Contact

All Stories

  1. Comparative study of the influence of tool diameter on axial tool wear, cavity formation, and surface integrity in electro discharge drilling of Ti–6Al–4V

    Article • Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, July 2026, SAGE Publications

    Dr. Mohan Kumar Pradhan

  2. Comparative analysis of rotary and stationary tool EDM for improved machinability of Inconel 825

    Article • Journal of Mechanical Science and Technology, April 2026, Springer Science + Business Media

    Dr. Mohan Kumar Pradhan

  3. Design and Structural Analysis of Composite Oil Pan with Limited Boundary Conditions

    Article • January 2026, Springer Science + Business Media

    Dr. Mohan Kumar Pradhan

  4. Performance Enhancement Through Slotted Tool in Rotary Tool Electrical Discharge Machining Process

    Article • January 2026, Springer Science + Business Media

    Dr. Mohan Kumar Pradhan

  5. Sustainable Manufacturing Practices in the Digital Age

    Article • October 2025, Taylor & Francis

    Dr. Mohan Kumar Pradhan

  6. Introduction to Manufacturing in the Digital Age

    Article • October 2025, Taylor & Francis

    Dr. Mohan Kumar Pradhan

  7. Manufacturing in the Digital Age

    Article • October 2025, Taylor & Francis

    Dr. Mohan Kumar Pradhan

  8. Optimization of Micro-Milling Parameters for Python Skin-Inspired Biomimetic Micro-Textures: An Experimental Study

    Article • September 2025, ASME International

    Dr. Mohan Kumar Pradhan

  9. Machine Learning-Driven Regression Modelling and RSM-Based Experimental Analysis

    Article • September 2025, ASME International

    Dr. Mohan Kumar Pradhan

  10. Enhancing EDM performance of Inconel 825 alloy using the rotary EDM process

    Article • Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, July 2025, SAGE Publications

    Dr. Mohan Kumar Pradhan

  11. Integration of Machine Learning in Virtual Workstations for Improved Efficiency and Productivity in Industry 4.0

    Article • January 2025, Springer Science + Business Media

    Dr. Mohan Kumar Pradhan

  12. A hybrid GRA-PCA-TOPSIS Technique Optimization of EDD Process Parameter on Drilling of AL8011/B4C/aloevera composites

    Article • Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, November 2024, SAGE Publications

    Dr. Mohan Kumar Pradhan

  13. Selection of Optimal Ceramic Materials Using Various Multi-criteria Decision-Making Techniques for Diverse Applications

    Article • January 2024, Springer Science + Business Media

    Dr. Mohan Kumar Pradhan

  14. Optimization of geometrical factors for enhanced performance of carbon fiber reinforced polymer cores under transverse loading

    Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, December 2023, SAGE Publications

    Dr. Mohan Kumar Pradhan

  15. Fabrication, characterization and optimal selection of aluminium alloy 8011 composites reinforced with B 4 C-aloe vera ash

    Article • Materials Research Express, November 2023, Institute of Physics Publishing

    Dr. Mohan Kumar Pradhan

  16. Measurement of EDMed surfaces roughness using convolutional neural network

    Article • Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, July 2023, SAGE Publications

    Dr. Mohan Kumar Pradhan

  17. Machining of nickel-based super alloy inconel 718 using alumina nanofluid in powder mixed electric discharge machining

    Article • Materials Research Express, March 2023, Institute of Physics Publishing

    Dr. Mohan Kumar Pradhan

  18. Dry sliding wear response of aluminium matrix composites (AMCs): a critical review

    Article • Materials Research Express, February 2023, Institute of Physics Publishing

    Dr. Mohan Kumar Pradhan

  19. Application of Digital Image Processing on Machined Surfaces: A Review

    Article • January 2023, Springer Science + Business Media

    Dr. Mohan Kumar Pradhan

  20. Coupled Temperature Displacement Finite Element Analysis of Friction Welding of Similar and Dissimilar Metals

    Article • January 2023, Springer Science + Business Media

    Dr. Mohan Kumar Pradhan

  21. Optimisation of EDMed fly ash and rice husk ash reinforced hybrid Al-based composite using improved COPRAS and entropy method

    Article • International Journal of Manufacturing Research, January 2023, Inderscience Publishers

    Dr. Mohan Kumar Pradhan

  22. Optimization Techniques Used in Machining Processes: A Review

    Article • January 2023, Springer Science + Business Media

    Dr. Mohan Kumar Pradhan

  23. Parametric Optimization of the EDM Using a Genetic Algorithm on Machining of Al7075/SIC/WS2 Composites

    Article • January 2023, Springer Science + Business Media

    Dr. Mohan Kumar Pradhan

  24. Recent Advances in Materials and Manufacturing Technology

    Article • January 2023, Springer Science + Business Media

    Dr. Mohan Kumar Pradhan

  25. Finite element modelling for electrical discharge machining of Ti-6Al-4V alloy and multi-objective optimisation using response surface modelling

    Article • International Journal of Simulation and Process Modelling, January 2023, Inderscience Publishers

    Dr. Mohan Kumar Pradhan

  26. An ANFIS modelling and genetic algorithm-based optimization of through-hole electrical discharge drilling of Inconel-825 alloy

    Article • Journal of Materials Research, November 2022, Springer Science + Business Media

    Dr. Mohan Kumar Pradhan

  27. V. K. Jain (Ed.) (2014). Introduction to Micromachining (second edition). New Delhi, India: Narosa Publishing House. 624 pp. $43.12 (Paperback), ISBN: 978-81-8487-361-0.

    Article • Journal of Micromanufacturing, November 2022, SAGE Publications

    Dr. Mohan Kumar Pradhan

  28. Effect of different currents and compositions of Cu, MoS2 and HBN on the coating thickness of mild steel substrate using electric discharge coating

    Article • Materials Research Express, May 2022, Institute of Physics Publishing

    Dr. Mohan Kumar Pradhan

  29. Sustainable Machining of Nanocomposites

    Article • January 2022, Taylor & Francis

    Dr. Mohan Kumar Pradhan

  30. Conventional Machining of Nanocomposites

    Article • January 2022, Taylor & Francis

    Dr. Mohan Kumar Pradhan

  31. Intelligent Machining of Nanocomposites

    Article • January 2022, Taylor & Francis

    Dr. Mohan Kumar Pradhan

  32. Advanced Machining of Nanocomposites

    Article • January 2022, Taylor & Francis

    Dr. Mohan Kumar Pradhan

  33. Introduction to Nanocomposites and Machining

    Article • January 2022, Taylor & Francis

    Dr. Mohan Kumar Pradhan

  34. Machining of Nanocomposites

    Article • January 2022, Taylor & Francis

    Dr. Mohan Kumar Pradhan

  35. Artificial Neural Network Training Algorithms in Modeling of Radial Overcut in EDM

    Article • January 2022, IGI Global

    Dr. Mohan Kumar Pradhan

  36. A Review on Advances in Friction Welding of Dissimilar Metals

    Article • January 2022, Springer Science + Business Media

    Dr. Mohan Kumar Pradhan

  37. Process Simulation of Electrical Discharge Machining: A Review

    Article • January 2022, Springer Science + Business Media

    Dr. Mohan Kumar Pradhan

  38. An integrated fuzzy AHP approach for optimisation of theory of failures of multi-directional composite laminates

    Article • International Journal of Simulation and Process Modelling, January 2022, Inderscience Publishers

    Dr. Mohan Kumar Pradhan

  39. EDM Process Optimization of Machining Parameters for Through Hole Making on HCHCR AISI-D7 Steel Using RSM

    Article • January 2022, Springer Science + Business Media

    Dr. Mohan Kumar Pradhan

  40. Identification of Lubricant Contamination in Journal Bearings Using Vibration Signature Analysis

    Article • January 2022, Springer Science + Business Media

    Dr. Mohan Kumar Pradhan

  41. Optimal selection of an AA8011 reinforced nano Si3N4 composite using multi criteria decision-making method

    Article • Materials Today Proceedings, January 2022, Elsevier

    Dr. Mohan Kumar Pradhan

  42. Powder Mixed Electrical Discharge Machining of EN 31 Steel

    Article • January 2022, Springer Science + Business Media

    Dr. Mohan Kumar Pradhan

  43. A Review on Tribo-Mechanical Behaviour and Corrosion Performance of AA8000 Based Composites

    Article • December 2021, Springer Science + Business Media

    Dr. Mohan Kumar Pradhan

  44. Effect of Various Process Parameters of EDC on Mild Steel Substrate and their Properties

    Article • October 2021, Springer Science + Business Media

    Dr. Mohan Kumar Pradhan

  45. Hybrid ANFIS-Rao algorithm for surface roughness modelling and optimization in electrical discharge machining

    Article • Advances in Production Engineering & Management, June 2021, Production Engineering Institute (PEI), Faculty of Mechanical Engineering

    Dr. Mohan Kumar Pradhan

  46. Decision making on the machining parameters of Electrical Discharge Machined AISI D2 tool steel by AHP and PROMETHEE method

    Article • IOP Conference Series Materials Science and Engineering, March 2021, Institute of Physics Publishing

    Dr. Mohan Kumar Pradhan

  47. Ananya Algorithm: A Simple and New Optimization Algorithm for Engineering Optimization

    Article • January 2021, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Mohan Kumar Pradhan

  48. A New Constrained-Based Multiobjective Optimization Method for Electric Discharge Machining

    Article • January 2021, Springer Science + Business Media

    Dr. Mohan Kumar Pradhan

  49. Mechanical and Tribological Behavior of Al7075/SiC/WS2 Stir Casting Fabricated Composite with Optimization of EDM Parameters

    Article • January 2021, Springer Science + Business Media

    Dr. Mohan Kumar Pradhan

  50. Comparative Aerodynamics Analysis of Maruti Suzuki Alto Models

    Article • July 2020, Springer Science + Business Media

    Dr. Mohan Kumar Pradhan

  51. Study and analysis of WO-CO Turning Tool Using Finite Element Method

    Article • IOP Conference Series Materials Science and Engineering, March 2020, Institute of Physics Publishing

    Dr. Mohan Kumar Pradhan

  52. Optimisation of EDM process parameters using Jaya Algorithm

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr. Mohan Kumar Pradhan

  53. Tribological Behavior, Machinability, and Optimization of EDM of AA-2014 Hybrid Composite Reinforced With SiC and Glass Particulates

    Article • January 2020, IGI Global

    Dr. Mohan Kumar Pradhan

  54. Optimization of relative wear ratio during EDM of titanium alloy using advanced techniques

    Article • SN Applied Sciences, December 2019, Springer Science + Business Media

    Dr. Mohan Kumar Pradhan

  55. Modelling and Simulation of Deep Drawing Process of Circular Cup on AL1200 Using Finite Element Analysis

    Article • November 2019, Springer Science + Business Media

    Dr. Mohan Kumar Pradhan

  56. Radial Over Cut Optimization of Titanium Alloy for Electric Discharge Machining using Advanced Optimization Technique – Jaya Algorithm

    Article • International Journal of Engineering and Advanced Technology, August 2019, Blue Eyes Intelligence Engineering and Sciences Engineering and Sciences Publication - BEIESP

    Dr. Mohan Kumar Pradhan, Blue Eyes Intelligence Engineering and Sciences Blue Eyes Intelligence Engineering and Sciences Publication

  57. Optimization of Process Parameters for Electrical Discharge Machining of Al7075-B4C and TiC Hybrid Composite Using ELECTRE Method

    Article • August 2019, Taylor & Francis

    Dr. Mohan Kumar Pradhan

  58. EDM Parameters Optimization on Tool Wear Rate using Advanced Optimization of Titanium Alloy

    Article • International Journal of Mechanical and Production Engineering Research and Development, January 2019, Transstellar Journal Publications and Research Consultancy Private Limited

    Dr. Mohan Kumar Pradhan

  59. Process Parameters Optimization of Electrical Discharge Machining of Al7075/SiC/WS2 by Using MCDM

    Article • January 2019, Springer Science + Business Media

    Dr. Mohan Kumar Pradhan

  60. Experimental Investigation of EDM Parameters on Al-LM6/SiC/B4C Hybrid Composites

    Article • Applied Mechanics and Materials, February 2018, Trans Tech Publications

    Dr. Mohan Kumar Pradhan, Manish Shukla

  61. Characteristic behaviour of aluminium metal matrix composites: A review

    Article • Materials Today Proceedings, January 2018, Elsevier

    Dr. Mohan Kumar Pradhan

  62. Multi Response optimization of injection moulding Process parameters to reduce cycle time and warpage

    Article • Materials Today Proceedings, January 2018, Elsevier

    Dr. Mohan Kumar Pradhan

  63. Optimization of Theory of Failures of Multi-directional Composite Laminates: AHP approach

    Article • Materials Today Proceedings, January 2018, Elsevier

    Dr. Mohan Kumar Pradhan

  64. Optimization the machining parameters by using VIKOR Method during EDM process of Titanium alloy

    Article • Materials Today Proceedings, January 2018, Elsevier

    Dr. Mohan Kumar Pradhan

  65. A new multi-response Jaya Algorithm for optimisation of EDM process parameters

    Article • Materials Today Proceedings, January 2018, Elsevier

    Dr. Mohan Kumar Pradhan

  66. Experimental investigation of mechanical properties of high-temperature Ni-based super alloy by varying the wt. % of aluminium

    Article • International Journal of Microstructure and Materials Properties, January 2018, Inderscience Publishers

    Dr. Mohan Kumar Pradhan

  67. Modelling and optimisation of end milling parameters on Ti-6Al-4V titanium alloy using TLBO algorithm and TOPSIS algorithm

    Article • International Journal of Machining and Machinability of Materials, January 2018, Inderscience Publishers

    Dr. Mohan Kumar Pradhan

  68. Optimisation of EDM process for MRR, TWR and radial overcut of D2 steel: a hybrid RSM-GRA and entropy weight-based TOPSIS approach

    Article • International Journal of Industrial and Systems Engineering, January 2018, Inderscience Publishers

    Dr. Mohan Kumar Pradhan

  69. Experimental investigation of mechanical properties of high-temperature Ni-based super alloy by varying the wt. % of aluminium

    Article • International Journal of Microstructure and Materials Properties, January 2018, Inderscience Publishers

    Dr. Mohan Kumar Pradhan

  70. Application of Computational Analysis for Risk Assessment of Chlorine Gas from Tank in Chlorine Production Unit: A Case Study

    Article • January 2018, Springer Science + Business Media

    Dr. Mohan Kumar Pradhan

  71. Prediction of seasonal summer monsoon rainfall over homogenous regions of India using dynamical prediction system

    Article • Journal of Hydrology, March 2017, Elsevier

    Dr Gibies George, Dr. Mohan Kumar Pradhan

  72. Analysis of railway wheel to study crack initiation due to thermal loading and calculating life cycle

    Article • Materials Today Proceedings, January 2017, Elsevier

    Dr. Mohan Kumar Pradhan

  73. Applications of TLBO algorithm on various manufacturing processes: AReview

    Article • Materials Today Proceedings, January 2017, Elsevier

    Dr. Mohan Kumar Pradhan

  74. Effect of rice husk ash on properties of aluminium alloys: A review

    Article • Materials Today Proceedings, January 2017, Elsevier

    Dr. Mohan Kumar Pradhan

  75. Fault detection analysis in rolling element bearing: A review

    Article • Materials Today Proceedings, January 2017, Elsevier

    Dr. Mohan Kumar Pradhan

  76. Hybrid Cellulose Bionanocomposites from banana and jute fibre: A Review of Preparation, Properties and Applications

    Article • Materials Today Proceedings, January 2017, Elsevier

    Dr. Mohan Kumar Pradhan

  77. Modeling and optimization of electrical discharge machining process using RSM: A review

    Article • Materials Today Proceedings, January 2017, Elsevier

    Dr. Mohan Kumar Pradhan

  78. Review on modelling and optimization of electrical discharge machining process using modern Techniques

    Article • Materials Today Proceedings, January 2017, Elsevier

    Dr. Mohan Kumar Pradhan

  79. Fault Detection Using Vibration Signal Analysis Of Rolling Element Bearing In Time Domain using an Innovative Time Scalar Indicator

    Article • International Journal of Manufacturing Research, January 2017, Inderscience Publishers

    Dr. Mohan Kumar Pradhan

  80. Investigation of mechanical properties and electrical discharge machining of LM25-RHA metal matrix composite

    Article • International Journal of Machining and Machinability of Materials, January 2017, Inderscience Publishers

    Dr. Mohan Kumar Pradhan

  81. Fault detection using vibration signal analysis of rolling element bearing in time domain using an innovative time scalar indicator

    Article • International Journal of Manufacturing Research, January 2017, Inderscience Publishers

    Dr. Mohan Kumar Pradhan

  82. Handbook of Research on Manufacturing Process Modeling and Optimization Strategies

    Article • January 2017, IGI Global

    Dr. Mohan Kumar Pradhan

  83. Investigation of mechanical properties and electrical discharge machining of LM25-RHA metal matrix composite

    Article • International Journal of Machining and Machinability of Materials, January 2017, Inderscience Publishers

    Dr. Mohan Kumar Pradhan

  84. Pattern recognition techniques for evaluating the spatial impact of copper mining on surface waters

    Article • International Journal of Environmental Science and Technology, September 2016, Springer Science + Business Media

    Dr. Mohan Kumar Pradhan

  85. Morphology and mechanical properties of sisal fiber and nano cellulose green rubber composite: a comparative study

    Article • International Journal of Plastics Technology, September 2016, Springer Science + Business Media

    Dr. Mohan Kumar Pradhan

  86. plastic moulding

    Article • Materials Science Forum, September 2015, Trans Tech Publications

    Dr. Mohan Kumar Pradhan, GURJEET SINGH

  87. Modelling and Simulation of Temperature and Stress Analysis in TIG Welding Process

    Article • Materials Science Forum, September 2015, Trans Tech Publications

    Dr. Mohan Kumar Pradhan

  88. Failure prediction theories for multi dimensional composites laminates

    Article • Materials Science Forum, September 2015, Trans Tech Publications

    Dr. Mohan Kumar Pradhan, ASHUTOSH MISHRA

  89. Application of a general regression neural network for predicting radial overcut in electrical discharge machining of AISI D2 tool steel

    Article • International Journal of Machining and Machinability of Materials, January 2015, Inderscience Publishers

    Dr. Mohan Kumar Pradhan

  90. CONCEPT ON SINGLE ACTUATING BRAKING SYSTEM FOR TWO WHEELER

    Article • International Journal on Design and Manufacturing Technologies, January 2015, Sathyabama University

    Dr. Mohan Kumar Pradhan

  91. Optimization of Surface Roughness in EDM for D2 Steel by RSM-GA Approach

    Article • Universal Journal of Mechanical Engineering, June 2014, Horizon Research Publishing Co., Ltd.

    Dr. Mohan Kumar Pradhan

  92. Optimization of MRR, TWR and surface roughness of EDMed D2 Steel using an integrated approach of RSM, GRA and Entropy measutement method

    Article • April 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Mohan Kumar Pradhan

  93. Estimating the effect of process parameters on MRR, TWR and radial overcut of EDMed AISI D2 tool steel by RSM and GRA coupled with PCA

    Article • The International Journal of Advanced Manufacturing Technology, February 2013, Springer Science + Business Media

    Dr. Mohan Kumar Pradhan

  94. ANN modelling for surface roughness in electrical discharge machining: a comparative study

    Article • International Journal of Service and Computing Oriented Manufacturing, January 2013, Inderscience Publishers

    Dr. Mohan Kumar Pradhan

  95. Estimating the effect of process parameters on surface integrity of EDMed AISI D2 tool steel by response surface methodology coupled with grey relational analysis

    Article • The International Journal of Advanced Manufacturing Technology, December 2012, Springer Science + Business Media

    Dr. Mohan Kumar Pradhan

  96. Experimental investigation of insulation parameters affecting power transformer condition assessment using frequency domain spectroscopy

    Article • IEEE Transactions on Dielectrics and Electrical Insulation, December 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Mohan Kumar Pradhan

  97. Multi-Objective Optimization of MRR, TWR and Radial Overcut of EDMed AISI D2 Tool Steel Using Response Surface Methodology, Grey Relational Analysis And Entropy Measurement

    Article • Journal for Manufacturing Science and Production, April 2012, De Gruyter

    Dr. Mohan Kumar Pradhan

  98. Fabrication, Mechanical Characterization and FTIR Spectroscopic Analysis of Fish Scale Reinforced Epoxy Composites

    Article • Advanced Materials Research, January 2012, Trans Tech Publications

    Dr AMAR PATNAIK, Dr. Mohan Kumar Pradhan

  99. Optimisation of surface integrity model using response surface methodology for EDMed AISI D2 tool steel

    Article • International Journal of Mechatronics and Manufacturing Systems, January 2012, Inderscience Publishers

    Dr. Mohan Kumar Pradhan

  100. Determination of optimal parameters with multi response characteristics of EDM by response surface methodology, grey relational analysis and principal component analysis

    Article • International Journal of Manufacturing Technology and Management, January 2012, Inderscience Publishers

    Dr. Mohan Kumar Pradhan

  101. FEM of Residual Stress of EDMed Surfaces

    Article • Advanced Materials Research, November 2011, Trans Tech Publications

    Dr. Mohan Kumar Pradhan

  102. Response Surface Analysis of EDMED Surfaces of AISI D2 Steel

    Article • Advanced Materials Research, June 2011, Trans Tech Publications

    Dr. Mohan Kumar Pradhan

  103. Recurrent neural network estimation of material removal rate in electrical discharge machining of AISI D2 tool steel

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, March 2011, SAGE Publications

    Dr. Mohan Kumar Pradhan

  104. Multi-response optimisation of EDM of AISI D2 tool steel using response surface methodology

    Article • International Journal of Machining and Machinability of Materials, January 2011, Inderscience Publishers

    Dr. Mohan Kumar Pradhan

  105. Effect of process parameters on surface roughness in EDM of tool steel by response surface methodology

    Article • International Journal of Precision Technology, January 2011, Inderscience Publishers

    Dr. Mohan Kumar Pradhan

  106. Neuro-fuzzy and neural network-based prediction of various responses in electrical discharge machining of AISI D2 steel

    Article • The International Journal of Advanced Manufacturing Technology, February 2010, Springer Science + Business Media

    Dr. Mohan Kumar Pradhan

  107. A study on processing, characterization and erosion behavior of fish (Labeo-rohita) scale filled epoxy matrix composites

    Article • Materials & Design (1980-2015), August 2009, Elsevier

    Dr AMAR PATNAIK, Dr. Mohan Kumar Pradhan

  108. Comparisons of neural network models on surface roughness in electrical discharge machining

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, March 2009, SAGE Publications

    Dr. Mohan Kumar Pradhan

  109. PREDICTIVE MODELLING AND ANALYSIS OF SURFACE ROUGHNESS IN ELECTRO-DISCHARGE MACHINING OF D2 TOOL STEEL USING REGRESSION AND NEURAL NETWORKS APPROACH

    Article • International Journal on Design and Manufacturing Technologies, January 2009, Sathyabama University

    Dr. Mohan Kumar Pradhan

  110. Trends and perspectives in industrial maintenance management

    Article • Journal of Manufacturing Systems, January 1997, Elsevier

    Dr. Mohan Kumar Pradhan

  111. Artificial Neural Network Modeling for Electrical Discharge Machining Parameters

    Article • IGI Global

    Dr. Mohan Kumar Pradhan

  112. Optimisation of Machining Parameters in Electrical Discharge Machining of LM25-RHA Composites

    Article • IGI Global

    Dr. Mohan Kumar Pradhan

  113. Development of Hybrid Cellulose Bio Nanocomposite From Banana and Jute Fiber

    Article • IGI Global

    Dr. Mohan Kumar Pradhan

  114. Modelling and analysis of cold drawing process

    Article • IGI Global

    Dr. Mohan Kumar Pradhan, Praveen Kumar Loharkar

  115. Artificial Neural Network Training Algorithms in Modeling of Radial Overcut in EDM

    Article • IGI Global

    Dr. Mohan Kumar Pradhan

  116. Fault Detection Through Vibration Signal Analysis of Rolling Element Bearing in Time Domain

    Article • IGI Global

    Dr. Mohan Kumar Pradhan

  117. Modelling and Optimization of End Milling Process Using TLBO and TOPSIS Algorithm

    Article • IGI Global

    Dr. Mohan Kumar Pradhan