All Stories

  1. Processing, Characterization and Applications of Ceramic Matrix Composites
  2. Electrospun Poly(caprolactone)/Poly(ethylene oxide) Membranes Incorporating Green‐Synthesized Zinc Oxide Nanoparticles for Enhanced Wound Healing Applications
  3. Physicochemical characterization of ash, soot, and scrubber wastewater from different gas cleaning systems coupled to sugarcane bagasse boilers
  4. Engineering Electrospun PCL / PEO Membranes With ECM ‐Like Architecture and Tunable Hydrophilicity ...
  5. Alumina/silica/zirconia composite by two-step sintering for ballistic and aerospace applications
  6. Enhanced Fracture Toughness and Sintering Behaviour of Alumina via Incorporation of AlNbO4 Nanoparticles
  7. Glaze-engobe on plates enameled porcelain tiles: influence of application layer and firing shrinkage on planarity
  8. Ballistic Performance of Multilayer Polymer Fiber Composite Plates
  9. Evaluation of aluminoborophosphate enamel coating for application as a thermal barrier to aluminum alloys
  10. Using Brazilian Nepheline Syenite Waste as an Alternative Mineral Resource for Various Applications
  11. Development of a Tricalcium Silicate-Based Endodontic Repair Cement with ZnO: Evaluation of Radiopacity, Setting Behavior, and Cytotoxicity
  12. Investigation of nano‐SiO 2 and nano‐Al 2 O 3 additions in glaze formulation for Brazilian polished...
  13. An overview of the coal circularity in Brazil: A new sustainable approach based on sampling method, characterization, and waste valorization
  14. Electrospun adsorbent membrane of PLA containing chitosan for toxic metal ions removal from aqueous solution: Effect of chitosan incorporation
  15. Processing and Characterisation of Alumina/Eucryptite Nanostructured Composites
  16. Bioactive glass-ceramic composites from the Li2O-ZrO2-SiO2 and Beta-Tricalcium-Phosphate system for bone regeneration: Evaluation of bioactivity and cytotoxicity
  17. Toxicological evaluation of particulate matter dispersed in the indoor air of a ceramic tile industry
  18. Bovine bone–based activated carbon composite containing nanomagnetite as a catalyst for photo-Fenton reactions
  19. Rheological behavior of nepheline syenite beneficiation waste-based mortars
  20. Niobium doping as a pathway for tuning the optical properties of cobalt ferrites
  21. Fast-drying of red ceramics: A new evaluating approach based on the combined use of optical dilatometry and thermogravimetric analysis
  22. Nitrogen assisted one-step hydrothermal synthesis of commercial TiO2 for methylene blue degradation under visible light irradiation
  23. Pyroplastic deformation analysis of Brazilian porcelain tile formulations using mixture design
  24. Mesoporous bioactive scaffolds based on the 14.6Li2O⋅8.6ZrO2⋅67.3SiO2⋅9.5Al2O3 glass-ceramic as drug delivery for bone regeneration
  25. Influence of size and crystallinity of nanohydroxyapatite (nHA) particles on the properties of Polylactic Acid/nHA nanocomposite scaffolds produced by 3D printing
  26. Antimicrobial characteristics of the Li 2 O–ZrO 2 –Si 2 O bioactive glass and glass‐ceramic for bon...
  27. Bioactive glass enhanced alginate / carboxymethyl cellulose funcional dressings Li2O–ZrO2–SiO2
  28. Combustion synthesis of nanostructured calcium silicates: A new approach to develop bioceramic cements in endodontics
  29. Impact of Particle Size on the Setting Behavior of Tricalcium Silicate: A Comparative Study Using ISO 6876 Indentation Testing and Isothermal Induction Calorimetry
  30. Mechanical behavior of the system used in ventilated façade
  31. Cobalt Ferrite (CoFe2O4) Spinel as a New Efficient Magnetic Heterogeneous Fenton-like Catalyst for Wastewater Treatment
  32. Study of the mechanism of inhibiting alkali-aggregate reaction and self-healing in concrete materials
  33. Composite beads of alginate and biological hydroxyapatite from poultry and mariculture for hard tissue repair
  34. Low-gloss, silky matte glaze for porcelain tiles
  35. Valorization of Brazilian waste foundry sand from circular economy perspective
  36. Lithium aluminium silicate–based low–coefficient of thermal expansion materials obtained by colloidal and low–temperature approaches
  37. Plastic behaviour of clay materials for the manufacture of fast-drying red ceramics
  38. Low-temperature sol–gel synthesis of magnetite superparamagnetic nanoparticles: Influence of heat treatment and citrate–nitrate equivalence ratio
  39. Waste valorization of coal mining waste from a circular economy perspective: A Brazilian case study based on environmental and physicochemical features
  40. Pressed roofing tile based on cementitious material and basalt powder: Technological and toxicological characterization
  41. One-step CoFe2O4 gel combustion synthesis using tris(hydroxymethyl)aminomethane (TRIS) as alternative fuel: Control of oxidiser-to-fuel molar ratio for tuning its structural, magnetic, and optical properties
  42. Synthesis and characterization of nano α-alumina by an inorganic sol–gel method
  43. Correlation of synthesis parameters to the structural and magnetic properties of spinel cobalt ferrites (CoFe2O4) – an experimental and statistical study
  44. LZS bioactive glass-ceramic scaffolds: Colloidal processing, foam replication technique and mechanical properties to bone tissue engineering
  45. Waste valorization of iron ore tailings in Brazil: Assessment metrics from a circular economy perspective
  46. Single-burn clinkering of endodontic calcium silicate-based cements: Effects of ZnO in the C3S phase formation and hydration rate
  47. Basalt-Containing Pressed Cement Plates for Construction Systems: Technological and Toxicological Characterization
  48. Coal mining pyritic waste in Fenton-like processes: Raw and purified catalysts in Reactive Blue 21 dye discoloration
  49. Synthesis of chemically bonded porous ceramics from MgO–C refractory bricks waste
  50. Development of translucent ceramic tiles from modified porcelain stoneware tile paste
  51. Controlling efflorescence in geopolymers: A new approach
  52. Quartz quantification in porcelain stoneware tile formulations by differential scanning calorimetry
  53. Assessment of the recycling potential of stone processing plant wastes based on physicochemical features and market opportunities
  54. Nanostructured biological hydroxyapatite from Tilapia bone: A pathway to control crystallite size and crystallinity
  55. Conceptual design and cost analysis of a large‐scale plant for converting red mud into building materials
  56. Photocatalytic pathway on the degradation of methylene blue from aqueous solutions using magnetite nanoparticles
  57. Effects of roughness parameters on slip resistance for different methods used to determine the coefficient of friction for ceramic floor tiles
  58. Effect of the crystalline layer on the electrical behaviour of 17.7Li2O·5.2ZrO2·68.1SiO2·9.0Al2O3 glass ceramic monoliths
  59. Effect of Feldspar Substitution by Basalt on Pyroplastic Behaviour of Porcelain Tile Composition
  60. Thermal evaluation of the use of porous ceramic plates on ventilated façades – Part I: Effect of composition and firing temperature on porosity and bending strength
  61. Dissolution, bioactivity behavior, and cytotoxicity of 19.58Li2O·11.10ZrO2·69.32SiO2 glass–ceramic
  62. Thermal evaluation of the use of porous ceramic plates on ventilated façades—part II: Thermal behavior
  63. Ballistic ceramics and analysis of their mechanical properties for armour applications: A review
  64. Evolution of tricalcium silicate crystalline phase by differential scanning calorimetry for the development of endodontic calcium silicate-based cements
  65. Aluminum borophosphate glaze-coated aluminum alloy substrate: Coating properties and coating/substrate coupling
  66. Chemically-Bonded Magnesium Phosphate Ceramics from Magnesium Oxide-Graphite Refractory Brick Waste
  67. True Strength of Ceramic Fiber Bundles: Experiments and Simulations
  68. Facile synthesis of WOx/ZrO2 catalysts using WO3·H2O precipitate as synthetic precursor of active tungsten species
  69. Zeolites‐containing geopolymers obtained from biomass fly ash: Influence of temperature, composition, and porosity
  70. Development of new geopolymers based on stone cutting waste
  71. Laser-assisted glass-based sealing of polished porcelain stoneware tile surface to increase stain resistance
  72. Densified alumina obtained by two-step sintering: Impact of the microstructure on mechanical properties
  73. Effect of LZSA glass-ceramic addition on the erosive wear of pressureless sintered alumina
  74. Effect of MgO·Al2O3·SiO2 glass-ceramic as sintering aid on properties of alumina armors
  75. New waste-based supplementary cementitious materials: Mortars and concrete formulations
  76. Efeito da temperatura de sinterização e da adição de fibras poliméricas em cerâmica porosa obtida a partir de resíduos do processo Kraft
  77. Influence of the Length and the Content of Cellulose Fibers Obtained from Sugarcane Bagasse on the Mechanical Properties of Fiber-Reinforced Mortar Composites
  78. Desempenho balístico de estruturas multicamadas à base de alumina/epóxi
  79. Strengthened surface crystallized 19.6Li2O·11.0ZrO2·69.4SiO2 and 20.0Li2O·6.7ZrO2·68.9SiO2·4.4Al2O3 glass-ceramics
  80. Aluminum anodizing waste and its uses: An overview of potential applications and market opportunities
  81. CHARACTERIZATION OF PULP AND PAPER MILL WASTE FOR THE PRODUCTION OF WASTE-BASED CEMENT
  82. Coefficients of static and dynamic friction of ceramic floor tiles: proposal of new method of surface roughness determination
  83. Efeito da adição de resíduo de vidro em massa de cerâmica de alvenaria
  84. Lightweight high-strength concrete with the use of waste cenosphere as fine aggregate
  85. Obtenção de cerâmicas quimicamente ligadas a partir de resíduos industriais
  86. Thermal Behavior of Pyrite in the CO2 and N2 Atmosphere for Obtaining Pyrrhotite: A Magnetic Material
  87. Effect of the Addition of the Waste Generated from the Feldspar Mining on the Obtainment of Ceramic Brick
  88. Solid-state reaction in nanoparticulate alumina/LZSA glass-ceramic composites
  89. Thermal characterization of hydrated eco-friendly clinkers produced from pulp and paper mill waste
  90. Wastes from pulp and paper mills - a review of generation and recycling alternatives
  91. Evaluation of the Accelerated Degradation of Mortar in a Ceramic Coating Facade System
  92. Assessment of PCM-Impregnated Zeolite as a Matrix for Latent Heat Storage
  93. Structural Refinement by the Rietveld Method on Clinkers Obtained from Waste from Pulp and Paper Mills
  94. Use of Nickel Slag as Raw Material for Roof Tiles Production
  95. Obtainment of Porous Ceramic Structures: A Comparison among Different Compositions and Methods of Conformation
  96. Combating pathogens with Cs2.5H0.5PW12O40 nanoparticles: a new proton-regulated antimicrobial agent
  97. Antifungal activities against toxigenic Fusarium specie and deoxynivalenol adsorption capacity of ion-exchanged zeolites
  98. Comparison of Methods for Determining the Water Absorption of Glazed Porcelain Stoneware Ceramic Tiles
  99. Effect of LZSA Glass-Ceramic Addition on Pressureless Sintered Alumina. Part II: Mechanical Behavior
  100. Microstructural development and electrical behavior during crystalization of iron-rich glass-ceramics obtained from mill scale
  101. Use of mechanically-activated kaolin to replace ball clay in engobe for a ceramic tile
  102. New ion-exchanged zeolite derivatives: antifungal and antimycotoxin properties against Aspergillus flavus and aflatoxin B1
  103. Effect of temperature and holding time on the densification of alumina obtained by two-step sintering
  104. Waste-containing clinkers: Valorization of alternative mineral sources from pulp and paper mills
  105. Effect of LZSA Glass-Ceramic Addition on Pressureless Sintered Alumina. Part I: Grain Growth
  106. Evaluation of the thermal performance of different cold materials for urban paving
  107. Estudo de composições cerâmicas à base de alumina e vitrocerâmico do sistema LZSA para obtenção de estruturas multicamadas por tape casting
  108. Kinetics of the oxidation reactions and decomposition of pyrite
  109. Antibacterial and photocatalytic activity of ZnO nanoparticles from Zn(OH)2 dehydrated by azeotropic distillation, freeze drying, and ethanol washing
  110. Ballistic performance of Al2O3 mosaic armors with gap-filling materials
  111. MELHORIA DE QUALIDADE E REDUÇÃO DE CUSTO DE PRODUÇÃO COM A REFORMULAÇAO DE MASSA DE PORCELANATO TÉCNICO
  112. Cristalização de superfície em vidro do sistema Li2O–ZrO2–SiO2–Al2O3
  113. Efeito de Aditivo Defloculante no Processamento de Massa para a Obtenção de Blocos Cerâmicos Estruturais
  114. Permeability of Porous Ceramic Membranes Obtained from Waste of the Coal Extraction Process
  115. Crystallization Kinetics of β-Spodumene/Cordierite-Based Glass-Ceramics
  116. Improving physical properties of cubic InO 1.5 -stabilized zirconia by alloying with MoO 3
  117. Thermal Characterization of Neodymium-Barium-Copper Ceramic (NBCo Ceramic) Synthesized from Barium Carbonate
  118. A review of two-step sintering for ceramics
  119. Synthesis and characterization of Li2TiSiO5 obtained by melting and solid-state reaction
  120. Crystallization kinetic and thermal and electrical properties of β-spodumeness/cordierite glass–ceramics
  121. Resistance of InO 1.5 -stabilized tetragonal zirconia polycrystals to low-temperature degradation
  122. Azeotropic distillation, ethanol washing, and freeze drying on coprecipitated gels for production of high surface area 3Y–TZP and 8YSZ powders: A comparative study
  123. Evaluation of electrical properties of glass-ceramics obtained from mill scale
  124. Mechanical tests and simulation on load sharing in alumina fiber bundles
  125. Effect of a LZSA glass-ceramic addition on the sintering behavior of alumina
  126. Barium carbonate as an agent to improve the electrical properties of neodymium-barium-copper system at high temperature
  127. The Influence of Dopants in the Grain Size of Alumina - A Review
  128. Multilayered Ceramic Composites – A Review
  129. Waste valorization
  130. Permeability of porous ceramic based on calcium carbonate as pore generating agent
  131. Wear performance of alumina-based ceramics - a review of the influence of microstructure on erosive wear
  132. The use of ceramic sludge and recycled glass to obtain engobes for manufacturing ceramic tiles
  133. Multilayered ceramic composites – a review
  134. Mechanical and toxicological evaluation of concrete artifacts containing waste foundry sand
  135. Coarse Aggregates Obtained from Red Mud via Pelletizing Process
  136. Technology for Coke Production in Tunnel Kiln from Compacted Coal Powder
  137. Crystallization Kinetics of Iron Rich Glass-Ceramic Obtained from Waste of Steel Industry
  138. Eficiência Energética: a Economia Gerada pelo Isolamento Térmico em uma Tubulação de Reaproveitamento de Ar Quente
  139. Porous Ceramic Structures Obtained from Calcium Carbonate as Pore Generating Agent
  140. Sintering and crystallization of plates prepared from coarse glass ceramic frits
  141. Structural and fluid dynamic characterization of calcium carbonate-based porous ceramics
  142. Influence of Fe2O3 content on the dielectric behavior of aluminous porcelain insulators
  143. The effect of microstructural features on the mechanical properties of LZSA glass-ceramic matrix composites
  144. Erratum to: “Sintering kinetics of a 18.8Li2O 8.3ZrO2 64.2SiO2 8.7Al2O3 glass ceramic” [Ceramics International 37 (2011) 1865–1871]
  145. Reaproveitamento de Calor na Indústria Cerâmica
  146. Estudo da Influência do Regime de Moagem na Distribuição Granulométrica da Barbotina
  147. Mechanical properties of recycled PET fibers in concrete
  148. Sinterabilidade de pós de precursor vitrocerâmico do sistema LZSA tratados por troca iônica
  149. Caracterização de Resíduo Sólido de ETE da Indústria Cerâmica de Revestimento
  150. Crystallisation Kinetics of aβ-Spodumene-Based Glass Ceramic
  151. Sintering kinetics of a 18.8Li2O8.3ZrO264.2SiO28.7Al2O3 glass ceramic
  152. Relationship between Surface Abrasion Wear and Brightness in Glazed Porcelainized Stoneware Tiles
  153. Obtenção e caracterização de um vitrocerâmico a base de cordierita
  154. Sintering behavior of LZSA glass-ceramics
  155. Extruded ZrSiO4 particulate-reinforced LZSA glass–ceramics matrix composite
  156. Vitrocerâmicas porosas do sistema LZSA utilizando resíduos orgânicos como agentes formadores de poros
  157. Roll Pressed LZSA Glass-Ceramics
  158. Roll Pressed LZSA Glass-Ceramics