All Stories

  1. Reversible and dynamic transitions between sticky and slippery states on porous surfaces with ultra-low backpressure
  2. Active porous valves for plug actuation and plug flow manipulation in open channel fluidics
  3. All-plastic, low-power, disposable, continuous-flow PCR chip with integrated microheaters for rapid DNA amplification
  4. Sol–gel synthesized, low-temperature processed, reduced molybdenum peroxides for organic optoelectronics applications
  5. Influence of the Oxygen Substoichiometry and of the Hydrogen Incorporation on the Electronic Band Structure of Amorphous Tungsten Oxide Films
  6. Highly porous tungsten oxides for electrochromic applications
  7. Reversible pressure-induced switching of droplet mobility after impingement on porous surface media
  8. Effect of the Oxygen Sub-Stoichiometry and of Hydrogen Insertion on the Formation of Intermediate Bands within the Gap of Disordered Molybdenum Oxide Films
  9. Formation of stoichiometric, sub-stoichiometric undoped and hydrogen doped tungsten oxide films, enabled by pulsed introduction of O2 or H2 during hot-wire vapor deposition
  10. Integrated biochip for PCR-based DNA amplification and detection on capacitive biosensors
  11. Omnidirectional antireflective properties of porous tungsten oxide films with in-depth variation of void fraction and stoichiometry
  12. High performance organic light emitting diodes using substoichiometric tungsten oxide as efficient hole injection layer
  13. On the optical properties of SLS ELA polycrystalline silicon films
  14. Substoichiometric hot-wire WOx films deposited in reducing environment
  15. Porous hot-wire deposited WO3 films with high optical transmission
  16. A continuous flow μPCR device with integrated microheaters on a flexible polyimide substrate
  17. Plasma directed assembly and organization: bottom-up nanopatterning using top-down technology
  18. Micro and nano structuring and texturing of polymers using plasma processes: potential manufacturing applications
  19. Mechanisms of Oxygen Plasma Nanotexturing of Organic Polymer Surfaces: From Stable Super Hydrophilic to Super Hydrophobic Surfaces
  20. Nano-textured polymer surfaces with controlled wetting and optical properties using plasma processing
  21. Flexible organic light emitting diodes (OLEDs) based on a blue emitting polyfluorene
  22. Plasma Etching and Roughening of Thin Polymeric Films: A Fast, Accurate, in situ Method of Surface Roughness Measurement
  23. Plasma processing for polymeric microfluidics fabrication and surface modification: Effect of super-hydrophobic walls on electroosmotic flow
  24. Optical characterization of Si-rich silicon nitride films prepared by low pressure chemical vapor deposition
  25. Nanotextured super-hydrophobic transparent poly(methyl methacrylate) surfaces using high-density plasma processing
  26. Optical and structural properties of copper oxide thin films grown by oxidation of metal layers
  27. Thickness-dependent glass transition temperature of thin resist films for high resolution lithography
  28. Plasma oxidation of polyhedral oligomeric silsesquioxane polymers
  29. Multiwavelength interferometry and competing optical methods for the thermal probing of thin polymeric films
  30. Oxygen-Plasma Modification of Polyhedral Oligomeric Silsesquioxane (POSS) Containing Copolymers for Micro- and Nanofabrication
  31. Increased plasma etch resistance of thin polymeric and photoresist films
  32. Plasma etch rate measurements of thin PMMA films and correlation with the glass transition temperature
  33. Patterning of thick polymeric substrates for the fabrication of microfluidic devices