All Stories

  1. Fundamental first-principles basis for stability and optoelectronic characteristics in lead-free Mg 3 PCl 3 perovskite
  2. Novel stable high-performance electronic, optical, and thermoelectric properties of 2D CdPS 3 monolayer for energy applications
  3. Simulation and performance improvement routes of catalytic naphtha reforming net gas absorption-stripping section: Skikda refinery case study
  4. First-principles calculations to investigate structural, mechanical, electronic and optical properties of Na 2 CuSbF 6 for sustainable device applicat...
  5. Influence of rare-earth substitution on physical and hydrogen storage properties of XTiH3 (X = Eu, Gd, Pm, Sm) hydrides: A first-principles and AIMD study
  6. Exploring the Optoelectronic Potential of K 3 AlX 6 (X = Br, I) Halide Compounds via First-Principles Calculations
  7. Unveiling the Potential of Fluorine-Based Double Perovskites A 2 InGaF 6 (A=Cs, Na) for UV-Visible Optoelectronics via First-Principles Analysis for O...
  8. Biofuels: Exploring the Future of Green & Clean Energy
  9. A Sustainable Double‐Absorber Perovskite Solar Cell Based on Ca 3 NBr 3 and Ca 3 NCl ...
  10. Li‐Based Perovskite X LiH 3 ( X  = Ti, V, Cr, or Mn) Hydrides for Hydrogen Storage Applications: A First‐Pr...
  11. First-principles study of lead-free A 3 InX 6 (A = Rb, Cs; X = Cl, Br, I) defect -perovskites: structural, electronic, optical, and mechanical properties
  12. Performance Boost in Novel CBAI/SNMO Double Perovskite Solar Cells via GO-Induced Back Surface Field Optimization
  13. Exploring lead-free A 2 AgRhF 6 fluoride double perovskites for photovoltaic applications: a first-principles and device simulation study
  14. Machine-learning–driven exploration of HTL effects in Mg 3 SbBr 3 perovskite solar cells for ultra-high efficiency
  15. Mn 3 O 4 /biochar catalyst for enhanced PMS activation and antibiotic degradation via radical and non-r...
  16. Correction: Elboughdiri et al. Comprehensive Investigation of Cu2+ Adsorption from Wastewater Using Olive-Waste-Derived Adsorbents: Experimental and Molecular Insights. Int. J. Mol. Sci. 2024, 25, 1028
  17. Enhancing reliability and safety of uncertain grid-connected photovoltaic systems based on intelligent transient regime analysis
  18. Simulation of Two-Phase Flow Pollutant Transport in Porous Media Using Experimental and CFD Model
  19. Optimizing green hydrogen production: Analyzing the performance of photovoltaic-driven solid oxide electrolyzers under various solar conditions
  20. Investigation of the heat transfer coefficient in a plate heat exchanger for cooling product before storage: Based on a biodiesel plant case
  21. Combustion enhancement and emission reduction in an IC engine by adopting ZnO nanoparticles with calophyllum biodiesel/diesel/propanol blend: A case study of General Regression Neural Network (GRNN) modelling
  22. Charge separation by switching heterojunction system from Type-II to S-scheme for enhanced photocatalytic activity: Environmental detoxification and H2 production
  23. Estimating the Energy Recovery Potential from Municipal Solid Waste in Ha’il Region (Kingdom of Saudi Arabia)
  24. The role of machine learning in analyzing magnetic field localization and vortex generation in tetra-hybrid nanofluid: A numerical study
  25. In-depth insight into the adsorption mechanism of the piperidine-based inhibitors for excellent corrosion performance: Electrochemical and computational evaluation
  26. Heat Stress Response Mechanisms and Resilience Strategies in Wheat
  27. Advanced clay-based geopolymer: influence of structural and material parameters on its performance and applications
  28. Exploring the structural, electronic, optical, mechanical and thermoelectric properties of copper based double perovskites Rb2YCuX6 (X=Br, I)
  29. First principles insight into Cs2YZnX6 (X = Br, I) double perovskite materials for optoelectronic and thermoelectric device applications
  30. Innovative computational framework for Sr3SbCl3 absorber optimization: DFT, SCAPS-1D, and machine learning perspectives
  31. Modeling Anaerobic Decomposition: JMP Application with Biomass Data
  32. Study on the structural, optical, vibrational and dielectric properties of Cr2+-doped SnFe2O4 spinel ferrites
  33. Rb 2 BX 6 double perovskites: unlocking 22% efficiency through structural, electronic, mechanical, and optical insights
  34. Unveiling ferroelectric and altermagnetic coexistence in multiferroic HfMnO3 perovskite
  35. Comprehensive first-principles analysis and device simulations of vacancy-ordered D 2 CeX 6 double perovskites for high-efficiency lead-free solar cells
  36. High-performance electronic, optical, and thermoelectric properties of 2D Mg 2 In 2 S 5 monolayer f...
  37. Achieving 34 % efficiency with a dual-absorber solar cell design using CaRbCl3 and Ca3NCl3 perovskites
  38. Simulation of a system to simultaneously recover CO2 and sweet carbon-neutral natural gas from wet natural gas: A delve into process inputs and units performances
  39. Preparing Sustainable Membranes Made From Zeolite–Smectite for Treating Textile Wastewater and Pulp Industry Wastewater
  40. A novel S-scheme photocatalyst Fe2O3/Bi2O3/g-C3N4 with enhanced visible-light photocatalytic performance for antibiotic degradation and CO2 reduction: RSM-based optimization
  41. Corrigendum to "Efficient wastewater decontamination using magnetic bentonite-alginate beads: A comprehensive study of adsorption dynamics, regeneration, and molecular interactions" [J. Environ. Chem. Eng.; vol. 12, Issue 3 (2024) 113000]
  42. Exploring the structural, electronic, mechanical, magnetic and optical properties of Cs-based hydride-perovskites CsXH3 (X = Cr, Mn) for hydrogen storage application
  43. Photocatalytic hydrogen production and sulfamerazine degradation via a novel dual S-scheme photocatalyst: Nanocomposite synthesis, characterization and mechanism insights
  44. Solubility and extractability enhancement of the main food flavonoids by using choline chloride-based natural deep eutectic solvents
  45. Structural, electronic, magnetic, optical and thermoelectric properties of ferromagnetic double perovskites K2ScCoX6 (X = F, Cl): A first-principles study
  46. Sustainable Photodegradation of Amoxicillin in Wastewater with a Nickel Aluminate and ZnO Heterosystem Oxides: Experimental and Gaussian Process Regression Modeling Studies
  47. Harnessing Deep Learning for Real-Time Water Quality Assessment: A Sustainable Solution
  48. Heat recovery integration in a hybrid geothermal-based system producing power and heating using machine learning approach to maximize outputs
  49. DFT insights for thermoelectric characteristics of Sr3AsI3 for energy harvesting applications by TB-mBJ studies
  50. Lignin valorization through the oxidative activity of β-etherases: Recent advances and perspectives
  51. Novel S-scheme WO3/ZnO-modified g-C3N4 heterojunction for optimizing norfloxacin photodegradation condition via DoE: Synthesis, characterization, and mechanism evaluation
  52. Antioxidant Activities and Phenolic Composition of Sarcococca saligna Leaves
  53. Sustainable food systems transformation in the face of climate change: strategies, challenges, and policy implications
  54. Characteristics of unsteady thermo-bioconvection chemical reactive stagnation point flow of trihybrid nanofluid around rotating sphere with Oxytactic Microorganisms
  55. Combine thermal performance based on dust particles and Hall and ion slip currents including tetra-hybrid nanoparticles on Howarth's wavy pipe
  56. Development of a poly-generation layout centered on the utilization of rice straw triggered by an air-gas turbine cycle; Multi-facet optimization
  57. Tribocatalytic activity in lithium borate-bismuth tungstate nanocrystal glass-ceramics
  58. Biocomposite of nontronite/Enteromorpha sp. for cationic methylene blue dye removal: optimization, kinetics, and isothermal thermodynamics study
  59. Impact of thermal energy efficiency based on kerosene oil movement through hybrid nano-particles across contracting/stretching needle
  60. Comparative analysis of physicochemical properties and biological activities of crude polysaccharides isolated from selected Auricularia cornea strains
  61. Development and characterization of pH-responsive Delonix regia/mucin co-poly (acrylate) hydrogel for controlled drug delivery of metformin HCl
  62. Effects of Joule heating and viscous dissipation on EMHD boundary layer rheology of viscoelastic fluid over an inclined plate
  63. Evaluating asphaltene dispersion with choline chloride or menthol based deep eutectic solvents: A COSMO-RS analysis
  64. Mimosa/quince seed mucilage–co-poly (methacrylate) hydrogels for controlled delivery of capecitabine: Simulation studies, characterization and toxicological evaluation
  65. Synthesis of a highly efficient ternary Heterostructure for synergistic charge migration: Dual-functional enhancement in photocatalytic ciprofloxacin degradation and hydrogen production
  66. Unveiling the dual role of a novel azomethine: Corrosion inhibition and antioxidant potency – a multifaceted study integrating experimental and theoretical approaches
  67. Zinc chloride-assisted activation of açaí biomass for herbicide removal: Insights from adsorption and molecular modeling
  68. Enhanced wastewater treatment by catalytic persulfate activation with protonated hydroxylamine-assisted iron: Insights from a deep learning-based numerical investigation
  69. Utilization of commercial anion exchange membrane DF-120 for adsorptive removal of eosin-B from wastewater
  70. Removal enhancement of persistent basic fuchsin dye from wastewater using an eco-friendly, cost-effective Fenton process with sodium percarbonate and waste iron catalyst
  71. Application of statistical physical, DFT computation and molecular dynamics simulation for enhanced removal of crystal violet and basic fuchsin dyes utilizing biosorbent derived from residual watermelon seeds (Citrullus lanatus)
  72. Efficient wastewater decontamination using magnetic bentonite-alginate beads: A comprehensive study of adsorption dynamics, regeneration, and molecular interactions
  73. Novel reduction schemes for a dissipative dynamical system: A study on slow invariant manifolds in chemical kinetics
  74. Iron Oxide–Copper Mineral Associations in Supergene Zones: Insights into Flotation Challenges and Optimization Using Response Surface Methodology
  75. Evaluating the feasibility of direct contact membrane distillation and nanofiltration in ground water treatment through a techno-economic analysis
  76. Development and evaluation of a pH-responsive Mimosa pudica seed mucilage/β- cyclodextrin-co-poly(methacrylate) hydrogel for controlled drug delivery: In vitro and in vivo assessment
  77. Enhancing hydrogen separation efficiency: Insights from the permeability study of nickel-based composite membranes
  78. Corrosion inhibition of mild steel in acidic environments: Mechanistic insights and protective effects of azo-cum inhibitor
  79. Investigation of flow behaviour in the nozzle of a Pelton wheel: Effects and analysis of influencing parameters
  80. Numerical modeling of a novel hybrid system composed of tubiform solid oxide fuel cell and segmented annular thermoelectric generator (SOFC/SATEG)
  81. Unveiling the potent corrosion-inhibiting power of Ammophila arenaria aqueous extract for mild steel in acidic environments: An integrated experimental and computational study
  82. Advanced Molecular Approaches for Improving Crop Yield and Quality: A Review
  83. A new binder-free ZnS-CuO microsphere: A battery-type electrode material for asymmetric supercapacitor
  84. Harnessing the power of bacterial laccases for xenobiotic degradation in water: A 10-year overview
  85. Heavy metal (Cu2+) removal from wastewater by metal-organic framework composite adsorbent: Simulation-based- artificial neural network and response surface methodology
  86. Lignin developmental patterns and Casparian strip as apoplastic barriers: A review
  87. Multifunctional biocomposites based on cross-linked Shrimp waste-derived chitosan modified Zn2+@Calcium apatite for the removal of methyl orange and antibacterial activity
  88. Sustainable production of bacterial flocculants by nylon-6,6 microplastics hydrolysate utilizing Brucella intermedia ZL-06
  89. Effects of CO2 concentration and time on algal biomass film, NO3–N concentration, and pH in the membrane bioreactor: Simulation-based ANN, RSM and NSGA-II
  90. Influence of chemical reaction on electro-osmotic flow of nanofluid through convergent multi-sinusoidal passages
  91. Using response surface methodology for multi-objective optimization of an efficient/clean combined heating/power system based on sugarcane bagasse gasification for environmental sustainability
  92. Innovative Solutions for Water Treatment: Unveiling the Potential of Polyoxazoline Polymer Activated Carbon Composite for Efficient Elimination of Lead Ions
  93. Comprehensive Investigation of Cu2+ Adsorption from Wastewater Using Olive-Waste-Derived Adsorbents: Experimental and Molecular Insights
  94. Unveiling the resistance of native weed communities: insights for managing invasive weed species in disturbed environments
  95. Tomato seed bio-priming with Pseudomonas aeruginosa strain PAR: a study on plant growth parameters under sodium fluoride stress
  96. Adsorption of Eosin B from Wastewater onto the Prepared Porous Anion Exchange Membrane
  97. A multi-criteria decision study with sensitivity analysis on a tri-generation system based on gas turbine fueled by wheat straw biomass
  98. Arc-curved microchannels engraved on segmented circular heat sink for heat transfer augmentation; ANN-based performance optimization
  99. Chitosan-based intelligent polymeric networks for site-specific colon medication delivery: A comprehensive study on controlled release of diloxanide furoate and network formation dynamics
  100. Efficient biodiesel production from recycled cooking oil using a NaOH/CoFe2O4 magnetic nano-catalyst: synthesis, characterization, and process enhancement for sustainability
  101. Enhancing precision in PANI/Gr nanocomposite design: robust machine learning models, outlier resilience, and molecular input insights for superior electrical conductivity and gas sensing performance
  102. Experimental and computational investigations on mechanically alloyed Fe55Co30Ni15 powders
  103. Graphene oxide-based probe for detecting deltamethrin and emamectin benzoate pesticides in agricultural run-off
  104. Significance of heat passage in four-phase Oldroyd-B nanofluid with solar thermal radiations through a cone: A study of entropy analysis
  105. Structural, electronic and thermoelectric properties of boron phosphorous nitride B2PN via first principles study
  106. Well-defined tricobalt tetraoxide's critical morphology effect on the structure–reactivity relationship
  107. Nano-Agrochemicals as Substitutes for Pesticides: Prospects and Risks
  108. Tailoring Vanadium-Based Magnetic Catalyst by In Situ Encapsulation of Tungsten Disulfide and Applications in Abatement of Multiple Pollutants
  109. An innovative and environmentally friendly approach for resveratrol solubilization and bioaccessibility enhancement by using natural deep eutectic solvents
  110. Examining the microstructure, morphological features, and wetting characteristics of Ti/TiN/TiAlN thin films produced through RF/DC magnetron co-sputtering
  111. Preparation of composite of bentonite clay and Azadirachta indica (neem) leaves powder for the removal of Congo red from an aqueous solution
  112. Analysis of a Ferromagnetic Nanofluid Saturating a Porous Medium with Nield’s Boundary Conditions
  113. Adsorption kinetic, equilibrium and thermodynamic studies for the removal of Acid Blue 25 from wastewater by using modified sugarcane bagasse
  114. Numerical analysis of thermohydraulic and exergetic performance in corrugated spiral tubes with diverse arc corrugation configurations
  115. Prolonging the Durability of Maritime Constructions through a Sustainable and Salt-Resistant Cement Composite
  116. Tailoring porous organic polymers with enhanced capacity, thermal stability and surface area for perfluorooctane sulfonic acid (PFOS) elimination from water environment
  117. In vitro antioxidant and antibacterial activities of ethanolic extracts from the leaves and stems of Oudneya Africana R. growing in the El Oued (Algeria)
  118. Artificial neural networks vs. gene expression programming for predicting emission & engine efficiency of SI operated on blends of gasoline-methanol-hydrogen fuel
  119. Phosphorus-carrying cascade molecules: inner architecture to biomedical applications
  120. Ce0.7La0.15Ca0.15O2−δ nanoparticles synthesis via colloidal solution combustion method: Studying structural and physicochemical properties and Congo Red dye photodegradation
  121. Simulating two Algerian cities' desalination plants coupled with solar energy systems using TRNSYS
  122. Application of herbal dietary supplements in aquaculture – a review
  123. Steady state modeling of autotrophic membrane bioreactor – a new approach to quantify biomass
  124. A passive control approach for simulating thermally enhanced Jeffery nanofluid flows nearby a sucked impermeable surface subjected to buoyancy and Lorentz forces
  125. Infections associated with SARS-CoV-2 exploited via nanoformulated photodynamic therapy
  126. Corrosion Inhibition of Azo Compounds Derived from Schiff Bases on Mild Steel (XC70) in (HCl, 1 M DMSO) Medium: An Experimental and Theoretical Study
  127. Modeling and Optimizing the Crystal Violet Dye Adsorption on Kaolinite Mixed with Cellulose Waste Red Bean Peels: Insights into the Kinetic, Isothermal, Thermodynamic, and Mechanistic Study
  128. Towards a novel EMHD dissipative stagnation point flow model for radiating copper-based ethylene glycol nanofluids: An unsteady two-dimensional homogeneous second-grade flow case study
  129. Determination of some physico-thermal and mechanical characteristics of hydrated Jordanian Lajjun oil shale ash
  130. Correction to “Adsorption of Methyl Orange from an Aqueous Solution onto a BPPO-Based Anion Exchange Membrane”
  131. Synthesis of CeO 2 Nanosheet with Predominantly Exposed (111) and (220) Planes via Sacrificial-Template Accelerated Hydrolysis for CO Oxidation Reaction
  132. An eco-friendly approach on green synthesis, bio-engineering applications, and future outlook of ZnO nanomaterial: A critical review
  133. Treatment of Fly-Ash-Contaminated Wastewater Loaded with Heavy Metals by Using Fly-Ash-Synthesized Iron Oxide Nanoparticles
  134. Natural convective greenhouse vermicelli drying: Thermo-environ-econo-kinetic analyses
  135. XAD-4 resin impregnated with oxytetracycline for the online preconcentration of zirconium (IV) from environmental and geological samples
  136. Plant and Microbial Approaches as Green Methods for the Synthesis of Nanomaterials: Synthesis, Applications, and Future Perspectives
  137. Enhanced electrical and magnetic properties of (Co, Yb) co-doped ZnO memristor for neuromorphic computing
  138. Feasibility study of dealuminated kaolin utilization in marine constructions
  139. Transforming waste cooking oil into environmentally friendly biodiesel: a comparative analysis of three transesterification methods
  140. Applying Chitin Enhanced Diafiltration Process (CEFP) in Removing Cobalt from Synthetic Wastewater
  141. Barium Doped Ceria Based Material and its Electrochemical and Photocatalytic Properties at Low Temperatures
  142. Molecularly Imprinted Polymeric Sorbent for Targeted Dispersive Solid-Phase Microextraction of Fipronil from Milk Samples
  143. Application of NaOH modified rice husk as a potential sorbent for removal of Congo red from an aqueous solution
  144. Peristaltic pumping of hybrid nanofluid between concentric tubes with magnetic device effects: Applications to human endoscopy
  145. Effect of Different Zeolite Supports on the Catalytic Behavior of Platinum Nanoparticles in Cyclohexene Hydrogenation Reaction
  146. Folcare biostimulant application in pea (Pisum sativum) crops under ZnO bionanoparticle exposure
  147. Nano-mediated Strategies for Metal Ion–Induced Neurodegenerative Disorders: Focus on Alzheimer’s and Parkinson’s Diseases
  148. Progressive thermal onset of modified hybrid nanoparticles for oscillating flow via modified fractional approach
  149. Electrocoagulation process for removing dyes and chemical oxygen demand from wastewater: operational conditions and economic assessment – a review
  150. The selectivity of electron acceptors for the removal of caffeine, gliclazide, and prazosin in an up-flow anaerobic sludge blanket (UASB) reactor
  151. Biodegradable Magnetic Molecularly Imprinted Anticancer Drug Carrier for the Targeted Delivery of Docetaxel
  152. Theoretical and experimental evidence for the use of natural deep eutectic solvents to increase the solubility and extractability of curcumin
  153. Adsorption of Methyl Orange from an Aqueous Solution onto a BPPO-Based Anion Exchange Membrane
  154. Extraction and Evaluation of the Antimicrobial Activity of Polyphenols from Banana Peels Employing Different Extraction Techniques
  155. Comparative Study of Chemical Coagulation and Electrocoagulation for the Treatment of Real Textile Wastewater: Optimization and Operating Cost Estimation
  156. Fabrication and characterization of nanocomposite membranes for the rejection of textile dye
  157. Current Application of Chemometrics Analysis in Authentication of Natural Products: A Review
  158. Adsorption performance of rice husk towards copper ions from wastewater
  159. Electrical Stability and Piezoresistive Sensing Performance of High Strain-Range Ultra-Stretchable CNT-Embedded Sensors
  160. Application of the commercial anion exchange membrane for adsorptive removal of Eriochrome Black-T from aqueous solution
  161. A Synergistic Effect of Moringa oleifera-Based Coagulant and Ultrafiltration for the Wastewater Treatment Collected from Final ETP
  162. Multifunctional crosslinked chitosan/nitrogen-doped graphene quantum dot for wastewater treatment
  163. Valorization of almond shells’ lignocellulosic microparticles for controlled release urea production: interactive effect of process parameters on longevity and kinetics of nutrient release
  164. Applying iron coating on the Saudi Arabia volcanic tuff for enhancing mercury adsorption from synthetic wastewater
  165. Determination of Blood Calcium and Lead Concentrations in Osteoporotic and Osteopenic Patients in Pakistan
  166. Green Chemistry and Process Intensification: Milestones on a Sustainable Development
  167. Silver supported-Ag@PMOS onto thumb structured porous organosilica materials with efficient hetero-junction active sites for photo-degradation of methyl orange dye
  168. BiVO3/g-C3N4 S-scheme heterojunction nanocomposite photocatalyst for hydrogen production and amaranth dye removal
  169. Overview of Feedstocks for Sustainable Biodiesel Production and Implementation of the Biodiesel Program in Pakistan
  170. TiO2 subsidized periodic mesoporous organosilicate (TiO2@PMOS) for facile photodegradation of methyl orange dye
  171. Energizing periodic mesoporous organosilica (PMOS) with bismuth and cerium for photo‐degrading methylene blue and methyl orange in water
  172. Effect of Different Quaternary Ammonium Groups on the Hydroxide Conductivity and Stability of Anion Exchange Membranes
  173. Steam-activated sawdust efficiency in treating wastewater contaminated by heavy metals and phenolic compounds
  174. Synthesis of DMEA-Grafted Anion Exchange Membrane for Adsorptive Discharge of Methyl Orange from Wastewaters
  175. Higher Acid Recovery Efficiency of Novel Functionalized Inorganic/Organic Composite Anion Exchange Membranes from Acidic Wastewater
  176. ATR–FTIR Spectroscopy, HPLC Chromatography, and Multivariate Analysis for Controlling Bee Pollen Quality in Some Algerian Regions
  177. Algerian Bee Pollen Classification by Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (ATR-FTIR) Combined with Chemometrics Analysis
  178. Enhancing the Extraction of Phenolic Compounds from Juniper Berries Using the Box-Behnken Design
  179. Reagents assisted Mg-doped CeO2 for high-performance energy-storage applications
  180. New insights towards disinfecting viruses – short notes
  181. Production and Characterization of Controlled Release Urea Using Biopolymer and Geopolymer as Coating Materials
  182. The use of natural zeolite to remove heavy metals Cu (II), Pb (II) and Cd (II), from industrial wastewater
  183. Groundwater vulnerability mapping of Jordanian phosphate mining area based on phosphate concentration and GIS: Al-Abiad mine as a case study