx-Air Batteries
  81. Synthesis, structural analysis, upconversion luminescence and magnetic properties of Ho3+/Yb3+ co-doped GdVO4 nanophosphor
  82. Large eddy simulation of flow over square cylinder arrays in an octagonal configuration at subcritical Reynolds numbers
  83. Heteroatom doped graphene engineering for energy storage and conversion
  84. One step synthesis Pd/NiO@rGO/CNTs nanocomposite for energy storage as supercapacitor application
  85. Microwave-assisted synthesis of Mn3O4-Fe2O3/Fe3O4@rGO ternary hybrids and electrochemical performance for supercapacitor electrode
  86. Facile synthesis of highly fluorescent free-standing films comprising graphitic carbon nitride (g-C3N4) nanolayers
  87. Hybrid two-dimensional nanostructured hydrogen gas sensors
  88. Synthesis of mesoporous Co(OH)2 nanostructure film via electrochemical deposition using lyotropic liquid crystal template as improved electrode materials for supercapacitors application
  89. Recent progress in the synthesis of graphene and derived materials for next generation electrodes of high performance lithium ion batteries
  90. Facile in-situ simultaneous electrochemical reduction and deposition of reduced graphene oxide embedded palladium nanoparticles as high performance electrode materials for supercapacitor with excellent rate capability
  91. Graphene, h-BN and MoS2 for energy storage applications
  92. Nitrogen-Sulfur Co-Doped Reduced Graphene Oxide-Nickel Oxide Nanoparticle Composites for Electromagnetic Interference Shielding
  93. Progress in microwave-assisted synthesis of quantum dots (graphene/carbon/semiconducting) for bioapplications: a review
  94. Fabrication and electrochemical evaluation of micro-supercapacitors prepared by direct laser writing on free-standing graphite oxide paper
  95. Homogeneous reduced graphene oxide supported NiO-MnO2 ternary hybrids for electrode material with improved capacitive performance
  96. Facile and fast microwave-assisted formation of reduced graphene oxide-wrapped manganese cobaltite ternary hybrids as improved supercapacitor electrode material
  97. Graphene Functionalization Strategies
  98. Microwave-Assisted Modification of Graphene and Its Derivatives: Synthesis, Reduction and Exfoliation
  99. Antimicrobial Activities of Graphene–Polymer Nanocomposites
  100. Graphene Oxide for Drug Delivery and Cancer Therapy
  101. Self-assembled nanostructures of 3D hierarchical faceted-iron oxide containing vertical carbon nanotubes on reduced graphene oxide hybrids for enhanced electromagnetic interface shielding
  102. Rapid and controllable synthesis of Fe3O4 octahedral nanocrystals embedded-reduced graphene oxide using microwave irradiation for high performance lithium-ion batteries
  103. Recent advances in the synthesis and modification of carbon-based 2D materials for application in energy conversion and storage
  104. Graphene/Graphene Oxide and Carbon Nanotube Based Sensors for the Determination and Removal of Bisphenols
  105. Functionalized Nanosize Graphene and Its Derivatives for Removal of Contaminations and Water Treatment
  106. Surface modification of aligned TiO2 nanotubes by Cu2O nanoparticles and their enhanced photo electrochemical properties and hydrogen generation application
  107. Microwave-assisted synthesis of palladium nanoparticles intercalated nitrogen doped reduced graphene oxide and their electrocatalytic activity for direct-ethanol fuel cells
  108. Graphene oxide: An efficient material and recent approach for biotechnological and biomedical applications
  109. Simple and Fast Approach for Synthesis of Reduced Graphene Oxide-MoS₂ Hybrids for Room Temperature Gas Detection
  110. Facile and single step synthesis of three dimensional reduced graphene oxide-NiCoO 2 composite using microwave for enhanced electron field emission properties
  111. Direct laser writing of micro-supercapacitors on thick graphite oxide films and their electrochemical properties in different liquid inorganic electrolytes
  112. Synthesis of self-assembled and hierarchical palladium-CNTs-reduced graphene oxide composites for enhanced field emission properties
  113. Laser-assisted synthesis, reduction and micro-patterning of graphene: Recent progress and applications
  114. Self-Assembled and One-Step Synthesis of Interconnected 3D Network of Fe3O4/Reduced Graphene Oxide Nanosheets Hybrid for High Performance Supercapacitor Electrode
  115. Controlled density of defects assisted perforated structure in reduced graphene oxide nanosheets-palladium hybrids for enhanced ethanol electro-oxidation
  116. Synthesis of reduced graphene oxide nanosheet-supported agglomerated cobalt oxide nanoparticles and their enhanced electron field emission properties
  117. Microwave heating time dependent synthesis of various dimensional graphene oxide supported hierarchical ZnO nanostructures and its photoluminescence studies
  118. Synthesis of self-aligned and vertically oriented carbon incorporated titania nanotube for improved photoelectrochemical hydrogen generation
  119. Enhanced magnetic performance of iron oxide nanoparticles anchored pristine/ N-doped multi-walled carbon nanotubes by microwave-assisted approach
  120. Reply to “Comment on ‘Nanohole-Structured and Palladium-Embedded 3D Porous Graphene for Ultrahigh Hydrogen Storage and CO Oxidation Multifunctionalities’”
  121. Mechanical pressure induced chemical cutting of boron nitride sheets into boron nitride quantum dots and optical properties
  122. Natural and waste hydrocarbon precursors for the synthesis of carbon based nanomaterials: Graphene and CNTs
  123. Synthesis, Characterization, and Tribological Evaluation of TiO2-Reinforced Boron and Nitrogen co-Doped Reduced Graphene Oxide Based Hybrid Nanomaterials as Efficient Antiwear Lubricant Additives
  124. Synthesis Strategies for Graphene
  125. Growth analysis and high-yield synthesis of aligned-stacked branched nitrogen-doped carbon nanotubes using sesame oil as a natural botanical hydrocarbon precursor
  126. Catalyst-free synthesis of a three-dimensional nanoworm-like gallium oxide–graphene nanosheet hybrid structure with enhanced optical properties
  127. Graphene oxide: strategies for synthesis, reduction and frontier applications
  128. Microwave-assisted synthesis of void-induced graphene-wrapped nickel oxide hybrids for supercapacitor applications
  129. Simultaneous reduction and covalent grafting of polythiophene on graphene oxide sheets for excellent capacitance retention
  130. Fabrication of interdigitated micro-supercapacitor devices by direct laser writing onto ultra-thin, flexible and free-standing graphite oxide films
  131. Bio-Inspired Engineering of 3D Carbon Nanostructures
  132. Freestanding 3D Graphene-Nickel Encapsulated Nitrogen-Rich Aligned Bamboo Like Carbon Nanotubes for High-Performance Supercapacitors with Robust Cycle Stability
  133. Nanohole-Structured and Palladium-Embedded 3D Porous Graphene for Ultrahigh Hydrogen Storage and CO Oxidation Multifunctionalities
  134. Self-Assembled Hierarchical Formation of Conjugated 3D Cobalt Oxide Nanobead–CNT–Graphene Nanostructure Using Microwaves for High-Performance Supercapacitor Electrode
  135. Non-Functionalized Fluorescent Carbon Nanoparticles: In Vitro Imaging and Organic Solvent Sensing Applications
  136. Hydrothermal synthesis of a uniformly dispersed hybrid graphene–TiO2 nanostructure for optical and enhanced electrochemical applications
  137. Highly zone-dependent synthesis of different carbon nanostructures using plasma-enhanced arc discharge technique
  138. Microwave-assisted synthesis and deposition of a thin ZnO layer on microwave-exfoliated graphene: optical and electrochemical evaluations
  139. Graphene-wrapped and cobalt oxide-intercalated hybrid for extremely durable super-capacitor with ultrahigh energy and power densities
  140. Clean and Efficient Synthesis of Graphene Nanosheets and Rectangular Aligned-Carbon Nanotubes Bundles Using Green Botanical Hydrocarbon Precursor: Sesame Oil
  141. Pressure-dependent synthesis of high-quality few-layer graphene by plasma-enhanced arc discharge and their thermal stability
  142. An ionic liquid-assisted method for splitting carbon nanotubes to produce graphene nano-ribbons by microwave radiation
  143. Synthesis of coal-derived single-walled carbon nanotube from coal by varying the ratio of Zr/Ni as bimetallic catalyst
  144. Synthesis, characterization and optical properties of graphene sheets-ZnO multipod nanocomposites
  145. Synthesis of carbon and carbon–nitrogen nanotubes using green precursor: jatropha-derived biodiesel
  146. EFFECT OF NITROGEN VARIATION ON THE SYNTHESIS OF VERTICALLY ALIGNED BAMBOO-SHAPED C–N NANOTUBES USING SUNFLOWER OIL
  147. PREPARATION OF CARBON–NITROGEN NANOTUBES (CNNTs)–POLY ETHYLENE OXIDE (PEO) COMPOSITES FILMS AND THEIR ELECTRICAL CONDUCTIVITY MEASUREMENT
  148. Synthesis of nano-carbon (nanotubes, nanofibres, graphene) materials
  149. SYNTHESIS OF CATALYST-FREE AND TEMPERATURE CONTROLLED MORPHOLOGIES OF CARBON NANOSTRUCTURES USING BOTANICAL HYDROCARBON: CASTOR OIL
  150. Scalable synthesis of aligned carbon nanotubes bundles using green natural precursor: neem oil
  151. Large scale synthesis of bundles of aligned carbon nanotubes using a natural precursor: turpentine oil
  152. Electrical Properties of Carbon Nanotube-Polyacrylamide Composites