All Stories

  1. Sensitization of TiO2 NPs with curcumin and chlorella and photocatalytic performance for degradation of phenol and organic dyes
  2. Synthesis of magnetite nanoparticles by controlled precipitation under oxidative atmosphere
  3. Direct synthesis of TiO2 nanoparticles without heat treatment: Effect of order of addition and precursor/reducing ratio
  4. Plastic behaviour of clay materials for the manufacture of fast-drying red ceramics
  5. Photocatalytic discoloration of methylene blue by TiO2 P25 under UV light using ISO 10678 standard as a guide
  6. Adsorption of aflatoxin B1 mycotoxins by raw and lyophilized bentonitic clay
  7. Improving plasticity of kaolins by high-energy milling for use in porcelain tile compositions
  8. Synthesis and characterization of nano α-alumina by an inorganic sol–gel method
  9. High temperature performance of geopolymers as a function of the Si/Al ratio and alkaline media
  10. Valorization of porcelain tile polishing residue in the production of cellular ceramics
  11. Ecotoxic, genotoxic, and cytotoxic potential of leachate obtained from chromated copper arsenate-treated wood ashes
  12. Measurement of apparent sintering activation energy for densification of clays
  13. Corrosion resistant ZrO2/SiC ultrafiltration membranes for wastewater treatment and operation in harsh environments
  14. Use of enameling wastewater in the wet milling process for ‘monoporosa’ tile composition
  15. Hydro deformation in ceramic tiles at the pre-firing stage
  16. Nanostructured biological hydroxyapatite from Tilapia bone: A pathway to control crystallite size and crystallinity
  17. Synthesis and characterization of geopolymers using clay ceramic waste as source of aluminosilicate
  18. Valorization of rice husk ash and aluminum anodizing sludge as precursors for the synthesis of geopolymers
  19. Development of a water-based acrylic paint with resistance to efflorescence and test method to determine the appearance of stains
  20. Compressive strength, modulus of elasticity and hardness of geopolymeric cement synthetized from non-calcined natural kaolin
  21. Fast drying for the manufacturing of clay ceramics using natural clays
  22. Reuse of laminated glass waste in the manufacture of ceramic frits and glazes
  23. Sensitization of TiO2 nanoparticles with natural dyes extracts for photocatalytic activity under visible light
  24. Pyroplasticity on porcelain tiles of the albite-potassium feldspar-kaolin system: A mixture design analysis
  25. Characterization and use of clays and argillites from the south of Santa Catarina State, Brazil, for the manufacture of clay ceramics
  26. Influence of concrete admixture on the bond strength of reinforced concrete submitted to high temperature
  27. Effect of MgO·Al2O3·SiO2 glass-ceramic as sintering aid on properties of alumina armors
  28. Toxicological analysis of ceramic building materials – Tiles and glasses – Obtained from post-treated bottom ashes
  29. Sinter-crystallization of spodumene LAS glass-ceramic tiles processed by single-firing
  30. Biomining of iron-containing nanoparticles from coal tailings
  31. Efeito da adição de resíduo de vidro em massa de cerâmica de alvenaria
  32. Effect of the Addition of the Waste Generated from the Feldspar Mining on the Obtainment of Ceramic Brick
  33. Effect of porcelain tile polishing residue on geopolymer cement
  34. Production of vitreous materials from mineral coal bottom ash to minimize the pollution resulting from the waste generated by the thermoelectrical industry
  35. Effect of Temperature, Precursor Type and Dripping Time on the Crystallite Size of Nano ZnO Obtained by One-Pot Synthesis: 2k Full Factorial Design Analysis
  36. Effect of sensitization on tribological behavior of AISI 304 austenitic stainless steel
  37. Efficient self-compacting concrete with low cement consumption
  38. Pigmented glazed ceramic roof tiles in Brazil: Thermal and optical properties related to solar reflectance index
  39. Synthesis and Evaluation of Amides as Slip Additives in Polypropylene
  40. Effectiveness of ceramic tile polishing residues as supplementary cementitious materials for cement mortars
  41. Effect of firing temperature on the photocatalytic activity of anatase ceramic glazes
  42. Effect of reduction of thickness on microstructure and properties of porcelain stoneware tiles
  43. Evaluation of the healing activity of therapeutic clay in rat skin wounds
  44. Morphology and Fluidity of Spray-Dried Powder Transported by Compressed Air
  45. Formulation of ceramic engobes with recycled glass using mixture design
  46. Forming of thin porcelain tiles: A comparison between tape casting and dry pressing
  47. Superfícies fotocatalíticas de titânia em substratos cerâmicos. Parte II: substratos, processos de deposição e tratamento térmico
  48. Geopolymer synthetized from bottom coal ash and calcined paper sludge
  49. Inertization of Coal Ashes by the Vitrification Technique: A Mixture Design Approach
  50. Tonality variation in ceramic tile silkscreen decoration: Effect of ink density and mesh opening gradient
  51. Ceramic colorant from untreated iron ore residue
  52. Gamma Decomposition and Powder Formation of γ-U8Mo Nuclear Fuel Alloys via a Hydration–Dehydration Process
  53. Lightweight concrete production with low Portland cement consumption
  54. Synthesis of 4A zeolites from kaolin for obtaining 5A zeolites through ionic exchange for adsorption of arsenic
  55. Recycling of Porcelain Tile Polishing Residue in Portland Cement: Hydration Efficiency
  56. Mineralogical and Physical–Chemical Characterization of a Bauxite Ore from Lages, Santa Catarina, Brazil, for Refractory Production
  57. Concrete made with recycled tire rubber: Effect of alkaline activation and silica fume addition
  58. Ecotoxicological analysis of glasses obtained from industrial residues using E. coli and S. aureus as bioindicators
  59. Obtenção e caracterização de um vitrocerâmico a base de cordierita
  60. Production and Characterization of ZnO Nanocrystals Obtained by Solochemical Processing at Different Temperatures
  61. A study of the recycling and stability of flexographic photopolymer plates
  62. Sintering behavior of LZSA glass-ceramics
  63. Bactericide glasses developed by Na+/Ag+ ionic exchange
  64. Development of TiO2 white glazes for ceramic tiles☆
  65. Leaching and Solubility Analysis of Porcelain-Recycled Tile Residues in Clay Bricks
  66. The influence of particle size distribution on the surface appearance of glazed tiles
  67. Diffusion of Cr–Fe–Al–Zn pigment in a zirconia glaze
  68. Inorganic pigments made from the recycling of coal mine drainage treatment sludge
  69. Determination of clay plasticity: Indentation method versus Pfefferkorn method
  70. Evaluation of the steger method in the determination of ceramic-glaze joining
  71. Characterization of cellular ceramics made by porcelain tile residues
  72. Pyroplasticity in porcelain tiles
  73. Characterization of aluminized polyethylene blends via mechanical recycling